Help need for a newbie with Athlon 64s

Hello I need help bad. I want to get a athlon 64 but there seem so complicated. I picked out wich cpu I am getting the 3000+ Newcastle. I can find A good mobo I am leaning towards A Msi. I want to get all my computer parts from Newegg. Can somebody pick me out a good mobo. That is easy to Overclock. Can run on Corsair (512x2) ram. And has 8x AGP.

the plat. nvida chipset also has a lockable bus which may prevent sata data loss with ocing. i am not sure of the success rate of it but msi boards are excellent ocer's just make sure you read , and research memory and get a big enough quality...over 25 amp on the 12 volt rail psu.
a good question for the amd 64 nvida thread....
i myself oc to 232 , although i dont have sata drives which will drop out at 220 and above .

Similar Messages

Help needed for building report with execution method Java Concurrent prog

Hi,
I have saw a report like this:
The report has executable "XML Publisher Data Template Executable", short name as "XDODTEXE", application "XML Publisher",execution method "Java Concurrent program". Also the report has a XML publisher Data Template and Data definition and in the data definition a .xml file is attached.
I could not understand what is the data source?
Could anyone help me on how to build or update this type of report?
Is there any link or help docs which has proper step by step procedure to build this type of xml publisher report?
Please help.
Thanks.

The xml file which is attached to the data definition is the data source and it has sql queries and structure of xml file.
Check this out for step-by-step guidance.
http://www.oracle.com/technetwork/middleware/bi-publisher/overview/xmlebsrep-132947.pdf
http://apps2fusion.com/at/ps/51-prabhakar/262-xml-publisher-and-data-template-sql-query-to-develop-bi-publisher-reports
For more on data templates refer user guide
http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/e12187/T421739T434255.htm

Licensing help needed for datacenter server with vm running windows server 2012 essentials and ten virtual desktops for remote access

NPO wants to get windows server 2012 r2 datacenter as the main operating system and then windows server 2012 r2 essentials plus 10 windows 8.1 as virtual desktops. Each desktop for one remote user running office 2013. Is there a better configuration?
In either case what licenses does the NPO need to purchase?
Bob

Hi,
For license related questions we recommend you contact Microsoft licensing specialist.
http://support.microsoft.com/kb/141850/en-us
Regards.
Vivian Wang

Help needed for importing Word with notes

Hello everyone,
I have a Word document that has about 80 short sections to it. Each section has endnotes, and the note numbering restarts with 1 at the beginning of each section. I have tried to import this document into CS3, but each time the notes appear as endnotes at the end of the document, not the end of each section. Worse, they number consecutively across sections. Quark, which also dumps notes at the end of the document, at least retains their original numbering, so I could cut-and-paste them back in place. Any information or suggestions on how to work this in INDD? Many thanks.

mgladue wrote:
Hello everyone,
I have a Word document that has about 80 short sections to it. Each section has endnotes, and the note numbering restarts with 1 at the beginning of each section. I have tried to import this document into CS3, but each time the notes appear as endnotes at the end of the document, not the end of each section. Worse, they number consecutively across sections. Quark, which also dumps notes at the end of the document, at least retains their original numbering, so I could cut-and-paste them back in place. Any information or suggestions on how to work this in INDD? Many thanks.
This Google search should find at least a few useful suggestions: InDesign word endnotes side headings script kahrel. "Kahrel" is for Peter Kahrel, who's contributed many useful InDesign scripts to the community, especially one that manipulates endnotes.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with re

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with reddish cast and loss of detail
System: Windows 7
Adobe CS5
Printer: Epson Stylus Photo 1400
Paper: Inkjet matte presentation paper with slight luster
Installed latest patch for Adobe CS5
Epson driver up to date
After reading solutions online and trying them for my settings for 2 days I am still unable to print what I am seeing on my screen in Adobe CS5. I calibrated my monitor, but am not sure once calibration is saved if I somehow use this setting in Photoshop’s color management.
The files I am printing are photographs of dogs with lots of detail I digitally painted with my Wacom tablet in Photoshop CS5 and then printed with Epson Stylus 1400 on inkjet paper 20lb with slight luster.
My Printed images lose a lot of the detail & come out way to dark with a reddish cast and loss of detail when I used these settings in the printing window:
Color Handling: Photoshop manages color, Color management -ICM, OFF no color adjustment.
When I change to these settings in printer window: Color Handling: Printer manages color. Color management- Color Controls, 1.8 Gamma and choose Epson Standard it prints lighter, but with reddish cast and very little detail and this is the best setting I have used so far.
Based on what I have read on line, I think the issue is mainly to do with what controls are set in the Photoshop Color Settings window and the Epson Printer preferences. I have screen images attached of these windows and would appreciate knowing what you recommend I enter for each choice.
Also I am confused as to what ICM color management system to use with this printer and CS5:
What is the best ICM to use with PS CS5 & the Epson 1400 printer? Should I use the same ICM for both?
Do I embed the ICM I choose into the new files I create?
Do I view all files in the CS5 workspace in this default ICM?
Do I set my monitor setting to the same ICM?
If new file opens in CS5 workspace and it has a different embedded profile than my workspace, do I convert it?
Do I set my printer, Monitor and PS CS5 color settings to the same ICM?
Is using the same ICM for all devices what is called a consistent workflow?
I appreciate any and all advice that can be sent my way on this complicated issue. Thank you in advance for your time and kind help.

It may be possible to figure out by watching a Dr.Brown video on the subject of color printing. Adobe tv
I hope this may help...............

