Help! Need a good laptop for school and editing. Budget is around $800 (Canadian).

I'm looking for a laptop for around $800 Canadian, I'm starting a science and technology program in high school so I will need decent graphics performance for editing and 3D modelling. My budget is a bit flexible but only by around $100 for a significantly better product. I've had my eye on the Lenovo y40-80 but some people say it's great and other call it a dissapointment. I was thinking about either ASUS, Lenovo, or MSI. Any suggestions would be helpful, Thanks.

I own an ASUS and a MSI laptop. A little advice for you.... Visit the store and see if you can play a YouTube video.one laptop display appears dimmer and not so brightthe other laptop does a very poor job of rendering colors (especially with skin)Can't say this is a problem with today's newer machines. But it was something that has troubled me.

Similar Messages

Help need my mac pro for school..it has Grey screen..spinning wheel...repaid disk ok...repair disk permission all repaired but one warning...

Help need my mac pro for school..it has Grey screen..spinning wheel...
I think I have mountain lion OS X....I have done I think almost every suggestion I've seen in discussion boards.
Boot in recovery repaired disk...ok...repair disk permission...all repaired but one warning...I've tried to reinstall lion (without losing data) and it Got all the way to one minute to be done and then the time change back two hours and kept doing this all night long. I haven't done a back up due to no external for time machine.
I hope someone can please help me I've been going crazy for a week now trying to figure this out. I use my computer for school and I'm currently very behind from in my school work thank you
Also I've checked my available space 424.91 free of 750 gigs....disk is verified

Welcome to the Apple Support Communities
Try holding the Shift key while your Mac is starting to start into safe mode. Then, after starting in safe mode, open Finder, select Go menu (on the menu bar) > Go to Folder, and type /Library/StartupItems. Then, empty this folder and restart the Mac.
If your Mac starts after doing this, it was a problem with a third-party app that starts automatically when you turn on the computer. It won't start automatically anymore after doing that

ICan't ReInstall my computer please help. need to use Mac for school next week

I use my Mac for School and stuff happened.
Long story short.
1) I tried to reset my Mac Book Pro computer and I did.( by pressing option key and go to disk utility and erase tab and erase)
2) then I know I was supposed to go to Reinstall OS X Lion and I did but I quit. (took 10 hrs and plus my internet is bad and couldn't DL the other stuff)
3) I remembered that I had a recovery disk. so I inserted it and I went to the disk utility, dragged the Macintosh HD to the restore tab, destination, and it copied my recovery disk data? to my Machintosh HD and the name of it changed to Mac OS X Base System ( the name of my recovery disk)
4) and I tried to restart, shut down my computer, it sends me to the same Mac OS Utilities. Again.
5) so I went to Reinstall Mac OS Lion, agreed, and the download destination usually should be the Macintosh HD ( for me its Mac OS X Base System right now) but it said it is locked (because I'm dumb) and i can't install it now.
6) i don't know what to do now because this is not my computer that I'm sending this support from. and I can't use my original Mac Book. what should I do?
AND I NEED TO USE THE MAC NEXT WEEK FOR SCHOOL.
more info: MacBook Pro 13 inch Late 2011 ( got it for christmas)
OS 10.7.5 ( recovery disk is 10.7.2)
had no problems for 2 years.
Why is Internet bad? Japan. thats why.
For those who wonder why I wanted to reset/restore my MacBook Pro or, want to hear the long story:
I play League of Legends, Steam, Osu! on my Mac and it took alot of capacity (or space).
And League of Legends has thisthing called "Item sets" that when you save it, it doesnt save it in the client (or app), it saves the "item sets" data in your computer (took alot of capacity/space)
Not just that, and I had iPhoto but when i downloaded iLife to my mac, and after that, it said my iPhoto is damaged and it can't open.
And summer ended, my parents said If I fail my 11th grade, they are going to kick me out so I told them I'm going to reset my Mac to factory settings and get a fresh start, well this happened.

hi there! I got it back to work by buying the USB version of Mac OS X Lion 10.7
and since my internet connections are kinda bad, I'm not able to download and update it to 10.7.5.
but anyways I got it back to work.
All I can say is I suggest you to buy the USB version of Mac OS X Lion 10.7 from amazon or apple store.

