Help need for drivers on windows server 2003

Hi there....... I just have a request to you....... I am having Lenovo 3000 N 200. Recently I installed Windows server 2003 on My D Drive..... But what the problem is some drivers I installed but I cant find some drivers like VGA Drivers, Vedio Drivers,PCI Device like...... could you please let me know where can i download these drivers........... ( some of the xp drivers are compatible with server 2003 and some ot them are not...)
Thankin you,,,
Desparado..............

Similar Messages

Windows 7 x64 can't read/install any printer drivers from Windows Server 2003 x64 (AMD64 folder and HP Deskjet 855c)

I read the thread Widows 7 printer
HP deskjet 855c driver about possible installation of HP855c drivers onto Windows 7 x64 from "Windows Server 2003 x64" CD but I didn't have enough luck to succeed with doing it on my laptop. That thread appears to be dead now
as it is marked "Answered", so I'm asking for help here. I have Toshiba Satellite P500 with Windows 7 Home Premium 64-bit (http://i55.tinypic.com/2zgth6v.jpg).
Let me tell you first that I don't have access to Windows Server 2003 x64 or XP Pro 64 CD's. However I did some research online, which eventually forced me to learn about the "file sharing". After extensive search I was able to get the copies
of AMD64 folders from Windows Server 2003 R2 Standard x64 with SP2 and
XP Pro 64. The reason that I went also after XP Pro was because I thought that the extra wording "R2 Standard x64 with SP2" in description of "Windows Server 2003" did not reflect the exact name provided by poster
Alan. I couldn't find just "Windows Server 2003 x64" (does it matter?).
Anyway, I followed first the drill with running "printui /s /t2" and disabling UAC, and then in both cases I was able to locate the
NTPRINT.INF file (http://oi51.tinypic.com/9qwvt2.jpg - this image is from XP Pro AMD64 folder) but each time when I
attempted to install the driver, I got the same message stating:
"The folder you specified doesn't contain a compatible software drive for your device. If the folder contains the driver, make sure it's designed to work with Windows for x64-based systems." (http://oi53.tinypic.com/27yveiw.jpg)
Why aren't there x64 drivers?
During several installation attempts I had the printer connected to or disconnected from my laptop. It didn't make any difference. I must add that for this purpose I had to use different cable than the original one designated only for the
Parallel port in my old desktop with Windows XP. My new laptop with Windows 7 x64 came only with 3 USB ports (plus 1 HDMI and 1 Serial). Because of that situation I bought in advance a new printer cable called “USB to 36-pin Parallel Port Adapter
Cable” (http://www.amazon.com/gp/product/B003A8I75E). I'm not sure, if it will work until I can install the printer.
Besides, nobody talked about this issue yet. I was also playing with the port choices in "Add printer" step; changing from default LPT1 to USB001 with the same negative results.
I don't know what I'm doing wrong. I was very hopeful after reading positive "case closed" notes there.
Can anyone help me here, maybe by making the necessary files available for download? I'm willing to pay for such assistance or make a donation, if necessary. Seriously. Judging by the large number of views of the original
thread, one could assume that there is a potential demand for such service. It would be more human to pay few bucks for a few driver files than $900 for the whole Windows Server 2003 x64 CD, no? Can Microsoft accomodate me/us, please? :)
Andrew*
P.S. I was advised to come for help here from
http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-x64-cant-readinstall-any-printer-drivers/4e7d06e1-33a5-4597-be70-4fdc087a63a7?msgId=9a045994-0d31-4d40-b17d-dba372393ee4

