Help@ My phone wont start!

Help ! my phone wont restart because i left my house before update was complete. it just shows an itunes circle and plug in cord:(

That means it has gone into recovery mode and must be restored by using the recovery mode to connect to a computer running iTunes, per the instructions in http://support.apple.com/kb/HT1808 and summarized:

Similar Messages

  • Im up dating my i phone to iOS 6 then my baterry completely drain i forget to plug my charger,when i re charged my battery for 12 hrs my i phone wont start again i try to conect to my computer but it cant be read also.pls help

    im up dating my i phone to iOS 6 then my baterry completely drain i forget to plug my charger,when i re charged my battery for 12 hrs my i phone wont start again i try to conect to my computer but it cant be read also.pls help

    Thanks too all the people who responded. . . . (noone)
    Got it sorted though. Seems that Apple has issues with multiple apple id's.
    Seems i had to somehow remember and use the original id i had when i first bought my 1st iPhone. . . .
    Even after that it was extremely hard to get my apps back on my PC.
    If anyone else has the same problem. . . .email Apple. Cya.

  • After a phone reset,apple logo appears but phone wont start

    After a phone reset,Apple logo appears on screen,but phone wont start!!

    That hapened to me and this fixed it. I dont know what it does or how it works so dont hold me accountable but it worked for me
    Entering DFU Mode (Official Instructions)
    Plug your device into your computer.
    Turn off the device.
    Hold the Power button for 3 seconds
    Hold the Home button without releasing the Power button for 10 seconds
    Release the Power Button but keep holding the Home button
    Keep holding the Home button until you are alerted by iTunes saying that it has detected a device in Recovery Mode
    Make sure the device screen is blank and no logos are present
    Exiting DFU Mode
    Hold Home and Power Button till the Apple Logo appears
    ~Jordan

  • Help my powerbook wont start

    Im having trouble starting my powerbook. When I turn on the computer first I see a folder with the question mark, then a grey screen with a black square in the middle saying that i need to restart my computer. I know its a Kernel panic. I tried to use the disk utility to repair it. It repairs but it still wont start up. I tried re-installing the software and it cant find a drive to install it. I try to turn it on in safe mode and a bunch of information about the kernel appears and at the end it says "panic: We are hanging here. . ." So i dont know what to do. Can someone help me please. Thank you so much.

    It could be your ram. Inspect that is in place properly.

  • Help please PC wont start after i combined double sided and singlesided RAM

    Can anyone help me please. I have a neo2 platinum board and 3200+ cpu. i used to have 2 X  512MB(double sided) ddr400 Ram PH brand. When i bought and added NCP brand 2 X  512MB(single sided) my PC wont start anymore. It just powers up for 1/2 a second then dies. I tried putting back my old RAM and resetting the BIOS but it still wont start.

    thanks everyone i have isolated the problem...the culprit is the psu  i have another problem though, after i bought a new psu, the vga card is not detected from time to time...i also get the BSOD upon exiting windows and I cannot access the BIOS, it just freezes after I press the DEL key.

  • My iphone 4 is not recognized by itunes when i connect to it, wants me to restore to factory settings. after i agree , an alert with error 9 stopped the sync. the phone wont start

    my iphone 4 is not recognized by itunes when i connect to it and tells me that the phone is in recovery mode, wants me to restore to factory settings. after i agree , an alert with error 9 stopped the sync. the phone wont start

    Thanks for the response. There is no cloud icon next to them. All of the songs play on the phone still and no song was purchased through iTunes. I added them manually and tried to remove them manually. According to my iTunes they've been removed but they are still on my phone and working.

  • Help - my MacBook wont start?

    The led is on but the machine wont start up?
    I have tryed to hold the powerbutton down and violet close, but when I try to start up, the same problem appears :-(

    I think you'll need to tell us a bit more: MacBook model, and what exactly happens.
    For example, you're posting here under "MacBook Air" but refer to an LED... which the MBA doesn't have.
    After holding down the Power button for a while (which shuts down the Mac no matter what), is that LED still on?
    When you attempt to start it, can you hear the start-up gong?
    Does the screen remain dark, or do you get to see at least a grey screen? If so, how far does it go before it stalls?

  • HELP--- HTTP Server wont start,

    I disabled the Webgate protecting port 8080 thats being used by OAM now my HTTP server wont start. Thoughts on getting it started. Here's the Enterprise manager HTTP_Server log entry.
    08/04/10 21:18:53 Start process
    [Thu Apr 10 21:18:57 2008] [debug] mod_oc4j.c(1667): Initializing OC4J connection cache size to 40
    [Thu Apr 10 21:18:57 2008] [debug] mod_onsint.c(1202): mod_onsint: after parsing OpmnHostPort directive, got a hostport with host:127.0.0.1, port:7200 and is_ssl:0.
    [Thu Apr 10 21:18:57 2008] [debug] www\src\modplsql\sosd\swwwap.c(1279): mod_plsql: plsql_create_server_config called
    fopen: No such file or directory
    Apache.exe: could not open document config file c:/program
    Thanks!

    I believe you have disabled the web gate in the OAM.But when a web gate is installed, it writes to the HTTP server httpd.conf file to as a part of installation and to redirect the requests on that server to the OAM. So Now if you revert back to the original conf file are the edition before the installation of web gate and try to start the same, you should be fine.

  • HT201210 phone wont start or restore fully HELP

    My iphone4s said no sim card. I restarted my phone and ever since then, It will show the apple icon for a long time, and then show a blank black screen, and will continue to cycle that way. Ive tried to recover it and it shows an unknown error has occred, and wont fully recover. HELP

    http://support.apple.com/kb/TS3694?viewlocale=en_US&locale=en_US
    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.