I need 3.6.19 for school and have 6.o beta what do I do

I have the current beta's for firefox, and Aurora, BUT my school that is online only does 3.6.19 and it doesn't work correctly with their version, how do I put another firefox of their type on my computer and still retain 6.0 and Aurora?

http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

My Firefox keeps freezing up, unfreezing after a minute or so. This has gotten very tedious and I've no idea what's causing it. I'm at wit's end here, I need a good browser for work and at home. (Note: IE isn't freezing up)

Firefox freezes up whether I've one tab open or five open. I've got plenty of RAM on this laptop, that's not the problem. Firefox worked perfectly until a month or so ago and I didn't do anything different then.

-> Tap '''ALT''' key or press '''F10''' to show the Menu Bar
-> go to Help Menu -> select '''Restart with Add-ons Disabled'''
Firefox will close then it will open up with just basic Firefox. Now do this:
-> Update Firefox to the latest version by going to Help Menu -> About Firefox -> click '''Check for Updates''' -> if an updated version is found then download the latest version and install it. After that follow these steps:
-> Update ALL your Firefox Plug-ins https://www.mozilla.com/en-US/plugincheck/
-> go to View Menu -> '''Zoom''' -> click '''Reset''' -> '''Page Style''' -> select '''Basic Page Style'''
-> go to View Menu -> Toolbars -> unselect All Unwanted/Incompatible Toolbars
-> go to Tools Menu -> Clear Recent History -> '''Time range to clear: select "EVERYTHING"''' -> click Details (small arrow) button -> place Checkmarks on '''Cookies, Cache''' -> click '''Clear Now'''
-> go to Tools Menu -> Options -> General -> in '''Startup''' section click '''Reset to Default''' button
-> go to Tools Menu -> Options -> Content -> place Checkmarks on:
1) Block Pop-up windows 2) Load images automatically 3) Enable JavaScript
-> go to Tools Menu -> Options -> Privacy -> History section -> '''Firefox will: select "Remember History"'''
-> go to Tools Menu -> Options -> Security -> place Checkmarks on:
1) Warn me when sites try to install add-ons 2) Block reported attack sites 3) Block reported web forgeries 4) Remember Passwords for sites
-> go to Tools Menu -> Options -> Advanced -> Network -> Offline Storage (Cache): click '''Clear Now''' button
-> Click OK on Options window
-> click the Favicon on SearchBar -> click '''Manage Search Engines''' -> select all Unwanted Search Engines and click '''Remove''' -> click OK
-> go to Tools Menu -> Add-ons -> Extensions section -> REMOVE All Unwanted/Suspicious/Incompatible Extensions (Add-ons)
-> go to Tools Menu -> Add-ons -> Appearance section -> REMOVE All Unwanted/Suspicious/Incompatible Themes (Persona)
-> Restart Firefox
You can enable your Known & Trustworthy Add-ons and Themes later. Check and tell if its working.

Good laptop for Photoshop and Illustrator?

I often work in photoshop and illustrator and am looking for a laptop that can run these reasonably well with the lowest cost. Any recommendations?

You should look at one of the gaming laptops.
They will intrinsicly work better as they should have a decidaed GPU instead of integrated graphics.
Now granted, I used to run CS2 on a Dell Laptop with Intel 3000 integrated graphics and it actually ran pretty well with photos taken at RAW and only 4 gb of RAM.
So pretty much any of the gaming laptops I think would run it OK to very outstanding.
It all depends on how intense you plan on getting with photoshop and illustrator.

Help needed by Good Samaritans for info on Drivers for RS232 / USB ports.

Dear all,
I would first like to thank you for taking the time to read my message.
I would like to ask all you proffesional LV developer how difficult it
might be to write the drivers for a bluetooth-RS232(or for a Wireless
LAN ethernet/USB access point) device using LV. Would it be better to
write the drivers in C++?
I have finished the LV Basics 1&2, though we did not learn something helpfull for my case.
Are there any usefull examples i should look at?
The signal transmitted would have a data rate of about 0.5MBbs and the LV program would just display and store the data.
Thanks for your help

Bogiasac
Couple of quick points then I will allow the LV Community to reply to the specifics. From NI's point of view we would recommend that you use the development language that you feel most confident in, so if you are a C++ guru then use C++. Another point, you mention that you attended the LV Basic training classes. I conclude from your comments that you were looking for specific training (while attending did you raise this with instructor at the time?), these training classes are an introduction to the LV environment and set out the ground rules how to best develop a LV application. Our intermediate courses go into greater detail into advanced LV features - though for some this is still not deep enough (future developments in that for LV 8.0 users soon). If you are looking for specific training please contact our Training Co-ordinator in the UK and she will be happy to advice.
On the Bluetooth question, LV has Bluetooth tools built in. These can be found in the Communication palate under Bluetooth (this depends on which version of LV you have, Base or FDS). Please use these VIs to develop you Bluetooth application. There are 9 Bluetooth examples shipped with LV, these can be found by using the “find examples” in the help menu.
Kind regards
Joe
NIUK

Help needed using ITunes Match for Music and freeing up space on IPad?

