Help! N95 Button

hi there,
im having a problem with my right nav button on my N95. It's like the button is stuck even when it hasnt been pressed but at other times when its not acting like its stuck down and i press it nothing will happen.
when the button is not acting like its being pressed and if i press the left nav button, the right nav button will start like its being pushed down again.
I've tried to explain as best as i can. What can i do to fix this?

Sounds like a hardware problem. Unfortunately we cannot help you with hardware problems. We can only help with settings and software related issues. You should get it checked out at your local Nokia Care Point.
 You can find your nearest Nokia Care Point at:
For UK
http://www.nokia.co.uk/A4228006
For Europe:
http://europe.nokia.com/A4388379
For Asia-Pacific
http://www.nokia-asia.com/A4416070
Elsewhere:
http://www.nokia.com select your country, go to the support section, then select repair. 

Similar Messages

  • How to call elem. Search help on Button click event in WD appilcation

    Hello All,
    i have requirement to call elem. search help on button click event in WD application. currently i am calling FM  F4IF_START_VALUE_REQUEST but getting the short dump as below,
    The following error text was processed in the system X31 : Screen output without connection to user.
    The error occurred on the application server saps_X31_31 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    SYSTEM-EXIT of program SAPLSDH4
    Function: F4_PRESEL_WITH_TABSTRIP of program SAPLSDH4
    Form: F4PROZ_STEP_PRESEL of program SAPLSDSD
    Function: DD_SHLP_SINGLE_STEP of program SAPLSDSD
    Form: F4PROZ_LOOP of program SAPLSDSD
    Form: F4PROZ of program SAPLSDSD
    Function: F4IF_START_VALUE_REQUEST of program SAPLSDHI
    Method: ONACTIONSEARCH_CUSTOMER of program /1BCWDY/50TU5ZEXF3K0IWCWE153==CP
    Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/50TU5ZEXF3K0IWCWE153==CP
    Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
    is there any way to achieve the required behaviour.
    please let me know.
    Regards,
    Chandra

    Hi Friends,
    I have the similar kind of requirement. Upon click on a Button on screen i need to call a search help, and collect one or more selected material numbers.
    The search help is working fine and i am getting the entries with the following code.
    The problem is i am finding extra popup on screen.
    CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
    EXPORTING
    tabname         =  space
    fieldname       =  space
    SEARCHHELP      =  'MAT1'
    MULTIPLE_CHOICE =  'X'
    STEPL           =  0
    value           = 'MATNR'
    *dynpprog        =  progname
    *dynpnr          =  dynnum
    *dynprofield     = 'CARRIER'
    CALLBACK_PROGRAM          = 'ZTEST_1_PRA'
    CALLBACK_FORM             = 'F4CALLBACK'
    TABLES
    RETURN_TAB                = RETURN_TAB
    EXCEPTIONS
    FIELD_NOT_FOUND           = 1
    NO_HELP_FOR_FIELD         = 2
    INCONSISTENT_HELP         = 3
    NO_VALUES_FOUND           = 4
    OTHERS                    = 5.

  • Help with buttons :S

    hi all,
    i'm new to flash but i have an idea whats going on with webpages. I need some help with buttons! i have a website and its has a stage and 9 different flv's (screens). I've been trying to read online and i can't find out how to navigate to different screens, example below
    home          |            |
    about us     |  stage   |
    contact       |            |
    you click one one button it updates the stage. also i'm using actionscript 2.0.
    thanks for any help ahead of time
    Thank you,

    Is it a wi-fi or cellular connection that isn't working?  If its wi-fi and other people/computers/phones can connect check your settings.  If its cellular, are other people's phones (on the same carrier) working in the same location? If other people can't connect then it is likely a network problem.  If others can you may need to reset/restore you iPhone.

  • Need help about button

    Hi everybody!
    I'm from Italy, so I need help regarding button
    I create an animation, I put a button to replay the movie by this code:
    on (release) {
    gotoAndPlay(1);
    but in AS3 doesn't work. Can you help me pls?
    Another problem...I need a very simple preloader that display only percentage, stop.
    Anybody knows a template or tutorial about this?
    Thx in advance!

