Help need for placement of firewalls at the core design
Hello all,
I am planning to implement edge and core firewalls in the datacenter. We have 2 core Nexus 7Ks which does layer 3 routing for core for our internal vlans. Our edge firewall are connected directly to Nexus core. This should provide the north to south traffic protection. All our servers are running on VMware installed on UCS. UCS is connected through nexus 5ks. Some standalone devices/servers are connected through 2ks. Most of the stuff is on vmware. I want to implement core firewalls but confused a little bit about where to place the firewalls in the network. Basic idea is to have seperation between the 3 tiers application, web and database for compliance and secuirty purposes. Basically while researching on the net I got 2 options to go,
1. Have 2 firewwall in active/standby connected to nexus5k at transparent mode and trunk all the vlan traffic which needs to be inspected.These will be different from the edge firewalls. This will be for east to west traffic.
2. Implement VSG and ASA1000v since both are complementary to each other and should have nexus 1000v to implement it.
Please help me to decide which way to go in terms of scaling the network.
forgot to add the screen shots here they are
File Receiver Channel
In Second ICO : I have configured the sender FileChannel as below
This file sender channel will pick the file based on the trigger file concept . if abc.trg then pick the mainpaylaod with extension abc.xml .
Similar Messages
-
help needed for writing query
i have the following tables(with data) as mentioned below
FK*-foregin key (SUBJECTS)
FK**-foregin key (COMBINATION)
1)SUBJECTS(table name)
SUB_ID(NUMBER) SUB_CODE(VARCHAR2) SUB_NAME (VARCHAR2)
2 02 Computer Science
3 03 Physics
4 04 Chemistry
5 05 Mathematics
7 07 Commerce
8 08 Computer Applications
9 09 Biology
2)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2) SUB_ID1(NUMBER(FK*)) SUB_ID2(NUMBER(FK*)) SUB_ID3(NUMBER(FK*)) SUBJ_ID4(NUMBER(FK*))
383 S1 9 4 2 3
384 S2 4 2 5 3
---------I actually designed the ABOVE table also like this
3) a)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2)
383 S1
384 S2
b)COMBINATION_DET
COMBDET_ID(NUMBER) COMB_ID(FK**) SUB_ID(FK*)
1 383 9
2 383 4
3 383 2
4 383 3
5 384 4
6 384 2
7 384 5
8 384 3
Business rule: a combination consists of a maximum of 4 subjects (must contain)
and the user is less relevant to a COMB_NAME(name of combinations) but user need
the subjects contained in combinations
i need the following output
COMB_ID COMB_NAME SUBJECT1 SUBJECT2 SUBJECT3 SUBJECT4
383 S1 Biology Chemistry Computer Science Physics
384 S2 Chemistry Computer Science Mathematics Physics
or even this is enough(what i actually needed)
COMB_ID subjects
383 Biology,Chemistry,Computer Science,Physics
384 Chemistry,Computer Science,Mathematics,Physics
you can use any of the COMBINATION table(either (2) or (3))
and i want to know
1)which design is good in this case
(i think SUB_ID1,SUB_ID2,SUB_ID3,SUB_ID4 is not a
good method to link with same table but if 4 subjects only(and must) comes
detail table is not neccessary )
now i am achieving the result by program-coding in C# after getting the rows from oracle
i am using oracle 9i (also ODP.NET)
i want to know how can i get the result in the stored procedure itsef.
2)how it could be designed in any other way.
any help/suggestion is welcome
thanks for your time --PradeeshWell I forgot the table-alias, here now with:
SELECT C.COMB_ID
, C.COMB_NAME
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID1) AS SUBJECT_NAME1
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID2) AS SUBJECT_NAME2
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID3) AS SUBJECT_NAME3
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID4) AS SUBJECT_NAME4
FROM COMBINATION C;
As you need exactly 4 subjects, the columns-solution is just fine I would say. -
Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with re
Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with reddish cast and loss of detail
System: Windows 7
Adobe CS5
Printer: Epson Stylus Photo 1400
Paper: Inkjet matte presentation paper with slight luster
Installed latest patch for Adobe CS5
Epson driver up to date
After reading solutions online and trying them for my settings for 2 days I am still unable to print what I am seeing on my screen in Adobe CS5. I calibrated my monitor, but am not sure once calibration is saved if I somehow use this setting in Photoshop’s color management.
The files I am printing are photographs of dogs with lots of detail I digitally painted with my Wacom tablet in Photoshop CS5 and then printed with Epson Stylus 1400 on inkjet paper 20lb with slight luster.
My Printed images lose a lot of the detail & come out way to dark with a reddish cast and loss of detail when I used these settings in the printing window:
Color Handling: Photoshop manages color, Color management -ICM, OFF no color adjustment.
When I change to these settings in printer window: Color Handling: Printer manages color. Color management- Color Controls, 1.8 Gamma and choose Epson Standard it prints lighter, but with reddish cast and very little detail and this is the best setting I have used so far.
Based on what I have read on line, I think the issue is mainly to do with what controls are set in the Photoshop Color Settings window and the Epson Printer preferences. I have screen images attached of these windows and would appreciate knowing what you recommend I enter for each choice.
Also I am confused as to what ICM color management system to use with this printer and CS5:
What is the best ICM to use with PS CS5 & the Epson 1400 printer? Should I use the same ICM for both?
Do I embed the ICM I choose into the new files I create?
Do I view all files in the CS5 workspace in this default ICM?
Do I set my monitor setting to the same ICM?
If new file opens in CS5 workspace and it has a different embedded profile than my workspace, do I convert it?
Do I set my printer, Monitor and PS CS5 color settings to the same ICM?
Is using the same ICM for all devices what is called a consistent workflow?
I appreciate any and all advice that can be sent my way on this complicated issue. Thank you in advance for your time and kind help.It may be possible to figure out by watching a Dr.Brown video on the subject of color printing. Adobe tv
I hope this may help............... -
File missing (file\BCD error code 0Xc0000034 help need for work!
file missing (file\BCD error code 0Xc0000034 help need for work! what can i do?
have an p 2000 notebook pcHi bobkunkle, welcome to the HP Forums. I understand you cannot boot passed the error you are receiving.
