Help My site is missing after publishing changes

I created a site to replace a previously created one already on a server. I first deleted the existing one on the server. I published my new site to the desktop then used Fetch to upload it. Everything was fine, but some changes needed to be made. I fixed any problems in iweb, saved the site, then published to the same desktop folder and ftp-ed the files again only to find my site has disappeared only leaving me with a message of
The requested URL / was not found on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
I first tried reuploading the files, next I got rid of the desktop folder and republished a new one then uploaded, then I deleted what was on the server and tried again. Nothing is working and i don't know where to begin to fix this.
the site is www.stairstepstosuccess.com. I notice when I get that error is only says stairstepstosuccess.com (without the www.) and wasn't sure if that was telling to someone more informed.
any help would be greatly appreciated- I'm losing sleep over this

wow! I didn't work for hours last night- which of those steps would you suspect did the job? Or, is there just a delay sometimes?
What a relief! I hope that doesn't happen again

Similar Messages

HELP-URL will not open after publishing!

Please help me. I've read every forum discussion on this
topic and still cannot get the web site to open after I publish and
view in browser.
I've used the drop down option and chose New and DE-selected
the Continue playing option and still nothing.
At the top I am enter the On Success and Open URL or file,
then I enter the web address. I allow infinite attempts and on the
Options tab i tried selecting and deselecting the pause until user
clicks option and neither works.
Can anyone please help me?! This project was due hours ago
and this is the only glitch I could not fix.
Is it the Next button- I removed the pause until user clicks
and made it jump to next slide. :-{ I just don't know.
Cheryl

Hi Cheryl
If you were to post this to a web server and test from there,
I'd bet the URL works dandy. You are probably only seeing the issue
on your PC.
See if the link below helps you solve it.
Click
here
Cheers... Rick

Quicktime Thumbnail missing after publishing

I'm using iWeb '09 3.0.1. to build my website. I've got lots of quicktime videos. I used the Inspector to select a thumbnail for my Quicktime clips, but after publishing the clips just start in black. I've had this problem since I first built the site last year. I thought with the latest version of iWeb it would be resolved. No go. I'm having other issues like most of the videos not publishing, but I'm going to try a clean publish later tonight after I delete all the current files and folders from the host site. In the meantime, any suggestions on the thumbnails?
Thanks,
Erik

Erik:
As Roddy pointed out others have had problems with the poster frame feature in the Inspector/Quicktime pane. What's the URL of your site so we can see first hand what you're referring to.
There are alternative methods of adding a QT file to a page that might work for you. See this demo page: Opening Item in a New, Precisely Sized Window. This demo page has 8 videos on it using that method: PhotoPresenter Animated Slideshow Themes.
OT

Re Creation of Site Assets Library after Publishing site Title update

For some reason we don't need Site Assets library in publishing site so we have decided to delete that. But after Publishing site Title update Site Assets Library is getting re created . What would be the possible reason for that . Whether Publishing
feature is getting reactivated whenever title is getting updated.
Ashish Baranwal || To know what you know and what you do not know, that is true knowledge

Hi Ashish,
SharePoint Designer has the setting "Hide from Browser' to hide the List/Library from browser.
It only restrict the user to view the List/Library links from browser,but if user directly use the URL to reach that List/Library and the user can edit or add new items.
Better set the ready only permission to users and set the "Hide from Browser" to the Site Assets library through SharePoint Designer.
Follow the steps to hide the Site Assets Library through Designer:
In Site Object Section, Select Lists and Libraries
Select Site Assets Library on right side, it's navigate to List Settings
In List settings-> General Settings, Uncheck option “Display this list on quick launch”. [This is necessary], Check the “Hide from browser”.
Save the list.
Now the links are hidden from SharePoint Site in browser.
Follow the steps to Unhide the Site Assets Library through Designer:
Open SharePoint designer 2010.
Click the “All Files” folder at the bottom in left pane.
Right click your hidden list from “All Files -> Lists” folder and choose property.
Now you have your hidden list open in SharePoint Designer.
In List settings-> General Settings: Uncheck the “Hide from browser” and save.
Now the links are visible in SharePoint Site.
Indul Hassan
Microsoft Community Contributor
http://www.indulhassan.com
You Snooze.. You Lose !!