I have moved my music from IPad to ITunes Match Cloud. I find that it is just copied there and is still on my IPAD. I am trying to free up space on my IPad so do I delete the music on my IPad, or do I delete the music on my IMac and sync to remov

King Penguin's advice is always sound, spot on and he has really give you the best all around solution for what you want to do....but you can also delete your music directly from the iPad and download it again when you want it again. These days, not all people use iTunes with their iPads and many iPad owners dont even own computers. I assume that you do have a computer running iTunes since you asked about iTunes Match, but since you didn't know how ITM works, maybe you don't own a computer, so I'm just offering another alternative.
You can go to Settings>General>Usage>Manage Storage>Music and remove music in there via the Edit button as well as swiping across songs or albums in the music app in order to get the red delete button. If you want to download the music again, just go to the purchased tab of the iTunes app, tap on Music, Not on this iPad and all of your purchased music will appear. You can also go to Settings>iTunes & App Store>Show All Music>on. That will make all of your music in the cloud appear in the music app and you can tap on the cloud icon in order to download the songs again.
The only caveat to this solution is that of the music is no longer available in the iTunes Store, you cannot download it again. On occasion, things do get removed from the iStores, so it is possible that could happen.
Download past purchases

How can I get to the files I need for school and jobs? It only allows me to go to my photos.

I Am having problems getting to my files so I can submit papers for school and to send in resumes. It will only let me go to my pictures it will not let me go to my files I need.

What are you talking about? What will only let you go to your pictures? Where are the files stored? What app are you attempting to access them with? And what does this have to do with AppleWorks, which has been discontinued for years?

HT4796 will turbotax transfer from my broken hp laptop to a new mac or do I need to buy turbotax for mac and start over with my pc 2011 turbotax file

will turbotax transfer from my broken hp laptop to a new mac or do I need to buy turbotax for mac and start over with my pc 2011 turbotax file

You'd have to ask Intuit. They might give you a cross-license to download and install the Mac version.

One of my sons has an ipad mini and the other a larger ipad. The one using the mini needs a larger ipad for school, so they need to switch. They want to do so without losing their individual app progress. Can I simply switch the SIM cards?

One of my sons has an ipad mini and the other a larger ipad. The one using the mini needs a larger ipad for school, so they need to switch. They want to do so without losing their individual app progress. Can I simply switch the SIM cards?

SIM card has nothing to do with your Apple ID or apps.
IOS devices do not store anything on the SIM card.
BAckup everything on the iPads.
REstore tbe ipad from the backup of the other iPad.
REpeat for the other one.

If I buy creative cloud student plan, can I use the software on multiple computers. I have 2 laptops for school.

If I buy creative cloud student plan, can I use the software on multiple computers. I have 2 laptops for school.

Creative Cloud Help | Creative Cloud / Common Questions
Can I use the software I download from Creative Cloud on more than one machine?
Yes. Creative Cloud desktop applications can be downloaded and installed on multiple computers, regardless of operating system. However, activation is limited to two machines per individual associated with the membership. See the terms of use for more information. Learn how to deactivate a Creative Cloud license on a machine.

Hi all ,i need a good documentation for a beginner in WORK FLOW ?

hi all ,
i need a good documentation for a beginner in WORK FLOW ?
please,try to send the attached documents as much as u can apart from giving the weblinks ?
hope you will send it soon ....
thanks & regards
vishnuvardhan k.v.

