HELP ! ... Need DVCAM settings for FCP 5.1

I've filmed on a Sony HDDZ1P in DVCAM mode, inserted the tape into a Sony DSR-1500AP, opened FCP Pro 5.1 & it's not finding the deck. The G5 is recognising it's connected via Firewire but in the "Log & Capture" it can't find it. If I press PLAY ... it starts the deck.
HELP .. I'm tearing my hair out and it's going grayer in the process !!!
Regards,
Andrew

Glad you got it fixed. Still, if you had searched for a moment, you would have discovered yours is a very common problem with a very simple answer - as Jerry suggested in his post. All you really needed to do is reinstall QT using the 'delete receipts' method. Something to remember for the next time it happens.
Oh well, if nothing else, you now have a very clean machine.
good luck.
x

Similar Messages

Need advise on best settings for FCP 7!

I am looking for some advice on the best settings for FCP 7 when I am syncing sound using pluraleyes, exporting into quicktime as one file and then importing that new file into FCP 7 for editing. I have noticed that sometimes my Quicktime files are very large (20 gb) and sometimes they are much smaller (130 MB), but I never changed the settings.
I am working on FCP 7 and shot using my Panasonic GH3 at 24 fps (which comes to 23.98). My frame size is 1920x1080. Compressor is H.264. Data rate: 8.6 MB/sec. Audio rate: 48.0 KHz. I have heard that FCP 7 does not properly deal with H.264. So, I am wondering, what should my settings be? Should I set to "Apple ProRes 422 (HQ) 1920x1080 24p 48 kHz"? Is there anything I need to know when I export to Quicktime 7 Pro in order to not reduce the quality of the video? Should I be changing my video files first before I even start to work on them?
I haven't edited in almost ten years so I am desperate need of some guidance!
Final Cut Pro 7, Mac OS X (10.6.8)

Hi Shane Ross,
Thanks for your help. So, I already synced all of my interviews in FCP 7 (using pluraleyes) before I changed the video to ProRess 422. Can I just go into FCP (in the same project) and compress the video footage, import the new video files and throw it into the timeline? Or will this cause issues? I tried this as a test and it seems to be okay but I just want to check that there aren't any issues that I am not considering.
Also, when I do compress, it seems to take forever (sometimes two hours). Is there any way to make this move along faster?
Thanks so much!

Help with print settings for Panoramas

Hi,
I use an Epson 2880 and I am trying to figure out the print settings for doing an 11 x 34in panorama print on 13" roll paper from Aperture 3.0.3. I finally got it to do one print properly, but the setup was totally counter intuitive and I can't reproduce it. I tried using "Custom" Paper size and setting it to 13" x 36", then using the landscape mode and setting the Image Size to 11 x 34". Any way I did this ended up with the image printing the wrong way on the paper. So I went back and picked "Roll" paper. This leaves only one field to fill in, which I presume is the paper width (it really didn't make this obvious in the dialogue.). Then I set the mode to Portrait, and made sure that the settings for the Image size were 11 x 34. It then printed fine. But when I went back to print another file, even though I had saved the settings, now I am presented with only one box for specifying the Image Size and there is no way to get it right again. HELP! The settings for this kind of print in Photoshop is also counterintuitive, but when you get it set right, and you know the settings, no problem reproducing it. I think maybe there is a bug in AP3 with regard to this sort of setup.

Hey BaByPaW1990,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
You can get your APN settings from your network service provider, also make sure you have a BlackBerry data plan.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

I need help with export settings of FCP project edited HDV 16:9

Hello All,
I have searched the forum only to become more confused. I shot and edited my first HD project and am ready to burn it. What are the settings needed by DVDSP for my FCP export?
FCP 6.0.5
OSX 10.5.6
1080i

