Help! - N80 as a dial-up modem not through GPRS

Does anybody know if it is possible to use the N80 to connect to a laptop for dial-up connection to my ISP. I'm talking about actually dialing a phone number to connect and not through GPRS (tethering). I already got tethering working, I'm just wondering if it is possible to get it to actually dial a phone number to connect. I have a lot of anytime minutes in my Cingular account and want to use them for this purpose. Thanks in advance.
What is the correct AT script to use for this to happen?

I think SIG has the answer, but I tried to find out on their various sites... seems that until you take the Hook, they won't tell you what the Line costs, then the cost of the Sinker will only be revealed once you get the Bill!
I think if they've picked up any traits from down here in GW land, that whatever YOU want to do will cost more than expected, and use the worst option for you!

Similar Messages

  • Dial-up Modem not detected

    Problem:
    My system isn't recognizing/finding my internal modem.
    What I have:
    wvdial and gnome-ppp set up.  From the Wiki, I gave all users permission to use wvdial.
    What I know:
    I ran PuppyOS and was able to get the modem to work - so it's there and functions. (PuppyOS uses wvdial) The modem is at /dev/ttys_PCTELO and I have an init string (though it's a bit different than the one gnome-ppp shows.)
    Question:
    How do I get Arch to find the modem?

    Maybe you could take a look at:
    http://wiki.archlinux.org/index.php/Dia … aler_HOWTO
    It (supposedly) enables you to connect without a dialer.

  • Are there any webcams that work on a dial-up modem with OSX  Tiger?

    I've seen some discussions about specific webcams, but my problem is I'm on a dialup modem, without broadband. Though webcams exist that will work adequately for me with OS 9.x, there does not appear to be anything anywhere in the market that will work for with Tiger. The closest are the Logitech cams that stop at 10.2. Anybody have any suggestions?
    Powermac G5   Mac OS X (10.4.4)   dial-up modem. not broadband available (I'm in the sticks)

    Firewire cameras are natively supported in OSX.
    Many USB cameras are supported using 3rd party
    driver
    such as <a</div>
    href="http://webcam-osx.sourceforge.net/"
    target="_blank">maccam.
    You can also get drivers from ioxperts
    Tim,
    Thanks for the quick response. However I was not
    asking about digital cameras, I was asking about
    webcams. Am I missing something?
    Yes you are missing something. I was talking about
    firewire webcams doh!
    http://www.macworld.com/2003/12/reviews/firewirewebcam
    s/
    I've been following detailed threads on specific
    webcams, and have not seen anyone have success for my
    situation.
    What do you need a webcam for?
    Tim,
    Thanks again. I'm learning a lo already by following your suggestions. I have no high-power needs, just basic video chattiing, but I'm in the sticks out here, on a 56K dial-up modem. Can't even get broadband. Many of the cams I've seen require high-speed internet. I can continue searching.
    I will mark this question as answered by you, but if you have any particiular cameras to suggest, I will appreciate your inputs. I had already looked at Macworld without success.
    brinum

  • Help please! 6500Slide Modem not found???

    I got my 6500Slide phone in July 2008.
    For the past 8 months, I had successfully been using my phone as a modem on my Laptop.
    Last week I upgraded my phone's software (from V04.85) to Version 09.40
    Since then I can not use the Internet Connection on the PC Suite.
    (It just reads: Modem not found!)
    I have de-installed and re-installed the PC Suite, switched off my phone, took out the sim and tried to configure again, but nothing is working.
    Has my modem been damaged or erased??? 
    Can I download a modem...??? ;-p
    (Oh, PS - I can only use my USB connection, since my Laptop is not Bluetooth enabled!)
    Message Edited by ekiselizabeth on 26-May-2009 09:15 AM

    See my answer to you in your other posting related to a 404 error

  • File sharing with Leopard through dial up modem on Performa 6400

    There are some really important files that i need to get off my Macintosh Performa 6400 (running 8.6) but the only connection that my iMac G5 (running 10.5.4) and the performa share is the dial up modem. I can't get an internet connection on the performa since we have broadband and it does not have an ethernet port, so that's out of the question. Some of the files are too big to fit on a floppy and my iMac doesn't have a floppy drive anyways.
    I turned on file sharing on both computers, but they don't see each other being as they're connected through the dial up modems. After having searched up and down Google with no answer, my question is: is there anyway i can file share through the dial up modem using the aforementioned configuration?
    Since I'll only need to do this once, I don't want to have go out and buy something in order to get this to work.
    Thank you for any and all help you guys may provide.

