Help my zen neeon 5gb doesn`t turn on the right

I need help because my Zen Neeon 5GB doesn't turn on the right way. I was listening to music the day before yesterday and yesterday, when I tried to turn it on it only appears on the screen: CREATIVE and the menu doesn't appear on the screen and I can't listen to music and it doesn't turn off until I reset it. But you can listen to the hard disk running. I can use it like an USB device but I can't listen to music. What happen is't death
Message Edited by sorenazael on -02-20072:3 PM

Have you tried anything in the recovery mode on the player. If not i would go to creative knowledge base and lookup "recoverymode." I would try the clean-up and format first.

Similar Messages

  • My Zen Neeon 5gb doesn't turn on correctly, only appears CREATIVE on the scr

    I need help because my Zen Neeon 5GB doesn`t turn on the right way. I was listening to music the one day before?and when I tried to turn it on it only appears on the screen: CREATIVE and the menu doesn`t appear on the screen and I can`t listen to music and it doesn`t turn off until I reset it. But you can listen to the hard disk running. I can use it like an USB device but I can`t listen to music. i tried with the upgrade from firmware but appears:
    Device detection failed! Please power off it to generate system file.
    Device upgrade failed!What happen is`t death?

    Have you tried anything in the recovery mode on the player. If not i would go to creative knowledge base and lookup "recoverymode." I would try the clean-up and format first.

  • My zen neeon 5gb always needs to be formatted everytime i connect

    i have a zen neeon 5Gb with no travel charger ( not bundled)
    so i usually charge it with my pc's usb, but my neeon always like corrupted everytime i need to re-charge
    the "corrupted" status is like i can't access it from windows explorer, and my windows hangs everytime i connect my neeon
    so what i did is always put the neeon into recovery mode and format the firmware again,then the problem's solved
    but i always need to did this almost everytime i connected it to my pc, which makes i need to copy all my mp3s again
    and again everytime i want to charge it...
    this is very tiring..helps please...

    Welcome to the Apple Community.
    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

  • IPhone is plugged in to my laptop and is charging but will not sync. The phone logo doesn't appear in the right hand corner.  i have updated itunes restarted both phone and laptop, changed connectors and still nothing. help?

    IPhone is plugged in to my laptop and is charging but will not sync. The phone logo doesn't appear in the right hand corner.  i have updated itunes restarted both phone and laptop, changed connectors and still nothing. help?

    Same thing happened to me, nothing is working. I've updated everything, restarted everything, nothing seems to work.

  • When i type my email, the text would go on and on and overflows. I mean to say it doesn't autmatically hit the right hand side wall and change to next line! I have to manually press enter and then next line starts. Started happening suddenly.pls help.

    When i type my email, the text would go on and on and overflows. I mean to say it doesn't autmatically hit the right hand side wall and change to next line! I have to manually press enter and then next line starts. Started happening suddenly.pls help.

    Does it happen when you reply to an email? If so, it might be that there's content in the original email (like an image or something similar) that overflows the window content, therefore the Mail app, when you hit the border, follows the content below instead of going on a new line. You might wanna try that.
    Also: Please do not post the whole question in the question title.

  • I have OS and photoshop CC my spacebar doesn't turn into the hand anymore

    I don't know if I pressed a series of keys that took away the action of my spacebar turning into the hand tool but my spacebar now doesn't turn into the hand tool.  I have looked into the Keyboard short cuts and found the Hand tool.  It has an H next to it and that keyboard shortcut works, but I need the quickness of toggling between the hand tool and whatever other tool I'm using.  How can I get this back?

    I had this same issue and a restart would NOT fix the problem, neither would reseting the prefs, or any of the other solutions mentioned in forum posts.  I discovered the problem to be the Terminal application was automatically opening on login, which had the "Secure Keyboard Entry" option enabled. (Terminal menu item->Secure Keyboard Entry (check marked))  If I quit Terminal without disabling "Secure Keyboard Entry", the spacebar in Adobe Illustrator/Photoshop would work as expected.  Although, if I restarted with Terminal still loading automatically with "Secure Keyboard Entry" enabled then the spacebar would NOT work until I quit the Terminal app.  The problem is that when the computer logs into the user account and starts the Terminal app it hides the keyboard entry from other applications.  Somehow Adobe products are now sensitive to this and the spacebar stops working as is should.  So, the solution is to either make sure Terminal is not to load automatically at login, or disable the "Secure Keyboard Entry" option in Terminal and only enable it as needed.  Be sure to disable it when your are no longer using the terminal.  I have never seen this before and have been using Adobe products on OS X since its release, but I have not always used the Terminal as I do now in such a secure way.  Thanks again governments and criminals for even further complicating our lives!
    -Cheers

  • Please help me to find out how to turn off the shuffle feature on my touch i-pod, Please help me to find out how to turn off the shuffle feature on my touch i-pod

    Please help me to find out how to turn off the shuffle feature on my I-pod nano ... THANK YOU!!!!!! :)

    Just figured it out :) Thanks though!!!