I have my HP 855c/driver working on Win 7 Ultimate x64. I used the 'printui /s' procedure and 4 files described above with some minor changes.
I pulled WindowsServer2003.WindowsXP-KB914961-SP2-x64-ENU.exe down from the Microsoft website. Running the file causes the exe to unpack into a temp folder at the root drive. A 'Setup Error' message box is displayed once the file is run. I left this
message box up until I copied ntprint.inf, ntprint.cat, and sp2.cab from the temp folder.
I copied driver.cab from a Windows XP Pro disc. I also needed amd64\stdnames.gpd which was already in my Windows 7 c:\windows\system32\spool\drivers\x64\3 folder.
I created a folder with the 5 files (ntprint.inf, ntprint.cat, sp2.cab, driver.cab, and amd64\stdnames.gpd). This is my 'Have Disc' folder.
I followed the 'printui /s' instructions, first changing the permissions mentioned above and then installing the driver. Next I followed the instructions to add a printer from Control Panel 'Devices and Printers' - 'Add Printer', choosing to 'use an existing
driver' when installing the HP 855c.
I used a slightly different ntprint.inf, size 1570418. The readable contents of ntprint.inf is as follows. Notice the line 'CatalogFile=ntprint.cat' is not included. I tried using the 1570468 version of ntprint.inf; when I did I received an incompatibility
message (probably the same one mentioned above).
; NTPRINT.INF (for Windows Server 2003 family)
; List of supported printers, manufacturers
[Version]
Signature="$Windows NT$"
Provider=%MS%
; LayoutFile=layout.inf
ClassGUID={4D36E979-E325-11CE-BFC1-08002BE10318}
Class=Printer
DriverVer=10/01/2002,5.2.3790.4533
[ClassInstall32.NT]
AddReg=printer_class_addreg
[printer_class_addreg]
HKR,,,,%PrinterClassName%
HKR,,Icon,,"-4"
HKR,,Installer32,,"ntprint.dll,ClassInstall32"
HKR,,NoDisplayClass,,1
HKR,,EnumPropPages32,,"printui.dll,PrinterPropPageProvider"
Good luck

Laserjet CP2025 share issue (64-bit drivers from Windows Server 2003 32-bit).

Hi,
We are migrating our Desktops from XP 32-bit to Windows 7 64-Bit and I'm trying to update all of our printer drivers on our Print Server (Windows server 2003 32 Bit).
I am adding the new drivers by opening up each printers properties on the print server, going to Sharing and then add new driver and directing it to the relevant folder for the 64-bit drivers for the printer.
Every printer (HP, Panasonic, Brother) has worked so far, except for the HP Laserjet CP2025. The Net Express installer doesn't work. Nor do the Universal Printing Drivers (PLC 6). Does anyone know a way around this?
Thank you.

Can anyone help with this? I'm in a difficult position with this. Any help would be appreciated.

HELP! Oracle 9i on Windows Server 2003

Hi, if I go to download the 9.0.2.1.0 release 2 of Oracle 9i for Windows Server 2003 there is only a patch and another small zip file, and not the full 3 Disk zip files? Then if you read the release notes under the zip links it points to the 9.0.2.1.0 release 2 of Oracle 9i for Windows 2000/XP? And then talks about applying some patches...
Can someone confirm that I do need to install the 9.0.2.1.0 release 2 of Oracle 9i for Windows 2000/XP on the Windows 2003 Server and then apply these patches?
TIA

This is the release option for the Windows 2003 Server:
Oracle9i Database Release 2 Enterprise/Standard/Personal/Client Edition
for Windows Server 2003 (32-bit)
but like I mentioned above it only has a patch and another small zip file which is obviously not the complete Oracle9i database:
Here is the link to the release notes:
http://www.oracle.com/technology/software/products/oracle9i/htdocs/win2k3soft.html

Is there a limit for SGA_MAX_SIZE on windows Server 2003 Standard Edition

I have a 9.2.0.8 Standard Edition running on windows Server 2003 Standard Edition. I cannot set SGA_MAX_SIZE to more than 1.7G. I have total of 3G RAM on that machine.