    I realise that you didn't, originally, intend to spend anything but, if you have a spare PCI slot left in your 6400. I wonder if maybe installing a Keyspan USB PCI card would help. That way the 6400 could communicate direct with the G5 and save the hassle of removing its HD.
    http://www.allmacshop.co.uk/proddetail/19184/KeyspanUSB_PCI_Card_2-Port_Mac_Win__UPCI-2/
    The manufacturer's part number is UPCI-2.
    I installed one of these in my PowerMac 6500/300. Turned to be one of my better decisions as I was then able then to import photos direct from my digital camera and all sorts.
    Or there's this which is better still-
    http://www.macheaven.co.uk/?page=proddetail&prod=1343
    Check compatibility with your 6400 though as I don't have one of these so I don't know if it works or not. Don't see why it shouldn't though.

  • How to use Graphite Airport dial-up modem in Lion?

    I'm helping my father in law troubleshoot an issue with his Graphite Base Station.  He connects to the net via the built-in dialup modem and has recently updated to Lion.  He's used to a pop-out menu that says "dial modem" or something when selecting his base station from the airport menu.  Apparently, there is no such menu in 10.7 Lion.  How can he dial his modem to connect in Lion?  I've walked him through Airport Utility and all the settings say to use the built in modem. 
    Thanks for any help you can offer.
    -Rhod

    I am having the same issue. I have the white base station. Airport does work and works well without incident for my wireless printing. I only get the "disconnect" in the drop down menu. What I did for now is to go into the airport utility, select manual setup, select internet, select modem, and check the box that says automatically dial. While this seems to work for me, I do notice that while it will automatically dial, when you disconnect, it will automatically dial again. So, technically the airport will reconnect always. One way around this I suppose, as I do not care because I use my land line mostly for Internet access, is to go into the utility and uncheck the box when you do not want to connect or unplug the airport. Hope this helps. Otherwise, I am still trying to find a solution or go back to snow leopard.

  • Using E52 as a dial-up modem to connect to other a...

    Gidday, I use to have a nokia 6300 and was able to use it as an anolouge modem to dial other modems using the default string AT&F. I now have an E52, the modem initialises ok but comes up with modem error when starting to dial. I have the factory modem strings from both phones. Does anyone know how to change the strings?. Or what strings should I use to initialise my phone modem. Thanks

    I have follow your instruction to connect to my ISP as it shows the following message:
    Serial connection established.
    using interface sppp0
    connect: sppp0 <--> /dev/ttya
    local IP address xxxxxxxx
    remote IP address 1.1.1.1
    But when I ping www.sun.com, it shows:
    www.sun.com unknown.
    I start Mozilla and it said www.sun.com not found etc...
    What has gone wrong?
    Do I have to configure some files such as:
    /etc/resolv.conf
    /etc/hosts
    /etc/hostname ?
    or any other steps that can help me to connect to the internet?
    Thanks...

  • ATA Dial-Up Modem

    I would like to use my ATA 186/188 to operate with a dial-up modem. I understand that this configuration is not supported, but some users have gotten it to work using fax configuration's on their 186. I have the following configuration on my 186 and it does not connect:
    AudioMode: 0x00150015
    ConnectMode: 0x90000400
    LBRCodec: 1
    Does anyone have a known configuration that would work for this use? Maybe I need to add a command to my router? Thanks in advance.

    This doc should help you. We followed this doc and we are able to use the ATA's as modems. Mind you that it certainly isn't the greatest of speeds.
    http://cisco.com/en/US/products/hw/gatecont/ps514/products_administration_guide_chapter09186a00800c4d1e.html

  • Apple Internal Modem not working since installing OS X 10.5.2

    Folks,
    A friend of mine just installed 10.5.2 on his G4 Tower which has an Apple Internal 56k modem.
    The modem was working properly under 10.4.11.
    Now that he is using 10.5.2 the modem will not dial.
    Network (in System Prefs) sees that there is a modem, since it allows him to create an Internal Modem connection, but it will not dial the modem.
    Has anyone else seen this issue? Any solutions out there?
    Thanks!
    Tony

    Tony, 
    The +Intel iMacs+ don't have internal modems so you probably won't get much help around these parts. Try posting over in the PowerMac G4 forums:
    http://discussions.apple.com/forum.jspa?forumID=581
    http://discussions.apple.com/forum.jspa?forumID=587
    mrtotes

  • MacBookPro and dial up modems

    Heya, Ive recently bought my first mac (madbook pro) and want to connect it up to my onetel broadband modem.
    i have installed the original onetel cd, installed the upgrade for OS 10.4, and the software is in my applications so must be installed, but when i plug the modem in, it flashes red and doesnt aknowledge theres a port in my network settings.
    help?!

