Help. My site published but is not saved in iWeb

I am completely flummoxed. I put together a one-page site yesterday and published it to Mobile Me fine. But when I went into iWeb today to make some changes the finished, published version of the site is not there. All I have is the original template from before I started work on it.
How come it hasn't saved into iWeb on publication?
And how do I get the finished version of the site back into iWeb so I can edit it?
Thanks
Sarah

First, download Find Any File and use it to search for "domain.sites" to see if there are more than one domain file.
If there is try the other to see if it contains your site. If there is no other domain file but the one in your Users/Home/Library/Application Support/iWeb folder, try the following:
delete the iWeb preference file, com.apple.iWeb.plist, that resides in your Home()/Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
launch iWeb and try again.
If that doesn't help continue with:
move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
launch iWeb, create a new test site, save the new domain file and close iWeb.
go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
move your original domain file from the Desktop to the iWeb folder.
launch iWeb and try again.
OT

Similar Messages

Using the "star" to bookmark a page but is not saving it to bookmarks??

I click on the star to bookmark a page but when I go to find it under Bookmarks it is not there. It does show under "recent bookmarks" in the drop down menu but is not in my permanent bookmarks??
This just started happening after I updated Firefox to 29.0.1 - it was not doing this before and worked fine.
Windows 8
Please help!

* If you click the ★ Star Icon once, the bookmark ends up in the Unsorted Bookmarks folder.
* If you double-click the ★ Star Icon, you get to pick where to place the bookmark.
* If you press Ctrl+D (Mac: Command+D), the bookmark ends up in the Bookmarks Menu folder and you get to pick where to place it.
The following add-on makes bookmarking easier in various ways. Among other things, it's able to remember the last used folder.
* https://addons.mozilla.org/firefox/addon/add-bookmark-here-2/

Where is the site publishing options located? I have iweb 09 3.04.

I was publishing to a folder, now I want to publish with FTP directly to godaddy. Watched the nifty little apple video which says to change that in the site publishing options but I don't see that in any menu.

Here's the nifty movie.
http://www.apple.com/findouthow/web/#ftp
It's at the 19 second mark. It's clearly visible.

Saved and published updated website, changes not saved in iweb. Have lost all work in iweb but correct site is on the internet. Can I retrieve site from internet and replace to iweb so can continue updating?

Just finished updating web site, saved and published. Showed up on the internet finr, went back to do a few tweeks and all my days work is gone! Fine on the net gone in iweb! I don't want to loose the days work. Is there any way to get the website from the internet and stuffit back into iweb, without redoing all the work? Why didn't it save? Wjat can I do to prevent this happening again? Where did I go wrong?

Publish you site to a folder on your hard drive and open it locally with your browser. Check to see if the site is all there. If not
Try the following:
delete the iWeb preference file, com.apple.iWeb.plist, that resides in your Home() /Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
launch iWeb and publish to the folder again.
If that doesn't help continue with:
move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
launch iWeb, create a new test site, save the new domain file and close iWeb.
go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
move your original domain file from the Desktop to the iWeb folder.
launch iWeb and try again.
OT

Top sites arrangement or websites not saved

Hello,
One of three users of my Macbook is unable to save any websites in his Top sites feature. The problem was already there with Safari 4.
I would have understood that bug if my two non-admin users were having the same issue, but it's not the case :/
That account is not blocked by a parental control.
Does anybody please have any kind of explanation, or better, any solution ?
Thanks all.

HI,
First, from the Safari Menu Bar click Safari/Empty Cache. Do that in all accounts. Then relaunch Safari.
Now go here for help with TopSites.
http://arstechnica.com/apple/guides/2009/02/safari-4-focus-top-sites-browser-in- a-nutshell.ars
Carolyn

Value help on a published CR do not show the value help as an hierarchy.