Help needed for writing query

help needed for writing query
i have the following tables(with data) as mentioned below
FK*-foregin key (SUBJECTS)
FK**-foregin key (COMBINATION)
1)SUBJECTS(table name)
SUB_ID(NUMBER) SUB_CODE(VARCHAR2) SUB_NAME (VARCHAR2)
2           02           Computer Science
3           03           Physics
4           04           Chemistry
5           05           Mathematics
7           07           Commerce
8           08           Computer Applications
9           09           Biology
2)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2) SUB_ID1(NUMBER(FK*)) SUB_ID2(NUMBER(FK*)) SUB_ID3(NUMBER(FK*)) SUBJ_ID4(NUMBER(FK*))
383           S1      9           4           2           3
384           S2      4           2           5           3
---------I actually designed the ABOVE table also like this
3) a)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2)
383           S1
384           S2
b)COMBINATION_DET
COMBDET_ID(NUMBER) COMB_ID(FK**) SUB_ID(FK*)
1               383          9
2               383          4
3               383          2
4               383          3
5               384          4
6               384          2
7               384          5
8               384          3
Business rule: a combination consists of a maximum of 4 subjects (must contain)
and the user is less relevant to a COMB_NAME(name of combinations) but user need
the subjects contained in combinations
i need the following output
COMB_ID COMB_NAME SUBJECT1 SUBJECT2      SUBJECT3      SUBJECT4
383     S1     Biology Chemistry      Computer Science Physics
384     S2     Chemistry Computer Science Mathematics Physics
or even this is enough(what i actually needed)
COMB_ID     subjects
383           Biology,Chemistry,Computer Science,Physics
384           Chemistry,Computer Science,Mathematics,Physics
you can use any of the COMBINATION table(either (2) or (3))
and i want to know
1)which design is good in this case
(i think SUB_ID1,SUB_ID2,SUB_ID3,SUB_ID4 is not a
good method to link with same table but if 4 subjects only(and must) comes
detail table is not neccessary )
now i am achieving the result by program-coding in C# after getting the rows from oracle
i am using oracle 9i (also ODP.NET)
i want to know how can i get the result in the stored procedure itsef.
2)how it could be designed in any other way.
any help/suggestion is welcome
thanks for your time --Pradeesh

Well I forgot the table-alias, here now with:
SELECT C.COMB_ID
, C.COMB_NAME
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID1) AS SUBJECT_NAME1
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID2) AS SUBJECT_NAME2
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID3) AS SUBJECT_NAME3
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID4) AS SUBJECT_NAME4
FROM COMBINATION C;
As you need exactly 4 subjects, the columns-solution is just fine I would say.

File missing (file\BCD error code 0Xc0000034 help need for work!

file missing (file\BCD error code 0Xc0000034 help need for work! what can i do?
have an p 2000 notebook pc

Hi bobkunkle, welcome to the HP Forums. I understand you cannot boot passed the error you are receiving.
What is the model or product number of your notebook? What version of Windows is installed?
Guide to finding your product number
Which Windows operating system am I running?
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

What Kind of microcontroller is needed for alarm system with PIR sensors

Hi ! I'm student at Technical University Varna ,
Bulgaria . I'm interessted to create my own alarm system with Labview,
but I'm not sure what kind of controller i need and what kind of PIR
sensors. Thank You

This is duplicate post:
What Kind of microcontroller is needed for alarm system with PIR sensors

Help need for force to signout All session ! how...

hi
help need for force to signout All session ! how ??
Solved!
Go to Solution.

Hi and welcome to the Skype Community,
To force a signout of all instances your Skype is signed into please change your password: https://support.skype.com/en/faq/FA95/how-do-i-change-my-password
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Query help needed for querybuilder to use with lcm cli

Hi,
I had set up several queries to run with the lcm cli in order to back up personal folders, inboxes, etc. to lcmbiar files to use as backups. I have seen a few posts that are similar, but I have a specific question/concern.
I just recently had to reference one of these back ups only to find it was incomplete. Does the query used by the lcm cli also only pull the first 1000 rows? Is there a way to change this limit somwhere?
Also, since when importing this lcmbiar file for something 'generic' like 'all personal folders', pulls in WAY too much stuff, is there a better way to limit this? I am open to suggestions, but it would almost be better if I could create individual lcmbiar output files on a per user basis. This way, when/if I need to restore someone's personal folder contents, for example, I could find them by username and import just that lcmbiar file, as opposed to all 3000 of our users. I am not quite sure how to accomplish this...
Currently, with my limited windows scripting knowledge, I have set up a bat script to run each morning, that creates a 'runtime' properties file from a template, such that the lcmbiar file gets named uniquely for that day and its content. Then I call the lcm_cli using the proper command. The query within the properties file is currently very straightforward - select * from CI_INFOOBJECTS WHERE SI_ANCESTOR = 18.
To do what I want to do...
1) I'd first need a current list of usernames in a text file, that could be read (?) in and parsed to single out each user (remember we are talking about 3000) - not sure the best way to get this.
2) Then instead of just updating the the lcmbiar file name with a unique name as I do currently, I would also update the query (which would be different altogether): SELECT * from CI_INFOOBJECTS where SI_OWNER = '<username>' AND SI_ANCESTOR = 18.
In theory, that would grab everything owned by that user in their personal folder - right? and write it to its own lcmbiar file to a location I specify.
I just think chunking something like this is more effective and BO has no built in back up capability that already does this. We are on BO 4.0 SP7 right now, move to 4.1 SP4 over the summer.
Any thoughts on this would be much appreciated.
thanks,
Missy