What is the model or product number of your notebook? What version of Windows is installed?
Guide to finding your product number
Which Windows operating system am I running?
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
BAdI needed for transfer order split with the maxi.of 5 item level
Hi,
BAdI needed for transfer order split with the maximum of 5 item level.
If a transfer order contains 12 item level, three separate transfer order should be created with item level 5,5 and 2.
This transfer order is for the material which bound to flow to production from warehouse.
Can anyone explain the step by step procedure to implement this BAdI?
It would be great if the procedure is for New BAdI.
Thanks.http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/63ee7f486cc143a560799d8803ce29/content.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/srm/badi-general+information&
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
The specified item was not found.
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
http://www.allsaplinks.com/badi.html
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3430https [original link is broken] [original link is broken] [original link is broken]:///people/alwin.vandeput2/blog/2006/04/13/how-to-search-for-badis-trace-it
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework /people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://www.esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt -
Help need for force to signout All session ! how...
hi
help need for force to signout All session ! how ??
Solved!
Go to Solution.Hi and welcome to the Skype Community,
To force a signout of all instances your Skype is signed into please change your password: https://support.skype.com/en/faq/FA95/how-do-i-change-my-password
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓ -
What is the need for setting property data inside the JMSMesage
Hi
Could anybody please let me know
*What is the need for setting property data inside the JMSMesage??
For example i have a seen a similar example as shown ??
I have seen a
Message.setStringProperty("Sport","Basketball");
and also please tell me how can the MDB recievies this property data ??
Thanks in advance .raviprivate wrote:
Could anybody please let me know
*What is the need for setting property data inside the JMSMesage??
For example i have a seen a similar example as shown ??
I have seen a
Message.setStringProperty("Sport","Basketball"); Look at the detail JMS documentation on [Message Properties|http://java.sun.com/j2ee/sdk_1.3/techdocs/api/javax/jms/Message.html] .
>
and also please tell me how can the MDB recievies this property data ?? MDB onMessage method argument is the Message object and if you look at the documentation, Message interface has getter methods to retrieve the properties. -
What permission is needed for a login to access the restored database(backup from different server)
what permission is needed for a login to access the restored database(backup from different server)
frequently reach the situation, when vendor restores a database, but he cannot access it unless I remap or add his login to the restored database. What permssion can grant the vendor so that he can but only can access the database he restored, not all other
databases.Hi George,
According to your description, When you move a database from one server that is running SQL Server to another server that is running SQL Server, a mismatch may occur between the security identification numbers (SIDs) of the logins in the master database
and the users in the user database. As other post, you can use the sp_change_users_login stored procedure to map SQL Server logins. Also , you can use the following statement after doing the restore database. It will
fix the mis-mapped SID inside the restored DB.
ALTER USER <username> WITH LOGIN = <username>
For more information, you can review the following article.
http://blogs.lessthandot.com/index.php/DataMgmt/DBAdmin/MSSQLServerAdmin/do-you-still-use-sp_change_users_login/
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support -
My client has a website up and running. He had me redesign it in Muse. What do I need and how do I publish the new design to his host/server?
Hi Jefffrey
I believe your query is answered in live chat.
Please feel free to contact us again.
Thanks,
Sanjit -
Hi everyone ☺
I’m finally planning to start recording what I play, and after some hours of wandering on the web I found some interesting possibilities. Now what I need is to decide which one is more suitable for my needs, and here comes the moment for apple discussions
Basically, I will record my own music one track/instrument at a time (I’m still not able to play more than one…and I dont’ want to spend 2.000$ to buy a 24-ins device just to record drum tracks), I’d like to have a software with built-in effects for guitar/bass/voice, integrated soundtrack possibilities (to play with video recordings), mixing options for both stereo and surround mixing, and I don’t want any card to be placed into my mac. Well, and obviously the sound quality must be pro-like…as anyone probably wants.
So, here’s what I came up with:
a) getting logic pro studio 8 and apogee duet
b) getting pro tools m-powered and mbox 2
c) getting one of the two softwares and a Monster iStudioLink Instrument cable and plug instruments directly into the mac
Now, the questions are:
if I can plug an instrument directly into my mac and control all parameters via one of the two softwares, what do tools like duet and mbox2 serve for?
In the case this tools are useful [ ☺ ], why ☺ … and which is the couple software/hardware that can best suit my needs?
I assume that every software has a proprietary file extension in which audio tracks are saved, so that it should be impossible to record an audio track with one software and edit it with another that has different functions/plugins (ex. from logic to pro tools, from pro tools to cakewalk sonar which I have on a pc etc.). Am I right, or is there any “standard”, non compressed high quality file type in which track can be saved and exported to be edited with different softwares?
I know that from this post it may easily seem that I’m a hopeless digital idiot, but I swear the situation is not really that bad so no need for the kind of explanations with drawings like the ones you find in the “for dummies” guides lol so every experts’ advice will be greatly appreciated
NeptuneThank you Bee Jay and Pancenter for the lighting-fast and useful answers
now I am aware that an interface IS NEEDED lol (that means they are not produced without a reasons, are they?). I know Pro Tools is the industry standard but I don't like anyone/anything to tie me to their choices/interests (so that's why I was asking about Pro Tools, knowing that there's some sort of "hardware threat"). What I look for is just quality and if I understood what you both mean, as far as this aspect is concerned, Logic and Pro Tools are substantially comparable...isn't it? On the interfaces side, I already checked the Saffire ones (they seem quite good, and cross-platform use is definitely a plus), I will check the others mentioned and will let you know In fact, I didn't consider the "platform problem" but, as I wrote, I also own a PC with an Audigy 2 soundcard (midi/analog/optical/digital inputs/outputs and firewire port...not Madonna's private studio, but not as sad as Mac's little hole) and Sonar 6 Producer Edition, so that has been a really good point to ponder. And now, in the middle of this software/hardware battle...any personal suggestions based on tests/personal experience? -
Ideas or help needed for a simple, robust pluggable framework
Hi all,
Having written a fairly decent plugin engine, similar in concept to the Eclipse plugin engine, although at a more generic scale, I am looking for any possible ideas for a Java Swing framework that is built around the engine, with the concept of using a framework that is built on mostly plugins. My engine handles, or will soon handle, a number of features to make the engine robust enough, yet still easy enough, to use for just about any purpose.
