Help! My printer will not print since installing Windows 7 upgrade.

I currently have an HP4580 All in one wireless printer that will not print. Nothing goes to the queue. I have done all the HP troubleshooting, including uninstalling and reinstalling the device. Everything shows that it is working properly and is recognized on the network. I have run out of ideas. Can anybody help me?
Karen
Karen

Is this the Deskjet F4580, the Officejet J4580 or the Photosmart C4580? I would suggest going to the HP site and downloading the proper driver and updates for Windows 7. Before installing the new software uninstall the previous version.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

My HP Photosmart Printer/Scanner will not scan since installing Maverick help

Since installing Maverick my HP printer/scanner will not scan documents print or save them, how can I fix this?

this worked for my HP printer/scanner:
Try:
uninstall all printer manufacturer apps and "utilities"
go to System Preferences > Printers & Scanners > Print
if your printer is there in the column on the left:
control-click on your printer
select "Reset Printing System..." and "reset" in the dialog that follows
if your printer is not in the column on the left, go to the next step.
do a factory reset on your printer. You'll have to consult the printer manual for how.
if you connect to your printer/scanner via wifi, reset the wifi system:
power down everything: modem, router, computer, and printer
power up each item in turn in the same order: modem, router, computer, and printer. Let each power up completely before moving on to the next
enter your wifi password in your printer so it can connect to the network
if you do not connect via wifi, go to the next step
go back to printers & scanners and it should see your printer and download a driver for it from Apple.If it won't, then try going to the HP website and there may be a new software package for your printer that is compatible with Mavericks. Download and install it.

IPod Classic will not sync since installed iTunes 11

iPod Classic will not sync properly since installed new iTunes. Always stops at or around song 2 and just hangs there, even if left all night. Tried restoring the iPod, made no difference. Tried syncing just some songs, sometimes it will do 20 or so but not more than that - and I have 10,000 songs.
Saw something about problem with Winsock and reset that but no effect.
Recently been re-recording CDs in Apple Lossless with 'Convert to AAC' selected for iPod. Maybe the conversion process is causing the block? But it did not before.
I also tried moving the itunes material from the Synology NAS to the PC as I thought the processing power might be the problem. It synced once after that, now it is blocked again. Tonight I tried selecting only the original AAC files and it seems to have worked for them, my problem therefore seems to be the Apple Lossless - unless the syncing of AAC files is another one-off.
Not for the first time I wish I had not updated iTunes because it so often leads to problems of some kind. Why do they not care?
Any

Update: following successful sync of AAC files, I changed the setting to 'manual' for music & videos, used the View menu to restore the old sidebar, and manually added the Lossless files to the IPod. That actually seems to be working (very slowly). But it would be better if Sync worked as it should.

My video camera will not zoom since installing iOS 7

Since installing iOS 7 on my ipad retina the video will not zoom during recording. In iOS 6 I could zoom the recorded video.
Any answers please.

Me too. Since upgrading to iOS7, Siri gives me "I'm sorry about this..." MOST of the time. Fine on weather; 100%, but if I ask to send someone a message or text, it 'thinks' for a long time and eventually says "I'm really sorry about this". My friend's iPhone 5 works instantly, side by side; completely different yet same version of iOS and all settings same. I've tried everything: hard resets, switching Siri on and off, reset net prefs and all settings, even tried a different sim, everything I can think of, but Siri is still slow, unresponsive and 100% fails on complex tasks. Anyone any more ideas?

My gmail will not open since installing ff4

how can it be of help to send me anything to an email address that i can no longer access since installing ff4

Me too. Since upgrading to iOS7, Siri gives me "I'm sorry about this..." MOST of the time. Fine on weather; 100%, but if I ask to send someone a message or text, it 'thinks' for a long time and eventually says "I'm really sorry about this". My friend's iPhone 5 works instantly, side by side; completely different yet same version of iOS and all settings same. I've tried everything: hard resets, switching Siri on and off, reset net prefs and all settings, even tried a different sim, everything I can think of, but Siri is still slow, unresponsive and 100% fails on complex tasks. Anyone any more ideas?

My Siri will not open since installing iOS 7

Since installing iOS 7, my Siri won't work, and by won't work I mean won't even open. I've been into restrictions and also double ensured that Siri is turned on but still nothing. Frustrating is the word!!!
Anybody help?

Me too. Since upgrading to iOS7, Siri gives me "I'm sorry about this..." MOST of the time. Fine on weather; 100%, but if I ask to send someone a message or text, it 'thinks' for a long time and eventually says "I'm really sorry about this". My friend's iPhone 5 works instantly, side by side; completely different yet same version of iOS and all settings same. I've tried everything: hard resets, switching Siri on and off, reset net prefs and all settings, even tried a different sim, everything I can think of, but Siri is still slow, unresponsive and 100% fails on complex tasks. Anyone any more ideas?