Just wanted to pass along that SAP Support pointed me to KBA 1969259 which had some good example queries in it (they were helping me with a concern I had over the lcmbiar file output, not with query design). I was able to tweak one of the sample queries in this KBA to give me more of what I was after...
SELECT TOP 10000 static, relationships, SI_PARENT_FOLDER_CUID, SI_OWNER, SI_PATH FROM CI_INFOOBJECTS,CI_APPOBJECTS,CI_SYSTEMOBJECTS WHERE (DESCENDENTS ("si_name='Folder Hierarchy'","si_name='<username>'"))
This exports inboxes, personal folders, categories, and roles, which is more than I was after, but still necessary to back up.. so in a way, it is actually better because I have one lcmbiar file per user - contains all their 'personal' objects.
So between narrowing down my set of users to only those who actually have saved things to their personal folder and now having a query that actually returns what I expect it to return, along with the help below for a job to clean up these excessive amounts of promotion jobs I am now creating... I am all set!
Hopefully this can help someone else too!
Thanks,
missy

Help needed for ALV report

Hi,
i need to add coloums for the existing report which picks from G/L account.
in this report I need to add some more columns from COSP-KSTAR, which shows the cost element details from G/L account.
I need to restrict that cost element number according to the company code.
Plz see this and let me know the things.
1. I need to add FISCAL YEAR(COEP-GJAHR) in selection screen.
2. I need to add column: Employee Cost (CSKS-KOSTL)
3. add a column Staff Welfare (COSP-KSTAR) this is to restrict for the cost element 3000200 from G/L account
4. add a column Recruitment restrict for the cost element(COSP-KSTAR) 3100040 from G/L account
5. add a column Travels (suppressing some cost elements(COSP-KSTAR) and putting into Travels)
6. add a column Subcontracts restrict for the cost element (COSP-KSTAR)3100360 from G/L account
7. add a column Communication suppressing some cost elements and putting into Communication)
8. add a column Rent restrict for the cost element (COSP-KSTAR)3100055 from G/L account
9. add a column Back end Cost restrict for the cost element (COSP-KSTAR)3100065 from G/L account
i can hardcode these cost elements.
i did according to some of our sdn friends guidence but it is going to dump.
hear i am sending the code what i changed.
it is giving the error with the select.
SELECT BUKRS KOKRS gjahr kstar OBJNR OBJNR_N1 PERIO BEKNZ WKGBTR WOGBTR FROM
COEP INTO TABLE
IT_COEP FOR ALL ENTRIES IN IT_AUFK WHERE OBJNR = IT_AUFK-OBJNR and
perio in S_PERIO.
plz try to help me out in this issue.
hear i am sending the complete code what i worte.
*& Report ZPROJECT_PROFIT2
REPORT ZPROJECT_PROFIT2.
*********************MAIN DOCUMENTATION BLOCK*************************
Project Code           :
Program Name           :Zproject_profit1.
Purpose of program     :This report will give the gross margin for a project as
*a whole based on some selected input criteria.
Author of program      :JAYA KRISHNA .B.
INPUT/OUTPUT FILE      :nil
TYPE-POOLS : SLIS."For ALV display.
TABLES : COEP, "CO Object: Line Items (by period).
         AUFK,   "Order master data.
         csks,    "Cost center master data
         cosp.    "CO Objects
*& Include           ZSTRUCTURE
types:    BEGIN OF TY_COEP ,            "structure of table COEP.
          BUKRS LIKE COEP-BUKRS,
          KOKRS LIKE COEP-KOKRS,
          OBJNR LIKE COEP-OBJNR,
           gjahr like coep-gjahr,
          kstar like coep-kstar,
          OBJNR_N1 LIKE COEP-OBJNR_N1,
          PERIO LIKE COEP-PERIO,
          BEKNZ LIKE COEP-BEKNZ,
          WKGBTR LIKE COEP-WKGBTR,
          WOGBTR LIKE COEP-WOGBTR,
          BELNR LIKE COEP-BELNR,
          END OF TY_COEP,
         BEGIN OF TY_AUFK ,             "structure of table AUFK.
         BUKRS LIKE AUFK-BUKRS,
         KOKRS LIKE AUFK-KOKRS,
         OBJNR LIKE AUFK-OBJNR,
         KTEXT LIKE AUFK-KTEXT,
         ANFAUFNR LIKE AUFK-ANFAUFNR,
         AUFEX LIKE AUFK-AUFEX,
         USER2 LIKE AUFK-USER2,
         USER0 LIKE AUFK-USER0,
         USER1 LIKE AUFK-USER1,
         USER3 LIKE AUFK-USER3,
         USER6 LIKE AUFK-USER6,
         USER7 LIKE AUFK-USER7,
         USER8 LIKE AUFK-USER8,
         ABKRS(10) TYPE C,
         USER9 LIKE AUFK-USER9,
         AUFNR LIKE AUFK-AUFNR,
       END OF TY_AUFK,
       begin of ty_csks,
       kokrs like csks-kokrs,
        kostl like csks-kostl,
        bukrs like csks-bukrs,
        objnr like csks-objnr,
             end of ty_csks.
DATA :   BEGIN OF IT_COSP occurs 100,
       OBJNR LIKE COSP-OBJNR,
       GJAHR LIKE COSP-GJAHR,
       KSTAR LIKE COSP-KSTAR,
       END OF IT_COSP.
DATA : IT_COEP TYPE TABLE OF TY_COEP,     " Declaraton of tables COEP and AUFK.
       IT_AUFK TYPE TABLE OF TY_AUFK,
       IT_CSKS TYPE TABLE OF TY_CSKS.
      IT_COSP TYPE TABLE OF TY_COSP.
DATA : WA_COEP LIKE LINE OF IT_COEP,      " Declaration of work areas for tables COEP and AUFK.
       WA_AUFK LIKE LINE OF IT_AUFK,
       WA_CSKS LIKE LINE OF IT_CSKS.
      WA_COSP LIKE LINE OF IT_COSP.
DATA : BEGIN OF IT_DISPLAY OCCURS 0,      " Declaration of display table.
        OBJNR_N1 LIKE COEP-OBJNR_N1,
        OBJNR_N12 LIKE COEP-OBJNR_N1,
        KTEXT1 LIKE AUFK-KTEXT,
        WKGBTR LIKE COEP-WKGBTR,
        WOGBTR LIKE COEP-WOGBTR,
        WKGBTR1 LIKE COEP-WTGBTR,
        WOGBTR1 LIKE COEP-WOGBTR,
        ADDK LIKE COEP-WOGBTR,
        ADDO LIKE COEP-WOGBTR,
        ADDK1 LIKE COEP-WOGBTR,
        ADDO1 LIKE COEP-WOGBTR,
        PROFIT1 LIKE COEP-WOGBTR,
        PROFIT2 LIKE COEP-WOGBTR,
        BEKNZ LIKE COEP-BEKNZ,
        BUKRS LIKE AUFK-BUKRS,
        anfaufnr LIKE AUFK-anfaufnr,
        aufex like aufk-aufex,
        OBJNR LIKE AUFK-OBJNR,
        USER2 LIKE AUFK-USER2,
        USER0 LIKE AUFK-USER0,
        USER1 LIKE AUFK-USER1,
        USER3 LIKE AUFK-USER3,
        USER6 LIKE AUFK-USER6,
        USER7 LIKE AUFK-USER7,
        USER8 LIKE AUFK-USER8,
        ABKRS LIKE AUFK-ABKRS,
        USER9 LIKE AUFK-USER9,
        PERIO LIKE COEP-PERIO,
        AUFNR LIKE AUFK-AUFNR,
        STR(5) TYPE C,
        WORK(10) TYPE C,
       END OF IT_DISPLAY,
: BEGIN OF IT_DISPLAY1 OCCURS 0,      " Declaration of second display table.
     OBJNR_N1 LIKE COEP-OBJNR_N1,