The engine is pretty simple, although with a bit more work I feel will be overall a pretty robust and powerful plugin engine. Each plugin is made up of one or more "services". A plugin is a .jar file that contains a plugin-conf.xml config file, the classes that implement the Service interface, and any supporting classes. The "plugin" is really the package of one or more services and supporting classes. The engine will handle the ability to work with expanded dir structures as well, so that the build process doesn't have to create .jar files on every build of a plugin. The engine has built in support to load, unload and reload a plugin at runtime. This helps during development by allowing auto-reload of a plugin service without having to restart the app. The engine has the ability to "watch" URLs in a separate thread (still working on this), and at given intervals if a change occurs to any plugin, that plugin is reloaded. This is configurable on a per plugin basis in the config file.
Every plugin .jar file gets its own classloader instance. Because of the nature of a framework that may rely heavily on plugins, it will be very common to have plugin dependencies, where a plugin service may rely on one or more other plugin services. The dependencies are configured in the plugin-conf.xml file, and the engine resolves these when the plugin is loaded, automatically. Once all plugins have been loaded, an "init" call is made that then goes and resolves all plugin service dependencies, setting up the behind the scenes work to make sure any service can use any other service it defines to depend on. Another area is plugin versions. There will no doubt be a time when some sort of application may have legacy plugins, but also have newer plugins. For example, an application built on a "core" set of plugins, may eventually update the core plugins with newer versions. The engine allows the "old" plugins to exist and work while new versions of the same plugins may be loaded and working at the same time. This allows older plugins that depend on the old set of core plugins to work, while newer plugins that depend on the new core plugins may work also. Any plugin may depend on one or more services specified by specific versions, or a range of versions.
Plugin services can define to be created when first loaded, or lazy instantiated. Ideally, an application would opt for lazy instantiation until a plugin is needed. For example, a number of plugins may need to add menu items or buttons that would trigger its service. The plugin does not actually need to be created until the menu or button is clicked on. There is one BIG problem with how this engine works though. Unlike the Eclipse (and other) engines where the config file defines the menu item(s), buttons, etc in an xml sort of language, this engine is built for generic use, and therefore is not specific to menu items or buttons triggering a service instantiation. Therefore, a little "hack" is required. A specific plugin that is created when first loaded will be required to set up all the menu items for specific plugins, then handle the actionPerformed() call to instruct the engine to create the service. The next step would be for the plugin service to add its own handler to the specific menu item it depends on, and remove the "old" handler the startup plugin added to it to handle the initial click. Another thought just struck me though. Because the engine must use an XML parser to load every plugin-conf.xml file, it might be possible to "extend" the parsing routine, where by an extending class could be added to the engine to parse plugin-conf.xml files. First the plugin engines own routine would parse it. Then, the extending class could parse for any extra plugin-conf.xml info, such as menu item settings, and directly set up the menu items and handlers in this manner. I will probably include this ability directly in the engine soon anyway, so that nobody else has to do this, but this is one area I would appreciate some feedback on.
Anyway, so that is the jist of the engine. There is more to it under the hood, but that sums up a good part of it. Now, the pluggable framework, much like what the "shell" of eclipse, forte and so forth offer, is built around my engine to make it very easy to build Swing applications with a pluggable framework underneath. The idea is to package up a startup main class that is configurable, a number of useful plugins that other plugins could depend on, such as an Outlook layout, menuing, toolbars, drag/drop, history, undo/redo, macro record, open/save/search/find/replace dialogs, and so forth. This isn't just for an IDE though. The developer using the framework could deploy the basic app with the plugins of his/her choice, and add to it with his/her own plugins.
Soooo, after this long post, what I am getting at is if anyone would be interested in helping out with ideas, feedback, testing, core framework plugins, and so forth. At this time I am keeping the code closed, but will probably public domain it, open source it, or whatever. The finished framework should make it easy for anyone to quickly build useable applications, and if all goes well, I'd like to set up a site with a location for 3rd party plugins to be uploaded, for download, comments, etc. Being a web developer, I myself will probably work on some plugins for Web Services, web stress testing, and so forth. I have lots of ideas for useable plugins.
On that note, one application I am personally working on for my own use, is a simple yet possibly robust internet suite of apps. I want to incorporate FTP, Email, NewsGroup, and IRC/AOL IM/Yahoo IM/MSN IM/ICQ chat into a single app. Every aspect of it would be plugins. Frankly, I hate outlook, Eudora is alright, but I want to do some things with the email app. I also want a single IM/Chat app that can talk with all protocols (not an easy task, take a look at GAIM). Newsgroups are handy to work with for developers and others of interest, as is FTP. But even more so, being able to have all in one big application framework that allows them to share data between each other, work with one another, and so forth is appealing to me, and being written in Java it could potentially work on many platforms, giving some platforms a possible nice set of internet apps to use. Being able to send an email to a mailing list AND have it posted to specific newsgroups at the same time without having to copy/paste, open up separate applications and so forth has appeal. Directly emailing from any chat or newsgroup link without another app starting up is a little faster as well. Those are just "small" things that could prove to be very kewl in a complete internet app. Adding a web browser, well, I don't think I want to go that route. But if there is already a decent Java built web browser, it shouldn't be too hard to add it as a plugin.
So, if anyone is interested, by all means, drop a post to this thread, let me know of interest, feedback, ideas, point out bad things, and so forth. I appreciate all forms of communication.
Thanks.Yes I do. I am using it now with my work related project.
I am in fact reworking the engine a bit now. I want to incorporate the notion of services (like OSGi) where by a plugin can register services. These services are "global" in scope, meaning any plugin may request the use of a service. However, services, unlike plugins, are not guaranteed to be available. Therefore, plugins using services must be coded to properly handle this possibility. As an example, imagine an email application using my engine. One plugin may provide the email gateway, including the javamail .jar library and provide the email service. Other plugins, such as the one that provides the functionality for the SEND button, would "use" this service. At runtime, when the send button was pressed it would ask the engine for the email service. If available, off goes the email. If not, it could pop up a dialog indicating some sort of message that the email service is not available.