  • Hi, I need help for my notebook Macbook Pro - I turned on the notebook and the screen look like start but did not start nothing, the screen froze and continuing load, load and never stop.

    Hi, I need help for my notebook Macbook Pro - I turned on the notebook and the screen look like start but did not start nothing, the screen froze and continuing load, load and never stop

    screen look on

  • The book who I selected doesn't move to the right in CheckedListBox and the reason is that I can't make an return.his code is good just for first user who I selected

    Imprumut = loan
    I have 6 tables: 
    I have one combobox(from where I select utilizatori(users)) and 2 CheckedListBox(Between first box and second box I have 2 buttons:imprumuta(loan) and restituie(return))
    This c# code works just for first user: Utilizator, but something's not good. When I add new utilizator(user) and select it,  the loan will be add in my SQL DataBase, but... the book who I selected doesn't move to the right in CheckedListBox and the reason
    is that I can't make an return
    using System;
    using System.Collections.Generic;
    using System.ComponentModel;
    using System.Data;
    using System.Drawing;
    using System.Linq;
    using System.Text;
    using System.Threading.Tasks;
    using System.Windows.Forms;
    using MySql.Data.MySqlClient;
    namespace proiect
        public partial class Imprumut : Form
            MySqlConnection con = new MySqlConnection("DataSource=localhost;UserID=root;database=biblio1");
            //stabilim conexiunea
            MySqlCommand comUser;//interogarea pe baza careia umplem comboBox
            MySqlDataAdapter adaptu;
            DataTable userT = new DataTable();
            MySqlCommand cmdCarti;//interogarea pe baza careia umplem checkListBox
            MySqlDataAdapter adaptCarti;
            DataTable CartiTabel = new DataTable();
            MySqlCommand cmdCartiImprumutate;//interogarea pe baza careia umplem checkListBox
            MySqlDataAdapter adaptCartiImprumutate;
            DataTable CartiImprumutateTabel = new DataTable();
            public int UserId
                get
                    return Convert.ToInt32(user.SelectedValue.ToString());
            void Completez_Combo_User()
                try
                    comUser = new MySqlCommand("SELECT n.userid, CONCAT(n.UserName) as UserN FROM users n left join userroles us on n.userid=us.userid left join roles r on r.roleid=us.roleid WHERE r.roleid='3'",
    con);
                    adaptu = new MySqlDataAdapter(comUser);
                    adaptu.Fill(userT);
                    user.Items.Clear();
                    user.DataSource = userT;
                    //DataTable din care sunt preluate datele pentru ComboBox user
                    user.ValueMember = "UserID";
                    //Valoarea din coloana UserID nu se afiseaza in combobox
                    user.DisplayMember = "UserN";
                    //Eelementele afisate in combobox, preluate din concatenarea mai multor coloane
                catch (Exception ex)
                    MessageBox.Show(ex.Message);
            void Completez_CheckList_Carti()
                try
                    cmdCarti = new MySqlCommand("SELECT BookID, CONCAT(title, ' ', ISBN,' ',author)as date_carte FROM books WHERE NumberLeft > 0 ORDER BY BookID", con);
                    adaptCarti = new MySqlDataAdapter(cmdCarti);
                    adaptCarti.Fill(CartiTabel);
                    imp.Items.Clear();
                    //carti.DataSource=null;
                    imp.DataSource = CartiTabel;
                    //DataTable din care sunt preluate datele pentru ComboBox carte
                    imp.ValueMember = "BookID";
                    //Valoarea din coloana BookID nu se afiseaza in combobox
                    imp.DisplayMember = "date_carte";
                    //Eelementele afisate in combobox, preluate din concatenarea mai multor coloane
                catch (Exception ex)
                    MessageBox.Show(ex.Message);
                void Completez_CheckList_Cartires()
                    try
                        cmdCartiImprumutate = new MySqlCommand(string.Format("SELECT b.BookID, CONCAT(title, ' ', ISBN,' ',author) as date_carte FROM books b inner join userbooks ub on ub.bookid = b.bookid
    WHERE ub.userid = {0} ORDER BY BookID", UserId), con);
                        adaptCartiImprumutate = new MySqlDataAdapter(cmdCartiImprumutate);
                        adaptCartiImprumutate.Fill(CartiImprumutateTabel);
                        res.Items.Clear();
                        //carti.DataSource=null;
                        res.DataSource = CartiImprumutateTabel;
                        //DataTable din care sunt preluate datele pentru ComboBox carte
                        res.ValueMember = "BookID";
                        //Valoarea din coloana BookID nu se afiseaza in combobox
                        res.DisplayMember = "date_carte";
                        //Eelementele afisate in combobox, preluate din concatenarea mai multor coloane
                    catch (Exception ex)
                        MessageBox.Show(ex.Message);
            void Inregistrez_imprumut_in_BD()