     OBJNR_N12 LIKE COEP-OBJNR_N1,
     KTEXT1 LIKE AUFK-KTEXT,
     WKGBTR LIKE COEP-WKGBTR,
     WOGBTR LIKE COEP-WOGBTR,
     WKGBTR1 LIKE COEP-WTGBTR,
     WOGBTR1 LIKE COEP-WOGBTR,
     ADDK LIKE COEP-WOGBTR,
     ADDO LIKE COEP-WOGBTR,
     ADDK1 LIKE COEP-WOGBTR,
     ADDO1 LIKE COEP-WOGBTR,
     PROFIT1 LIKE COEP-WOGBTR,
     PROFIT2 LIKE COEP-WOGBTR,
     BEKNZ LIKE COEP-BEKNZ,
     BUKRS LIKE AUFK-BUKRS,
     anfaufnr like aufk-anfaufnr,
     aufex like aufk-aufex,
     OBJNR LIKE AUFK-OBJNR,
     USER2 LIKE AUFK-USER2,
     USER0 LIKE AUFK-USER0,
     USER1 LIKE AUFK-USER1,
     USER3 LIKE AUFK-USER3,
     USER6 LIKE AUFK-USER6,
     USER7 LIKE AUFK-USER7,
     USER8 LIKE AUFK-USER8,
     ABKRS LIKE AUFK-ABKRS,
     USER9 LIKE AUFK-USER9,
     PERIO LIKE COEP-PERIO,
     AUFNR LIKE AUFK-AUFNR,
     STR(5) TYPE C,
     WORK(10) TYPE C,
    END OF IT_DISPLAY1.
data : it_field type slis_fieldcat_alv,        " Declaration of ALV variables
       it_field_t type slis_t_fieldcat_alv,
        xlayout    TYPE slis_layout_alv.
data : it_event type slis_t_event,
      wa_event like line of it_event.
DATA : WA_TOP TYPE SLIS_LISTHEADER,
       IT_TOP TYPE SLIS_T_LISTHEADER.
data:w_lines type i,
      w_occurs type i,
      STR(5) TYPE C,
      WORK(10) TYPE C.
      constants : c_selection type char20 value 'Selection based on'. " Declaration of a constant.
selection-screen BEGIN OF BLOCK BLK WITH FRAME TITLE TEXT-000.
SELECT-OPTIONS S_BUKRS FOR AUFK-BUKRS OBLIGATORY.
SELECT-OPTIONS S_OBJNR FOR AUFK-AUFNR.
SELECT-OPTIONS S_ANF FOR AUFK-ANFAUFNR.
SELECT-OPTIONS S_AUFEX FOR AUFK-AUFEX.
SELECT-OPTIONS S_USER2 FOR AUFK-USER2.
SELECT-OPTIONS S_USER0 FOR AUFK-USER0.
SELECT-OPTIONS S_USER1 FOR AUFK-USER1.
SELECT-OPTIONS S_USER3 FOR AUFK-USER3.
SELECT-OPTIONS S_USER6 FOR AUFK-USER6.
SELECT-OPTIONS S_ABKRS FOR AUFK-ABKRS.
SELECT-options s_gjahr for coep-gjahr obligatory.
SELECT-OPTIONS S_PERIO FOR COEP-PERIO OBLIGATORY.
SELECTION-SCREEN END OF BLOCK BLK .
SELECTION-SCREEN BEGIN OF BLOCK BLK1 WITH FRAME TITLE TEXT-001.
PARAMETERS : ONSITE RADIOBUTTON GROUP RADI.
PARAMETERS : OFFSHORE RADIOBUTTON GROUP RADI.
PARAMETERS : BOTH RADIOBUTTON GROUP RADI.
SELECTION-SCREEN END OF BLOCK BLK1 .
start-of-selection.
*ZAUFK
                              " Selection of records from aufk to internal table.
IF ONSITE EQ 'X' .
SELECT
BUKRS
KOKRS
OBJNR
KTEXT
anfaufnr
aufex
USER2
USER0
USER1
USER3
USER6
USER7
USER8
ABKRS
USER9
AUFNR
FROM AUFK INTO TABLE IT_AUFK WHERE BUKRS IN S_BUKRS AND
anfaufnr IN s_anf AND
aufex in s_aufex and
aufnr IN S_OBJNR AND
USER2 IN S_USER2 AND
USER0 IN S_USER0 AND
USER1 IN S_USER1 AND
USER3 IN S_USER3 AND
USER6 IN S_USER6 AND
ABKRS IN S_ABKRS AND
USER9 EQ 'X' .
ENDIF.
IF OFFSHORE EQ 'X'.
SELECT
BUKRS
KOKRS
OBJNR
KTEXT
anfaufnr
aufex
USER2
USER0
USER1
USER3
USER6
USER7
USER8
ABKRS
USER9
AUFNR
FROM AUFK INTO TABLE IT_AUFK WHERE BUKRS IN S_BUKRS AND
anfaufnr IN S_anf AND
aufex in s_aufex and
aufnR IN S_OBJNR AND
USER2 IN S_USER2 AND
USER0 IN S_USER0 AND
USER1 IN S_USER1 AND
USER3 IN S_USER3 AND
USER6 IN S_USER6 AND
ABKRS IN S_ABKRS AND
USER9 <> 'X'.
ENDIF.
IF BOTH EQ 'X'.
SELECT
BUKRS
KOKRS
OBJNR
KTEXT
anfaufnr
aufex
USER2
USER0
USER1
USER3
USER6
USER7
USER8
ABKRS
USER9
AUFNR
FROM AUFK INTO TABLE IT_AUFK WHERE BUKRS IN S_BUKRS AND
anfaufnr IN S_anf AND
aufex in s_aufex and
aufNR IN S_OBJNR AND
USER2 IN S_USER2 AND
USER0 IN S_USER0 AND
USER1 IN S_USER1 AND
USER3 IN S_USER3 AND
USER6 IN S_USER6 AND
ABKRS IN S_ABKRS.
ENDIF.
*& Include           ZCOEP
                              " Selection of records from coep to internal table.
SELECT BUKRS KOKRS gjahr kstar OBJNR OBJNR_N1 PERIO BEKNZ WKGBTR WOGBTR FROM
COEP INTO TABLE
IT_COEP FOR ALL ENTRIES IN IT_AUFK WHERE OBJNR = IT_AUFK-OBJNR and
perio in S_PERIO.
*& Include           ZPROFIT_CALC
                             " Calculations for income and Profit of the employee.
if not it_coep[] is initial.
    select objnr gjahr wrttp versn kstar from cosp into TABLE It_cosp for
all entries in it_coep where objnr = IT_COEP-objnr .
endif.
LOOP AT IT_coep INTO WA_coep.
    read table IT_aufk into WA_aufk with key OBJNR = wa_coep-OBJNR.
case it_cosp-kstar.
when '3000200'.
it_cosp-kstar = cosp-kstar.
when '3100040'.
it_cosp-kstar = cosp-kstar.
when '3100360'.
it_cosp-kstar = cosp-kstar.
when '3100055'.
it_cosp-kstar = cosp-kstar.
when '3100065'.
it_cosp-kstar = cosp-kstar.
when '3100115'.
it_cosp-kstar = cosp-kstar.
when '3100120'.
it_cosp-kstar = cosp-kstar.
when '3100130'.
it_cosp-kstar = cosp-kstar.
when '3100135'.
it_cosp-kstar = cosp-kstar.
when '3100140'.
it_cosp-kstar = cosp-kstar.
when '3100145'.
it_cosp-kstar = cosp-kstar.
when '3100150'.
it_cosp-kstar = cosp-kstar.
when '3100155'.
it_cosp-kstar = cosp-kstar.
when '3100160'.
it_cosp-kstar = cosp-kstar.
when '3100165'.
it_cosp-kstar = cosp-kstar.
when '3100170'.
it_cosp-kstar = cosp-kstar.
endcase.
    IT_DISPLAY-BUKRS = WA_AUFK-BUKRS.
    IT_DISPLAY-anfaufnr = WA_AUFK-anfaufnr.
    it_display-aufex = wa_aufk-aufex.
    IT_DISPLAY-OBJNR = WA_AUFK-OBJNR.
    IT_DISPLAY-USER2 = WA_AUFK-USER2.
    IT_DISPLAY-USER0 = WA_AUFK-USER0.
    IT_DISPLAY-USER1 = WA_AUFK-USER1.
    IT_DISPLAY-USER3 = WA_AUFK-USER3.
    IT_DISPLAY-USER6 = WA_AUFK-USER6.
    IT_DISPLAY-USER7 = WA_AUFK-USER7.
    IT_DISPLAY-USER8 = WA_AUFK-USER8.
    IT_DISPLAY-ABKRS = WA_AUFK-ABKRS.
    IT_DISPLAY-USER9 = WA_AUFK-USER9.
    IT_DISPLAY-KTEXT1 = WA_AUFK-KTEXT.
    if WA_AUFK-abkrs = 01.
      IT_DISPLAY-STR = 'TM'.
    ENDIF.
    IF WA_AUFK-ABKRS = 02.
      IT_DISPLAY-STR = 'FP'.
    ENDIF.
    IF WA_AUFK-USER9 = 'X'.
      IT_DISPLAY-WORK = 'ONSITE'.
    ENDIF.
    IF WA_AUFK-USER9 <> 'X'.
      IT_DISPLAY-WORK = 'OFFSHORE'.
    ENDIF.
    it_display-ABKRS = it_display-user7.
    IF wa_coep-BEKNZ = 'S'.
      IT_DISPLAY-WKGBTR = WA_COEP-WKGBTR.
      IT_DISPLAY-WOGBTR = WA_COEP-WOGBTR.
      IT_DISPLAY-ADDK = IT_DISPLAY-ADDK + IT_DISPLAY-WKGBTR.
      IT_DISPLAY-ADDO = IT_DISPLAY-ADDO + IT_DISPLAY-WOGBTR.
      IT_DISPLAY-ADDK1 = 0.
      IT_DISPLAY-ADDO1 = 0.
      IT_DISPLAY-PROFIT1 = IT_DISPLAY-ADDK1 + IT_DISPLAY-ADDK.
      IT_DISPLAY-PROFIT2 = IT_DISPLAY-ADDO1 + IT_DISPLAY-ADDO.
      APPEND IT_DISPLAY.
    ENDIF.
    IF WA_COEP-BEKNZ = 'H'.
      IT_DISPLAY-WKGBTR1 = WA_COEP-WKGBTR.
      IT_DISPLAY-WOGBTR1 = WA_COEP-WOGBTR.
