Help my screen is just blank like a grey?? i cant see anything not even apple sign
help my screen is just blank like a grey?? i cant see anything not even apple sign
Try a reset by pressing and holding the Home and Power buttons until the white Apple logo appears.
Similar Messages
-
After updating to latest iOS my iphone 4 is mute, at start the other party couldn't hear me, now I cant hear anything not even the ringing tone. This happens only if make regular calls through my carrier. If use viber all ok. Help please?
I read on another discussion that sucking air out of the headphone slot works, I tried it and guess what, it worked.......weired....apparently something to do with moisture accumulation....!!!!!!
-
HT1338 My ipod froze up. I cant do anything not even turn it off.HELP.
My ipod froze. I can not torn it off. I cant do anything. It has changed pic and dates by itself. Is it dead? Do I need to get a new one? If you could help me figue this problem out it would be Greatly Appreciated.
If not successful try the remaining items of:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
In the prior version of Firefox before I was encouraged to download the newest version... when I would open a new tab: on the blank page below would appear thumbnail versions of web sites I had frequented which was awesome to return to sites without even going to bookmarks. Now when I open a new tab it is just a blank white screen beneath. Is there something I can do to make thumbnails appear again on the screen below when I open a new tab?
You can change this in Firefox's about:config preferences editor.
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''newtab''' and pause while the list is filtered
(3) Double-click the '''browser.newtab.url''' preference and enter the desired value:
''(i) Page thumbnails (default)''
about:newtab
''(ii) Blank tab''
about:blank
''(iii) Built-in Firefox home page''
about:home
''(iv) Any other page''
full URL to the page
Press Ctrl+t to open a new tab and verify that it worked. Fixed? -
Why is my ipod battery not charging,the screen is just blank
my ipod is not charging,the screen is just blank.i put it on,but not is showing on the screen.even though i chared it for hours.
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
was working fine, today I startup and all seems normal but after the apple logo it just won't start, the screen is just blank.
Hi there,
Does it boot with the Option/alt key held down & show boot choices?
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Tiger Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes. -
Good morning friends, I have a problem with my iphone 4s since I get a screen that just light it says "Activation Required" restored it and not corrected, I bought my factory unlocked iphone, how I can fix this, I had installed the version 6.0 as developer to
If you have a beta copy of iOS6
1. You are a developer and will know how to transition from beta
to release version and to use the Develpoer forum
2. You have a pirate copy of the beta and no-one on this Apple hosted Forum can help you
try Google -
Yesterday i just try to open my iPad but i had a black screen. I can hear it working but i cant see anything. I tried all kinds of restore reset everthing but i still got a black screen. Anyone has the same problem and got a sollution? Thanks in advance..
See this Discussion
https://discussions.apple.com/message/19521062
The principle is the same... -
My Ipod kinda works it just has a white screen and i cant see anything.
I can turn it on and slide it to unlock i can just to that from memory but it is white and you cant see anything but white. it also lets me play music but nothing else
have you tried the troubleshooting hints:
http://www.apple.com/support/ipodtouch/troubleshooting/ipodtouch/ -
i have an ipod tough 3g and its like about 4 to 5 years old it works perfectly fine except the home button is abit messed up and the ipod sometimes crashes. but other than that everything is fine. so i was watching something on an app and then al of a sudden i dont see the video i can just hear it. i then think its just the app but when i go on youtube the same exact thing happens. you click to watch a video and you can hear it perfectly but you cant see anything. the screen is just black when u ONLY watch a video. this happened last night so yea.i really hope somebody can help me figure out how to fix this and whats wrongwith it:)
thanks for your time and help!
Noor .T.When it goes black do a very short press of the button on the right upper side of the phone and the screen will reappear. Make it a very short quick press.
OTOH, if you are using the speaker so you can watch the screen as you are talking when it goes dim touch the screen anywhere that it is blank and it will again go bright. On long calls you have to repeat this.
Many folks have had the same problem you described and what I have told you is the best and ONLY way around the screen going blank during a call.
JerryF -
Help! -Itunes wont sync, Set-Up Assistant pops up, Cant see iPod contents..
I have several problems happening at once - please help if you can!
When I connect to iTunes, my iPod starts to sync, but then I get an error message "Cannot synchronize ----'s iPod. Unknown Error (-48)"
It then jumps straight to the Set Up Assistant, as if its the first time I've connected my iPod! (I've had it for a year now). I'm too scared to go through that option in case it wipes the music/video off my iPod.