Hi
Developing a simple application using steps "User Decision" and "Mail"
Basic terminology used in the workflow:
The workflow definition is the set of rules that determine the path that the process takes. For example, how a purchase requisition is processed, from the initial request to the creation of the purchase order
A Workflow Instance, which is often simply referred to as the workflow, is a single workflow run. For example, the processing of a single purchase requisition for computers.
The Tasks are the steps in the process, which have to be performed either by people or automatically by the software. For example, to check for the availability of the spare computers in the company.
A Work item is the task instance that is performed as a single workflow step. For example, check that there are no spare computers available in the company.
Agents are the people who process the tasks (via the work items). For example, requisitioner and a member of the purchasing department.
Container is the place where all the data used in the workflow is collected.
Binding is the set of rules that define which data is passed to which part of the process.
Building a simple workflow application
The central tool for creating, displaying and processing a workflow is the workflow builder (Transaction SWDD). Within the workflow builder you can create all components of a workflow, including all the containers you need for getting the data from one step to another.
Generally, most of the workflows are started by an event (for example, when a material is created or when a new purchase requisition arrives). You define which data from this event needs to be passed to the workflow via binding.
However you can also start any workflow directly. Let us create a simple workflow and start the workflow directly, using the testing tools.
Call transaction SWDD. When the workflow builder is called for the first time, a newly created initial workflow definition appears or else last created workflow appears. In such cases you can opt to create a new workflow by pressing Create New Workflow(ctrl + shft + F5). The following screen appears.
The initial workflow screen has the following parts:
a. The start of the workflow definition, indicated by .
b. The end of the workflow definition, indicated by .
c. The area in which you insert the new workflow definition is indicated by .
Now select the undefined step and select Create step or double click the undefined step. Now among the different steps chose the User Decision by double clicking on it.
Developing a simple application using steps "User Decision" and "Mail"
Previous
Now enter the title for the user decision Please make a decision. Also enter the decision texts as Approve and Reject. On pressing enter, the outcome values default to the Decision texts but you can specify your own names, if desired. Now we need to select the agent. Agent is the person to whom the work item needs to be sent.. Since this is just a beginning, we would hardcode the user name. Select the User from the drop down list and enter the user name to whom the work item needs to be sent. In general, this type of agent assignment is not done. Agents are generally assigned using the expression, agent assignment rule or organization object (job, position etc.).
Now select Transfer and to graphic button. Following screen appears:
Now we need to include a mail step to be sent to the requestor. Now select the line Approve and do a right click. Different options on shown on the context menu. Select Create.
Now select the step Send Mail from the list.
Developing a simple application using steps "User Decision" and "Mail"
...Previous
Now enter the subject and the body of the message for the mail to be sent.
Do not change the recipients. Our mail is intended for the persons who triggered this workflow. &_WF_INITIATOR& contains the value who executed the workflow. Since this is a test object, we are using &_WF_INITIATOR&. But we wouldnt be using this variable in real time scenarios. We would discuss about this in the coming documents.
Now select Transfer and to graphic button.
A popup appears requesting for the abbreviation and the name for this task. Enter the same and press enter.
Now enter the package as local object and press enter.
Follow the steps 5 through 9 for the step Reject. The following screen appears:
Press SAVE to save the workflow application. You need to enter an abbreviation and name for your workflow as shown below. You can change any of these at any later point. After saving, a number is assigned to your workflow starting with WS, as shown below.
Developing a simple application using steps "User Decision" and "Mail"
...Previous
To execute the workflow, activate it by choosing the activate button.
Test the workflow by choosing Test. The following screen appears.
Now choose Execute to start the workflow.
Now the recipient would receive a work item in his SAP® inbox (Transaction SBWP).
Now execute the work item by pressing Execute. The following screen appears:
Choose one among Approve or Reject as part of the user decision. He can select the third option to retain the work item in his inbox and make the decision later. Now suppose that the recipient has chosen one of the first options. Now a mail would be sent to the requestor with the status of his request.
Creating a Container element
This document details about creation of a container element in workflow and using it in the step "Mail".
Pre-requisites:
It is assumed that the reader of this Tutorial is aware of creating a workflow definition with the step Mail. If not, please go through the document on creating the same available, by clicking here.
Steps:
1. Create a workflow definition using the transaction SWDD.
2. Lets create a container element for Carrier id. Click on the Workflow Container on the left side of the screen (as shown in the screenshot below):
3. Now double-click on Double-Click to Create
4. Enter the details pertaining to CARRID here.
5. Click on tab Properties and select Import.
6. Click on Confirm (Enter).
7. Now the element created could be seen on the left side, below the Workflow Container.
Creating a Container element
Previous
1. Create a Mail step by double-clicking on Undefined step in the workflow.
2. Enter the recipient details in the Recipients box.
3. In the subject line, enter Carrid value entered is: and click on Insert Expression.
4. Select the element Carrid from the list.
5. Similarly enter the content in the Body area.
6. Save and activate the application.
Testing the Workflow application:
7. Test the workflow by clicking F8.
8. Enter the value of the Carrid as shown above and press execute.
9. A mail would be sent to the recipient mentioned earlier with the carrid value entered.
Condition Step
Agenda:
This document details about the steps Condition.