Export to 16:9 SD m2v.
Usually I use self contained with an uncompressed Codec then bring that into Compressor to use Virtual Clusters. Start with a Compressor preset that is 16:9 SD that fits the footage (in other words if the video is 67 minutes, start with the 90 Minutes) and adjust frame filters to resize "better"
Some more general info on encoding to make things fit and issues to keep in mind
http://dvdstepbystep.com/faqs_7.php
http://dvdstepbystep.com/faqs_3.php
Take a look at these threads, so more details and options
http://discussions.apple.com/thread.jspa?messageID=8715713&#8715713
http://discussions.apple.com/thread.jspa?messageID=9070936&#9070936
And the others on the subject. Type in "HD SD" and you will see many different disucssions

Help with Internet Settings for Blackberry Curve 8520 On Orange Pay-Monthly

I need help with my internet settings I'm currently on Orange Pay-Monthly and have recently bought a second hand Blackberry Curve 8520 which is unlocked but used to be on 02! I don't have a clue on what to do or where to start all I know is in the top right hand corner where the signal bar is it says GPRS and WIFI ! I don't want WIFI as I don't have a wireless connection and would like to get the settings for my curve so I can browse the internet and go on Facebook etc and BBM!! I've clicked on the internet logo in the menu bar but it just say's hotspot browser.. but wont let me browse!! Some one please help me !!

Hey BaByPaW1990,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
You can get your APN settings from your network service provider, also make sure you have a BlackBerry data plan.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Help with FMLE Settings for Sports Broadcast

Hello,
I am in need of some help tweaking my settings in FMLE. I put on various sports broadcasts, but one of my clients has limited bandwidth (avg ~2.5-3mbps upload).
I'd like to keep the output pixel size at 640x360 so that it takes up our entire player and doesn't letter box it, but with the larger video size I sometimes run in to either buffering,or pixelated video depending on how the bandwidth is that particular day. I'd like to stream between 800k-1000k.
I am using VP6 codec and using an Osprey Card as my capture device.
Some of my questions are:
1) Should I capture my video bigger than 640x360 and have FMLE shrink it, or capture it at the same size I want to output it at?
2) In the Format advanced encoder settings, What should I set as my keyframe, quality, and datarate window. Ideally I would like to use keyframes every 1-2 seconds because I work with fast-paced video, but I know that sends a lot of extra data. Same with Datarate Window. Can someone help explain the significance of this one.
3)Under the output panel, I am not currently using the auto adjust function. Should I enable this when my bandwidth takes a hit? If so, which is preferable, dropping frames or degrading quality? Any explanation wuold be very helpful.
4)Should I deinterlace my video? We have a 3-camera shoot using Canon XL2's and a DataVideo Switcher. Everything is analog SD.
I am able to drop by bitrate down to 600K and the stream does not buffer, but it starts to get pixelated. I would think that 3mbps upload bandwidth is enough to stream at 800k. Any help adjusting my settings to shapen the imagine would be greatly appreciated.
Thanks.

1) Should I capture my video bigger than 640x360 and have FMLE shrink it, or capture it at the same size I want to output it at?
--> Always capture at the same size, unless the device/card doesn't support that size.
2) In the Format advanced encoder settings, What should I set as my keyframe, quality, and datarate window. Ideally I would like to use keyframes every 1-2 seconds because I work with fast-paced video, but I know that sends a lot of extra data. Same with Datarate Window. Can someone help explain the significance of this one.
--> Data rate window is useful for unexpected source data that might not encode well within the specified bit-rates. For example, if you set data rate window to "tiny" and a complex frame (source data) arrives, then encoder will not allocate some extra bits to encode that frame in good quality. But if you set the window to huge, then that complex frame will be encoded in good quality by allocating more bits to it. So, basically, the "delta" around the specified bit-rate increases on moving from "tiny" to "huge" data rate window. Your output bit-rate will vary more in case of "huge" setting.
3)Under the output panel, I am not currently using the auto adjust function. Should I enable this when my bandwidth takes a hit? If so, which is preferable, dropping frames or degrading quality? Any explanation wuold be very helpful.
--> I can explain the difference between the 2 options and you can experiment with both and stick to one, which gives a better user experience under your bandwidth conditions.
a. Once the auto-adjust feature triggers, Drop frames option will intelligently drop some frames. As a result of this, you might observe video stalling depending upon the severity of the bandwidth conditions.
b. Once the auto-adjust feature triggers, Degrade quality option with a min. video bit-rate value of say 500 kbps will try to encode all the frames within this 500 kbps limit. As you are reducing the bit-rate from the original value of say 800 kbps, the quality is bound to degrade. If you check the "preserve per frame quality" option then the encoder will encode >=50% of the frames within the specified bit-rate of 500 kbps. As the no. of frames are less the per frame quality will be better than the previous case. There is a possiblity that even after degrading quality, the buffer is exceeding the given limit then the degrade quality option will automatically switch to the drop frames option.
4)Should I deinterlace my video? We have a 3-camera shoot using Canon XL2's and a DataVideo Switcher. Everything is analog SD.
--> Deinterlace option is only available for video sizes >= 640x480.