I am at the VERY beginning stages in this direction so I'd love to have ideas, thoughts, suggestions as to how this might be implemented. I do believe though that it will provide for a more powerful engine. The nice thing is, while the engine will support static runtime plugins, it will also support dynamic services that can come and go during the runtime. The key is that plugins using services do not maintain references to them, but instead query the engine each time a plugin needs to use a service.
Static plugins are those that are guaranteed to be available or if not, any dependent plugin is not allowed to load. That is, if A depends on B and B is not able to be loaded, A is unloaded as well as it can't perform its job without B; it depends on B in some manner to complete its function. Imagine a plugin adding an option panel to the Preferences page only that the Preferences plugin is not loaded. It just can't work. However, with some work, there could be variations on this. That is, a plugin may provide a menu item as well as a preferences page. If the preference plugin is not available, then the plugin may simply still work via the menu item, but have no preferences panel available. This should be configurable via the plugin-conf.xml config file. However, as I have it now, using extension points and extensions like Eclipse does, it is also possible that if the Preferences plugin isn't loaded, it wont look for ANY extensions extending its extensino point, and therefore the plugins could all still run but there would simply be no preferences page. So, I am not entirely sure yet which way is best for this to work.
My engine, as it stands now, allows for separate classloader plugin loading, it automatically resolves all dependencies by creating the plugin registry each time the engine is started up. To speed up plugin loading, it maintains a plugins.xml file in the root dir that keeps track of each plugin that was loaded and its last timestamp. Plugins can be open directory files or jarred up into .PAR files (think .WAR or .EAR files). The engine can find .par or open-dir plugins in multiple locations (including URL locations for direct .par files). When it finds a .par file, it first decompresses the .par file to a plugin work directory. Every plugin must have a plugin-conf.xml in its root dir, and either a /classes dir where compiled classes are, or a .jar file in the root path of the plugin, where the /classes dir superscedes the .jar file. Alternatively, anything in a /lib dir is automatically picked up as part of the plugin classpath. So a plugin that wraps the xerces.jar file can simply place the xerces.jar in the /lib dir and automatically present the xerces library to all dependent plugins (which can import the xerces classes but not need to distribute the xerces.jar file if a plugin they depend on has it in its /lib dir). The "parent lookup" process goes only one parent level deep. That is, if plugin A depends on a class in a /lib/*.jar file in plugin B, then the engine will resolve the class (through delegation) of plugin B. But if A depends on B, B depends on C where plugin C's /lib/*.jar file contains a class A is looking to use, this will not work and A will throw a ClassNotFoundException. In other words, the parent lookup only goes as far as the classpath of all dependent plugins, not up the chain of all dependent plugins. Eclipse allows each plugin to "export" various classes, or packages, or entire .jar files and the lookup can go all the way up the chain if need be. I haven't yet found a big reason for supporting this, so I am not too concerned with that at this point. The engine does support reloadable plugins although I have not yet implemented it. Because each plugin information object is stored in a Map keyed on the plugins GUID (found in the plugin-conf.xml file), it is easy enough to load a new plugin (since they get their own classloader) and replace the object at the GUID key and now have a reloaded plugin. The harder part is properly notifying all dependent plugins of the reload and what to do with them. Therefore I have not quite yet implemented this feature although the first step can easily be done, so long as nobody minds the "remnants" of older plugins laying around and possibly not being garbage collected.
All of this works now, and I am using it. I do NOT have a generic UI framework just yet. I am working on that now. Eclipse has a very nice feature in that every plugin.xml file builds up the UI without any plugin code ever being created or ran. I am working on something like that now, although I am focussed more on the aspect of the engine at this point.
Two things keep me going. First, the shear fun of working on this and seeing it succeed, even if a little bit. Second, while I love the idea of Eclipse, OSGi and other engines, so far I have yet to find one that is very easy to write plugins for, is very small, and is "generic" enough for any use. Some may argue JBoss core, at 29K can do this. I don't know if it can. It is built around JMX and I don't know that I agree JMX is the "ultimate" core plugin engine for all types of apps. Not that mine is either, but I'd like to see what I am working on become that if possible. Currently, with an xml parser (www.xmlpull.org) added as part of the code, my engine is about 40K with debug info, maybe about 28K without. I expect it to grow a bit more with services, reloadable/unloadable code, and some other stuff. However, I am thinking it will still be around 50K in size and in my opinion, with an xml read/write parser (very fast one at that), extension/extensino points, services, dependencies, multiple versions of plugins (soon), load/unload/reload capabilities, .par management (unjar into work dir, download .par files from urls, etc) and open directory capabilities, inidividual classloaders, automatic dependency resolution, dynamic dependency resolution and possibly even more, I think what my engine offers (and will offer) is pretty cool in my book.
None the less, there is always room for improvement. One of the things I pride myself on is using as little code and keeping the code neat and easily readable, not to mention as non-archaic as possible, makes for an easily maintainable project.
So, having said all that, YES, the engine can be used as is right now. It does not reload plugins, but you can dynamically load plugins, handle dependency resolution, have a very fast xml read/write parser at your disposal for any plugin, and for the most part easily write plugins. That is all possible now. I should put the engine I have now up on my generic-plugin-engine sourceforge project one of these days, perhaps soon I will do that! While I have no problem handing out the code, I am currently the only committer and I don't have it loaded into CVS at this point. I would like to do so very soon.
So, if you are interested, by all means, let me know and I'll be happy to send you what I have, and love to have more help on the next version of this. -
Query help needed for querybuilder to use with lcm cli
Hi,
I had set up several queries to run with the lcm cli in order to back up personal folders, inboxes, etc. to lcmbiar files to use as backups. I have seen a few posts that are similar, but I have a specific question/concern.
I just recently had to reference one of these back ups only to find it was incomplete. Does the query used by the lcm cli also only pull the first 1000 rows? Is there a way to change this limit somwhere?