In order to use memory over 4 GB the /PAE flag must be set and Oracle must be tuned
accordingly. As mentioned above, for using memory over 4 GB and less than 16 GB, the
/3GB flag can be set as well. Oracle uses memory above 4 GB by taking advantage of
the AWE (Address Windowing Extension) feature built into Windows 2000, Windows
2003 and Windows XP.
In order to use this memory, the Oracle administrator account (either LocalSystem or the
domain user that installed Oracle) must have the “Lock memory pages” privilege set. In
addition the AWE_WINDOW_MEMORY parameter must also be created and set. This
parameter specifies how much of the 3 GB virtual memory space allocated to Oracle
should be used for mapping database buffers. The default value of 1GB should be
sufficient and increasing this value could be detrimental, since you only have 3 GB of
virtual memory to use. The higher the value of AWE_WINDOW_MEMORY that you
have set, the more likely it is that you will experience user memory issues. Start with the
default value of 1 GB and tune upwards only if you need to.
Once these steps have been completed, larger memory can be set by configuring
DB_BLOCK_SIZE and DB_BLOCK_BUFFERS initialization parameters. When using
Very Large Memory (VLM) you should use DB_BLOCK_BUFFERS rather than
DB_CACHE_SIZE in order to configure memory.

Adding Windows 7 x64 drivers to Windows Server 2003 printserver

Hello,
I've recently added a HP Elitebook 8530W running Windows 7 64 bit, to a network containing only 32 bit systems.
It's all working fine except I cannot get the printer, a HP Laserjet 4345MX, shared via a HP ML350 server running Windows Server 2003 SP2, working on it.
I have downloaded the appropriate Windows 7 x64 drivers from the HP website (the PCL6 v5.2 package) and tried adding these on the server (through printer properties, sharing, additional drivers, under the x64 box), but it is refusing to accept these drivers (I've tried every .inf in the package).
If anyone could offer any advice on how to get this setup working that'd be great, thanks
Marijn

Hello,
I've recently added a HP Elitebook 8530W running Windows 7 64 bit, to a network containing only 32 bit systems.
It's all working fine except I cannot get the printer, a HP Laserjet 4345MX, shared via a HP ML350 server running Windows Server 2003 SP2, working on it.
I have downloaded the appropriate Windows 7 x64 drivers from the HP website (the PCL6 v5.2 package) and tried adding these on the server (through printer properties, sharing, additional drivers, under the x64 box), but it is refusing to accept these drivers (I've tried every .inf in the package).
If anyone could offer any advice on how to get this setup working that'd be great, thanks
Marijn

HT201302 Would there be any need for drivers in Windows 8.1 so that the Iphone 5 can show up on the computer device view?

Apple Iphone 5 transfer to and from computer on a Windows 8.1 64 bit machine? Do I need to download a driver so that the computer will recognize the device?

Hi,
For Visual Basic 6 questions, read the post at the following address
http://social.msdn.microsoft.com/Forums/en-US/vbgeneral/thread/6a0719fe-14af-47f7-9f51-a8ea2b9c8d6b
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Kate Li
TechNet Community Support

Any trace we can turn on to help PD for IIS running Windows Server Standard 2008 R2 64 bit?

According to the IIS log, there is one occasion that the IIS response to client is lagged fo 9 seconds. It results client application timeout and eventually transaction faile. We do not observe any server performance issue. In fact there is no special
event log around few minutes of the incident timestamp.
Any trace we can turn on to help PD?

Hi,
The issue is related to IIS, I suggest you ask for help from IIS forum for better and accurate answer to the question.
http://forums.iis.net
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Help needed for high res windows compatible

Hi guys,
Could really do with some help. I'm failry new to video editing and I have been asked to supply a high res movie that is compatible in windows. Are there any settings in Compressor that allow you to do this? My movie is currently in FCP 6, its 1440 x 1080.
If there is a setting that allows a high res format in both mac and windows, that would be even better!
Any help would be appreciated!

H.264 with the data between 1500 and 2000 should give you great results.
Unless the PC people don't have QT this should never be an issue.
If people don't need full res you may want to go down to 1280x720.
If your show was really long file size could become an issue but a 10 minute show with AAC 128 audio should come in under 100MB at 1280x720.