                int useridu = Convert.ToInt32(user.SelectedValue.ToString()); //useridu = id book
                int bookidi;
                try
                    DateTime azi = System.DateTime.Now; //  Data imprumutului
                    DateTime atunci = termenul.Value;   //  Data restituirii
                    MySqlTransaction tranzactie = con.BeginTransaction();
                    MySqlCommand adaugImpr = new MySqlCommand("INSERT INTO bookshistory(UserID, BookID,BorrowDate) VALUES(@UserID, @BookID, CAST(@BorrowDate as datetime))", con);
                    MySqlCommand scadCarti = new MySqlCommand("UPDATE books SET numberleft=numberleft-1 WHERE bookid=@bookid", con);
                    MySqlCommand adauga_userbooks = new MySqlCommand("INSERT INTO userbooks(userId,bookID)VALUES(@userID,@bookID)", con);
                    adauga_userbooks.Transaction = tranzactie;
                    adaugImpr.Transaction = tranzactie;
                    scadCarti.Transaction = tranzactie;
                    try
                        foreach (int i in imp.CheckedIndices)
                            imp.SelectedIndex = i;
                            bookidi = Convert.ToInt32(imp.SelectedValue.ToString());
                            MessageBox.Show(bookidi.ToString());
                                     //bookidi va fi id-ul cartea bifata, pe rand din checklistBox
                                     //Inregistrez in tabela imprumut
                            adaugImpr.Parameters.AddWithValue("@UserID", useridu);
                            adaugImpr.Parameters.AddWithValue("@BookID", bookidi);
                            adaugImpr.Parameters.AddWithValue("@BorrowDate", azi);
                            adaugImpr.ExecuteNonQuery();
                            adaugImpr.Parameters.Clear();
                            adauga_userbooks.Parameters.AddWithValue("@userID", useridu);
                            adauga_userbooks.Parameters.AddWithValue("@bookID", bookidi);
                            adauga_userbooks.ExecuteNonQuery();
                            adauga_userbooks.Parameters.Clear();
                                    //Scad numarl de carti disponibile pentru cartea imprumutat
                            scadCarti.Parameters.AddWithValue("@bookid", bookidi);
                            scadCarti.ExecuteNonQuery();
                            scadCarti.Parameters.Clear();
                        tranzactie.Commit();
                    catch (Exception ex)
                        tranzactie.Rollback();
                        string message = ex.Message;
                        if (ex.Message.ToLower().Contains("duplicate entry"))
                            message = "Una dintre carti mai exista deja";
                        MessageBox.Show(message);
                catch (Exception ex)
                    MessageBox.Show(ex.Message);
            void Inregistrez_restituire_in_BD()
                int useridu = Convert.ToInt32(user.SelectedValue.ToString()); //useridu = id book
                int bookidi;
                try
                    DateTime azi = System.DateTime.Now; //  Data imprumutului
                    DateTime atunci = termenul.Value;   //  Data restituirii
                    MySqlTransaction tranzactie = con.BeginTransaction();
                    MySqlCommand modificIstoric = new MySqlCommand("UPDATE bookshistory SET returndate = @returnDate WHERE userID = @userID AND bookID = @bookID", con);
                    MySqlCommand adaugCarti = new MySqlCommand("UPDATE books SET numberleft = numberleft + 1 WHERE bookID = @bookID", con);
                    MySqlCommand sterge_userbooks = new MySqlCommand("DELETE  FROM userbooks WHERE userID = @userID AND bookID = @bookID", con);
                    sterge_userbooks.Transaction = tranzactie;
                    modificIstoric.Transaction = tranzactie;
                    adaugCarti.Transaction = tranzactie;
                    try
                        foreach (int i in res.CheckedIndices)
                            res.SelectedIndex = i;
                            bookidi = Convert.ToInt32(res.SelectedValue.ToString());
                            MessageBox.Show(bookidi.ToString());
                            //bookidi va fi id-ul cartea bifata, pe rand din checklistBox
                            //Inregistrez in tabela imprumut
                            modificIstoric.Parameters.AddWithValue("@UserID", useridu);
                            modificIstoric.Parameters.AddWithValue("@BookID", bookidi);
                            modificIstoric.Parameters.AddWithValue("@returnDate", termenul.Value);
                            modificIstoric.ExecuteNonQuery();
                            modificIstoric.Parameters.Clear();
                            sterge_userbooks.Parameters.AddWithValue("@UserID", useridu);
                            sterge_userbooks.Parameters.AddWithValue("@BookID", bookidi);
                            sterge_userbooks.ExecuteNonQuery();
                            sterge_userbooks.Parameters.Clear();
                            //Scad numarl de carti disponibile pentru cartea imprumutat
                            //adaugCarti.Parameters.AddWithValue("@bookid", bookidi);
