Help, my ZMP has a blank screen and the glow function is stuck the

I know for certain my battery was low, what can i do? It won't turn off, and the glow is still on?

Actually, Apple will exchange your iPod for a refurbished one for this price:
Apple - Support - iPod - Repair pricing

Similar Messages

  • My ipod has a blank screen and the computer won't see it

    Ok, I have an ipod video that I just got from the apple repair shop about a week ago, and it's not working at all. I'm pretty sure I got a virus on it from a song, but I can't do anythign because the computer won't read it. It's had plenty of charge, I had it plugged into the wall for hours and then plugged it into my computer and it doesn't even read it, and when it's plugged in I can't even open iTunes. Anyone else having this problem?

    hmmm. it might be worth checking through the following document:
    Fifth Generation iPod has a blank backlit display and beeps 3 times

  • Help I just get stuck with the blank screen and the white circle

    help I just get stuck with the blank screen and the white circle after i erase all content and setting
    i dont know how to do pls help.

    Try connecting the device to your iTunes library and restoring it.  If necessary place the iPod into recovery mode using the instructions in this Apple support document.
    iOS: Unable to update or restore
    B-rock

  • My ipod has just black screen and the home button is not working. what will i do? help please!

    my ipod has just black screen and the home button is not working. what will i do? help please!

    Try:
    - iOS: Not responding or does not turn on
    When it says place the iPodin recovery mode use this prgram.
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I've had my MacBook Air for not even a year and about 2 months ago i tried opening my Iphoto, but it continually sits with a blank screen and the loading wheel just spins. Someone help :(

    I've had my MacBook Air for not even a year and about 2 months ago i tried opening my Iphoto, but it continually sits with a blank screen and the loading wheel just spins. Someone help

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • TS3274 my ipad has a black screen and the apple logo and won't do anything else. I have tried to reset it but to no avail.

    My ipad has a black screen and the apple logo and won't do anything else. I have tried to reset to no avail.

    Try and force iPad into Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • My Ipod touch has a blank screen and will not turn on. I have chaged it for a hour and tryed troubleshooting but nothing works. i need help getting this to work

    My ipod touch has a black screen and will not turn on. i have charged my ipod and tryed troubleshooting but nothing seems to work. what can i do to have my ipod turn on again?

    See Here...
    Frozen or unresponsive iPod touch
    Try this First... You will not lose any Data...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    http://support.apple.com/kb/ht1430

  • My Mac Book Pro 17" has a blank screen and won't boot up?

    My Mac book Pro 17" the screen started to scramble and I restarted the computer....I then got a grey screen and the computer never booted up again....Any ideas?

    Hey Julius62,
    Thanks for the question. After reviewing your post, it sounds like you have a gray screen during startup. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    Mac OS X: Gray screen appears during startup
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • My MACBOOK pro comes on but had a blank screen and the circle keeps spinning- not connecting

    My MacBook Pro comes on but nothing displays , just a blank screen with the apple logo  and a spinning wheel? How do I get the screen display back?

    Start with this trouble shooting guide:
    https://discussions.apple.com/docs/DOC-5282
    It would be helpful if you provided the EXACT model MBP you have and the OSX.
    Ciao.

  • My ipod has a white screen and the home button doesnt work

    my ipod has a white screen and my home button doesnt work so how can i fix it?

    Try as best you can:
    - iOS: Not responding or does not turn on
    When it says place the iPod in recovery mode use this program
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • IPod has a blank screen and won't do anything?

    I took out my iPod 5th gen to check the time and it was fine. Then I took it out 5 minutes later and it had a black screen so i clicked the home button. Nothing happened. I've tried the power button, the home button, holding down the power button, and plugging it into a charger and nothing has helped. It's still on a black screen and won't respond to anything I do. What should I do?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My iPhone 4 has a blank screen and wont respond.