URGENT help needed:Address data missing after QA Refresh from PRD

All,
Address data for almost all user-ids are missing after QA Refresh from PRD.
In QA, after importing the User-Master although its shows successful. The detailed log shows:
   Data inconsistency in USR21. Start RSADRCK2 (See Note 459763)
   Exit program AFTER_IMP_ADDRESS3 successfully executed
   SAP user has no address SAP*
   Error while deleting ADRVP for SAP*
   SAP user has no address SAPCPIC...
   ERROR: Type "F" user exit with SYS_ERROR:     SUSR_CLIENTCOPY_USERBUF_RESET
We also do a Table export - import wherein the tables
USR03
USR07
USR09
USR20
USR21
USR30
are included.
The no. of entries exported and imported are same.
Also FYI in the User-master Transport i can see the following Tables included in the object list
USR01
USR02
USR04
USR05
USR06
USR08
USR14
USR21S
USR22
USRACL
USREXTID
USREXTIDH
Has anyone seen this before?
Any body has any ideas?

Hello Bidwan,
I think it is an issue with company address. Just check if company addresses are existing the source client ?After client copy company addreses of target client will only exist in source client. Then if you do impot of the transport containing USR* tables it will try to assign old company addresses to the users but probably they are not exisitng in target client any more.
If this is the case then you need to create those company addresses again using SUCOMP and then once again import the transport for user master.
Regards.
Ruchit.

Site pages missing after conversion

Hi: I had a site which had been built in GL1. Today I opened GL2, asked to open the site. The dialogue box appeared saying..."created in earlier version...do you want to convert", and I said yes. I had brought another GL1 site into GL2 this way with no problem. The menus created in MenuMachine
opened without a problem.
With this site however, something went very wrong. I converted and opened the site; however, the menus which were created in Menumachine could not be accessed. Per the instructions from MM, I installed MM2 manually into GL2.
However, when I reopened the converted site, it was far worse. Almost all of the site pages are simply missing. The pages which do appear are missing most (but not all) images, including background images - which makes sense as the image file for the site is missing almost all of the site images.
Any ideas what I did wrong or what could have happened? Or - more importantly - any idea if this problem can be fixed in any way?? This is an enormous worry, as the site is very large. As I said, I brought another GL1 site into GL2 with no problems at all. MM worked without an issue on that occasion.
Please let me know if you have any ideas as to how to proceed.
thx
LR

Oops! I found the solution. Apparently the newer Wiki server does not automatically create links to the created pages so these must be done manually. I think this is a new behavior since I did not have this problem with 10.5. Anyway, I'll have to manually recreate all of the links... Bummer!

Getting "Stop updating the site?" message after DWT change

Made a change to a template and as expected got a message asking if I want to update all pages with the template. Repond "yes" and get the Update Pages status window with the buttons "stop", "close" and "help". "Help" does nothing, "stop" stops the update and "close" displays the message "Stop updating the site?" (yes/no)
If I hit no DW goes back to the previous message (update pages). If yes, it appears that not all pages that use the template are updated.

Beth
Thanks. What appears to have happened was the update was taking much longer than I had ever seen in the past.
I ran it again (made a small change in the template) and waited a bit. It then displayed "done". All the pages seemed to be updated.
Not sure why it's running longer but I'll be patient in the future.
Tom

Has anyone experienced text going missing after using Change All in the Find Font dialogue box?

I manage an artwork production studio and two members of staff have separately reported that when using the Change All command to substitute fonts in InDesign's Find Font dialogue box, some text disappears from their documents. All affected text is originally set in the same font, and most of the conversion is fine but a few instances of text are actually removed (not reflowed). In the latest reported case, only four or five instances of text were 'deleted' across two pages of a 20pp document.
I've found a link that refers to the same issue but it's unresolved (http://www.listsearch.com/InDesign/Thread/index.lasso?20041#last)
I haven't been able to replicate this behaviour but would be interested to know if anyone else has experienced it and if so, under what circumstances it can occur, and what work-rounds or fixes are available.
Applies to InDesign CS3 and CS4, have not tested with CS5 because we haven't upgraded yet.

Joel, I am having the same problem you described. I have read of similar posts on PrintPlanet.com. Someone there thought it was a different text engine or something in CS4 which may be causing the problem.
I don't know what causes this but I believe it can be traced to a previously created file in CS3 is saved as a CS4 document.
The fonts associated with this problem for me are always Gill Sans, Palatino and some form of Helvetica. There may be others but these are the ones we notice the most.
Today I worked on an InDesign CS4 file. When I opened it I was given a missing font warning. I went to Find Font and it was different typefaces of Gill Sans that was missing. When I changed the missing font to Gill Sans Regular entire lines of text disappeared. I closed the document without saving it and reopened it. I did the same thing in replacing fonts. This time no text disappeared. Not reflowed; not white; not hidden—gone.
This is what I have been seeing for the past few months. The disappearing text is random and cannot be duplicated, though fonts may disappear in some other place. You never know where text will just disappear.
The workaround I have found is to export your file to an INX document and reopen it in CS3. You have to replace all missing text before saving it as INX, though. To my knowledge CS3 has never had this happen.
The workaround, though it works for me, is annoying. I'd like to know what to do to resolve this issue. What's the use in having CS4 if you can't trust it completely.
I use a Mac running 10.6.3. I also have running Suitcase Fusion 2.