      IT_DISPLAY-ADDK1 = IT_DISPLAY-ADDK + IT_DISPLAY-WKGBTR1.
      IT_DISPLAY-ADDO1 = IT_DISPLAY-ADDO + IT_DISPLAY-WOGBTR1.
      IT_DISPLAY-ADDK = 0.
      IT_DISPLAY-ADDO = 0.
      IT_DISPLAY-PROFIT1 = IT_DISPLAY-ADDK1 + IT_DISPLAY-ADDK.
      IT_DISPLAY-PROFIT2 = IT_DISPLAY-ADDO1 + IT_DISPLAY-ADDO.
      APPEND IT_DISPLAY.
    ENDIF.
    collect it_display into it_display1.
    clear it_display.
ENDLOOP.
                    "calc
*& Include           ZPROFIT_DISPLAY
LOOP AT IT_DISPLAY1.                                         "it_display.
    read table IT_COEP into WA_COEP with key OBJNR =
    IT_DISPLAY-OBJNR.
    read table IT_AUFK into WA_AUFK with key aufnr = IT_DISPLAY-aufnr.
    if WA_AUFK-abkrs = 01.
      STR = 'TM'.
    ENDIF.
    IF WA_AUFK-ABKRS = 02.
      STR = 'FP'.
    ENDIF.
    IF WA_AUFK-USER9 = 'X'.
      WORK = 'ONSITE'.
    ENDIF.
    IF WA_AUFK-USER9 <> 'X'.
      WORK = 'OFFSHORE'.
    ENDIF.
endloop.
clear it_field.
it_field-col_pos = 1.
it_field-fieldname = 'AUFNR'.
it_field-seltext_l = 'project id.'.
it_field-outputlen = 15.
append it_field to it_field_t.
CLEAR it_field.
clear it_field.
it_field-col_pos = 2.
it_field-fieldname = 'KTEXT1'.
it_field-seltext_l = 'Project Name'.
it_field-outputlen = 20.
append it_field to it_field_t.
CLEAR it_field.
clear it_field.
it_field-col_pos = 3.
it_field-fieldname = 'USER7'.
it_field-seltext_l = 'Start Date'.
it_field-do_sum = 'X'.
it_field-outputlen = 20.
append it_field to it_field_t.
CLEAR it_field.
clear it_field.
it_field-col_pos = 4.
it_field-fieldname = 'USER8'.
it_field-seltext_l = 'End Date'.
it_field-do_sum = 'X'.
it_field-outputlen = 20.
append it_field to it_field_t.
CLEAR it_field.
clear it_field.
it_field-col_pos = 5.
it_field-fieldname = 'USER2'.
it_field-seltext_l = 'Location'.
it_field-do_sum = 'X'.
it_field-outputlen = 20.
append it_field to it_field_t.
CLEAR it_field.
clear it_field.
it_field-col_pos = 6.
it_field-fieldname = 'USER0'.
it_field-seltext_l = 'Vertical'.
it_field-do_sum = 'X'.
it_field-outputlen = 20.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 7.
it_field-fieldname = 'USER1'.
it_field-seltext_l = 'Sub_vertical'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 8.
it_field-fieldname = 'USER3'.
it_field-seltext_l = 'Technology'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 9.
it_field-fieldname = 'USER6'.
it_field-seltext_l = 'Department'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 10.
it_field-fieldname = 'WORK'.
it_field-seltext_l = 'Onsite/Offshore'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 11.
it_field-fieldname = 'STR'.
it_field-seltext_l = 'T&M/FP'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 12.
it_field-fieldname = 'KOSTL'.
it_field-seltext_l = 'EMP COST'.
it_field-outputlen = 10.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 13.
it_field-fieldname = 'KSTAR'.
it_field-seltext_l = 'STAFF WELFARE'.
it_field-outputlen = 10.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 14.
it_field-fieldname = 'KSTAR'.
it_field-seltext_l = 'RECRUITMENT'.
it_field-outputlen = 10.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 15.
it_field-fieldname = 'KSTAR'.
it_field-seltext_l = 'TRAVELS'.
it_field-outputlen = 10.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 16.
it_field-fieldname = 'KSTAR'.
it_field-seltext_l = 'SUBCONTRACT'.
it_field-outputlen = 10.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 17.
it_field-fieldname = 'KSTAR'.
it_field-seltext_l = 'COMMUNICATION'.
it_field-outputlen = 10.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 18.
it_field-fieldname = 'KSTAR'.
it_field-seltext_l = 'RENT'.
it_field-outputlen = 10.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 19.
it_field-fieldname = 'KSTAR'.
it_field-seltext_l = 'BACKEND COST (PROJECT EXP)'.
it_field-outputlen = 10.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 20.
it_field-fieldname = 'ADDO'.
it_field-seltext_l = 'Direct costs'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 21.
it_field-fieldname = 'ADDO1'.
it_field-seltext_l = 'Income'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 22.
it_field-fieldname = 'PROFIT2'.
it_field-seltext_l = 'Profit(income-costs)'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 23.
it_field-fieldname = 'ADDK'.
it_field-seltext_l = 'Direct costs(Grp cur)'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 24.
it_field-fieldname = 'ADDK1'.
it_field-seltext_l = 'Income(Grp Cur)'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 25.
it_field-fieldname = 'PROFIT1'.
it_field-seltext_l = 'Profit(income-costs)'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
xlayout-zebra = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
     I_CALLBACK_PROGRAM                = 'ZPROJECT_PROFIT1'
I_CALLBACK_PF_STATUS_SET          = ' '
     I_CALLBACK_USER_COMMAND           = 'USER_COMMAND'
     I_CALLBACK_TOP_OF_PAGE            = 'TOP_OF_PAGE_PROFIT'
I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = ' '
I_GRID_TITLE                      =
I_GRID_SETTINGS                   =
     IS_LAYOUT                         = xlayout
     IT_FIELDCAT                       = it_field_t
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
IT_SORT                           =
IT_FILTER                         =
IS_SEL_HIDE                       =
     I_DEFAULT                         = 'X'
     I_SAVE                            = ' '
IS_VARIANT                        =
IT_EVENTS                         =
IT_EVENT_EXIT                     =
IS_PRINT                          =
IS_REPREP_ID                      =
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
I_HTML_HEIGHT_TOP                 = 0
I_HTML_HEIGHT_END                 = 0
IT_ALV_GRAPHICS                   =
IT_HYPERLINK                      =
IT_ADD_FIELDCAT                   =
IT_EXCEPT_QINFO                   =
IR_SALV_FULLSCREEN_ADAPTER        =
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
   TABLES
      T_OUTTAB                          = IT_DISPLAY1
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
clear it_field_t.
"it_display.
FORM USER_COMMAND using r_ucomm like sy-ucomm rs type slis_selfield.
include zinteractive_profit."Secondary list for calling KO03.
ENDFORM.                    "USER_COMMAND.
Thanks & Regards,
Lakshmi..