    What do you mean by scene2?. You can only preload external content like a picture, another swf, etc...a much simpler example:
    var myLoader:Loader = new Loader();
    addChildAt(myLoader,0)
    myLoader.load(new URLRequest("http://www.snowman-jim.org/science/images/north-pole-sun-moon.jpg"))
    myLoader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, loading)
    myLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, finishLoading)
    function loading(e:ProgressEvent):void{
        info_txt.text="Loading.."Math.floor(e.currentTarget.bytesLoaded/1024)" Kb";//e.currentTarget is referring to myLoader.contentLoaderInfo
    function finalizado(e:Event):void{
        info_txt.text="I'm done!";
    Just change myLoader.load(new URLRequest("http://www.snowman-jim.org/science/images/north-pole-sun-moon.jpg")) path for the relevant path to the file you want to preload.

  • Help N95 phone not working

    I purchased a N95 a couple of weeks ago and really love the phone, but today after charging it nothing worked. pressed buttons and nothing happened. Switched off phone and turned back on and was asked to enter my pin (which is normal) but as soon as I pressed 1 button the phone starts beeping and am unable to do anything except turn it off. I also tried to switch it off and on with memory card removed but still no good. Has anyone come accross this problem before?
    Thanks.

    I´m not familiar with that particular problem, but still I might be able to help you.
    When you turn the phone on and it requests the PIN, try to connect it to the computer via USB and update your phone using the NSU:
    Nokia Software Updater
    All you need for this is a internet connection and a data cable for your phone!
    If that doesn´t work, you´re going to have to head to a Nokia Care Point to have this problem solved. There may be a small charge for this service, depending on country and warranty regulations.
    Care points/service centers and repair info:
    UK • Europe • Asia-Pacific • USA •
    Canada • Middle East and Africa
    Any other country: Click here, select your country, go to the support section, then select repair.
    By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
    The day we stop improving is the day we stop being good.

  • Help with buttons in photo gallery

    Hello all
    I am trying to find a more effeicent way to place buttons on each of my pages (Photo Gallery SIte). I have 150 pages and constantly have to link each button to the "next" or "last" button. Is there a more efficent way to for me to ad butons to each page.My site is Blazinginterest.com
    Please give me some feedback on my site, possibly add a picture viewer?
    Thank you, HD

    what code do you already have? Maybe we can help you modify
    it where it's not working.
    Also, how do you have it currently laid out? eg. do you have
    several images on the screen, but some method to scroll through
    other images? Have you done a search here or on director-online.com
    (in the forum or articles section) on similar questions? Do you
    have something written up to describe what features you need such
    as a design document?
    Just trying to get a sense of your level of programming in
    general, experience with Director and what planning/details you
    have worked out so far because there are so many different ways to
    program a gallery.

  • Help With  "Buttons"  To Fade In On "Play First Title Menu"

    Hi All
    Thank you all for your help! I got my video to work finally on a DVD player in SD. I am now trying to have my menu buttons fade in on an imported video file from Motion. I need to find out how I can have the buttons fade in "disolve fade" after my text plays on the opening of my video. The buttons play right away, and I need to delay their entry on the main menu, say 3-5 seconds before the menu movie starts, Any Ideas? Thank You all for your help on here! Tim C.

    Set the loop point to the time when the buttons are fully faded in
    http://dvdstepbystep.com/motion.php
    http://dvdstepbystep.com/useelements.php (step 12 on)
    http://discussions.apple.com/thread.jspa?messageID=3552197&#3552197
    http://discussions.apple.com/thread.jspa?messageID=3949547&#3949547
    http://discussions.apple.com/thread.jspa?messageID=3832336&#3832336

  • Need help with buttons in applet

    stupid question maybe but i'm a beginner, and hey..there are no stupid questions, right? well, i may prove that wrong...anyway...
    I can't relocate a button, or any other component for that matter. When I try to make a simple applet with just one button showing, then it works perfect...but when I make the applet a little bigger with some graphcis and text, the setLocation() and setSize() methods don't work. the wierd part is that I don't get an error message, the compiler just ignores those lines...so it seems anyway.
    If anyone can help me I'd be very greatful
    thanx a lot

    Do you know there are 5 layout managers in java. It is probably worth looking through each one and the commands they use.
    The layout is determined by two things:
    1.position Components are added
    2.Layout manager used
    Ive never had to use setLocation() and setSize() as the layouts do it for you:
    1.Flowlayout: which is the default pane. e.g.
    setLayout(new Flowlayout()).
    2.GridLayout: postions panels into rows and columns
    b.GridBagLayout
    3.Borderlayout(NORTH,SOUTH,EAST,WEST and CENTER) postions in applet.
    4.CardLayout(a bit like a slideshow)
    5.Insets() which is used to determine top,bottom,left and right.
    Don't bother about 4 or 5 yet. But definitly have a look at the other 3.
    e.g. setLayout(new BorderLayout());
    add("North", new Button("ok"));
    add("CENTER", new Button("Exit");
    etc..

