HELP MY SOUND IS GONE

i tried to use premire pro now that my computer is back from the shop but now i cant here sound please help i can hear sound on eveything else so i dont know whats up

More information needed for someone to help... please click below and provide the requested information
-Information FAQ http://forums.adobe.com/message/4200840

Similar Messages

HELP - My sound is gone, both audibly and in Prefs

My sound has crapped out on me. I thought maybe my speakers had just gotten unpluged but it's everything. In the Sound section of Prefs. It no longer shows the digital and analog options... it doesn't show anything in the box at all.
Is my sound board dead? I didn't know Macs even had sound cards at least stand-alone units. Any help would be greatly appreciated.
-WW

Hi
From what did You import Your movie ?
• miniDV tape Camera - FireWire
• .avi, .wmv, .mpeg4, etc
My general list on this - May be not Your problem at all ?
*No Audio in iMovie*
Most common origin is use of audio from iTunes.
Work around -
• Select needed audio to one new playlist
• Copy out this as an Audio-CD .aiff (not .mp3)
• Use this in the movieproject
Other origins are
1. strange/ailient file formats as -
• .mp3, .avi, .wmv etc
• Convert them into .aiff 48kHz 16-bit and use this
2. the Mac is set wrongly in regard of midi -
• Close iMovie and other programs
• Start GarageBand
• Make a new GB-project and play some notes
• Close GB and Save
• Now try iMovie again
3. No audio when playback in iMovie 1 to HD 6.
a. in iMovie pref - deselect ”Playback via Camera”
b. in System preferences - see that Audio out is not set to zero. Mine often does this
without me knowing why.
Stuttering audio and video
1. FileVault is ON - Turn it off
2. More than 50 audio files in a movie-project
Mix down to one audio clip
3. Project is stored on one (USB) external hard disk - should be a FireWire one
4. the External hard disk is not Mac OS Extended formatted - but
UNIX/DOS/FAT32/Mac OS Exchange and this will not work for Video.
5. To little free space on internal boot hard disk.
I go for a minimum of 25Gb free space when project is imported and edited and this goes for
4x3 SD Video. For 16x9 HD my guess would be about 5 times more at least.
Neither Mac OS, iMovie or iDVD can address any other hard disk than the boot drive for it’s
scratch files. (Unlike Final Cut Express/Pro where You select scratch disk/s)
6. Network storage - DOESN’T WORK
Yours Bengt W

I've installed the latest ios 6 however, the sound has gone from all programs , music , youtube any help iPhone 4, iOS 6

I've installed the latest ios 6 however, the sound has gone from all programs , music , youtube any help
iPhone 4, iOS 6
The ringtones are working but all other sounds are not working please help

I had this problem on my iPod Touch 4g. Just press the home and sleep button. Wait and it will give an iTunes and cable logo. Now you can put in DFU mode (Hold Sleep and Home button 10 seconds and then release the power button kand keep pressing on the home button.) Now you will be able to restore it in iTunes.
If you didn't sell it in al this time

Help, please. My iMac sound has gone all stat·ick·y The Video won't play correctly or at all. I have a Model Name:     iMac   Model Identifier:     iMac12,1   Processor Name:     Intel Core i5   Processor Speed:     2.7 GHz I am running OSX 10.6.8

Help, please. My iMac sound has gone all stat·ick·y The Video won't play correctly or at all. I have a Model Name:
iMac   Model Identifier:
iMac12,1   Processor Name:
Intel Core i5   Processor Speed:
2.7 GHz I am running OSX 10.6.8

So just to be clear on a few things:
Should partitioning the hard drive not work is it undoable?
Will this have any impact on doing a complete erase and reinstall and will that restore it back from the process?
Is there a limited amount of space that makes this process ineffective?
I have never had to do this sort of thing so I just want to be sure I don;t wind up in the dog house *)
Thanks again

My sound has gone out and please don't tell me about PRAM because my MacBook keeps going to the login screen and I can't hear any start up beeps neither someone PLEASE help me

my sound has gone out and please don't tell me about PRAM because my MacBook keeps going to the login screen and I can't hear any start up beeps neither someone PLEASE help me

bcoady90 wrote:
My guess is a loose connection.
I suspect you are correct. I would suggest you bring it to a repair facility that may have better diagnostic tools, preferably an Apple store genius bar.
Ciao.