IPhoto Slideshow Export Settings for FCP 7

I made a slideshow using iPhoto '11 that I need to import into Final Cut Pro 7.0.3 so that it can be merged into a longer sequence with a few other things that will eventually be burned onto a DVD using Studio Pro and then set to play in a continuous loop.
My question is, what settings should I use exporting out of iPhoto? The photos were all taken with a Canon 5D. The sequence that I'll be importing the slideshow into will also have a sequence in it that was shot using the Sony HXR-NX5U. So, the native settings for that clip will be 1920x1080, square pixels, 23,98 fps, Apple ProRes 422 codec. I exported my iPhoto slideshow to match the settings as best as possible - 1920x1080 HD 16:9 was the closest option. I think the one difference is that the slideshow plays at 30 fps while the sequence matches the main video at 23.98 fps.
My issue is that the slideshow plays fine in iPhoto and even as a stand-alone movie loaded in QuickTime, but once I import it into Final Cut, I get motion artifacts. Even if I bring the slideshow into its own sequence, with the sequence settings matching those of the slideshow, the artifacts are still there. I can get rid of them using the Flicker Filter, but is there a way to resolve this issue during the iPhoto export? Should I be Deinterlacing the source video, leaving it as a progressive movie or selecting interlaced scaling? If it needs interlaced scaling, should I select upper or lower?
Or, are there better settings to get this slideshow to play better in Final Cut?

Yes. What we're setting up a booth at an upcoming event and have some promo videos we made, as well as the slideshows. The purpose of bringing them all into FCP was so I could put them all together in the timeline and export them as one big movie, which I'd them bring into DVD Studio Pro and set it to loop over and over.
Unless, of course, I could keep all the movies separate and create a "Play" button that plays movie #1, but modify the end jump to go to movie #2. Modify the end jump of movie #2 to go to movie #3, the end jump of movie #3 go to #4 and have the end jump of #4 go back to #1.
Would that work? If so, I can just put everything into Compressor.

Applet Not Running in IE. Need IE settings for running applet.

Hi
I am facing a problem with Applet while running in IE-6. The problem is very simple; Applet is not running in IE-6, not even a simple applet which displays just a Label.
I am using Java Version 1.4
Settings for IE is as follows
Java (Sun)
CHECKED Use Java 2 v1.4.0 for <applet>
Microsoft VM
CHECKED Java console enabled
NOT CHECKED Java logging enabled
CHECKED JIT compiler for virtual machine enabled
The applet is running in Appletviewer and run in IE in some other machine. The problem is in my browser and Java versions.
If I start the applet in IE it is not showing even Jave Console (which is enabled).
In Java Plugin (Control Panel) I enabled Show Console and set MSIE checked.
What should I do to solve such a stupid problem with my IE. I have updated my JVM and IE twice but yet to wait for solution.
Your help is worshipfully appericated.
with love Vijay

I got some reasonable solution from some other forum.
The Problem is with the VM. The JVM is crashed with MS VM.
That is why the browser diplays class not found error.
This is because the MS VM is not allowing the JVM to look for .class files.
This will happen for java 1.4.x .
If you use HTML converter (converting the applet to object) it will work.
But the Optimal solution is compile your applet file with -target option.
e-g
javac target 1.1 HelloWorld.java
It is the most efficient way to avoid such problems with IE while running the applets.
I Thank you all for your solutions.
with love Vija

Need help with JSSE settings for Axis2 auto-generated client.