Pre-requisites: It is assumed that the reader of this document has a preliminary understanding of workflow and has worked with the container elements earlier. If not, please go through the first two Tutorials of workflow available in this site. (More details)
Procedure:
1. Create a new workflow definition.
2. Create a container element, CARRID (as demonstrated in tutorial 2).
3. Now click on undefined step and create the step Condition.
4. Enter the step name of your choice.
5. We would have the following condition here:
If carrid = AA.
Do this.
Else.
Do this.
Click on Click here to create a new condition. Following screen appears.
Double click on Carrid. Next click on = and enter the value AA in the constant field and press ENTER.
Enter the outcome names of your choice as shown above.
Click on Transfer and go to graphic.
As shown above, there are two branches here. One navigates to true, if CARRID = AA else the control takes the branch False.
Test the above scenario by inserting mail steps in the above 2 branches and by passing different CARRID values.
Condition Step
Agenda:
This document details about the steps Multiple Condition.
Pre-requisites: It is assumed that the reader of this document has a preliminary understanding of workflow and has worked with the container elements earlier. If not, please go through the first two Tutorials of workflow available in this site. (More details)
Procedure:
1. Create a new workflow definition.
2. Create a container element, CARRID (as demonstrated in tutorial 2).
3. Now click on undefined step and create the step Multiple Condition.
4. Enter the step name of your choice.
5. We would have the following condition here:
If carrid = AA.
Do this.
Elseif carrid = AH
DO this.
Elseif carrid = SQ
Do this.
Else.
Do this.
Select the CARRID using the F4 help for the comparison basis field.
Enter the values of the carrid under the Comparison values with the corresponding outcome name (of your choice)
Double click on Carrid. Next click on = and enter the value AA in the constant field and press ENTER.
Click on Transfer and go to graphic.
As observed above, there are different branches for each value of CARRID mentioned above.
Test the above scenario by inserting mail steps in all the branches and by passing different CARRID values.
Using "Container Operation" step
Agenda: Usage of step Container Operation.
Pre-requisites: It is assumed that the reader of this tutorial has worked in the concepts that are dealt in earlier tutorials. (click here for more details)
Scenario: In this tutorial, we would deal about how to work with the step Container Operation with an example of calculating the available seats by subtracting occupied seats from the maximum seats at the workflow level.
Procedure:
1. Create a new workflow definition using the transaction SWDD.
2. Create two container elements MaxSeats, Occ_Seats with the import property set. You can use the reference fields sflight-seatsmax, sflight-seatsocc for this.
3. Create another container element AvailableSeats without setting either import or export property as this is calculated within the workflow and used within the workflow. You might use any of the above reference fields as data types.
4. Define a new step Container Operation in the workflow definition by double-clicking on the Undefined step.
5. In this step, we would calculate the available seats from the max seats and seats occupied.
I would recommend entering all the container elements from the F4 help instead of typing them manually.
6. Return to the main screen.
7. Create a mail step after this to send the available seats information.
8. Test the above functionality by passing some values to the maximum and the seats occupied.
9. Result would be as follows:
Triggering Events Programmatically
Purpose: This document details the procedure in triggering the business object events programmatically.
Pre-requisites: It is assumed that the reader of this document is aware of the business object concepts and good in ABAP.
Procedure:
In this document, we would take an example of the business object BUS1001006 (Material) and the event CREATED. In general, this event is triggered whenever a material is created using a standard procedure like MM01 or any others. Now we would trigger this event from our own programs.
Following are the screenshots of the business object BUS1001006 and the event CREATED. Go to transaction SWO1 for more information of the business object.
Double-clicking on the key field parameter gives you technical information of the field.
In order to trigger an event programmatically, we would use the function module SWE_EVENT_CREATE.
Following is the sample code to trigger the events programmatically:
REPORT ZDEMO_TRIGGER_EVENT.
DATA: KEY LIKE SWEINSTCOU-OBJKEY.
KEY = '1163'. Material Number (hard-coded)
CALL FUNCTION 'SWE_EVENT_CREATE'
EXPORTING
objtype = 'BUS1001006'
objkey = KEY
event = 'CREATED'
CREATOR = ' '
TAKE_WORKITEM_REQUESTER = ' '
START_WITH_DELAY = ' '
START_RECFB_SYNCHRON = ' '
NO_COMMIT_FOR_QUEUE = ' '
DEBUG_FLAG = ' '
NO_LOGGING = ' '
IDENT =
IMPORTING
EVENT_ID =
TABLES
EVENT_CONTAINER =
EXCEPTIONS
OBJTYPE_NOT_FOUND = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
WRITE 'Event Triggered'.
ENDIF.
COMMIT WORK.
In order to test whether the event is getting triggered or not, we can make use of Event Trace. Switch on the event trace using the transaction SWELS.
Press Switch On.
Now execute the program developed earlier. Now switch-off the event trace using the same transaction SWELS.
Now go to transaction SWEL. Here you can list out the events triggered in the particular period of time. Here is the event-trace list:
Deadline Monitoring in SAP Workflow
A major advantage of workflow is the ability to monitor the workflow steps according to a predefined schedule. Following are different deadlines that can be monitored against each workflow step:
Requested Start
Latest Start
Requested End
Latest End
In this example, we will define a deadline to the User Decision example created earlier (click here). Following is the screenshot of the application developed using the User Decision example:
We would extend this example to the deadline monitoring.
In the User Decision step, click on the latest end tab.
By default, No deadline monitoring is active (as seen in the above screenshot).
Choose the Work Item Creation from the list box.
After selecting Work Item Creation, chose an offset of 5 minutes. This means that the work item must be executed within 5 minutes of the creation, if not this would trigger.
Deadline Monitoring in SAP Workflow
Enter recipient details to whom the message to be escalated, if the work item is not executed with in 5 minutes after work item creation.
Save and activate the workflow definition.
Testing the workflow application:
Execute your workflow.
Check for the work item in the SAP Inbox. This time do NOT execute the work item.