    Hi
    If I am not mistaken, u want a solution in which u need a dial-in access router with external AAA auth. server...Am I right?
    You need a Cisco Router 2811 with NM-1ce1t1PRI card.
    http://www.cisco.com/en/US/products/ps5881/index.html
    The authencation requests can be directed to your IBM server using AAA redirect.
    http://www.cisco.com/warp/public/793/access_dial/security.html#specaaa
    Hope it helps.
    Pls rate all posts.
    Regards
    JD

  • MeetingPlace Express 2.1.1.2 Dial Out was not Successful

    I'm configuring a MeetingPlace Express v.2.1.1.2 and I can't make the MPX do the call to the guests of a meeting.
    I make the configuration test in: Services > Logs > Verify Configuration > Call configuration verification and show the following error:
    ==============================================================
    ==============================================================
    Call-Config Report
    Summary   
    WARNING:The H.323 ID should match the host name   
    Valid E.164 Address has been configured   
    H.323 gateway has been configured   
    Error: Dial Out was not Successful   
    Call-Config Report Details
    H.323 Details   
    H.323 enabled : YES   
    E.164 address : 196   
    H.323 ID : mpxadmin   
    H.323 gateway 1 : 010.145.002.030   
    SIP enabled : YES   
    DialOut Session Summary  
    VUI Configuration: 250 Sessions, 250 Confs   
    *** VUI INTERNAL STATUS UTILITY ***
    DebugMenu:   
    1) Quick Status of all Ports 4) Make Test Call   
    2) Verbose Status of Port Range 5) Show All Confs   
    3) Display complete Port Information 0) Quit   
    Enter the Command (0 -- 100) []: You entered 4.   
    Enter destination for your call: The Telephone Number is 196. Len is 3   
    Do you want specific ports? (t -- F): You entered f.   
    Placing Call .....Call was unsuccessful: Ring No Answer.   
    DebugMenu:   
    1) Quick Status of all Ports 4) Make Test Call   
    2) Verbose Status of Port Range 5) Show All Confs   
    3) Display complete Port Information 0) Quit   
    Enter the Command (0 -- 100) []: You entered 0.
    ==============================================================
    ==============================================================
    That parameter could check?
    Here I place information on the configuration of my network:
    CUCM v.7.0 --> 10.145.2.10
    Voice Gatweay --> 10.145.2.30
    In CUCM > Device > Gateway --> Gateway: 10.145.2.20 | Description: Cisco MeetingPlace Express | Type: H.323 Gateway | IP: 10.145.2.20
    Please expect your valuable help!
    Thanks a lot!
    ErnestoG

    hi Ernesto,
    As the problem you are facing is a dial out issue on MPE,  go
    through the checklist mentioned below in order to confirm the configuration
    is intact.
    Here is the checklist :
    1.    Ensure that H323 GW is defined on CCM/CUCM.
    Device > Gateway > find.
    Look for a device name that equals either MPE's hostname, FQDN, or IP
    Address.
    2.    Ensure that h323 Gateways are configured on MPE.
    MPE Administration Center > System Configuration > Call Configuration > H323
    Configuration
    Ensure that h323 is enabled.
    Ensure that you have entered your CCM's IPs in h323 Gateway 1, 2
    3.    Ensure that CCM's interface with MPE is up.
    Ensure that MPE's IP Address is listed under the "IP Address" column.
    Ensure that this IP Address is that of the FIRST NIC on MPE, not the second.
    4.    Verify that MPE has the CSS required to call the destination.
    FIRST, FIND MPE's CSS:
    When MPE places a call, the CSS in question is Device > Gateway > MPE-GW >
    Inbound
    THEN the relevant config is under Device > "Call Routing Information -
    Inbound Calls" > Calling Search Space
    SECOND, FIND DESTINATION PATTERN's PARTITION:
    If the destination is an IP Phone within the CCM/CUCM Cluster, then the
    relevant config is under Device > Phone > click on Directory Number in CCM.
    If the destination is a PSTN endpoint/phone, then the relevant config is
    under Device > Route Pattern.
    5.    Ensure that your user profile is set to allow outdials.
    MPE Administration Center > User Configuration > User Profile Management >
    Your User Profile > Can call out of meetings should be set to "Yes".
    6.    When you place a call from  from the CLI, the system applies permissions
    from the "Guest" User profile since mpxadmin  or root are not Users within
    the MPX application. To allow this to work, you need to  verify two
    settings:
    MPE Administration Center > User Configuration > User Profile Management >
    Guest > Can call out of meetings should be set to "Yes".
    Ensure that the Guest profile is not in a "locked" state.
    MPE Administration Center > System Configuration > Usage Configuration >
    Allow Guest outdials should be set to "Yes".
    Hope this helps!
    Thanks,
    Karthik