Hi all.
I have several working clients generated for me in Axis2 from WSDL's using wsdl2java utility. The clients use HTTP transport but I need to use HTTPS now. I assume JSSE is used for SSL communication in Axis2.
I have created the keystore and set these parameters in code.
System.setProperty("javax.net.ssl.trustStore", "/path/to/.keystore");
System.setProperty("javax.net.ssl.trustStorePassword", "changeit");
The lower level mechanics such as socket creation and utilization are hidden from me in Axis2.
What other ssl parameters can be set similar to these? I particularly care about protocol, cipher, keep-alive? I couldn''t find the whole list with possible values. Or may be I should use some different method to set them?

Hi,
While creating the stub use https as end point instead of http.
example: https://java.bytesforall.org/webservices
Configure the properties for the SSL and so that jsse be have accordingly
https.cipherSuites,javax.net.ssl.trustStore ...etc.
If you are planning to make your webservice client FIPS complaint. Currently there is a problem with Axis1.4 it is not honoring the property "https.cipherSuites" to use the cipher suites.
Let me know, if you need any further help
~Balaji

I need the settings for a mail provider, fsmail, to add the mail to my iPhone 6. Can anyone help ? I have tried contacting the provider, which is EE, but they are impossible to get anything out of.

I have an old female.net account, which I want to manually add to my iPhone. However I can't find all the necessary settings to be able to do so. Can anyone help ? the provider, EE, has proved impossible to get anything from.

Well, in that case, you need to log into your account at female.net and get the mail setting from there.
Mail accounts have nothing to do with your carrier - they just provide your phone connection, so it's not really surprising that EE were not helpful, because this e-mail account has nothing to do with them.
Go to female-net and get the mail setting from there because the account is with them.

Need help with bios settings for Neo4 Platinum

Hi. I've checked several guides on bioses and still have questions about my settings. I'm not an overclocker, so I'm looking for stability over anything else (although I don't want my computer to run like a pig . I'll post what I have and the parts of the bios that I'm unsure of. I also have saved pictures of a Cpu-z scan if that helps. Any suggestions are much appreciated!
Here's my stuff:
Motherboard: MSI K8N NEo4 Platinum (MS-7125)
Processor: AMD Athlon 64 3000+ 512K 90nm (Winchester socket 939)
   clock frequency: 1800mhz
   system bus: 2000
   operating mode: 32/64
   voltage: 1.40v
   max temp: 70 degrees C
   thermal power: 89w
   L1 cache: 128KB
   L2 cache: 512KB
   cmos technology: 90nm SOI
   memory controller: 128-bit
Award bios version: 1.9
Installed ram: Micron Crucial Ballistix 512MBx2 (1024MB total) (Crucial
part number BL6464Z402)
   PC3200 400mhz Dual-Channel DDR Dimm (184 pins)
   configuration: 64Meg x 64
   unbuffered/non-ecc
   voltage: 2.8v
   memory timings:   2-2-2-6
Here's my current bios settings (I've only listed sections that contained settings that I was unsure of):
ADVANCED BIOS FEATURES
quick booting: enabled
boot to os/2: no
ioapic function: enabled
mps table version: 1.4
full screen logo display: disabled
seek floppy: enabled
typematic rate setting: enabled
typematic rate: 30
typematic delay: 1000
security option: setup
ADVANCED CHIPSET FEATURES
--->>DRAM CONFIGURATION
timing mode: manual
memclock index value: 200mhz
cas# latency TCL:2
min ras# active time TRAS: 6t
ras# to cas# delay TRCD: 2t
row precharge time TRP: 2t
row to row delay TRRD: auto
row cycle time TRC: 8t
row refresh cyc time TRFC: 11t
read-to-write time TRWT:auto
write recovery time TWR:auto
write to read delay: TWTR:auto
refresh period TREF:auto
user config mode: auto
x bottom of 32-bit [31:24] io: D8
x 1t/2t memory timing: 2t
x read preamble value: 8ns
x async latency value: 9ns
s/w memory hole remapping: disabled
mtrr mapping mode: continuous
PNP/PCI CONFIGURATIONS
primary graphic's adapter: first pcie
resources controlled by: auto (escd)
x irq resources setup: press enter
maximum payload size: 4096
CELL MENU
current cpu clock: 1810 mhz
current ddr clock: 201 mhz
high performance mode: manual
aggressive timing: disabled
dynamic overclocking: disabled
adjust cpu fsb frequency: 200
ht frequency: 5x
ht width: (down arrow 16/up arrow 16)
cpu spread spectrum: disabled
sata spread spectrum: disabled
pcie spread spectrum: disabled
pcie clock: 100 mhz
sse/sse2 instructions: enabled
cool'n'quiet: disabled
adjust cpu vid: startup
extra cpu voltage: by cpu vid
cpu voltage 1.400v
memory voltage: auto
nf4 voltage: 1.50v
Thanks again. xpfshost