OMG HELP!! CONTACTS MISSING (after prompted "wireless update")

a few months ago i was promted to do a 'wireless update', and a new 'wireless update' icon appeared on my menu. i ignored it until yesterday and decided it couldnt hurt to 'update' something...... WRONG.... after the 2 hour or so 'updating' looked like everything was pretty reset, all my icons in different locations, homescreen was default. I also noticed that NONE of my address book contacts were there. BBM contacts were, but no address book... ive searched the internet for solutions and have found none, nor have i even found any of this same issue....
If this 'update' deletes all contacts for some reason... shouldnt that be made pretty clear before allowing you to 'update'??? PoFS.... HELP PLEASE or i'll be short a 'smart' phone by the end of the week!! thanks!!
Sprint carrier
curve 8330m

Hi, and thank you for the response. I know now that i should have done a back-up... too little too late, as they say.... But i am sure now, after checking, that there are no filters set for the address book. Under my 'recent calls' list, for the calls that were made prior to the update, it still shows the names of my contacts (with numbers), and will call them from that list.. but still no address book entries, and as i checked the "number of entries" in the options menu for the address book, it states there are "0". and also still shows exceptions for the ring tones under those names..... "BRILLIANT" is all i can think of right now... so much for 'smart'phone....

Help!! Data missing after sending it in for repairs.

I sent in my Xperia Z1 for repairs because of a cracked screen. So when I got it back, all the data was missing. I suspect they did a hard factory reset causing all my data to be wiped. Add. info: I sent it to an authorized Sony dealer and I did not have a sd card so all the data was internal memory. Please help me figure a way to retrieve the data! I can't bare losing all those memories.

Strange that they did not intimate you about backing up your data. Contact Sony. Try to go for a Hard recovery option if there is still something left, I dont think you are left with any data.
Also have you given your device under the accidentall cover??
They have replaced or repaired your unit?

[HELP]i Cannot start emct after i change my hostname in linux ...

hi..
I clone my Oracle Enterprise Linux 5 in VMware,and then i change the hostname. that clone already installed Oracle database 10g release 2 enterprise edition. i can create a database, however i cant start emctl it said
+[oracle@ocp10g_mirror bin]$ ./emctl start dbconsole+
TZ set to Asia/Jakarta
OC4J Configuration issue. /u01/app/oracle/product/10.2.0/db_1/oc4j/j2ee/OC4J_DBConsole_ocp10g_mirror.drcjah.com_ocp10g_mirror not found.
thx...

Hi,
Edite the /etc/hosts and give the new hostname there and also give the new hostname in
[root@teng ~]# more /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=teng.domain.com
check the ping to hostname and hostname.domain.co is pinging.
Regards
Kaunain

Help! Titles wildly distorted after font change!

I generated titles in LiveType, imported to FCP sequence, ouput on DVD with DVDSP. The font I used was Geneva. Unfortunately, I left it at 100% white, which wasn't smart. Result was that they flickered slightly.
So, I went back to LiveType and re-did them. I did two changes: I changed the font to Impact, and I made it to 85.5% white. Impact is thicker, so there are no "thin" parts which can flicker, but Impact also makes the title more "compact" occupying less space than Geneva... so I made the titles slightly bigger (f.ex. certain titles I change from 30 in Geneva to 40 in Impact.
Anyhow, I changed nothing else other than font and size and whiteness level. Well, here's the problem: when I watch the burned DVD, the titles now are really distorted! It is as if I were seeing them reflected in a fishbowl - the end words toward the left and right edge of the screen are squished and leaning inward. Here's the thing: I did not go outside of the "margin" in LiveType and furthermore, the titles are NOT distorted at all in Geneva (nor are the titles distorted on the computer monitor, only on TV). What gives? How to correct this? They don't flicker any more, but are now funhouse mirror distorted.