  • HELP - Receiving error message "The file has not been processed. An error has occurred which stopped the processing of the PDF"

    Have been using Adobe CreatePDF for many months successfully.
    Only recently over the past few days I have been experiencing errors for periods between 3-5 hours on every attempt to convert/combine files. The error reads: "The file has not been processed. An error has occurred which stopped the processing of the PDF"
    It will stay like this and no amount of refreshing the cache, logging in and out will help. I'm running Firefox 34.0.5, windows 7 64bit. Only solution I've found is to wait until the next day and it seems to be working again. Only explanation i can think of is some unexplained maintenance adobe is running behind the scenes because I'm often working late between 12am - 4am.
    When this problem happens, no file types will convert/combine I've tested JPEG, PDF and word docs to PDF.
    I log in and out of my account, I've cleared my cache, I'm using Firefox 34.0.5 which has always worked in the past I just don't understand how this error is happening for such long periods. Starting to reconsider this product when there are free alternatives to simply combine my PDF docs! please help.
    Tom.

    I am still experiencing this problem. Customer service from Adobe has been abysmal!
    I called Adobe tech support at 2am Australian time ( >1 weeks ago) and got onto a help centre in India. I was walked through all the troubleshooting steps and they remotely accessed my PC and confirmed that It was not my PC that was at fault. They reset my password and dialed into my adobe account from their end to attempt a simple conversion and export to PDF which failed. I was told that this problem is not something they can fix, and is a result of something on the back end of their software.
    They advised me that the problem would be passed to a fixed within 12 hours and they would call and email me to confirm everything was OK. I gave my phone number with (area and country code) my email but have not had any communication back.
    I am extremely dissatisfied, and just want this software to function. Is that too much to ask?
    Note: This problem is happening always now, regardless of time being used.
    Tom

  • What sort of dial-up modems does one use with a "Bionic Desk Lamp" iMac?

    Yes, I still use dial-up (and indeed, my aging Performa 5215 is still on its factory 14.4 modem).
    I'm planning on buying a used G4 iMac on eBay (see my posting in the OS 9 forum for related questions), but what sort of dial-up modem do I use, that will work in both OS 9 and OS X?

    Outside of perhaps a handful of top-end machines, printing on special media, I've never seen inkjet output that looked any better than MicroDry output on comparable media. Moreover:
    1. With the exception of hot-wax-jet systems, inkjet output is soggy, and takes time to become waterproof (assuming that ever happens without spraying varnish on the page); MicroDry output is as dry and waterproof as laser output.
    2. Inkjet has the highest cost of consumables of any printing technology ever devised. If you use your printer like crazy, you rapidly empty the often-expensive cartridges. If you don't use it like crazy, the often-expensive cartridges clog and/or dry out. By contrast, laser toner and MicroDry ribbons have a once-opened shelf-life that is whole orders of magnitude greater than that of inkjet cartridges, and the only way to ruin them is to (laser) print so many blank pages you overflow the waste-toner receptacle, or (MicroDry) break the ribbon (and that can be fixed with about half an hour's work)
    3. MicroDry is one of the few printing technologies that can print metallic colors and opaque white, and can also automatically varnish their output. The more advanced MicroDry models also have a dye sublimation mode (with optional varnish) that allows them to double as the cheapest-to-run dyesubs available.
    The ALPS MicroDry printer line flopped in the marketplace for two reasons. First, they didn't offer PCL or PostScript, even as an option, and (especially in dyesub mode) host-based RIPping is a long, slow, memory-intensive process (that's been known to crash my long-suffering Performa 5215). Second, ALPS has absolutely no name recognition in the United States except among engineers and technicians. This meant that they were fighting an uphill battle just to get anybody to look at their products.
    Moreover, the few attempts ALPS made at strategic alliances (to overcome the lack of name recognition) were with a company (Citizen) that isn't known for much beyond digital watches and (maybe) hand calculators, and a company (Epson) that had strong financial reasons to suppress MicroDry, color laser, and anything else that competed with inkjet.
    On that last note, may I point out that when a color laser printer small enough, cheap enough, and quiet enough to be classified as an "inkjet-killer" finally hit the market last year, it came from Samsung, a company that had name recognition, but absolutely no inkjet assets whatsoever.