Windows Server 2003 drivers for Lenovo Essential B590

Hello, all!
I need to install a Windows Server 2003 on a Lenovo Essential B590 laptop.
Can anyone confirm there are drivers available for this OS? [see specs bellow]
Thank you for any help!
P.
Intel Pentium Processor 2020M (2M Cache, 2.40 GHz), 15.6 HD(1366x768) AntiGlare, 4GB DDR3 1600MHz(1 DIMM), 1TB / 5400rpm, Intel HD Graphics, DVD-RW, webcam 720p, NON-INTEL 1X1 BGN+BT4.0, Fingerprint Reader, Battery 6 Cell 2.2A, VGA, HDMI, 2 USB 3.0, 2 USB 2.0, 4-in-1 card reader.

Toshiba has never supported mobile computers for any version of Microsoft Servers and never offered any driver for it.
I can understand you need it but with this you are on your own but you can try to install WXP drivers but I think Satellite A500 is not even WXP supported.
It wont be easy job for you.

Migrating From Window Server 2003 to Window Server 2012 for Web server deployment and Developmemt Machine is on Window Server 2008

Hi Microsoft Team,
We need your urgent advice and that is also on priority:
Issue Description: We need to migrate from
WINDOW SERVER 2003 to WINDOW SERVER 2012 while the development activity will be carried
under WINDOW SERVER 2008 as DEVELOPMENT BOX.
.NET Framework Version: 3.5 ( For both DEVLOPMENT(WINDOW SERVER 2008) and WEBSERVER(to WINDOW SERVER 2012))
IIS Version: 7.5 (For both DEVLOPMENT(WINDOW SERVER 2008) and WEBSERVER(to WINDOW SERVER 2012))
Need your quick advice Is that configuration feasible for Development and
Deployment (Web Server).
Highly appreciate your response as this will depend which product we need to buy also if you feel any showstopper or concern. Please let us know.

Hi,
As suggested by Tim, in order to get better assistance, we can ask for help in the following IIS forum.
IIS Forum
http://forums.iis.net/
In addition, regarding migrating from Windows Server 2003 to Windows Server 2012, the following blog can be referred to for more information.
Step-By-Step: Active Directory Migration from Windows Server 2003 to Windows Server 2012
http://blogs.technet.com/b/canitpro/archive/2013/05/27/step-by-step-active-directory-migration-from-windows-server-2003-to-windows-server-2012.aspx
Best regards,
Frank Shen

Windows Server 2003 and Microsoft Assessment and Planning tool (MAP)

Preparing for the end of support for Windows Server 2003 (4/2015) and the need to migrate from Windows Server 2003, I have been directed on several sites run the Microsoft Assessment
and Planning tool (MAP) to aid in identifying any software and hardware issues. Apparently this tool has been recently updated (7/2014) and cannot be installed on a Windows Server 2003 system. As it requires .NET Framework 4.5 to run. Unfortunately,
.NET Framework 4.5 cannot be installed on a Windows Server 2003 as it only supports .NET 4.0.x versions. All older version links to the MAP tool have been updated to link directly to version 9.1. Where can I get a MAP tool version that will run
on Windows Server 2003?

Hi,
Yes, i would agree with arnavsharma
After the environment scan has been completed in Windows Server 2008r2 or another supported OS, MAP looks at computers running earlier versions of Windows.
http://technet.microsoft.com/en-us/magazine/ee677580.aspx
Meanwhile, for the MAP related issue, you'd better ask in MAP forums:
https://social.technet.microsoft.com/Forums/en-US/home?forum=map
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Install NetWeaver CE 7.1 on Windows Server 2003 32bit, Oracle database

Hi,
It is possible install NW CE 7.1 for Oracle on Windows Server 2003 32 bit ?
I have installed NW 2004s on Windows Server 2003 platform, and I need install CE 7.1 and then ESR.
I have downloaded CE and ESR 7.1 installs from "SAP Installations & Upgrades" location (DVD number 51033843), but it is only 64 bit version.
Thank you
BB

