Help!! My trackball does not click (select) thing when i press it

My trackball scrolls fine but when i press it i cannot select things or press enter. What should i do, replace the trackball, sensor or the dome ?

I would suggest trying a full backup of the BlackBerry then try to do a clean reload of the device software. Below is an article that will walk you through a step by step of this.
How to perform a clean reload of the BlackBerry Device Software using BlackBerry Desktop Manager for Windows - KB11320
http://www.blackberry.com/btsc/KB11320
If this does not work I would suggest talking to your service provider about options.
Hope this helps.

Similar Messages

  • Centre Cursor/Trackball does not open any folder when pressed

    I have a Blackberry Curve. I think it's a 8520 but can't find out the actual model number as the centre cursor/trackball will not let me enter any folder when pressed.  It will navigate but does not work or "enter" when pressed to open a file e.g. Cannot open text messages, Cannot mange connections, Cannot access Setup etc. etc. etc  Tried re-booting several times.  Phone goes through the usual set-up and verification as OK.  Screen sticks on "confirm current date & time" as the centre cursor will not allow me to OK or edit.

    The device has a physical keyboard? If so, you can navigate to the menu item with the trackpad and then hit the "enter" key on the bottom right of the keyboard. It looks like an arrow going down and to the left.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • Location bar does not go to address when I press enter

    I've just upgraded to Firefox 4.0.1. When i click on an address or type in an address in the location bar and press ENTER on my keyboard, it doesn't take me to the address, the tab stays blank like i've not done anything. I have to click on the little arrow key at the right hand side of the location bar for it to go anywhere!
    How do i fix this? I've been in to the Tools>Options menu and checked the box that says "When i open a link in a new tab, switch to it immediately" but this hasnt done anything.
    Thank you

    AVG Safe Search has been known to cause that problem. Disable it (Add-ons, click on it, click "Disable") and restart Firefox, then test.
    Check with AVG for an update.
    <br />
    <br />
    '''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
    *Shockwave Flash 10.1 r102
    *Next Generation Java Plug-in 1.6.0_23 for Mozilla browsers
    #'''''Check your plugin versions''''' on either of the following links':
    #*http://www.mozilla.com/en-US/plugincheck/
    #*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    #*'''Note: plugin check page does not have information on all plugin versions'''
    #*There are plugin specific testing links available from this page:
    #**http://kb.mozillazine.org/Testing_plugins
    #'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
    #*Download and SAVE to your Desktop so you can find the installer later
    #*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
    #*After download is complete, exit Firefox
    #*Click on the installer you just downloaded and install
    #**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
    #*Start Firefox and check your version again or test the installation by going back to the download link below
    #*'''Download and information''': http://www.adobe.com/software/flash/about/
    #**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
    #**Use IE to go to the above site to update the IE ActiveX
    #*'''Download Manual installers'''.
    #**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
    #**Note separate links for:
    #***Plugin for Firefox and most other browsers
    #***ActiveX for IE
    #'''Update the [[Java]] plugin''' to the latest version.
    #*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
    #**'''''Be sure to <u>un-check the Yahoo Toolbar</u> option during the install if you do not want it installed.
    #*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
    #* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
    #* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Firefox_:_FAQs_:_Install_Java#Multiple_Java_Console_extensions
    #*Java Test: http://www.java.com/en/download/help/testvm.xml

  • Contextual help in Firefox does not take the focus when called again

    When I call the context help in Firefox once, then I return
    in the application without closing the help window, and I call the
    context help again, the Firefox window stays behind the application
    window and is not visible. What could I do?

    See: [http://kb.mozillazine.org/Menu_differences Tools > Options] > Advanced > General : Accessibility : [ ] "Warn me when web sites try to redirect or reload the page"
    * [[Options window - Advanced panel#General_tab]]
    See also: http://kb.mozillazine.org/accessibility.blockautorefresh

  • TS3274 red slider does not appear on ipad when i press and hold

    how do i get my ipad out of recovery mode

    You must restore your iPad once it is in Recovery Mode.
    Backup & Restore
    Recovery Mode Restore
    Restore iOS

  • Document does not contain selectable items.

    Hello Gurus,
    My purchase team wanted to transfer plant from one plant to other.. and so they are creating STO , without any confirmation , while doing GRN 101 movement type Store person is facing error Document does not contain selectable items.
    Please help to resolve the same.

    Hi,
    1) this should be posted in MM forum, not here
    2) let the person go to MIGO , to menu Settings, click Default Values and check checkbox "Propose All Items"
    3) I guess if it is STO it would need goods issue first happening in source plant so that GR can happen in receiving plant (so first create Outbound Delivery in source plant, post goods issue against it and then do the GR with 101 against this delivery or PO itself)
    Regards,
    Tomek

  • HT201317 My photostream in windows 7 PC does not shows any pic. when i click on slide show it start showing me slide shows of pic but when i try to copy files i cant do as no photo is viewd in list mode. This problem has arised since IOS is updated.

    My photostream in windows 7 PC does not shows any pic. when i click on slide show it start showing me slide shows of pic but when i try to copy files i cant do as no photo is viewd in list mode. This problem has arised since IOS is updated.I reinstalled my icloud and checked if icloud sharing is ON. I can see pic in my photo stream in PC only in slide show mode. While in list mode it shows pics before i actually click on photostream folder. My phone memory is out becose of bunch of photoes. How do i copy my photostream photoes.