  • Need help with buttons in a phone simulation

    Hello
    I have built a telephone interface to be used for training in a Call Center.
    I am attempting to allow the user to press on the numberpad to enter passwords and such.
    It is only a simulation and will only work if the user presses the correct buttons.
    I am able to create the simulation when the user presses different buttons such as 1234
    but I need them to press 0000 (zero 4 times)
    I am not sure how to do this...
    I have been playing around with the advanced actions, which has allowed me to accomplish the hide and show actions when the user clicks a button, but wondering if there is a way I can
    have them click the 0 on the dialpad so each time it brings up the next zero
    once its gets to the 4th one, it will advance to the next slide...
    Hope that makes sense
    I appreciate any help or advice
    thanks
    Melissa

    Hi there,
    What I did, I took a variable 'counter123' and assign '0' value to this variable.
    I then added a button with Advanced action, I am sharing the Screenshot of the advanced action panel.
    Screen shot 1 :
    Incrementing the Value on click :
    The value of the variable should increase on every click, so lets add a true statement as a condition.
    Screenshot no 2 :
    As normally on buttons/click boxes, the project will continue as soon we click them.
    lets compare the value of our variable and then pause the project.
    Screen shot 3 :
    last if our purpose is solved, here we have clicked the button 4 times, so that has updated the value of our counter to 4, so as soon as the counter exceeds the value, we want the project to continue.
    please let me know if this helps you.
    This will help you in pressing a button 4 times, and i think you can also add actions to show and hide 'zeros' in your project.
    I find such scenarios very interesting and I always find help on Lilybiri's Blog : http://lilybiri.posterous.com/
    Thanks

  • NEED HELP WITH BUTTONS IN AS3!!

    Hello, I am stumped with an action scripting problem. I'm
    trying to create a really basic website in flash using buttons to
    jump from scene to scene. Let's say I want to do something as
    simple as make scene 1 jump to scene two right? I'll place in my
    scene 2 button on my first page:
    But instead of the scene changing to the next scene after I
    press the button, these errors come up!!
    1180: Call to a possibly undefined method on.
    1120: Access of undefined property release.
    1120: Access of undefined property _root.
    I've tried asking in so many different forums, I usually do
    pretty good with action scripting for buttons. But this is my first
    time doing it with cs3. I'm utterly confused, someone please help!!
    Thank you.
    The code on this page is the code I was using to try to
    change scenes...Oh! and whenever I try to put a code in the actual
    button, it won't let me. I just get a message that says something
    like "Can't have any actions applied to it".

    foxxpop,
    > But instead of the scene changing to the next scene
    > after I press the button, these errors come up!!
    >
    > 1180: Call to a possibly undefined method on.
    > 1120: Access of undefined property release.
    > 1120: Access of undefined property _root.
    You're using three terms that aren't supported in
    ActionScript 3.0: the
    on() function, the release parameter to that function, and
    _root. In
    ActionScript 3.0, you'll have to give your button an instance
    name and wire
    it up like this:
    http://www.quip.net/blog/2007/flash/making-buttons-work-in-flash-cs3
    In that blog entry, you'll see (with explanation) something
    that looks
    like this:
    myButton.addEventListener(
    MouseEvent.CLICK,
    function(evt:MouseEvent):void {
    trace("I've been clicked!");
    Just bear in mind that you can also make that a named
    function, like
    this:
    myButton.addEventListener(MouseEvent.CLICK, clickHandler);
    function clickHandler(evt:MouseEvent):void {
    trace("I've been clicked!");
    > I've tried asking in so many different forums, I usually
    do
    > pretty good with action scripting for buttons. But this
    is
    > my first time doing it with cs3.
    Your issue isn't Flash CS3, it's that your FLA file is
    configured for
    ActionScript 3.0. If you change that to AS2, you can go right
    on using the
    same approach you used to -- and you'll be able to attach
    code directly to
    objects. ;)
    David Stiller
    Co-author, The ActionScript 3.0 Quick Reference Guide
    http://tinyurl.com/2s28a5
    "Luck is the residue of good design."