Yes - because successor releases of Netweaver 7.0 are only available as 64bit. 32bit platfomrs are no more available.
Markus

Windows Server 2003 R2 x64 ISO

Bryan -
I'm not sure that replacing the card is an option. It's of the age where the card and the drive cage mate up. I'm not just attaching the drives directly to the controller card.
However..since it's Adaptec, they may well have a working Linux driver. Linux isn't something we deal with much at all in our shop, or any of the shops we interact with.
--Michael

The hardware is pretty much ancient. You won't get drivers for that card.Windows Server 2003 R2 Standard Edition with SP2 Trial (32-bit x86)disk1:http://download.microsoft.com/download/5/1/C/51C53A00-7F8B-423C-A841-8B9C49B910BF/X13-04874.imgdisk2:http://download.microsoft.com/download/5/1/C/51C53A00-7F8B-423C-A841-8B9C49B910BF/X13-04795.imgWindows Server 2003 R2 Standard Edition x64 with SP2 Trial (64-bit x64)disk1:http://download.microsoft.com/download/F/9/D/F9DA93F8-2814-4B9B-A6A1-EA9B6B7E8BD6/X13-05825.imgdisk2:http://download.microsoft.com/download/F/9/D/F9DA93F8-2814-4B9B-A6A1-EA9B6B7E8BD6/X13-05774.imgUse 2003 at your own risk. End of life this month, etc.

Auto rollback with no error when upgrading windows server 2003 sp2 to windows server 2008 R2

Hi, I have a server needs to upgrade from windows server 2003 sp2 to windows server 2008 r2.
It should be supported from technet site
And yes, it went through all the list of upgrade. After rebooted, it told me "the upgrade was not successful, Your previous version of windows is being restored. Do not restart your computer during this time.".
Is there a place located the upgrade failure log? What's the common cause about the auto roll back?

Thanks for the reply.
I copied some sentences in Setuperr.log
2014-07-10 23:58:33, Error
Failed to find driver file path. Error=00000002x[gle=0x80092004]
2014-07-10 23:58:45, Error      [0x0805e6] MIG    File 'C:\WINDOWS\SysWOW64\cpqteam.cnt' is unsigned! (Failed with error code 0x2 (2): Failed with error code 0x2 (2): Failed with )[gle=0x00000490]
2014-07-10 23:58:45, Error      [0x0805e6] MIG    File 'C:\WINDOWS\SysWOW64\cpqteam.hlp' is unsigned! (Failed with error code 0x2 (2): Failed with error code 0x2 (2): Failed with )[gle=0x00000490]
2014-07-11 00:06:19, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll,
{8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
2014-07-11 00:06:20, Error      [0x08085e] MIG    UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll]
does not exist.[gle=0x00000003]
2014-07-11 00:13:58, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll,
{743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
2014-07-11 00:18:56, Error      [0x0803db] MIG    IndirectKeyMapper: Cannot find the currently loaded location for hive X:\Documents and Settings\####\NTUSER.DAT; giving up (2).[gle=0x00000003]
2014-07-11 00:30:58, Error                 SYSPRP SPPNP: Error 0x25 (CONFIGRET) occurred while determining the buffer size needed to hold the list of devices that are using service
usbhub20.
2014-07-11 00:30:58, Error                 SYSPRP SPPNP: Error 0x424 occurred while opening a handle to the service usbhub20.[gle=0x00000424]
2014-07-11 00:38:08, Error      [0x080973] MIG    Ignoring apply for object: C:\WINDOWS\Panther\setupact.log[gle=0x000003f0]
2014-07-11 00:38:08, Error      [0x080973] MIG    Ignoring apply for object: C:\WINDOWS\Panther\setuperr.log[gle=0x000003f0]
Is it caused by driver error, MediaPlayer-DLMigPlugin.dll
and drmmgrtn.dll?

Help need for drivers on windows server 2003

Similar Messages

Maybe you are looking for