Adobe Flash Player will not run since installing Firefox 25.0 upgrade

Windows 7 Home Premium X64.
My question says it all. Within Firefox's own system it says the flash player is update and enabled. Any place I go today and want to play something the page posts "Get Adobe Flash Player". I upgraded to Firefox 25.0 just before I retired for the night. Today Flash Player will not work.
Within Tools>Options>Content the option to turn java off and on is no longer there. I believe you folks have CREATED A BIG BUG!!!!!

Your statement: "I missed that Firefox 25 turned on "click to play" as the default behavior for plugins. I assume you prefer to have Flash run automatically if you've approved the site in NoScript."
I didn't read anything anywhere, nor was I aware of the fact that Firefox may have changed "my" plugin settings, or broken them. How many users do you think there might be that have NoScript set this way for one or more sites.
I'm just saying it might have been nice to have been forewarned about this - obviously something that was KNOWN that the update was going to do!!!!!!!!!!!!!!!

Envy 15 laptop will not shutdown after installing windows 10

After installing windows 10, laptop will not shutdown , and cannot wake from sleep mode. I have to hold power button in to turn off .

corsairman wrote:
I just upgraded my laptop to Windows 7 and was advised to upgrade my printer driver for the Photosmart 3210 to a Windows 7 driver. After installing my printer will not duplex. On the printer preference page the box shows two sided duplexing (two sided).
Can you help, also when I had Vista installed the 2nd page printed upside down. I have tried to get the patch for this, but cannot find it.
You may need to enable the duplexer hardware as described in the Vista Duplex Printing Troubleshooting Guide. There is also a link there to the patches for Vista back side upside down. When you have the duplexer enabled please post here about the results printing a duplex page. If the back side is upside down the Vista patch can be applied.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Boot Camp will not let me install Windows via external hard drive

Hi,
I'm having problems installing Windows 7 on my MacBook Pro. I have the iso file on my external hard dirve and have went to Boot Camp but the following message comes up:
"The startup disk cannot be partitioned or restored to a single partition.
The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows."
At one point i just clicked OK and let Boot Camp install the selected tasks, which formated the disk, copied the Windows files and downloaded the Windows support software but another message came up:
"Install this Windows support software after installing Windows"
It then only gives me an option to Quit...
I would like to add that i tried to install Windows a few days ago and everything was working well up until instead of clicking on "customize" to continue the installation i clicked on "upgrade" then it asked me to remove disk and reboot the computer, i did that and it didn't work. Luckily i got that sorted but wanted to try and install Windows again as it didn't end up getting it installed and this is what is happening now...
Can someone suggest to me what might be wrong?
Thanks in advance.

My other post has been deleted. I will reply to you on this post instead.
I dragged down the Macintosh HD partition via the small triangle at the bottom right hand side of it. It now looks like this:
Is it back to normal now? Can i install Windows now or do i need to do anything else?
Thanks a lot for your help!

Photoshop will not open after installing window's 7 updates

I'm in a bit of a dilema, any help is appreciated. My Windows 7 has updates. When it does this, Photoshop will not run. I have reverted the PC back before the update and Photoshop runs fine. The only thing is that the PC will update itself unless I turn the automatic updates off. Does anyone have a fix for this? Photoshop CS2, running on Windows' 7 Home Deluxe edition.
Thank you,
Tony

This is the error message I am receiving. A window pops up when I try to run Photoshop. At the top of the window is the directory entry
C:\Program Files (x86)\Adobe\Adobe Photoshop CS3\Photoshop.exe
X Windows cannot access the specified device, path or file. You may not have the appropriate permissions to access the item.
The only problem is that there is no access permissions. I just did the system update and now Photoshop will not run. Any help is appreciated.
Thank you,
tony

Ipod touch 16Gb not working since installing recent O4 upgrade

My Ipod touch 16GB has died !! It stopped during the update when an error message appeared stating unable to SYNC IPOD. Now all I have is a black screen with the Apple Logo, and then a bar appears across the screen underneath the logo as if its trying to install software and show amount of time left. This goes on and on until the battery goes flat !!! Help please

Hi amit,
Am not sure about an old product but yea i once went to get my earbuds replaced under warranty priod. There was some trouble with it and they replaced it. I asked the guy to give me the other earplugs with mic and i can pay the difference. They told that they can only replace the same product even if you have to pay or not.
May be an apple policy or Imagine own policy but that's what I think we can avail being apple users in India. Check for good places who repair iPod as am sure some do. No offence but I can take the chance of getting my ipod repaired from a third party after using it for a substancial amount of time. We all know its our inner feeling and warranty policies which normally hinders us.
But surely you can call Apple support at 18004250744 or Apple sales 1800 425 4646 and confirm about this policy. Also, you can mail Apple directly and check.
Rest if you want to stick to Apple reseller support itself then i would suggest to add a few more to that $230 amount and get the latest iTouch which now comes even in white and has innumerable new features. But never pay such a hefty amount and get the 1st gen itself.
Regards,
Amit