Hello experts,
we published a CR based on a Bex Query to the BW role and to BOE. The parameters on CR are based on Bex Hierchy variables. If we logon with an SAP User (with SAP_ALL) on Info View/ BI Launch Pad to execute the CR the value help shows the hierarchy correctly.
+ world
+ North Amerika
+ Western Europe
+ Asia
If we logon on to Info View / BI launch Pad with a normal SAP Enduser (without SAP_ALL) but with all needed End User Roles the value help shows a flat List....
World
North Amerika
Western Europe
Asia
We try to trace this authorization issue but we do not got any clearly results.
Maybe someone knows the needed authorization Object on BW....?
Regards Michael

Hi,
the authorizations are documented in the installation guide for the SAP Integration Kit and the authorization trace should show it as well
ingo

My Site Published but 'This Home Page is Still Under Construction'

I have followed the process to build a website which I have published. But when I try to access it is says that it is still under construction.
Help!
Chris

How long did you wait for it to go live? The site should be first put online within an hour or two of pressing Publish. Try clearing your Browser Cache for the meantime to ensure you aren't loading up stale data.
========
The first to bring me 1Gbps Fiber for $30/m wins!

HELP! Mail receives but will not send

Mail will receive but it will not send.
When I try to send I get the following pull down window.
"The sender address (sender name)@cox.net was rejected by the server smtp.west.cox.net"
Anyone have an idea why this is happening?
Thanks

I have had this problem intermittently with my ISP (SBC).
Evidently at some point they upgraded security at their server so that the server rejects email addresses that it thinks are inauthentic to prevent Spammers from using these addresses -- all of my .mac email addresses were being rejected because SBC servers thought a SPAMMER was "impersonating" my computer to get through their server. I am sorry I can't explain this better.
It took quite a few phone calls to clear it up and I also had to move up the technical support food chain. Request a MAC technician and then keep requesting that person's supervisor.
All of my .mac email addresses had to be validated on their servers.

Printer wont print. have new ink. trouble help say it ok but its not ok

I HAVE A HPPHOTO SMART C5180 ALL IN ONE PRINTER. IT JUST STOP PRINTING SO I CHECK THE INK REPLACE IT WITH NEW INK AN NOW IT JUST WONT PRINT I TROUBLE SHOOT IT AN IT SAY ITS OK BUT IT STILL DONT PRINT . I ALLSO REPLACE IT WITH NEW PAPER AN IT STILL DONT WORK

If resetting the que fails try deleting the printer and reinstalling (delete and allow your mac to find it again). This has worked for me in the past when I had trouble with the que.
If that fails you can search the HP website for a OS-X compatible driver for this printer model and try using that instead of the pre-installed driver selected by OS-X.
Good luck. Let us know how it turns out.

Capture stops when physical camcorder tape ends; but buffer not saved

I'm trying to capture a ~50 minute HDV video from my Sony HC3 camcorder. The capture screen indicates the video displayed on the screen is behind the camcorder and that you should view the camcorder to monitor the video. I assume that means it is pulling if off of the camcorder faster than it can write it to the harddrive, thus it has to buffer it in memory.
The problem is, it seems like when the physical end of the tape is reached, any video this is still buffered is lost. I've tried it twice and both times approximately the same amount of video makes it to the harddrive. Everything buffered after that is lost. The second time I even tried it with the "abort capture on dropped frames" option turned off.
I know I only have a little eMac, but I have 1gig of memory and plenty of harddrive space left (at least 50 gig) on my internal drive.
Any suggestions?
thanks,

What happens if you stop the tape just before the end rather than letting it run out by itself?
Al

Publishing a website not designed in iWeb

I have a small site that I designed in GoLive. I want to upload it to .mac account and without using any of the templates offered there. Is this possible to do? How can it be done? Thanks

You question is probably best asked in one of the .mac forums, but I can give you a brief answer here. I don't know anything about GoLive or how it "publishes." But you can copy/save html files to the Sites folder of you iDisk. They will then have a homepage url. For example:
http://homepage.mac.com/hoovmoss/iWebIsGrey.html
This is a web page I created in a word processor and saved to the Sites folder of my iDisk.
kabing

Captivate 5.5 published files are not visible in Fire Fox or open in new window.