I'll do that, thanks. I guess I'm really mostly clueless about the following items:
memclock index value: 200mhz
row cycle time TRC: 8t
row refresh cyc time TRFC: 11t
current cpu clock: 1810 mhz
current ddr clock: 201 mhz
adjust cpu fsb frequency: 200
ht frequency: 5x
ht width: (down arrow 16/up arrow 16
pcie clock: 100 mhz
Do they look OK?? Thanks!
xpfshost
Quote from: Grayone on 19-April-07, 05:13:03
Change your user config mode in dram configuration to manual and change your memory timing to 1T. The 1T setting will speed up your memory slightly.

Need help with capture settings for Beta SP

I'm trying to capture footage shot on Beta SP, capturing from a BetaCamSP UVW-1600 deck. I'm trying to capture at full quality, and currently have my capture preset set at 10-bit uncompressed. I'm not sure what the exact settings should be within the preset.
When I have it set to this preset, the footage shifts when there is camera movement, and when there are flashes from a snapshot camera in the footage, that frame becomes unusable.
This footage is for TV and I don't know how to get full quality and fix this image field shifting problem. Any help would be greatly appreciated.

How are you capturing this? With what capture card?
BetaSP is technically 8-bit uncompressed. All you are doing capturing 10-bit is increasing your file size.
8-bit uncompressed 29.97...whatever setting that is with your capture card.
Shane

Need help with jumper settings for k7n2 delta ilsr

I have a k7n2 delta ilsr and I'm using a AMD 2800+ barton 333 fsb. I'm not sure what the jumper settins are for this cpu. The users guide only shows 133/166 and 200, can anyone help me with the jumper settings.
Thanks, Ron.

Hi,
As your processor is 333FSB - the jumper should be set to 166FSB as should the BIOS. As your RAM CPU combination runs at 2x166=333 or thereabouts.
Basically, as a general rule, if you halve the FSB speed of your processor you'll get the setting for both BIOS and Jumper. 200FSB=100, 266FSB=133, 333FSB=166 etc. etc.
Axel

Need help to access settings for my ipod 4

I am getting a message when trying to open my ipod 4:Photos for the icloud account "icloud" can not ve accessed. Review your account information in settings. But how do I do that as can't swip to turn the ipod on>

- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.