Also, since when importing this lcmbiar file for something 'generic' like 'all personal folders', pulls in WAY too much stuff, is there a better way to limit this? I am open to suggestions, but it would almost be better if I could create individual lcmbiar output files on a per user basis. This way, when/if I need to restore someone's personal folder contents, for example, I could find them by username and import just that lcmbiar file, as opposed to all 3000 of our users. I am not quite sure how to accomplish this...
Currently, with my limited windows scripting knowledge, I have set up a bat script to run each morning, that creates a 'runtime' properties file from a template, such that the lcmbiar file gets named uniquely for that day and its content. Then I call the lcm_cli using the proper command. The query within the properties file is currently very straightforward - select * from CI_INFOOBJECTS WHERE SI_ANCESTOR = 18.
To do what I want to do...
1) I'd first need a current list of usernames in a text file, that could be read (?) in and parsed to single out each user (remember we are talking about 3000) - not sure the best way to get this.
2) Then instead of just updating the the lcmbiar file name with a unique name as I do currently, I would also update the query (which would be different altogether): SELECT * from CI_INFOOBJECTS where SI_OWNER = '<username>' AND SI_ANCESTOR = 18.
In theory, that would grab everything owned by that user in their personal folder - right? and write it to its own lcmbiar file to a location I specify.
I just think chunking something like this is more effective and BO has no built in back up capability that already does this. We are on BO 4.0 SP7 right now, move to 4.1 SP4 over the summer.
Any thoughts on this would be much appreciated.
thanks,
MissyJust wanted to pass along that SAP Support pointed me to KBA 1969259 which had some good example queries in it (they were helping me with a concern I had over the lcmbiar file output, not with query design). I was able to tweak one of the sample queries in this KBA to give me more of what I was after...
SELECT TOP 10000 static, relationships, SI_PARENT_FOLDER_CUID, SI_OWNER, SI_PATH FROM CI_INFOOBJECTS,CI_APPOBJECTS,CI_SYSTEMOBJECTS WHERE (DESCENDENTS ("si_name='Folder Hierarchy'","si_name='<username>'"))
This exports inboxes, personal folders, categories, and roles, which is more than I was after, but still necessary to back up.. so in a way, it is actually better because I have one lcmbiar file per user - contains all their 'personal' objects.
So between narrowing down my set of users to only those who actually have saved things to their personal folder and now having a query that actually returns what I expect it to return, along with the help below for a job to clean up these excessive amounts of promotion jobs I am now creating... I am all set!
Hopefully this can help someone else too!
Thanks,
missy -
Hi,
i need to add coloums for the existing report which picks from G/L account.
in this report I need to add some more columns from COSP-KSTAR, which shows the cost element details from G/L account.
I need to restrict that cost element number according to the company code.
Plz see this and let me know the things.
1. I need to add FISCAL YEAR(COEP-GJAHR) in selection screen.
2. I need to add column: Employee Cost (CSKS-KOSTL)
3. add a column Staff Welfare (COSP-KSTAR) this is to restrict for the cost element 3000200 from G/L account
4. add a column Recruitment restrict for the cost element(COSP-KSTAR) 3100040 from G/L account
5. add a column Travels (suppressing some cost elements(COSP-KSTAR) and putting into Travels)
6. add a column Subcontracts restrict for the cost element (COSP-KSTAR)3100360 from G/L account
7. add a column Communication suppressing some cost elements and putting into Communication)
8. add a column Rent restrict for the cost element (COSP-KSTAR)3100055 from G/L account
9. add a column Back end Cost restrict for the cost element (COSP-KSTAR)3100065 from G/L account
i can hardcode these cost elements.
i did according to some of our sdn friends guidence but it is going to dump.
hear i am sending the code what i changed.
it is giving the error with the select.
SELECT BUKRS KOKRS gjahr kstar OBJNR OBJNR_N1 PERIO BEKNZ WKGBTR WOGBTR FROM
COEP INTO TABLE
IT_COEP FOR ALL ENTRIES IN IT_AUFK WHERE OBJNR = IT_AUFK-OBJNR and
perio in S_PERIO.
plz try to help me out in this issue.
hear i am sending the complete code what i worte.
*& Report ZPROJECT_PROFIT2
REPORT ZPROJECT_PROFIT2.
*********************MAIN DOCUMENTATION BLOCK*************************
Project Code :
Program Name :Zproject_profit1.
Purpose of program :This report will give the gross margin for a project as
*a whole based on some selected input criteria.
Author of program :JAYA KRISHNA .B.
INPUT/OUTPUT FILE :nil
TYPE-POOLS : SLIS."For ALV display.
TABLES : COEP, "CO Object: Line Items (by period).
AUFK, "Order master data.
csks, "Cost center master data
cosp. "CO Objects
*& Include ZSTRUCTURE
types: BEGIN OF TY_COEP , "structure of table COEP.
BUKRS LIKE COEP-BUKRS,
KOKRS LIKE COEP-KOKRS,
OBJNR LIKE COEP-OBJNR,
gjahr like coep-gjahr,
kstar like coep-kstar,
OBJNR_N1 LIKE COEP-OBJNR_N1,
PERIO LIKE COEP-PERIO,
BEKNZ LIKE COEP-BEKNZ,
WKGBTR LIKE COEP-WKGBTR,
WOGBTR LIKE COEP-WOGBTR,
BELNR LIKE COEP-BELNR,
END OF TY_COEP,
BEGIN OF TY_AUFK , "structure of table AUFK.
BUKRS LIKE AUFK-BUKRS,
KOKRS LIKE AUFK-KOKRS,
OBJNR LIKE AUFK-OBJNR,
KTEXT LIKE AUFK-KTEXT,
ANFAUFNR LIKE AUFK-ANFAUFNR,
AUFEX LIKE AUFK-AUFEX,
USER2 LIKE AUFK-USER2,
USER0 LIKE AUFK-USER0,
USER1 LIKE AUFK-USER1,
USER3 LIKE AUFK-USER3,
USER6 LIKE AUFK-USER6,
USER7 LIKE AUFK-USER7,
USER8 LIKE AUFK-USER8,
ABKRS(10) TYPE C,
USER9 LIKE AUFK-USER9,
AUFNR LIKE AUFK-AUFNR,
END OF TY_AUFK,
begin of ty_csks,
kokrs like csks-kokrs,
kostl like csks-kostl,
bukrs like csks-bukrs,
objnr like csks-objnr,
end of ty_csks.