  • PLEASE HELP MY PHONE WONT TURN ON

    Last night I was walking in the rain and a bit of water may have got inside my phone, it was working fine whilst I was in the car, but when I got to my front door I threw it into my bag so it turned off.
    I left it about 20 minutes before I went back to it and I pressed the button to turn it on and I got the red light then the loading screen came up with the loading bar, the loading bar does not appear to move but the phone turns off after a couple of seconds and then repeats over and over again until I take the battery out, I tried taking the battery out many times and I'm still having the same issue.
    I tried again when I woke up this morning and still the same. But about 10 minutes ago when I turned it on the call, blackberry button, escape and escape and end call button started flashing then my phone started vibrating and then a white screen flashed and then it went off and went back to what it was doing before. 
    The bar moved slightly more then went off and hasnt done the same since.
    I have tried my brother battery and it does the same PLEASE HELP ME

    Hi and Welcome to the Community!
    I know it's been a bit since you posted this, but you never know.
    First off -- with moisture intrusion into a BB, the only thing that is predictable is that the results will be unpredictable. I've seen some come back with no problems, others never work again at all, and everything in between (e.g., work for a while before failing).
    Secondly, see this FAQ:
    http://www.blackberryfaq.com/index.php/Got_Your_Bl​ackBerry_Wet%3F
    It has recommended waiting periods that must be adhered to...no early checking. If the BB is not totally dry when it is powered on, that act can fry it...so waiting the full delay is critical.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • HELP ! DW8 wont start up ?????

    Please help, all of a sudden when i try to start up DW8 the
    program wont open...
    As you click on the icon for Dreamweaver to start ( as usual
    ) the splash screen showws up and goes through the normal motions
    then for some reason when it gets to "Initialising extension
    data..." it will not go further and the program wont open ????
    I have never seen this before and it is getting extremely
    annoying to say the very least !!!
    I even tried to uninstall and re-install, same problem. When
    the program initial splash screen is displayed it stops on
    "Initialising extension data..." ???
    PLEASE HELP !!!!!!!!!!!!!

    On Wed, 7 Feb 2007 07:55:11 +0000 (UTC), "reggiekray"
    <[email protected]> wrote:
    > I even tried to uninstall and re-install, same problem.
    When the program
    >initial splash screen is displayed it stops on
    "Initialising extension data..."
    >???
    Be patient - I replied to you the first time you posted this
    (about 10
    minutes ago!!!).
    Steve
    steve at flyingtigerwebdesign dot com

  • Phone wont start after i tried to update

    i have been trying to update the software on my Xperia V lt25i through my computer it kept failing now when i try to start it all i see is the SONY logo then it cuts off. need help?

    Download sony update service and retry the update:
    http://www.sonymobile.com/gb/tools/update-service/
    Charge the phone for 1 hour before.
    All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

  • HT1688 My phone wont start or charge

    Hey there apple employee tech person,
    My phone was on low battery and I was using my maps application when it died due to low battery. Now it will now start or charge. I cleaned out the lint from the charging dock. I've had it charge for about 20 minutes now. It won't start, it is an iPhone 4 refurbished and is less than a year in my possession. What should I do?!
    -Daniel McGavin

    Hey Leahb1,
    Thanks for using Apple Support Communities.
    Sounds like you are having trouble charging your iPhone. These two article are good resources to help resolve the issue.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    Have a nice day,
    Mario

  • Battery drained phone wont start up or charge

    i recently bought a curve 9360 about 5months ago. recently my battery drained and the phone shut down, when i plugged the charger in the red led stays on for about 10-20 secs then goes off. is my phone still charging but just wont turn on? or could there be a problem with my phone as my charger works in other phones

    Try removing the battery to try and reboot the device. It's possible that something else went wrong with the device. If that doesn't work I would contact your wireless service provider.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • Help... wont start up, freezes with spinning spectrum

    My Mac displayed the spinning spectrum icom while my son was browsing online. I couldn't force quit or restart at all, I had to switch off the power but when it starts it gets past the grey screen with apple logo, turns to the blue screen but then back to grey with the arrow cursor at top left corner but it doesn't move with the mouse - the spinning spectrum also appears and that moves with the mouse! I've switched off at mains 3 yimes now, the last time was before I went out, for 6 hours and it still does the same!
    It's 10.6.8. Appreciate any help, really don't know what to do apart from start up from install disk??
    Thanks

    Zap PRAM/NVRAM is holding down 4 keys and kept down in addition to RESET SMC:
    Unplugging everything, and power, and holding the power on button in for 5-10 seconds to reset the SMC then releasae and reconnect everything. And then start power on booting.
    I have heard of logicboards so rare and usually it is not. graphics, yes, PSU in 2008 maybe.
    Remove all the disk drives, just slide them half way out.  
    When you do those hard restarts and pulling power, force the system shutdown, it can harm the directory of the disk drives.
    Killing power by pulling the plug or power is never good or helpful. Having a Mac Pro, put it on a good solid UPS will protect and likely extend its life and usefulness.
    Having offline backups with your system, essential. Get in the habit of cloning and having multiple backup sets and methods, like TimeMachine plus SuperDuper or Carbon Copy Cloner.
    http://macperformanceguide.com/Mac-HowToClone-backup.html
    http://macperformanceguide.com/Mac-HowToClone.html
    http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
    Got a fresh disk drive? get out your SL 10.6 DVD and format and install the system, or try to.

Maybe you are looking for