    Hi all.  I can’t tell you how to solve your iCloud 3.x issues.  Heck, I don’t think they’re even solvable.
    But if you had a previous version of iCloud that was working correctly then I can definitely tell you how to solve the “iCloud Photo Stream is not syncing correctly to my Windows 7 PC” problem.  …without even a re-boot.
    Log out of iCloud 3.0 and uninstall it.
    Open My Computer and then open your C:\ drive.  Go to Tools/Folder Options and click on the View tab.  Select the “Show hidden…” radio button and click on OK.
    Open the Users folder.
    Open your user folder
    Open ProgramData (previously hidden folder)
    Open the Apple folder – not the Apple Computer folder.
    Open the Installer Cache folder
    In Details view sort on Name
    Open the folder for the newest entry for iCloud Control Panel 2.x – probably 2.1.2.8 dated 4/25/2013
    Right click on iCloud64.msi and select Install.
    When finished, the synching between iCloud and your PC will be back to working perfectly as before the 3.0 fiasco.  The pictures will be synched to the same Photostream folder as before the “upgrade”.  Now all you need to do is wait until Apple/Microsoft get this thing fixed and working before you try the 3.x upgrade again.
    I think the iCloud 3.0 software was written by the same folks who wrote healthcare.gov with the main difference being that healthcare.gov might eventually be made to work.
    For those of you who hate to go backwards, think of it as attacking to the rear.  Which would you rather have, the frustration of no synching or everything working on an older version?
    Good luck…

  • My iphone does not always turn on when i click the home button or start button? Happened after ios7.5 update. Any suggestions? Phone is brand new

    my iphone does not always turn on when i click the home button or start button? takes a few clicks and then it goes on.  Happened after ios7.5 update. Any suggestions? Phone is brand new

    Ok i did what you said to and it did it again, I am at work. Phone is on my desk. I clicked the home button to see if I had missed any messages and it would not turn on.
    Starnge thing is this happened to my other 5S. Took it to apple. They replaced it, Now this phone is doing the same thing, Could it be the software?
    Do you have another suggestion for me?
    Your help is appreciated .

  • GRC AC 10- ARA Risk violation does not show any thing

    Hi Expert,
    GRC AC 10.0 SP14
    Steps to reproduce error
    Reports and Analytic -> Risk violations. The dialog opens up but does not show any thing. Please see the attachment for your information
    We have installed Abode flash player already.
    Any suggestion will be of great help.
    Thanks,
    Kailsh

    Hi Kailash,
    Does this issue occur with other dashboard reports too or only with risk violations?
    Also, can you check if the batch risk analysis has been successfully completed?
    Thanks
    Sammukh

  • Keyboard does not click

    My keyboard does not click as I type. I also noted that FaceTime does not ring when connecting. I do use a BlueTooth speaker when I listen to my iPad, which works fine. I have my iPad 2 upgraded to the latest iOS system. The speakers work fine when I listen to on line radio and television programs.  I checked Settings, and it shows that both keyboard click and FaceTime ring are on. Thank you for any help.

    This did solve my problems. I did get feedback about the FaceTime issue, that the Settings, General, Use side switch was on mute, which may have also been a problem. As I checked the device before solving, I noticed that none of my apps had sound. I found that resetting, though, forced me to enter pass codes. An inconvenience, but at least I have everything back to normal, thanks to you and the discussion folks. Thank you.

  • Screen Saver does not use selected Screen Saver when activated

    Screen Saver does not use selected Screen Saver when activated. After "Start screen saver" elapse time has been reached, a blank black full screen is displayed. I can activate the selected screen saver by using the hot corners function. Any help with this matter will be greatfully received.

    Hi again sassey,
    You're assuming correctly. Simply change the settings so that your screen saver activates before the sleep settings.
    Hope this solves your problem...

  • Routing does not match selection ID 01

    Hi all,
    I have query while run the costing (CK11N) for Assembly Material. Error displays  as "Material X: Routing does not match selection ID 01".
    This Assembly Material has Routing with 2 Direct and 5 In-direct opeartions as well as defined the Labor for Direct Operations with respect to the CC assigned in WC.
    Can anyone help me out why this error occurs?
    Regards,
    Sundhu

    Dear Sundareswari,
    Goto OKKN->select the Costing variant that you have used in CK11N and under control tab goto quantity structure control
    >check the value or ID assigned for routing selection.
    As per this your routing gets selected in CK11N or CK40N.
    Check and revert
    Regards
    S Mangalraj

  • HT4623 i updated my ipad with ios7 but the keyboard does not work as it should hit the letters it is slow and does not click as it should

    updated my ipad with ios7 but the keyboard does not work its slow when i hit the letters does not click did not do this until i updated anyone can help me on this to fix it

    Settings>General>Reset>Reset All Settings

  • My touchpad does not click ,what should I do?

    My touchpad does not click ，what should I do?

    Does the hard click work?
    If so, System Preferences > Trackpad > Point & Click, enable Tap to click.
    Reset SMC.
    http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    The suggestion in this article  may help.
    http://support.apple.com/kb/TS1248
    If these steps do not help,take the computer to the Apple store to check the battery and  trackpad out.
    Best.

  • Software Component does not support selected Development Component Type...

    Hi,
    I have a problem, i want create a new project of Mobile Service Component, but, when i want select MyComponents [demo.sap.com], in the top appear:
    "Software Component does not support selected Development Component Type. Required DCs are located in an SC that is not visible from the selected SC "
    Why?
    Thanks in advance,
    Regards,

    Hi Victor,
    the issue is that the archive pool in your NWDS is not set up properly. Could you check the configuration of the development configuration? I guess you are developing in Local Development, right? Please check in the "Component Browser" that the two Software Components "NWMCLIENT" and "XOCA" are present and contain some DCs inside them. If this is not true, than something went wrong with your setup of the IDE. The modifications of the default.confdef are most likely not right.
    Please come back to me if you don´t know how to proceed.
    Regards,
    Stefan

Maybe you are looking for