    Hello,
    while i was on holiday i was using my phone normally, i put it in my pocket, the about half an hour later took it out and the screen was blank and it would not respond.
    I have tried, holding the screen lock button, charging it, plugging it into my laptop and I have also tried to reset it (holding down the home button and screen lock button) and nothing is working!
    When i was using it it had full charge so i dont know what is wrong with it.
    HELP!
    thank you

    https://discussions.apple.com/message/19493283#19493283

  • HT1338 My Mac Book Pro has a blank screen and will not respond to anything.  How do I turn it off or back on.  No key respondes

    Mac Book Pro will not respond.  Only has blank screen.  How do I get it to respond?

    Any resolution to this ?????

  • My iPod keeps showing the apple logo + a blank screen and the lock screen keeps freezing when trying to unlock it.

    Last night I turned my iPod touch 4g off randomly and then when I went to turn it back on and went to unlock the screen it froze up right there and will not unlock to the home screen to where all my apps and all that are. Ever since that happened the iPod keeps showing the apple logo repeatedly, as well as a screen being completely blank when still turned on. Also when i plug in the iPod to the computer it recognizes it for a second but the iPod does nothing and shuts off and repeats in showing the apple logo and blank black screen. I can get it to the home screen where the slide to lock button is but every time i even attempt to slide it, it freezes up and doesn't do it.
    I also having been trying to restore it by plugging in the cord and pressing the home button to get the screen with the usb cord to pop up but no matter what i do, it will not let me turn the iPod off period because every time i keep trying to do that it just shows the apple logo and all of what i said up above again. I have also seen it get a white screen to show a few times , which i assume means the white screen of death. I have never seen that screen before this happened.
    I know this is not making any sense whatsoever but this is very hard to put into words in explaining. I have searched the internet but i can't find a single problem that sounds like this one in solving to fix it. The iPod is on right now as i'm typing this. I haven't attemtped to push the buttons down again to fix as i would assume maybe to just leave it alone as i sleep through the night in hopes of it maybe working or even dying. I've only had this iPod for 4 months now and i just don't understand why it won't let me turn it off completely or work properly for me to restore it.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My Curve 9220 has a black screen and the LED light blinks red every 5 seconds

    The phone won't come on and the light blinks red. I dont know what to do 

    Hi there,
    If you have a good battery or the batttery is good enough then try those steps , it may help :
    ( Credit JSanders )
    1) Make sure you have Blackberry Desktop Manager installed. BlackBerry desktop software
    2) On your PC, go to Start > Run and copy and paste the following line exactly (meaning with the quotation marks):
    "c:\program files\common files\research in motion\apploader\loader.exe" /nojvm
    3) The Application Loader Wizard will appear -- click "Next."
    4) In the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN". Click the "Next" button.
    5) You should then see a list of applications ready to be installed for your Blackberry. Hit Next and Finish and you are well on your way to getting your Blackberry back to life. Congrats! Just don't disconnect anything and let the lengthy process finish completely.
    NOTE: If you do not see a list of applications mentioned in step 5 and instead see the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator," then you must download Blackberry's Operating System for your carrier and device.  BlackBerry Software Download Site
    Just select the appropriate carrier and network type, select your Blackberry model from the list and download the latest version. Install this download and follow the above steps again and you should be on the right path.
    Good luck.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Maybe you are looking for

  • Unique id for calling thread

    A stored proc can be called by any of the say 200 threads from within a pool of java connections that all sign on with say USER1. Another similar pool can call the same proc that are signed on with USER2. Inside the proc I need to store some SYS_CONT

  • Airport data app no longer works

    Since iOS 6.  Reverts straight back to home page.  IPlane radar now defective, too.  And no developer site to go to.

  • Disappointed in Sony's MirrorLink suport

    Seems like Sony developed these recievers to only be compatible with phones available 3 years ago and refuse to do any additional updates.  I bought the 712HD just 3 months ago and its already out dated.  Heck it was outdated when I got it,  after a

  • Custom Icon for iPhone Home Screen

    Does anyone know if there's a way to upload an icon to the site so that people can add it to their iPhone home screens? Thanks!

  • Installation problems updating from v6 update 11 to v6 update 12

    Thank you for helping. I am running XP Home SP3 and IE 7. I uninstalled update 11 and then attempted to install update 12. When I click on the installer I get a message saying "This software has already been installed on your computer. Would you like