                            adaugCarti.Parameters.AddWithValue("@bookid", bookidi);
                            adaugCarti.ExecuteNonQuery();
                            adaugCarti.Parameters.Clear();
                        tranzactie.Commit();
                    catch (Exception ex)
                        tranzactie.Rollback();
                        MessageBox.Show(ex.Message);
                catch (Exception ex)
                    MessageBox.Show(ex.Message);
            public Imprumut()
                InitializeComponent();
                try
                    con.Open();
                catch (Exception ex)
                    MessageBox.Show(ex.Message);
                Completez_Combo_User();
                Completez_CheckList_Carti();
                Completez_CheckList_Cartires();
                //selecteaza_carti_utilizator();
                //  Initializez termenul din dateTimePicker la data de peste 15 zile fata de data sistemului
                termenul.Value = System.DateTime.Now.AddDays(15);
            private void imprumuta_Click(object sender, EventArgs e)
                Confirmare c = new Confirmare("Confirmati imprumutul?");
                DialogResult dr = c.ShowDialog();
                if (dr == DialogResult.Yes)
                    try
                        Inregistrez_imprumut_in_BD();
                        MessageBox.Show("Imprumutul a fost inregistrat");
                        //Dupa inregistrarea imprumutului o parte din carti nu mai sunt disponibile pentru imprumut
                        //Reincarc in CheckList cu Carti noua lista cu carti ramase dupa imprumut
                        //Pentru asta "resetez" datele din dataTable cartiT (sursa pentru carti.DataSource)
                        CartiTabel.Clear();
                        adaptCarti.Fill(CartiTabel);
                        CartiImprumutateTabel.Clear();
                        adaptCartiImprumutate.Fill(CartiImprumutateTabel);
                    catch (Exception ex)
                        MessageBox.Show(ex.Message);
                if (dr == DialogResult.No)
                    MessageBox.Show("Imprumutul NU a fost inregistrat");
                    imp.ClearSelected();
                    //deselecteaza cartea selectat
                    foreach (int i in imp.CheckedIndices)
                        imp.SetItemChecked(i, false);
                    //debifeaza cartile bifate
                //if (imp.CheckedItems.Count > 0)
                //    //res.Items.Clear();
                //    foreach (string str in imp.CheckedItems)
                //        res.Items.Add(str);//adauga in partea cealalta, imprumuta
                //    while (imp.CheckedItems.Count > 0)
                //        imp.Items.Remove(imp.CheckedItems[0]);
            private void restituie_Click(object sender, EventArgs e)
                Confirmare r = new Confirmare("Confirmati restituirea?");
                DialogResult dr = r.ShowDialog();
                if (dr == DialogResult.Yes)
                    try
                        Inregistrez_restituire_in_BD();
                        MessageBox.Show("Restituirea a fost inregistrata");
                        //Dupa inregistrarea imprumutului o parte din carti nu mai sunt disponibile pentru imprumut
                        //Reincarc in CheckList cu Carti noua lista cu carti ramase dupa imprumut
                        //Pentru asta "resetez" datele din dataTable cartiT (sursa pentru carti.DataSource)
                        CartiTabel.Clear();
                        adaptCarti.Fill(CartiTabel);
                        CartiImprumutateTabel.Clear();
                        adaptCartiImprumutate.Fill(CartiImprumutateTabel);
                    catch (Exception ex)
                        MessageBox.Show(ex.Message);
                if (dr == DialogResult.No)
                    MessageBox.Show("Restituirea NU a fost inregistrata");
                    res.ClearSelected();
                    //deselecteaza cartea selectat
                    foreach (int i in imp.CheckedIndices)
                        res.SetItemChecked(i, false);
                    //debifeaza cartile bifate
                if (res.CheckedItems.Count > 0)
                    foreach (string str in res.CheckedItems)
                        imp.Items.Add(str);
                    while (res.CheckedItems.Count > 0)
                        res.Items.Remove(res.CheckedItems[0]);
            private void button2_Click(object sender, EventArgs e)
                con.Close();
                this.Close();
            //private void selecteaza_carti_utilizator()
            //    res.Items.Clear();
            //    MySqlCommand selectcart = new MySqlCommand("select title from books,userbooks where userbooks.userid='" + user.SelectedValue.ToString() + "' and userbooks.bookid=books.bookid", con);
            //    MySqlDataReader reader = selectcart.ExecuteReader();
            //    try
            //        while(reader.Read())
            //            res.Items.Add(reader["title"]);
            //    catch(Exception ex)
            //        MessageBox.Show(ex.Message);
            //    finally
            //        reader.Close();