Hi,
i did according to ur suggession.
now it is going dump.
and it is telling like this.
2629               i_event_name      = 'SUBTOTAL_TEXT'
2630               is_subtottxt_info = ls_subtot_info
2631               ip_subtot_line    = lr_data
2632             changing
2633               c_subtottxt       = l_subtottxt.
2634           ls_lvc_data-value = l_subtottxt.
2635
2636           append ls_lvc_data to ct_lvc_data.
2637         endif.
2638
2639 ************************************
2640 * Column per Fieldcat Entry
2641 ************************************
2642         clear ls_lvc_data-style.
2643         loop at it_fcat_local assigning <ls_fcat>
2644                 where tech ne 'X' and no_out ne 'X'.
2645           if l_invisible eq 'X'.
2646             clear l_invisible.
2647             if <ls_fcat>-do_sum is initial.
2648               continue.
2649             else.
2650               clear ls_lvc_data-col_pos.
2651             endif.
2652           endif.
2653
2654           add 1 to ls_lvc_data-col_pos.
2655
2656           assign component <ls_fcat>-fieldname
2657                            of structure <ls_data> to <l_field_val
2658           if sy-subrc ne 0.
>>>>>             message x000(0k).
2660           endif.
2661
2662 *... work on average
2663           if <ls_fcat>-do_sum eq 'C'.
2664             clear l_entries.
2665
2666             assign space to <l_unit>.
2667             if not <ls_fcat>-cfieldname is initial.
2668               assign component <ls_fcat>-cfieldname
2669                      of structure <ls_data> to <l_unit>.
2670             endif.
2671             if not <ls_fcat>-qfieldname is initial.
2672               assign component <ls_fcat>-qfieldname
2673                      of structure <ls_data> to <l_unit>.
2674             endif.
2675
2676             l_from = ls_grpl-index_from.
2677             l_to   = ls_grpl-index_to.
2678             if ls_grpl-index_from is initial and
plz any of u help me to come out with solution.
Thanks & Regards,
Lakshmi..