After all this, my iPod's name Imine) is actually visible in the left side panel of iTunes - BUT, i cant see any of the contents ie songs, video etc.
Funny thing is, I can still load songs & video onto the iPod, and it synchronizes and saves. But, I just cant see anything thats on the iPod (meaning I cant edit or delete, which is annoying), as iTunes only recognizes it as a brand new ipod.
So, what can I do?
I've tried to reset the Ipod, and reloaded iTunes. I've even used an earlier version of iTunes on a different computer and the exact same thing happens there (which leads me to believe somehting happened to the iPod).
I dont want to restore the iPod - I have nearly filled the 160GB capacity and I simply cannot back it up anywhere as no computer i have has enough memory and all my original music is overseas at home.
Why is itunes not recognising the ipod, but it still saves data on it??? How can I bypass the Set Up assistant?? (its irritating).
Please help!!
JJ LAI am also having the same problem. This is my second ipod (I've added a shuffle and already had a nano). The nano works fine. When I connect the shuffle, it is grayed out in the left pane. The main view only shows two tabs, Settings and Contents. It doesn't seem to matter how I have the syncing setup.
-
How do I restore photos from iPhone 5 to iPhoto. I erased all my events in iPhoto by mistake so need to sync them phone upstream to lions 10.7....not even apple support could help?? I plug my phone into iPhoto and it sees the camera roll but none of my event so I can move them back into iPhoto
Your photos are gone. When you synch your phone with iPhoto, the actual picture file does not synch, rather is is a very small thumbnail file suitable for viewing on the phone, but of such small resolution that it's useless for anything other than viewing on the phone. In any case, Apple makes no way for you to retrieve these thumbnail file.
If you deleted photos from iPhoto, your only hope is if you have Time Machine or another backup that might have had those photos. Are they perhaps still in the "Trash" within the iPhoto app? -
Hello, a cant type anything ,not in photoshop and not in inIllustrator ,I've got a message like "selected font faild during last operation".If problem persists,please desable the font..
Looks like a corrupt font.
Illustrator is more picky about fonts than any other application. -
I am trying to retrieve my photos from my I phone 4s because the screen is smashed. The pc that I use is windows not an apple computer. Can anyone give me step by step instructions how I can get my photos? Also, I don't have icloud
If the iPhone is still working and the photos are in the Camera Roll (i.e., taken on the iPhone) then, when you connect the iPhone to your PC, it should be recognized as a Camera and Windows should start AutoPlay.
See this http://windows.microsoft.com/en-us/windows/get-pictures-camera-computer#1TC=wind ows-7 -
What can i do when my ipod screen goes white and i cant see anything?
Please! Somebody give me some advice on what to do when my ipod is white and i cant see anything? i can listen to music but i cant see what i am listening to?
If none of the usual 5 R's of troubleshooting do any good, you'll need to have the iPod either serviced or replaced as the LCD screen or ribbon cable is damaged or faulty.
http://www.apple.com/support/ipod/five_rs/nano3gen/
B-rock
Maybe you are looking for
-
Post Author: Andreas Hausjell CA Forum: .NET I'm using Crystal Reports X (Sp6) and Visual Studio 2005 C# I have got a very simple report with a barcode and following problems: 1. The printer I'm using is a Zebra PAX 110 which has got some internal ba
-
Table with dynamic columns is not being correctly refreshed
I am building a table view with maps of data according to the last section of this tutorial: http://docs.oracle.com/javafx/2/ui_controls/table-view.htm In my problem I need to add and delete rows and columns at runtime. Everything is working fine wit
-
How To Display All Comments for a Planning Package
Hi, I have the How-to guide mentioned in the subject and have now moved onto BI7. Is the guide still applicable in BI7 and how would I go about implementing the above How-to in IP instead of BPS? Thanks, Ale
-
Hi there. We have to tables AA (colA1, colA2) and BB (colB1, colB2). Table AA is parent to BB. BB.colB1 has a FK reference constraint to AA.colA1. The problem is that the relation is a many-to-many, so a value in BB.colB1 can actually be inserted if
-
Hi everyone, I'd like to include a jtextarea or a jeditorpane with a message in it which users could only select & copy but not edit.How do i do it?Please help.Thanks. -Bharathch