HT4623 I've installed the latest ios 6 however, the sound has gone from all programs , music , youtube any help

I've installed the latest ios 6 however, the sound has gone from all programs , music , youtube any help

Until you have tried Maps, Music, etc. first hand, I wouldn't formulate negative opinions about them. And updates, if performed correctly, do not erase data.
I presume that last time you updated through iTunes. This time, update over Wi-Fi by going to Settings > General > Software Update.

My start up sound is gone after I got the Maverick for my MacBook Pro. Is that supposed to happen?

I just uploaded Maverick onto my MacBook Pro and now the start up sound is gone. Is that supposed to happen?

Hmm.....I tryed that and there isn't anything that pertains to the start up sound. I guess I have to keep searching. Thanx for the help though.

Help Getting Sound Card To W

I just installed my sound card and installed the driver. And the sound was working for a few minutes, but now that I restard my computer the sound does not work anymore. I have tried disabling the motherboard sound from the BIOS. I have made sure that it is not muted and the speakers are powered and plugged in. I can't figure out why it isn't working.
Help would be great. Thanks.

is the sound totally gone, or if you really crank up your stereo and the voluem sliders in windows, can you hear it a little bit's

Installed Lion now sound is gone

the sound is gone installed mountain lion last night help?

If you haven't already, I would open your Applications folder>System Preferences>Sound>click on the "Output" tab in the center>click on "Internal Speakers"> at the bottom of the window, slide the "Volume" slider all the way to the Right>and make sure that the "Mute" box is NOT checked.

Sound is gone for iTune videos that convert to iPod

I have a problem. I load movies into iTunes, and they work. But as soon as I convert them for iPod, the sound is gone. It's not just one file, its all of them. Something must be wrong with iTunes cause I know more than that should work.

Parkram412,
You can always contact tech support: http://www.apple.com/support/contact/
Do any videos play correctly in iTunes? If there is a problem with iTunes playing all videos this article: http://docs.info.apple.com/article.html?artnum=303706 may help
Videos that did not come from the iTunes store are going to be harder to troubleshoot because there are many ways the video's could have been created. Another article that has good information on video conversion for the iPod is: http://docs.info.apple.com/article.html?artnum=302892
Jason

I updated my Mc to to the new operating software and the sound is gone and I can't get it back

I have upgraded to OS X Yosemite and now the Sound in gone and I can't get it back, The volume symbol is also grayed out.

Sound – can’t hear sound from speaker - Yosemite
Sound – No Sound After Upgrade (2)
Sound Levels - Troubleshoot
Sound – Troubleshooting Internal Speakers

Sounds 4s gone with 7.0.3

My iphone 4s after last update 7.0.3 sound only works for calls, all other phone sounds are gone, I can only listen with headphones or connected to a speaker, do not know what else to do.

I'm with Vodafone Germany too. But as the problem occurs with WiFi too it can't be carrier issue I guess.

Hi can you help the sound is not working on my Mac I have went into settings and there are no option for interal speaker help

Hi can you help the sound is not working on my Mac I have went into settings and there are no option for interal speaker help

Read the documentation at the links. They won't hurt your data.
Basically smc reset is shutdown, pull your plug for 15 seconds, plug it back in, wait 5 seconds, and reboot. Harmless to you. Resets the smc.
Pram reset is similar but you need to push commnd-option-P-R after the boot chime. Read what does.
smc and pram reset

Need help with Sound Methods

Hi, I am new to java and need help with sound methods.
q: create a new method that will halve the volume of the positive values and double the volume of the negative values.
Message was edited by:
Apaula30

duplicate message #2

Sound is gone

The macbook just came back from the repair shop...the guy in the shop phoned me before hand to inform me that the sound was gone and I had to put the install disc back in and it would sort it...It hasn't...
Anyone got any ideas...

take it back to the repair shop

HELP MY SOUND IS GONE

Similar Messages

Maybe you are looking for