IPod not syncing since installing Windows 8.1

I've just installed Windows 8.1 (jumping up from Windows 7) on my PC. Installed iTunes, then plugged in my iPod. Sync never even started up, though iTunes did open when I plugged in the iPod. I checked under Devices and Printers and I see that there seem to be two instances of an iPod there - one under Devices, and one under Unspecified. When I unplug my iPod from the PC, the first instance disappears but the instance under Unspecified remains (it's called Apple Mobile Device USB Driver). The first instance, under Devices, calls itself "Apple iPod USB Device" and it returns when I plug the iPod back in, so that's the instance that seems to be associated with the actual iPod.
Apple iPod USB Device has a yellow exclamation point next to it, and when I check under Properties for it and and then check for Properties under the Hardware tab I see a "Windows is uninstalling this device (code 21) message. This message never goes away, and Windows never actually uninstalls it. I can choose uninstall, and have done so, but when I plug in my iPod again, all this simply comes back.
At one point earlier today, iTunes began to "sync," but what it was syncing to I have no idea, because the iPod remained exactly as it has been - no new songs, no message in its little window saying it was syncing or anything. The "sync" lasted quite a while, and then when it finally finished, absolutely nothing had changed in the iPod.
So, even though plugging in the iPod starts up iTunes, they're just not seeing/talking to each other.
I've run the iTunes diagnostic, and it says it finds the iPod, but it also says (with a green light next to it) no usb ports found and (with a green light next to it) no firewire (IEEE 1394) ports found. It says All Tests Passed.

I had the same symptoms and similar recreation steps.
Updating the Apple Mobile USB device driver spelled out in step #2 http://helpios7.com/trust-this-computer-pop-up-fix/ fixed the problem for me.

Organizer 8 will not launch after installing Windows 8

I have PSE 8,0 and it was running just fine. Now I have installed Windows 8 and I can't open the organizer? Is there an explanation of this?
Message title was edited by: Brett N

Generally, if you have PSE installed and then upgrade your OS over the top of the old one, you will have to recreate the application settings. Go to C:\Users\[User Name]\Appdata\Roaming\Adobe\Elements Organizer\8.0\ and delete the Organizer folder and try again.

LAN not working since installing Windows XP on Satellite P100-160

Hi,
I purchased a P100-160 (PSPAAE - 01D00UEN) with Vista pre-installed. Couldn't stand Vista so I have just installed Windows XP.
However, I cannot get my LAN to work properly. That is, I can get it to work with the 'Cardbus Ethernet Card' plugged in, but i cannot get it to work via the RJ-45 slot!
Does anyone have any idea what I can do/how I can rectify this.
Many thanks
Yvonne

Hi
Thanks for your reply.
As far as I am aware I have downloaded all the drivers. I have checked both of the sites that you indicated, I have downloaded the drivers but there does not seem to be a 'setup' icon/file within the extrated files. There are 'unistaller' files but not a setup one - anyone have any ideas????
Do you suggest that I install all the drivers from scatch and see what happens? Any other suggetions would be very much appreciated.
Best regards
Yvonne
Message was edited by: yhart

Audio will not work after a Windows 7 upgrade.

Hello
I have recently Installed Windows 7 to my Lenovo 3000 N100 Type- 0768, 6XG. Everything works perfectly accept for the sound. I have tried to install different audio drivers to see if anything works. I have also been on other forums to see if this is a common problem. It seems that some people get their sound working and others don't.
Does anyone know what sound driver I should be using?
Could there be another problem which I don't see?
Is the best bet for me to restore my computer to factory settings!?
Please help me.
Thanks
Luke

have you tried to install drivers manually?
after you locate the .inf file for the driver that you want to install, manually install the new driver. to do this, follow these steps:
- click start, right-click computer, and then click properties.in the tasks pane, click device manager.
- if you are prompted for an administrator password or confirmation, type your password or click continue.
- in device manager, locate the device for which you want to install the driver.
note to display hidden devices, click show hidden devices on the view menu.
- right-click the device, and then click update driver software.
- click browse my computer for driver software, click let me pick from a list of device drivers on my computer, and then click have disk.
- in the install from disk dialog box, click browse, locate an .inf file for the device driver that you want to install, and then click open.
- follow the steps in the update driver software devicename dialog box to update the driver

Help! My printer will not print since installing Windows 7 upgrade.

Similar Messages

Maybe you are looking for