WRT160N Version 3; SERIOUS HELP NEEDED FOR SETUP PLZ??!?!?!

I bought this router probably around 3 weeks ago.
The following is a list of chronological scenarios that i have tried in order to install it and everything during the first week that i got it:
1. I followed the CD's instructions, got LELA, but then when i used LELA to 'add another computer' it just gave an error, and then after this i could not be screwed using LELA anymore and so i uninstalled it, and then went online to 192.168.1.1 to configure the settings of the router, SSID, password and security which i put was WPA2 etc.
BUT THIS DID not work at all, i have 2 laptops, 1 of them which is new, and the other which was a couple of years old, they could not detect anything.
2. I then did some internet research, and read on these forums that i needed to change some of its advanced wireless settings, i did that. And then I could actually connect......and was extremely happy at this moment, BUT the next day i noticed, that even though i was about a metre away from the router, my speed was varying BADLY, initially when i first connect with my new laptop which has a Intel Wifi 5100AGN adapter it has a speed of 144mbps, but when i open internet explorer, i see the speed going slower and slower, until it is 1mbps, and sometimes the wireless just cuts out. This happened to my other laptop as well.
3. I then called for technical assistance, spent so much time talking trying to solve, and downloaded the latest firmware, reflashed the router, but still it has this problem of slowing speeds which is really frustrating.
And doing some more talking and following more instructions from the person on the phone, both my laptops could not connect to the router, even though it can see it at 'Excellent' connectivity.
4. And so, the person on the phone concluded that i should exchange the router with new one, which i am planning to do, and will probably get it tomorrow. But i am also thinking to myself whether or not to get a different one.
SOME NOTES:
-When it is wired the internet works fine
-the adapter in the older laptop is a intel 2200BG, so i know that it would probably go at a max speed of 54mbps
-when i said changing advanced wireless settings, i meant changing frequency/RTS/beacon levels etc to the values i have seen on these fourms.
CURRENTLY, since i am exchanging i have gone back to the old ASUS router which is G. and it connects well with the old laptop with a constant speed of 54mbps, but havent tried the new laptop as i can not be bothered. Also my main reason of getting a N router is just for range, because with the current one, i just cannot detect the router when i am in my bedroom, which is less than 20m, even if i can detect it is is very poor connectivity, WHERE AS with the WRT160n before i exchanged it, i could detect at first with Excellent connectivity, but as i said, the problems with speed and wireless cutting out etc is what results from this router.
I guess my main point is that, i want to ask any of you have used the VERSION 3 of WRT160N, and is currently working very well wirelessly. Can u please tell me the step-by-step instructions to help me set this router perfectly?
regards