DATA : BEGIN OF IT_COSP occurs 100,
OBJNR LIKE COSP-OBJNR,
GJAHR LIKE COSP-GJAHR,
KSTAR LIKE COSP-KSTAR,
END OF IT_COSP.
DATA : IT_COEP TYPE TABLE OF TY_COEP, " Declaraton of tables COEP and AUFK.
IT_AUFK TYPE TABLE OF TY_AUFK,
IT_CSKS TYPE TABLE OF TY_CSKS.
IT_COSP TYPE TABLE OF TY_COSP.
DATA : WA_COEP LIKE LINE OF IT_COEP, " Declaration of work areas for tables COEP and AUFK.
WA_AUFK LIKE LINE OF IT_AUFK,
WA_CSKS LIKE LINE OF IT_CSKS.
WA_COSP LIKE LINE OF IT_COSP.
DATA : BEGIN OF IT_DISPLAY OCCURS 0, " Declaration of display table.
OBJNR_N1 LIKE COEP-OBJNR_N1,
OBJNR_N12 LIKE COEP-OBJNR_N1,
KTEXT1 LIKE AUFK-KTEXT,
WKGBTR LIKE COEP-WKGBTR,
WOGBTR LIKE COEP-WOGBTR,
WKGBTR1 LIKE COEP-WTGBTR,
WOGBTR1 LIKE COEP-WOGBTR,
ADDK LIKE COEP-WOGBTR,
ADDO LIKE COEP-WOGBTR,
ADDK1 LIKE COEP-WOGBTR,
ADDO1 LIKE COEP-WOGBTR,
PROFIT1 LIKE COEP-WOGBTR,
PROFIT2 LIKE COEP-WOGBTR,
BEKNZ LIKE COEP-BEKNZ,
BUKRS LIKE AUFK-BUKRS,
anfaufnr LIKE AUFK-anfaufnr,
aufex like aufk-aufex,
OBJNR LIKE AUFK-OBJNR,
USER2 LIKE AUFK-USER2,
USER0 LIKE AUFK-USER0,
USER1 LIKE AUFK-USER1,
USER3 LIKE AUFK-USER3,
USER6 LIKE AUFK-USER6,
USER7 LIKE AUFK-USER7,
USER8 LIKE AUFK-USER8,
ABKRS LIKE AUFK-ABKRS,
USER9 LIKE AUFK-USER9,
PERIO LIKE COEP-PERIO,
AUFNR LIKE AUFK-AUFNR,
STR(5) TYPE C,
WORK(10) TYPE C,
END OF IT_DISPLAY,
: BEGIN OF IT_DISPLAY1 OCCURS 0, " Declaration of second display table.
OBJNR_N1 LIKE COEP-OBJNR_N1,
OBJNR_N12 LIKE COEP-OBJNR_N1,
KTEXT1 LIKE AUFK-KTEXT,
WKGBTR LIKE COEP-WKGBTR,
WOGBTR LIKE COEP-WOGBTR,
WKGBTR1 LIKE COEP-WTGBTR,
WOGBTR1 LIKE COEP-WOGBTR,
ADDK LIKE COEP-WOGBTR,
ADDO LIKE COEP-WOGBTR,
ADDK1 LIKE COEP-WOGBTR,
ADDO1 LIKE COEP-WOGBTR,
PROFIT1 LIKE COEP-WOGBTR,
PROFIT2 LIKE COEP-WOGBTR,
BEKNZ LIKE COEP-BEKNZ,
BUKRS LIKE AUFK-BUKRS,
anfaufnr like aufk-anfaufnr,
aufex like aufk-aufex,
OBJNR LIKE AUFK-OBJNR,
USER2 LIKE AUFK-USER2,
USER0 LIKE AUFK-USER0,
USER1 LIKE AUFK-USER1,
USER3 LIKE AUFK-USER3,
USER6 LIKE AUFK-USER6,
USER7 LIKE AUFK-USER7,
USER8 LIKE AUFK-USER8,
ABKRS LIKE AUFK-ABKRS,
USER9 LIKE AUFK-USER9,
PERIO LIKE COEP-PERIO,
AUFNR LIKE AUFK-AUFNR,
STR(5) TYPE C,
WORK(10) TYPE C,
END OF IT_DISPLAY1.
data : it_field type slis_fieldcat_alv, " Declaration of ALV variables
it_field_t type slis_t_fieldcat_alv,
xlayout TYPE slis_layout_alv.
data : it_event type slis_t_event,
wa_event like line of it_event.
DATA : WA_TOP TYPE SLIS_LISTHEADER,
IT_TOP TYPE SLIS_T_LISTHEADER.
data:w_lines type i,
w_occurs type i,
STR(5) TYPE C,
WORK(10) TYPE C.
constants : c_selection type char20 value 'Selection based on'. " Declaration of a constant.
selection-screen BEGIN OF BLOCK BLK WITH FRAME TITLE TEXT-000.
SELECT-OPTIONS S_BUKRS FOR AUFK-BUKRS OBLIGATORY.
SELECT-OPTIONS S_OBJNR FOR AUFK-AUFNR.
SELECT-OPTIONS S_ANF FOR AUFK-ANFAUFNR.
SELECT-OPTIONS S_AUFEX FOR AUFK-AUFEX.
SELECT-OPTIONS S_USER2 FOR AUFK-USER2.
SELECT-OPTIONS S_USER0 FOR AUFK-USER0.
SELECT-OPTIONS S_USER1 FOR AUFK-USER1.
SELECT-OPTIONS S_USER3 FOR AUFK-USER3.
SELECT-OPTIONS S_USER6 FOR AUFK-USER6.
SELECT-OPTIONS S_ABKRS FOR AUFK-ABKRS.
