Help!!my x86 Solaris7 get error in booting step,How can I repair it?

My compute is COMPAQ ARMADA M300(Notebook),There have two OS installed on it:
x86 Solaris7 and Win2000 Prefessional��and they can be selected to boot through
an LILO program of x86 Solaris.I have work normally with this configure allmost one year.
Now,I got the error:
from the LILO,when I selected Win2000,the win2000 boot and run okay;But when I selected
x86 solaris,the beginning steps all were okay,but I got error when the booting step got in
kernel booting, the screen output like below
SunOS Release 5.7 Version Generic[UNIX(R) System V Release 4.0]
Copyright(c) 1983-1998,Sun Microsystems, Inc.
/pci@0,0/pci-ide@7,1/ide@0/cmdk@0,0:a: bogus sector number
short read,0x2000 chars read
/pci@0,0/pci-ide@7,1/ide@0/cmdk@0,0:a: bogus sector number
short read,0x2000 chars read
(Can't load KD)
Type any key to continue_
when I pressed the Enter key, the screen output like below,and locked the key and all other input.
rebooting...
BAD TRAP
Page Fault
Bad Kernel fault at addr=0x5ea43eeb
pid=0,pc=0xfe8bf1fe,sp=0xe09ee000,eflags=0x10082,
eip(fe8bf1fe),eflags(10082),ebp(fec0d510),uesp(e09ee000),esp(fec0d414),
eax(80),ebx(27b8),ecx(1b),edx(5ea43ee0),esi(e046d000),
edi(fec0d538),cr0(80050011),cr2(5ea43eeb),cr3(141000),cs(158)
ds(160) ss(d000) es(160) fs(1a8) gs(1b0)
panic:Page Fault on cpu 0.
I tried several times with switch off power and reboot,but each time I got the same result.
Please, Mail me and Help me to repair it!!!!!!!!

MrMars wrote:
Out of the blue one day I opened itunes and a pop up appeared that an itunes folder had become damaged.
An iTunes folder or the iTunes library.itl file is damaged?
How do I repair the damaged folder?
You don’t.
If iTunes is running the iTunes library.itl file was rebuilt.
You can quit iTunes and restore the iTunes library.itl file from your most recent backup.
You do regularly backup you computer, correct?
If not, File > Add to library and select /My Music/iTunes/iTunes media/Apps/ folder.

Similar Messages

HT201413 I need help please!!!!! My iPhone 4 s won't charge!!!!! I get error message 21. How can I get around this.

I need help please I keep getting error messega 21 when i try uploading my iPhone 4 s!!!!!!!!! omg some one please tell me if and how to fix this please. thank you!!!

Hopefully this link will help you: http://support.apple.com/kb/HT2109

Windows 7 itunes error msvcr80.dll missing - how can I repair or fix to open itunes

I have uninstalled and installed itunes a number of times and I continue to get the same error message - making it impossible to open itunes on my Windows 7 pc. I have run out of my bag of tricks. How can I once again get itunes to run and work to access songs and connect my apple devices?

This also 100% work
Removing and reinstalling iTunes and other software components
If applicable, disconnect any iPod or iOS device and close Microsoft Outlook.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later).
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (see note 1 below)
iCloud (if present)
MobileMe (if present) (see note 2 below)
Bonjour
Apple Application Support
Reboot your computer. Delete any of the following folders where they can be found: (see note 3 below)
C:\Program Files\Bonjour
C:\Program Files\Common Files\Apple
C:\Program Files\iPod
C:\Program Files\iTunes
also on 64-bit systems:
C:\Program Files (x86)\Bonjour
C:\Program Files (x86)\Common Files\Apple
C:\Program Files (x86)\iPod
C:\Program Files (x86)\iTunes
Download the iTunes setup file and run it to install. Use an account with administrative rights. This can usually be achieved by right-clicking on the downloaded file and selecting Run as... or Run as Administrator. In some cases a combination of Shift or Ctrl keys may be required for the option to show, or it may not be necessary.
If you deleted iCloud and reinstalling iTunes doesn't automatically reinstall it visit iCloud Control Panel.

HT4623 I keep getting error code 3194. How can I fix it?

I started my update to iOS 6 wirelessly. All went well until I plugged my device (an iPhone 4) into my PC and opened iTunes. It prompted me to restore, and I accepted and was subsequently met with error code 3194 and a message saying that my iPhone couldn't be restored. I'd appreciate any help and insight that can be provided. Thanks!

Sound like you're using Windows, am I correct?
If so, sounds like a host file complication.
Do a Google search, lots of solutions.

Keep getting error not vaild pdf how can i open the file

Error msg says not a valid PDFhow can iI open

Hi,
Would it be possible for you to share the problematic pdf with us at [email protected] so that we may investigate?
Thanks,
Adobe Reader Team

I'm downloading trial Indesign and I get error 49, patch failed, how can I fix this?