  • Need a dial up modem for G3 Beige Tower

    I have an ethernet card for my G3 Beige Tower but I need a dial up modem so I can hook it up for my mom. Anyone know where I can get one? Milwaukee

    The internal 56K Apple/GV modem card that was a Build-to-Order option for the beige G3s offers the convenience of no additional desktop clutter, no extra power supply to bother with, and nothing to turn ON/OFF. It plugs into the brown slot on the audio or A/V personality card. You can see one listed on this page, but the $99.77 price tag is absurd, in spite of its scarcity now. When I stopped buying them a few years ago, used ones could be purchased for about $35. The internal 56K modem card functioned identically as its external Global Village 56K counterpart. If you have the time to keep checking eBay, you may find an internal Apple/GV 56K card eventually show up for auction. Just be sure that it matches the photo shown on the page I linked. Some sellers (mistakenly or not) identify the software-based "Apple GeoPort" modem card as the 56K modem card - which it definitely isn't. For a reliable 56K external modem, the US Robotics 56K v.90/x2 (model 5689-03) was always my choice for the internet and downloads. The Global Village TelePort 56K v.90 external modems with attached modem cable are also a good choice for the beige G3s. These modems are discontinued, but you can find them showing up at eBay or thrift stores. The current US Robotics v.92 external modem (black color and marketed for PCs) can be used with your beige, but (as Jan wrote) you'll need to find a Mac modem cable (DB-25 to mini-DIN8) for it. Additionally, a custom INIT string must be used to disable a couple of unsupported v.92 features, in order for it to function properly. After much trial and error, I arrived at one that did the trick.

  • Dial-up modem with an iMac

    I am running OSX 10.6.8 (Snow Leopard) on an iMac (2.8 GHz Intel Core 2 Duo, 2 GB 800 Mhz DDR2 SDRAM).
    I have had a DSL connection since purchasing this computer, but when I moved my current phone line is only rated for 768 Kbps download speed, which is dial-up speed. My internet provider has finally gotten the phone company to admit to this and has recommended I downgrade to dial-up since I am in fact operating at a maximum of 610Kbps anyhow. 
    They would provide me with an external modem which would connect to the computer using a telephone line with phone-style plug on the modem side and a USB2 at the computer, a specialty product they state that Apple would sell me.  Currently, I use an Ethernet line from the DSL modem to the computer. 
    My question is:  Can my iMac even use a dial-up connection with an external modem?  If so, does Apple in fact sell such a specialty line or does the connection have to be made through an Ethernet line due to hardware/software constraints? 
    There is no wireless or satellite option where I live due to building interference.  The building itself is wired for cable, which I do not care to have.  I am willing to simply downgrade to the lowest speed DSL if dial-up is not possible with my iMac.
    Thanks for information relevant to making my decision. 

    @Lanny, you are correct; the maximum speed of 768k was cited by a support tech and may refer to the phone line's native capacity due to distance.  I have decided to downgrade to the lowest DSL option available to me (1.5 Mbps instead of 3.0 Mbps) and retain the capability of having simultaneous phone and internet access, which is not available with dial-up.  My maximum download speed at my current location hovers around 600K. 
    The source of the difficulty, I suspect, is that the phone company is converting to optical fibers from copper fibers and is pushing their own "blazingly fast" internet product based on fiber optics, rather than DSL with its expensive paired copper lines.  I don't know if the phone company has an additional a means of limiting transmission speeds to thwart their competition, although if I can conceive of this possibility, someone else smarter than me had probably figured out a way to accomplish this 5-10 years ago.  My ISP is gradually building their own fiber optic network to gain independence from the dominant telephone line owner. 
    Thanks for your reply.  It confirmed my intuition to stick with DSL but at the lowest available speed option.

Maybe you are looking for