Try updating both of your laptops wireless cards that could fix the problem (you know may not be compatible with your WRT160N).
I know you said you changed the channel your router broadcasting in but do you have a lot of other wireless networks in your area???
GoodLuck
Matt

Urgent Help Needed for WVC210 camera setup :)

Please help! I am trying to set up a Cisco WVC210 surveilance camera at one of the stores owned by the company I work for. Its a small business and I am the closest they have to an I.T person !! I have plenty of experience with software but not much on networking so need some idiot proof guidance ! The "administrative guide" is not worth the paper it is printed on!!
The store has a fixed IP address of 212.9.##.### I connected the camera using ethernet cable. Set the camera up using the software for the camera, with static ip address of 192.168.0.23. Set the SSID of the camera to that of the router (a Netgear one). It worked fine. I went to unplug so I could have it wireless and NOTHING !! It did work one time (no idea what i did differently!) but it would not work over the internet which is what we need it to do! I need the whole thing password protected too!
Is there ANYONE who can help me please??? I am at the point of running away from my work and never returning !!!! :s
Thank you

Hi Jodie,
Thank you for posting. In order to make the camera connect wirelessly, first set up the wireless settings in the camera to match the router. I usually open the router configuration page and copy and paste the SSID and Security Passphrase to the camera to avoid error. The next step is to unplug the ethernet cable and power cord from the camera. Then plug only the power back in and the camera should connect wirelessly.
For remote access to the camera you will need to forward port 80 to the LAN IP address of the camera. (192.168.0.23) This is done in the router. If you need help with port forwarding, you can search the web or call Netgear for assistance.
If you continue to need assistance with the camera, the fastest and easiest way to get assistance is to call Cisco Small Business Support. www.cisco.com/go/sbsc
Please go to www.cisco.com and click on "Register" in the upper right to create a user ID. This will allow our engineers to create a case for you.

Help needed for using BASIC authentication through JDBCRealm

Help needed.
Hello,
I am doing a degree project, so far it works fine in my local machine, I need to try it on my virtual hosting (as it is a live server).
My project requires JDBCRealm, that is BASIC authentication loading access data from mysql database. Normally this setup can be done in Server.xml file, because my Tomcat hosting is a virtual one, I only have permission to access the web.xml file.
My question is: is it possible to get it done in an alternative way? In web.xml? Some properties file maybe?
Thank you very much.

You can set this up for your context using META-INF/context.xml instead of working with server.xml.
Make a directory called META-INF under your webapp ( it'll be at the same level as WEB-INF ). Under this, add a context.xml with all your context specific configuration including the realm. A sample is below
<?xml version="1.0" encoding="UTF-8"?>
<Context path="/myApp" reloadable="true">
    <Realm
        className="org.apache.catalina.realm.JDBCRealm"
        driverName="com.microsoft.jdbc.sqlserver.SQLServerDriver"
        connectionURL="jdbc:microsoft:sqlserver://127.0.0.1:1433;DatabaseName=myDB;SelectMethod=Cursor;"
        connectionName="username" connectionPassword="password"
        digest="MD5" userTable="users" userNameCol="userid" userCredCol="userpassword"
        userRoleTable="user_roles" roleNameCol="rolename"
    />
</Context>Hope this helps.
People on the forum help others voluntarily, it's not their job.
Help them help you.
Learn how to ask questions first: http://faq.javaranch.com/java/HowToAskQuestionsOnJavaRanch
----------------------------------------------------------------

Mapping conversion help needed for date

Hi Experts,
I need help in message mapping convesion for date field
The source date field can have value '2010-06-04T02:09:59.610-07:00' or 2010-06-04T02:09:60.610-07:00
I have to change it to '2010-06-04T02:09:59.000-07:00'. ie, if the seconds are 59.XXX, or 60.XXX, then change to 59.000.
Please let me know the best way to do this
Thanks
Mike

Again, to make it more clear
The source date field can have any date value such as
2010-06-04T02:09:59.610-07:00 -
This needs to be changed to 2010-06-04T02:09:59.000-07:00
2010-06-04T02:09:60.610-07:00 -- This needs to be changed to 2010-06-04T02:09:59.000-07:00
2010-06-04T02:09:60.000-07:00 -- This needs to be changed to 2010-06-04T02:09:59.000-07:00
2010-06-04T02:09:59.000-07:00 - This need not be changed
2010-06-04T02:09:58.610-07:00 -- This need not be changed
2010-06-04T02:09:57.610-07:00 etc etc - These need not be changed.
The only change using date function is for the first two dates, in which 59.XXX and 60.XXX need to be replaced with 59.000
Using the above date function, all the seconds 59.XXX, 58.XXX, 60.XXX, etc etc,,, are converted to 59.000, 58.000 and 60.000
I dont need this as per the requirement. So looks like the UDF needs to be altered a little to accomodate my requirement.
Please help me.
Thanks
Mike

Help need for a newbie with Athlon 64s

Similar Messages

Maybe you are looking for