I'm not the savviest of users I'm afraid!

Lindsayb61684269 for information on how to resolve Error 49 please see Error downloading and installing Creative Cloud application. If you have an active membership you are welcome to contact our support team directly for assistance at Contact Customer Care.

Help me! I get error after install window on bootcamp

I use bootcamp to create usb window 7
But I cannot install window on bootcamp drive
After that, I restart but I get error cannot boot on black screen, help me

You need to select the BOOTCAMP Partition and click on Format. After the Installer formats it from FAT to NTFS, you should be able to install Windows.
These screens from a Mac, which does not have Recovery HD, so the numbering is different.
Reference - https://help.apple.com/bootcamp/mac/5.0/help/#/bcmp173b3bf2

After getting the dreaded gray/blue screen, I tried to run disk repair on the internal disk. I got an error message saying "Disk Utility can't repair this disk and restore your backed-up files. The volume Macintosh HD could not be verified completely

After getting the dreaded gray/blue screen, I tried to run disk repair on the internal disk. I got an error message saying "Disk Utility can't repair this disk and restore your backed-up files. The volume Macintosh HD could not be verified completely." What do I do now? This is an iMac and I'm running 10.6.8.

Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it. See below for how to clone a drive.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
You may be able to backup your data if you have an erased external drive you can use. Before you do the above but after you have opened Disk Utility you can try to clone your drive:
Clone using Restore Option of Disk Utility
1. Open Disk Utility.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag
       it to the Destination entry field.
5. Select the source volume from the left side list and drag it to
      the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
Now this will only work if the drive is accessible and can be cloned by Disk Utility. Otherwise, you would need to access your drive from another Mac that you can connect via Firewire - Target Disk Mode.

On signing in, get error message 400. How do I fix this?

Problem signing in to Photoshop Elements 9. Get error message 400. Also can't create new user ID. Help!

There is no longer anything to sign in to.
See this for the reason and solution:
http://barbarabrundage.com/2013/09/16/pse-8-9-10-cant-sign-in-error-404/

Purchased and downloaded elements one yr. ago. Now new computer. Have CD, tried to install, after entering S/N get error-"not valid number" What can I do?

Purchased and downloaded elements one yr. ago. Now new computer. Have CD, tried to install, after entering S/N get error-"not valid number" What can I do?

Go here (You may need to use the chat option.):
Activation & Deactivation Help
This is the Photoshop Forum.
Note to mod: Please move to the Photoshop Elements forum.

Adobe application manager getting error code : A12E6 please what can i do ?

adobe application manager getting error code : A12E6 please what can i do ?

Anass63113494 what Adobe software or service are you attempting to install? Also which operating system are you using?

Have not used Itunes in a while and I cant access Itunes Store with out downloaded new version but I keep getting error message with download. Can I just access the Istore without downloading new version?

Have not used Itunes in a while and I cant access Itunes Store with out downloaded new version but I keep getting error message with download. Can I just access the Istore without downloading new version?

downloaded new version but I keep getting error message with download.
What does the error message say, andrea? (Precise text, please.)

I purchased the TV FRIENDS in HD on iTunes (the iTunes store stated with every HD purchase you get the SD version as well) and want to download on my I Pod Classic and get error message the I POD can play this video. How do I download?

I purchased the TV FRIENDS in HD on iTunes (the iTunes store stated with every HD purchase you get the SD version as well) and want to download on my I Pod Classic and get error message the I POD can not play this video. How do I download?

I see there's no answer.
This issue has ****** me off for a long time, and I am fed the **** up with it.
I DO NOT WANT TO DOWNLOAD the Movies and TV shows to every *^&%^$%# Apple device, ONLY the MUSIC!!!
COme on Apple!!! FIx this!!!

TS3694 My iPad says it has to restore to update, but it will not. It is caught in a cycle of not being able to restore but needed to restore. I keep getting error code 3014 but I can not figure out what this means!

My iPad says it has to restore to update, but it will not. It is caught in a cycle of not being able to restore but needed to restore. I keep getting error code 3014 but I can not figure out what this means! nor can I do anything about it! So Frutrated!

Also...
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
But... if the Device has been Modified... this will Not necessarily work.

When I am connecting my Iphone to Itunes I get error code 0xE8000003? How do I fix it

How can I fix this!!??

When I am connecting my Iphone to Itunes I get error code 0xE8000003? How do I fix it
Try here > https://discussions.apple.com/thread/2661257?start=0&tstart=0
And here > iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting
FYI;
This is the Apple Support Communities > iPod > iPod classic > Discussions forum.
In the future if you have questions regarding your iPhone please post in the iPhone forum here.

Help!!my x86 Solaris7 get error in booting step,How can I repair it?

Similar Messages

Maybe you are looking for