Wait for the deadline to be triggered. After that, a deadline message is delivered to the recipient mentioned in the Latest End tab. See the screenshot below.
Dont worry if the deadline message doesnt appear immediately after 5 minutes. This depends on various factors including how the deadline monitoring program is scheduled and also on the availability of the background processors.
Use SWWA to check how the deadline monitoring program is scheduled in program.
For example, assume that our work item has been created at 09:10 hrs and the deadline message is expected to trigger at 09:15 hrs. From the above screenshot, it is understood that the background program is scheduled to execute for every 3 minutes. Assume that the last run of the program is at 09:14hrs and the next run is expected at 09:17hrs. So even our deadline expires at 09:15, the deadline message would appear only at 09:17hrs after execution of the background program.
Some more points
In our above example, we have used the deadline on the Work Item creation time. i.e., 5 minutes after creation time, the deadline message would be sent. Now we would check the other option Expression. Here we can mention the date and time, when the deadline message should appear irrespective of the work item creation date/time.
As seen in the above screenshot, we can provide the target date and time by which the task should be finished. Container elements could be used in this case. Please refer to our example on creation of container elements (click here).
Personal Substitute in Workflow
Requirement: Need to have at least one substitute who can act upon work items in your absence.
Important: The appointed substitute would be able to see all your work items. A substitute cannot be assigned for only particular area of organization or any other item. So need to ensure that the substitute have the necessary authorizations to act upon the work items.
Procedure:
1. Go to SAP Business Work Place (TCode: SBWP)
2. Now from the menu bar, select Settings à Workflow settings à Maintain Substitute
3. Highlight/Select the name on the window, in this case SAPDEV02 and click on Create Substitute.
4. List of users available in the system are displayed.
5. Select the required substitute user name. Following screen appears.
Validity field describes about the period in which the setting would be active. Note that the dates on the screen would range from the current date to 31st Dec 9999.
Regarding the checkbox Substitution active, it is advised to leave this checkbox unchecked for system performance reasons. A check in this box indicates that the substitution is permanent and if left unchecked it is treated as as-needed. A permanent substitute will automatically receive the primary users work items in their own box. In the case of as-needed, substitute must manually adopt the work items from the primary users inbox.
6. Save the entries
7. Click Enter to leave the screen.
Adopting a Substitute in Workflow
If you have been designated as an as-needed substitute, you must manually adopt the substitution. If you are designated as a permanent substitute, the work items would automatically appear in the inbox.
Before adopting a substitution, there are 19 work items in the inbox. See the screenshot below:
To adopt a substitution, select Settings à Workflow settings à adopt substitution.
Select the corresponding User-id (if you have been assigned as a substitute for multiple people, then this option would allow you to select the user name of whom you would to check the work items)
The corresponding users work items would appear in our inbox now.
You can end the substitution, by selecting settings à Workflow settings à End substitution.
Note: Substitutes can only adopt work items that are directly routed to the person for whom they are a substitute. If you are a substitute for a user (SAPDEV02) who has been made a substitute for another user (SAPDEV01), you will only see work items for user SAPDEV02 and not of the user SAPDEV01.
Notification of Work Items via e-Mail
SAP provides us with a facility of notifying the user via the email address of your choice when there are any pending work items in the SAP Inbox..
1. Go to Transaction SO13.
2. Click on Automatic Forwarding tab.
3. Click on Create icon .
4. Enter the details in the above screen.
5. Click ENTER to complete the entries.
6. Now the notification would be received at the provided email address if there are any pending work items in the inbox.
Filtering the Work Items in the SAP Inbox using BADI
This document details about the procedure in filtering some of the work items from the SAP inbox using a BADi.
Following is the screenshot of the SAP inbox, before implementing BADi:
The BADi that is used in filtering the work items is WF_BWP_SELECT_FILTER. To implement the BADi, go to transaction SE18. From the menu, select Implementation à Create. (See the screenshot below)
Enter the implementation name and press ENTER
Enter any meaningful short text for the implementation and click on the tab Interface
The implementing class, ZCL_IM_BWP_SELECT_FILTER, is automatically proposed. Double click on the implementing class name.
You are now navigated to the class builder. Now double-click on the method name shown on the screen (see the snapshot below)
Now let us filter out the work items belonging to the task TS2000066. See the code below:
Activate the method and also the implementation. In the state of active, you wouldnt be able to make any changes. To make any changes, we need to deactivate it and then make the changes.
Now check the inbox and would notice that the work items related to that task are no more appearing.
To notice the differences, try activating and deactivating the BADi implementation.
Workflow tutorials with step-by-step and with screenshots are available at http://www.****************/Tutorials/Workflow/Workflow.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/42/c14a9b55103116e10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/e4a930453d11d189430000e829fbbd/frameset.htm
http://www.sapgenie.com/workflow/
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
http://www.sap-basis-abap.com/wf/sap-business-workflow.htm
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2857887
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2855919
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2735228
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMSTART/BCBMTWFMSTART.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMDEMO/BCBMTWFMDEMO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMPM/BCBMTWFMPM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
debug a workflow.
This has a step by step procedure :
http://fuller.mit.edu/workflow/debugging.pdf
www.erpgenie.com/sap/workflow/debugging.htm
http://www.erpgenie.com/workflow/debugging.htm?2b5de440