How did you insert these titles into your FCP
project? Are they exported .mov's, LT project files,
etc...?
I generated .mov files from the .ipr in LT, then went into FCP and imported .mov files from LT, and put the .mov files on the timeline.
I used exactly the same workflow to generate the UNDISTORTED titles - only difference this time was changing the font to Impact and 85.5% white (from 100%). Again, the workflow was the same - .ipr -> .mov -> FCP and the result was fine with Geneva 100% white, but distorted with Impact 85.5% white.
If you used the LT file then maybe there is some sort
of corruption either in the project file itself or
with the preferences of either program.
How do the titl;es look when viewed in fcp?
Titles look fine in FCP - with both the old Geneva 100% white and the new Impact 85.5% white. Problem is how the Impact fonts look on DVD on TV. On DVD on a computer LCD screen they look fine. The Geneva look fine on DVD on TV. The Impact look fine on computer LCD screen but distorted in the TV.
How do they look if you export your FCP project as a
QT movie?
There are many places where this could be fubar'ed so
the first we have to figure where the problem is
happening.

Skin missing after published to LCMS

the progress bar that i see in captivate preview does not
appear once i publish the course. it also is being published as a
seprate swf. any addice on how to publish as one synched swf file??

Hi nerdy12 and welcome to our community
The fact you aren't seeing the progress indicator seems to
suggest you are possibly viewing the output incorrectly. To view it
incorrectly is to bypass the companion HTML page and double-click
just the .SWF. Using the companion HTML page is a good idea because
it properly sizes your Captivate movie.
To create single .SWF output in Captivate 2, click Project
> Skin... > Borders tab and DE-select the "Show borders"
check box.
Cheers... Rick

URGENT help required. BBM7 missing after OS upgrade! :(

Dear BB friends and helpers!
I urgently require your help. I have seen some similar topics posted but none exactly the same as mine so I would really really appreciate if anyone can very kindly help me out.
I have a major problem on the Blackberry Bold 9900.
A few days ago I updated my Blackberry Messanger (BBM only) to BBM7. Everything was working fine.
Then last night I got a message on my phone to upgrade my operating system to OS 7 which I installed.
Then this morning I noticed that my BBM has disappeared from my phone and I can't find it.
I currently have 7.1.0 Bundle 2061
(Also note that BB App world wont give me the option to download BBM and trying to download other apps also freezes the app world)
I have already tried
1) Hard reset / battery pull
and
2) Doing a universal search and looking for hidden icons.
I have seen a few other similar topics but I wanted to ask what I should do... :
1) Re-install BBM7 from a link from this forum? or
2) Downgrade OS7 to OS 6 via Options - Software Updates - Downgrade?
Or any other options?
The KEY thing is that I do not lose my BBM contacts! That is the end goal of whatever is recommended. I really hope someone can help.
Many thanks in advance,
Kind Regards,
Michael
Solved!
Go to Solution.

I did the ID update and did not lose a thing. If you want, do a backup to pc first.

Help -- iTunes Keeps Restoring Metadata After I Change It

I've spent a lot of time editing the metadata form my iTunes library. Specifically, I erase the composer data for all albums except classical.
However, the data keeps re-appearing for some iTunes. For example, I'll spend time erasing all composer metadata. I'll sign on in a few days, and for about 5 or six albums, the data has re-appeared. I'll erase the composer tag again or replace it with a "space", but in a few days it's bad. It's odd that this always happens with about 4 or 5 albums. And then some albums it happens randomly. On one hand, all of these albums have been downloaded from iTunes. But I've got many, many downloaded albums that don't have this problem.
I do have a subscription to iTunes Match, but I've turned it off on the computer in question.
This is driving me nuts. Any suggestions?
(ETA: Is it possible that Match is replacing the information on my iPhone and that is over-writing iTunes?)

Yes, others are seeing this. Something in purchased media (I am pretty sure this has only happened with purchased media) is periodically checking back with the iTunes Store and resetting the tags in the iTunes library file but not in the actual media files (metadata are stored in both). I haven't seen a truly systematic diagnosis of the issue (I use an old iTunes and have no iTunes account so I can't test anything myself). There are temporary workarounds but tags will still revert after a time. 2014 discussion about edited tags for Store purchases reverting to originals - https://discussions.apple.com/message/26077896 - edited tags are still present in the media file but revert to the originals in the iTunes library file. Workaround is to refresh tags so media file tags are re-read and used in library file. https://discussions.apple.com/message/26193185 Send feedback to Apple about this so they know it is an issue they need to investigate: http://www.apple.com/feedback/itunesapp.html Don't expect an immediate solution but maybe the next time they update the software it may be resolved.

Help My site is missing after publishing changes

Similar Messages

Maybe you are looking for