When I publish and post Captivate 5.5, the HTML or the swf files do not display in Fire Fox (latest version) without forcing the file to open in a new window (if it displays at all). If it does work, the Flash security blocks the swf on an ugly view until the user clicks.
I thought it was because I have to assign a direct URL to each component, but all of the other Captivate sites I have reviewed have the same issue when viewing in Fire Fox.
IE will display after the active x is authorized (I can live with that).
You Tube and other Flash display properly in Fire Fox, just not Captivate products.
I have disabled off all plugins, modified the protected settings, and everything I could find listed in the Fire Fox help. I have installed a previous version of Flash and Shockwave Player. Short of reinstalling windows, it is not working and that will not help because the published content is not visible on any other machine in the office or at home.
The files are in a Portal, so I cannot share them unless you are in the DoD and have an AKO or DKO account.
However, here is another example of the Captivate not working.
https://clc.dau.mil/games (this displays on some computers, but not all)
http://www.hartisd.net/pages/uploaded_files/Assignment_Search.mht (After allowing the mht, this displays in IE)
I am not sure if it has something to do with the other 2 published xml files that are not directly referenced in the html, but I just need either the swf or html to display in the iframe without forcing another window to display and without a lot of dependecy issues with other add-ons in Fire Fox.
- Thanks!

Any of the DAU games, if they display. It is a government site, so they have the standard gov garbage (stuff not working like certificates), but nothing is harmful nor can they do anything to track other than the current session.
It is kind of weird how the content is displayed... It is not an intranet, it goes to a limited access portal. When I store content, it uses an absolute path instead of relative path. Very aggrevating when using many of the tools for non-programmers (like me), and probably more aggrevating for programmers.
Whether I point directly to the .swf or to the generated HTML, the content displays in IE, but not in FF.
It may be a combination of FF and Captivate. FF seems rather flaky in dealing with swf files. There is the consideration for add-ons, but I tried on a newly imaged computer and it still was not working. Even after going through all of the FF steps to get it to work.
Basically we had to create a new HTML file to display the content because the Captivate published files don't work. However, the new HTML does not reference the XML files.
When I publish, I get 5 different files, .swf, .htm, .js, and 2 .xml. When I dig through the code (once again, not a programmer, soo I may be missing something), even round tripping to Flash, I do not see how the .xml files are referenced at all.
These may be different topics, not sure, it came up because I am trying to get a simple solution from the product that can be easily transferred to our production servers and available for Solders to access.
- Thanks
Michael

Bridge not saving settings.

I am using Bridge with CS4 and have the following minor but irritating problem.
Bridge does not save the current settings such as last folder used or screen view settings when the computer system is shut down.
These setting are saved during periods of opening and closing bridge while the computer remains powered up but are not saved (presumably to the registry) when the computer is powered down.
I am using Windows XP / service pack 3
I presume that there is an entry in the system registry that needs editing. I would appreciate if anyone with knowledge of a solution for this problem would assist me.
TIA
Roy Berger

Thank you for the information, it is most helpful.
Of course you are correct about me having bridge set to "autoload on
startup". It will look into closing Bridge before shutting down.
Appreciate the prompt reply,
Regards, Roy Berger
http://www.pbase.com/parrothouse

I have PSE7, but is not working with NIKON D90

I already checked if model D90 is supported. The images transfer, but are not saved in PSE7,help ?

Download and install Adobe Camera Raw 5.4

Tax classification data is not saving in QAT

Hello Gurus,
I have a issue with tax classification data in Quality.
When i give tax classification data in developement server its saving the data , i transported the same request to quality here it is not saving the tax classification.
Note -In master data tax classification data is saving in delopement but its not saving master data tax classification data in quality.
looking for inputs.
Thank you all inadvance
Regards
venkat

Hi JP,
The relevant condition type are maintained in OVK1, OVK3, OVK4
the problem is still same,
Looking for some more inputs .
thanks&regards
venkat
Edited by: K.Venkata Chalapathi on Jul 31, 2010 3:16 PM

Help. My site published but is not saved in iWeb

Similar Messages

Maybe you are looking for