    Hello Vincenzzo,
    This issue seems to be a window form UI implemented related issue, for this i suggest that you could ask it to the windows form forum:
    http://social.msdn.microsoft.com/Forums/windows/en-US/home?forum=winforms
    The current forum you posted to is used to discuss and ask questions about .NET Framework Base Classes (BCL) such as Collections, I/O, Regigistry, Globalization, Reflection.
    Regards.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • When i take a picture from left its turning to the right and the other way. Howcan i stop that?

    When i take a picture from left its turning to the right and the other way. Howcan i stop that?

    Hi Cecilie1,
    I apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are having issues with photo rotation, you may want to make sure that your iPhone is detecting the orientation when you take the photos. In iOS 7 and iOS 8, the top menu text when taking a photo should rotate to show orientation (the bottom menu stays oriented to the shutter button). You can see these menus on the following page:
    Camera at a glance - iPhone
    If your iPhone isn't sensing rotation for pictures, you may want to check to see if the Rotation Lock is engaged, as noted here:
    If the screen doesn't rotate on your iPhone, iPad, or iPod touch - Apple Support
    Regards,
    - Brenden

  • How do I find a file to reconnect my missing file to when it doesn't show on the right hand side?

    How do I reconnect a missing file when it doesn't show on the right hand side?

    What do you mean by "missing file", or "reconnect", or "right side"?
    You haven't given us enough information to understand what you're referring to, much less to help you.

  • How do I turn turn off the right pane in Adobe Reader XI?

    I have been using Adobe Reader since 2007, and recently I have been unable to turn off the right pane while reading. If anyone knows how I can deal with this problem, I would really appreciate it.
    Thanks
    Don Randall

    How To Turn Off The Right Pane
    To stop the "Tools|Comments" sidebar from automatically opening every time you open a PDF so that you can view your PDF in full screen, this solution worked for me on both my desktop PC and laptop.
    This is the solution:
    Go to C:\Program Files (x86)\Adobe\Reader 11.0\Reader\Services (for win7 64-bit) or C:\Program Files\Adobe\Reader 11.0\Reader\Services (for win7 32-bit)
    Find and Delete these 2 files: DEXShare.spi and DEXEchoSign.spi
    Yes, you will still see the word "Tools| Comments" at the top but at least your PDFs will open in full screen and you won't have to click "Tools" to hide that stupid sidebar every time you open a PDF.