URGENT HELP NEEDED (Bios Settings Failed)

Hey Guys,
I am having problems with my MSI Board, and don't know what to do. I am very much a noob to BIOS/and modding so I apologize in advance. You guys helped me a few months ago getting everything up and running and all was great for months. Then last night I walked away from my PC for a while and when i came back a starting screen was on saying my OC Settings Failed to load, i tried other versions I saved and they all failed as well. I ended up loading failsafe options, and got the "double start" where the computer turns on, then instantly shuts off, then turns on again. This allowed me to load windows 7, which then started to "install updates". So i think while i was away Windows automatically updated and rebooted... but would that effect my BIOS settings?
As I said, I had my system running perfect for months no errors or crashes at all based on the Bios setting you guys help me with in this thread: https://forum-en.msi.com/index.php?topic=147854.0
However, last week I removed the heat sink and installed this cooler: http://www.newegg.com/Product/Product.aspx?Item=N82E16835181010&nm_mc=OTC-Froogle&cm_mmc=OTC-Froogle-_-Water+Cooling-_-Corsair-_-35181010
All I did was unhook everything from the MB, install the cooler, and then hook everything back up to the MB. The only thing I may have done wrong is not connect the SATA devices (my HDs and ROMS) back in the spots they were in originally. However after I installed the cooler, they system booted right up, and I haven’t had any problems with my system for the past two weeks. I also should note I didnt make any BIOS changes either after I installed the cooler. So I don’t know if I should have done something there. Yet, like I said the system has been fine for the past two weeks, no crashes or errors... it wasn’t until last night after Windows auto updated that this has begun.
The reason I need "URGENT HELP" is because of course I just a new job with deadlines due and so much video editing work I need to do. I would be fine leaving it on failsafe settings, and forgetting the OC setting all together if I new that would make the system stable. But considering its still doing the "double start" even in failsafe mode, im afraid if i start working my system will crash.
So I am begging anybody for any advice or help they could provide. I will provide my system info below. If anybody can guide me as to what settings I should set in BIOS i would appreciate it. Or perhaps there’s a BIOS update that I should use now that I have a cooler and not a heat sink? If you need any more information from me, just ask. I will be monitoring this thread all day, as I desperately need help.
MY SYSTEM:
Intel 980X chip running Win 7 64bit (with MSI BigBang xPower MB installed in my old Dell XPS 730X)
(1) SATA II WD 3gb Hard Drive @ 1.5TB
(2) OCZ SATA II SSD drives @120GB: http://www.newegg.com/Product/Product.aspx?Item=N82E16820227543
(2) Hitachi 6gb SATA III drives @2TB: http://www.newegg.com/Product/Product.aspx?Item=N82E16822145473
3 DVD/CD/BLUERAY DRIVES:
1 SATA DVD DRIVE
1 SATA BlueRay Drive
1 SATA CD Drive
(So 8 SATA Devices Total)
24GIGs of this ram: http://www.newegg.com/Product/Product.aspx?Item=N82E16820145321
1 NVida Geforce GTX 470
1 Soundblaster X-Fi Titanum Card
New Addition Water Cooler: http://www.newegg.com/Product/Product.aspx?Item=N82E16835181010&nm_mc=OTC-Froogle&cm_mmc=OTC-Froogle-_-Water+Cooling-_-Corsair-_-35181010

PROBLEM: My OC BIOS setting wont load. Even on failsafe i get the "double start". I want to get back to my OC (stable) settings.
UPDATE: Since I posted somebody messaged me mentioned I should have "reset the CMOS" after I installed the new cooler. So I did that, and now they system starts fine without the "double start". I am able to load one of my saved OC settings now as well (but any others causes a failure).
NEW QUESTIONS:
1. Since I reset the CMOS and now the system is starting fine on my last OC settings, is it safe to assume the sytem is stable for now?
2. I never made any power changes or BIOS changes after I installed the new cooler. Should I have?
3. After I reset the CMOS was I soupposed to reinstall the drivers from the MSI disk again? I did not, and the system seems to be fine, but I thought I was soupposed to do that after a CMOS reset.
4. Is there a new BIOS version for my setup that may be better now? Im currently on v1.5
Here is a screenshot from CPUZ of the system information currently. This is with it booting normally after my CMOS reboot. I just figured id post it incase it helps with any of my questions. Thanks so much for helping guys!

HELP ! ... Need DVCAM settings for FCP 5.1

Similar Messages

Maybe you are looking for