SELECT-options s_gjahr for coep-gjahr obligatory.
SELECT-OPTIONS S_PERIO FOR COEP-PERIO OBLIGATORY.
SELECTION-SCREEN END OF BLOCK BLK .
SELECTION-SCREEN BEGIN OF BLOCK BLK1 WITH FRAME TITLE TEXT-001.
PARAMETERS : ONSITE RADIOBUTTON GROUP RADI.
PARAMETERS : OFFSHORE RADIOBUTTON GROUP RADI.
PARAMETERS : BOTH RADIOBUTTON GROUP RADI.
SELECTION-SCREEN END OF BLOCK BLK1 .
start-of-selection.
*ZAUFK
" Selection of records from aufk to internal table.
IF ONSITE EQ 'X' .
SELECT
BUKRS
KOKRS
OBJNR
KTEXT
anfaufnr
aufex
USER2
USER0
USER1
USER3
USER6
USER7
USER8
ABKRS
USER9
AUFNR
FROM AUFK INTO TABLE IT_AUFK WHERE BUKRS IN S_BUKRS AND
anfaufnr IN s_anf AND
aufex in s_aufex and
aufnr IN S_OBJNR AND
USER2 IN S_USER2 AND
USER0 IN S_USER0 AND
USER1 IN S_USER1 AND
USER3 IN S_USER3 AND
USER6 IN S_USER6 AND
ABKRS IN S_ABKRS AND
USER9 EQ 'X' .
ENDIF.
IF OFFSHORE EQ 'X'.
SELECT
BUKRS
KOKRS
OBJNR
KTEXT
anfaufnr
aufex
USER2
USER0
USER1
USER3
USER6
USER7
USER8
ABKRS
USER9
AUFNR
FROM AUFK INTO TABLE IT_AUFK WHERE BUKRS IN S_BUKRS AND
anfaufnr IN S_anf AND
aufex in s_aufex and
aufnR IN S_OBJNR AND
USER2 IN S_USER2 AND
USER0 IN S_USER0 AND
USER1 IN S_USER1 AND
USER3 IN S_USER3 AND
USER6 IN S_USER6 AND
ABKRS IN S_ABKRS AND
USER9 <> 'X'.
ENDIF.
IF BOTH EQ 'X'.
SELECT
BUKRS
KOKRS
OBJNR
KTEXT
anfaufnr
aufex
USER2
USER0
USER1
USER3
USER6
USER7
USER8
ABKRS
USER9
AUFNR
FROM AUFK INTO TABLE IT_AUFK WHERE BUKRS IN S_BUKRS AND
anfaufnr IN S_anf AND
aufex in s_aufex and
aufNR IN S_OBJNR AND
USER2 IN S_USER2 AND
USER0 IN S_USER0 AND
USER1 IN S_USER1 AND
USER3 IN S_USER3 AND
USER6 IN S_USER6 AND
ABKRS IN S_ABKRS.
ENDIF.
*& Include ZCOEP
" Selection of records from coep to internal table.
SELECT BUKRS KOKRS gjahr kstar OBJNR OBJNR_N1 PERIO BEKNZ WKGBTR WOGBTR FROM
COEP INTO TABLE
IT_COEP FOR ALL ENTRIES IN IT_AUFK WHERE OBJNR = IT_AUFK-OBJNR and
perio in S_PERIO.
*& Include ZPROFIT_CALC
" Calculations for income and Profit of the employee.
if not it_coep[] is initial.
select objnr gjahr wrttp versn kstar from cosp into TABLE It_cosp for
all entries in it_coep where objnr = IT_COEP-objnr .
endif.
LOOP AT IT_coep INTO WA_coep.
read table IT_aufk into WA_aufk with key OBJNR = wa_coep-OBJNR.
case it_cosp-kstar.
when '3000200'.
it_cosp-kstar = cosp-kstar.
when '3100040'.
it_cosp-kstar = cosp-kstar.
when '3100360'.
it_cosp-kstar = cosp-kstar.
when '3100055'.
it_cosp-kstar = cosp-kstar.
when '3100065'.
it_cosp-kstar = cosp-kstar.
when '3100115'.
it_cosp-kstar = cosp-kstar.
when '3100120'.
it_cosp-kstar = cosp-kstar.
when '3100130'.
it_cosp-kstar = cosp-kstar.
when '3100135'.
it_cosp-kstar = cosp-kstar.
when '3100140'.
it_cosp-kstar = cosp-kstar.
when '3100145'.
it_cosp-kstar = cosp-kstar.
when '3100150'.
it_cosp-kstar = cosp-kstar.
when '3100155'.
it_cosp-kstar = cosp-kstar.
when '3100160'.
it_cosp-kstar = cosp-kstar.
when '3100165'.
it_cosp-kstar = cosp-kstar.
when '3100170'.
it_cosp-kstar = cosp-kstar.
endcase.
IT_DISPLAY-BUKRS = WA_AUFK-BUKRS.
IT_DISPLAY-anfaufnr = WA_AUFK-anfaufnr.
it_display-aufex = wa_aufk-aufex.
IT_DISPLAY-OBJNR = WA_AUFK-OBJNR.
IT_DISPLAY-USER2 = WA_AUFK-USER2.
IT_DISPLAY-USER0 = WA_AUFK-USER0.
IT_DISPLAY-USER1 = WA_AUFK-USER1.
IT_DISPLAY-USER3 = WA_AUFK-USER3.
IT_DISPLAY-USER6 = WA_AUFK-USER6.
IT_DISPLAY-USER7 = WA_AUFK-USER7.
IT_DISPLAY-USER8 = WA_AUFK-USER8.
IT_DISPLAY-ABKRS = WA_AUFK-ABKRS.
IT_DISPLAY-USER9 = WA_AUFK-USER9.
IT_DISPLAY-KTEXT1 = WA_AUFK-KTEXT.
if WA_AUFK-abkrs = 01.
IT_DISPLAY-STR = 'TM'.
ENDIF.
IF WA_AUFK-ABKRS = 02.
IT_DISPLAY-STR = 'FP'.