  • Zen Micro 5GB Won't Turn On Using The Switc

    Hi had my Zen Micro 5GB since xmas 05 and never had a problem until 2 weeks ago when my headphone jack came loose and my sound became absolutely rubbish. Found a guide on the internet and fixed the problem by soldering the joins. Now works fine. But however jus 20mins ago i uploaded some new songs to it using the Creative organizer, no problems. Unplugged after transfer completed. I listened for about 5-0 mins and then turned it off. Came back and it now does not turn on at all using the switch!!!!. The only possible way to turn it on is to use the USB cable which is frustrating when your at school or out and about. Is there any possible way to fix my problem? If so any help will be grateful?Thanks?Ben?30th March 2007 - Just taken apart the power switch, and found a small rectangular shaped clip (with 2 indented grooves in v-shapes). Has his clip got a perticular place to go and if so where?Any help would be grateful?Thanks BenMessage Edited by BenBarber77 on 03-30-200709:29 AM

    Try going into Recovery Mode first, and try the options there.
    Try Clean Up first. If the player still works on the PC (ie you can access it there), then you could try Reload OS aswell, and then load a firmware onto the player from the PC. Otherwise it does sound like it's faulty, there is not much I can advise other than speaking to Customer Support about a possible repair.
    Cat

  • Zen Micro 5GB, Won't turn o

    Hey guys,
    I bought a zen micro 5GB back in June of 05, its obviously past the 60 day warrenty and im trying to advoid a $20 session which might not even solve my issue....
    A week ago the player stopped turning off. I am able to turn it on with the power tab, play music, charge it, everything its supposed to except power it off. The only way for me to do so is to take out the battery casuing me to rebuild my library constantly.
    Does anyone have a makeshift fix for this? Does anyone have a similar problem and can give me insight as to what creative can do and how much it will cost? Any other ideas?
    I called support and they will not give me an estimate unless i pay the $20 phone session charge...
    I still have the orig box, receipts, and information that came with the product. There is little to no wear on it as i ONLY use it to upload music from my pc then play it on a personal stereo system i have in the house.
    ThanksMessage Edited by forcex on 03-08-200603:06 PM

    Try going into Recovery Mode first, and try the options there.
    Try Clean Up first. If the player still works on the PC (ie you can access it there), then you could try Reload OS aswell, and then load a firmware onto the player from the PC. Otherwise it does sound like it's faulty, there is not much I can advise other than speaking to Customer Support about a possible repair.
    Cat

  • Zen Xtra Backlight doesn't turn off, OS free

    A problem started today where my 40gb Zen Xtra can no longer get past the EAX screen, and stays lit the entire time. I'm unable to turn it off except by removing the battery, and as soon as I put the battery back in, it automatically turns back on and freezes again. I reset, then I went to recovery mode and cleaned up the OS, but the same problem persists.
    I notice that at some point from the time the player turns on to the time it freezes, I feel my hard dri've stop vibrating, and I wonder if that has anything to do with it.
    Any suggestions or ideas?
    Thanks!

    my zen xtra has done the same thing. it wont turn off. it wont go any further. i have gone to the rescue mode and tried all the options except reloading the os because i am afriad then i wont even have a os since it wont connect to my computer thru USB either. this is the second time i have had a major problem with it. the first time it completely failed on me and went to rescue mode everytime i turned it on. i eventually had to get a rma for it because the hard dri've had failed completely. will i need to do that again cause i have looked at every piece of advice available and nothing has helped.

Maybe you are looking for

  • Yellow Battery Heating up

    Has anyone run into the Pearl battery heating up? My has done it a couple of times where the whole device is heated up because of the battery, I take out the battery, put it back in a minute later, it cools down, but the charge has completely drained

  • Background scheduling of recurring document postings

    Hi Freinds, I have 3 recurring entries every month, Lets say 1 should rum on 1st of everymonth, 2nd one should run on 4th of every month and 3rd entry on 10th. I hve created 3 recurring docs in FBD1. Instead of go ro F.14 and create batch job every m

  • 2 iPhones, 1 iTunes Account, and 1 or 2 iCloud Accounts???

    I have 2 iPhone 4, a Macbook Pro, Macbook, Mac Mini, and Apple TV.  I am trying to setup the 2 phones to share to same iTunes account, contacts, and calendars.  However, I need each device to have different apps and backup to iCloud. Can i use 2 diff

  • Workorder_goodsmvt badi for COR6n Tcode

    Hi guys,        I need to restrict the quantity field to be changed during production in COR6N.For this i found the badi workorder_goodsmvt.In that i wrote code in GM_SCREEN_LINE_CHECK method.but this method is not triggering...Can anyone please tell

  • Reset config files for a package

    According to https://wiki.archlinux.org/index.php/Pa - save_Files I have this situation in my config files: original = X, current = Y, new = X Is there a way to set current config files of package to X and save Y as .pacsave OR install X as .pacnew a