  • Help with buttons in AS3

    Hi Folks,
    I'm stuck with a simple flash movie I need to create in which two images fade in and fade out, and each of them must be clickable and hyperlink to a separate URL.
    I've got the fading going okay, but I cannot for the life of me get even a single button to work on it.
    If it's helpful I can send along what I've got so far.  Any assistance would be greatly appreciated.
    Regards,
    Andrew.

    Hi Ned,
    Thank you for the followup email.
    I think I was close - I was aware of the changes between AS2 and AS3, but I
    think I was putting the Action in the wrong place.
    Next question - if I have 2 buttons (say btn1 and btn2), how do I make btn1
    available for say frames 1-60, and btn2 available from frames 61-120?
    I am primarily a ColdFusion developer, and a complete newbie to flash, so
    sorry if this is a dumb question.
    Regards,
    Andrew.
    2009/5/15 Ned Murphy <[email protected]>
    In AS3, to make a button work with code, you need to add an event listener
    for it.  In the timeline that holds that button, in a separate actions layer
    that you create, in a frame numbered the same as where that button exists,
    you would add the event listener:
    >
    btn1.addEventListener(MouseEvent.CLICK, btn1Click);
    >
    Descriptively, that line of code contains the following:
    >
    buttonInstanceName . displayObjectMethod (eventClass . eventType,
    eventHandlerFunction);
    >
    The name of the function for processing the clicking of that button was
    already defined at the end of the event listener assignment, so now you just
    have to write that function out:
    >
    function btn1Click(evt:MouseEvent):void {
       var /String = "http://www.awebsite.com/awebpage.html";
       var req:URLRequest = new URLRequest(url);
       navigateToURL(req);
    >

  • Help with Buttons in Actionscript 2

    Help!! I am creating a Flash movie with 5 scenes. I have
    buttons for each that I have added actionscript to, but they still
    do not work. I am not getting any error messages. I am using
    actionscript 2 and have gone step by step. here is what i have :
    on (release) {
    gotoAndStop("main", 1);
    on (release) {
    gotoAndStop("blackboard", 1);
    etc for the rest of the buttons. Any help would save me much
    stress as I am trying to finish a project for school!!! thanks
    ah

    Try adding _root. before the gotoAndStop command. If you have
    the code on the buttons that is.

  • Help with buttons/actionscript

    I've got a movieclip acting as a button.  Code on the button itself handles roll-over/-out states, and I define an onRelease function in the main timeline as follows:
    backBut.onRelease=function(){
         gotoAndPlay(1);
    This code takes the movie back to the first frame and works on the third frame.  For some reason, though, the same code on the fifth frame has no effect.  The button doesn't do anything.  I have tried using the same button, I tried inserting a new keyframe with a new button, renaming the button, etc. and for some reason I just can't get it to work on the fifth frame.
    If it helps to visualize, I am essentially making a menu.  The first frame contains buttons to take you to submenus, located on following slides.  This button to go back to the original menu is on each frame with a submenu, but for some reason only works on one of them.  Thanks in advance for your help.

    Try moving that button in frame 5 to it's own layer.  If it's the same llibrary symbol, what happens is the name from the preceding instance gets inherited, along with other characteristics.  If frame 4 doesn't do anything, instead of a new layer, just try putting a blank keyframe between the buttons in frames 3 and 5.  This may not be the problem at all, but it's my first guess at the possible problem.

  • Logical Database - PNPCE - Hide 'Org Structure' 'Search Help' etc buttons

    Hi,
    We have created a report by making a z copy of RCATS_APPROVE_ACTIVITIES. In the Z version we need to hide the buttons on the titlebar of the selection screen.
    Buttons are
    - Org Structure
    - Search Help
    - Dynamic Selection
    - Selection Fields.
    Can you please suggest if I can do something from the code ?
    Regards,
    Chiranjeevi.

    Hi,
    Thanks for your suggestion. However, there is no title bar method that we can modify to remove the buttons. I have created a Z report Category by copying the existing one and made the modifications.
    In that we can hide/display UI elements which are displayed by Logical Database.
    Regards,
    Chiranjeevi.

  • How to remove the help link button on EP7.0?

    We have a need to remove (or hide)  the "help" button on EP7.0.
    We have tried different ways but no success.
    Would you please help?  Thanks a lot!

    Thanks!
    Do you have a way to hide/remove the help button on the ITS which renders SAP transaction?
    May I explain more:
    We use ITS to access some R/3 t-codes.
    Some R3 transactions have a "help" button which is not wanted or desired.
    Could you tell how to remove or hide it?
    Thanks!

Maybe you are looking for