Help, Ive taken a membership for lightroom and photoshop yesterday,buth it doesnt work..

Help
Ive had the trialversion for photoshop and lightroom and took a membership yesterday (12.99€/month).
Everytime i open my creative cloud it says my trialversion is gone and i need to buy a membership.. BUT I DID..:(
Anybody has any idea? I didnt receive a serialnr or so, only an ordernumber..
And i cant find any way to try and reach Adobe customerservice.. There's a number, but its not working..
Thanks
Charlotte

I have EXACTLY the same problem. I'm going out of my mind as I'm going round in circles, installing Creative Cloud, trying open Lightroom, being asked to pay for another membership - and so it goes on. But I paid for a full annual membership, in advance, and so i cannot understand how ADOBE have made this so unimaginably complicated for people to use.
Please do let me know how you solve this problem, if/when you do. I will do the same for you.
Good luck!

Urgent help needed - new to Macs, accidently cut and paste over top of photo folder and now no sign of folder or file, no auto back-up in place, how can I restore photos pls

Urgent help needed - new to Macs, accidently cut and paste over top of photo folder and now no sign of folder or file, no auto back-up in place, how can I restore photos pls

Thanks for prompt reply, yes we have tried that but have now closed down the browser we where the photos were.
We haven't sent up time machine, do you know whether there is any roll-back function on a Mac?
Thanks

Help! Need a good laptop for school and editing. Budget is around $800 (Canadian).

Similar Messages

Maybe you are looking for