ENDIF.
IF WA_AUFK-USER9 = 'X'.
IT_DISPLAY-WORK = 'ONSITE'.
ENDIF.
IF WA_AUFK-USER9 <> 'X'.
IT_DISPLAY-WORK = 'OFFSHORE'.
ENDIF.
it_display-ABKRS = it_display-user7.
IF wa_coep-BEKNZ = 'S'.
IT_DISPLAY-WKGBTR = WA_COEP-WKGBTR.
IT_DISPLAY-WOGBTR = WA_COEP-WOGBTR.
IT_DISPLAY-ADDK = IT_DISPLAY-ADDK + IT_DISPLAY-WKGBTR.
IT_DISPLAY-ADDO = IT_DISPLAY-ADDO + IT_DISPLAY-WOGBTR.
IT_DISPLAY-ADDK1 = 0.
IT_DISPLAY-ADDO1 = 0.
IT_DISPLAY-PROFIT1 = IT_DISPLAY-ADDK1 + IT_DISPLAY-ADDK.
IT_DISPLAY-PROFIT2 = IT_DISPLAY-ADDO1 + IT_DISPLAY-ADDO.
APPEND IT_DISPLAY.
ENDIF.
IF WA_COEP-BEKNZ = 'H'.
IT_DISPLAY-WKGBTR1 = WA_COEP-WKGBTR.
IT_DISPLAY-WOGBTR1 = WA_COEP-WOGBTR.
IT_DISPLAY-ADDK1 = IT_DISPLAY-ADDK + IT_DISPLAY-WKGBTR1.
IT_DISPLAY-ADDO1 = IT_DISPLAY-ADDO + IT_DISPLAY-WOGBTR1.
IT_DISPLAY-ADDK = 0.
IT_DISPLAY-ADDO = 0.
IT_DISPLAY-PROFIT1 = IT_DISPLAY-ADDK1 + IT_DISPLAY-ADDK.
IT_DISPLAY-PROFIT2 = IT_DISPLAY-ADDO1 + IT_DISPLAY-ADDO.
APPEND IT_DISPLAY.
ENDIF.
collect it_display into it_display1.
clear it_display.
ENDLOOP.
"calc
*& Include ZPROFIT_DISPLAY
LOOP AT IT_DISPLAY1. "it_display.
read table IT_COEP into WA_COEP with key OBJNR =
IT_DISPLAY-OBJNR.
read table IT_AUFK into WA_AUFK with key aufnr = IT_DISPLAY-aufnr.
if WA_AUFK-abkrs = 01.
STR = 'TM'.
ENDIF.
IF WA_AUFK-ABKRS = 02.
STR = 'FP'.
ENDIF.
IF WA_AUFK-USER9 = 'X'.
WORK = 'ONSITE'.
ENDIF.
IF WA_AUFK-USER9 <> 'X'.
WORK = 'OFFSHORE'.
ENDIF.
endloop.
clear it_field.
it_field-col_pos = 1.
it_field-fieldname = 'AUFNR'.
it_field-seltext_l = 'project id.'.
it_field-outputlen = 15.
append it_field to it_field_t.
CLEAR it_field.
clear it_field.
it_field-col_pos = 2.
it_field-fieldname = 'KTEXT1'.
it_field-seltext_l = 'Project Name'.
it_field-outputlen = 20.
append it_field to it_field_t.
CLEAR it_field.
clear it_field.
it_field-col_pos = 3.
it_field-fieldname = 'USER7'.
it_field-seltext_l = 'Start Date'.
it_field-do_sum = 'X'.
it_field-outputlen = 20.
append it_field to it_field_t.
CLEAR it_field.
clear it_field.
it_field-col_pos = 4.
it_field-fieldname = 'USER8'.
it_field-seltext_l = 'End Date'.
it_field-do_sum = 'X'.
it_field-outputlen = 20.
append it_field to it_field_t.
CLEAR it_field.
clear it_field.
it_field-col_pos = 5.
it_field-fieldname = 'USER2'.
it_field-seltext_l = 'Location'.
it_field-do_sum = 'X'.
it_field-outputlen = 20.
append it_field to it_field_t.
CLEAR it_field.
clear it_field.
it_field-col_pos = 6.
it_field-fieldname = 'USER0'.
it_field-seltext_l = 'Vertical'.
it_field-do_sum = 'X'.
it_field-outputlen = 20.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 7.
it_field-fieldname = 'USER1'.
it_field-seltext_l = 'Sub_vertical'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 8.
it_field-fieldname = 'USER3'.
it_field-seltext_l = 'Technology'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 9.
it_field-fieldname = 'USER6'.
it_field-seltext_l = 'Department'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 10.
it_field-fieldname = 'WORK'.
it_field-seltext_l = 'Onsite/Offshore'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 11.
it_field-fieldname = 'STR'.
it_field-seltext_l = 'T&M/FP'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 12.
it_field-fieldname = 'KOSTL'.
it_field-seltext_l = 'EMP COST'.
it_field-outputlen = 10.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 13.
it_field-fieldname = 'KSTAR'.
it_field-seltext_l = 'STAFF WELFARE'.
it_field-outputlen = 10.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 14.
it_field-fieldname = 'KSTAR'.
it_field-seltext_l = 'RECRUITMENT'.
it_field-outputlen = 10.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 15.
it_field-fieldname = 'KSTAR'.
it_field-seltext_l = 'TRAVELS'.
it_field-outputlen = 10.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 16.
it_field-fieldname = 'KSTAR'.
it_field-seltext_l = 'SUBCONTRACT'.
it_field-outputlen = 10.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 17.
it_field-fieldname = 'KSTAR'.
it_field-seltext_l = 'COMMUNICATION'.
it_field-outputlen = 10.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 18.
it_field-fieldname = 'KSTAR'.
it_field-seltext_l = 'RENT'.
it_field-outputlen = 10.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 19.
it_field-fieldname = 'KSTAR'.
it_field-seltext_l = 'BACKEND COST (PROJECT EXP)'.
it_field-outputlen = 10.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 20.
it_field-fieldname = 'ADDO'.
it_field-seltext_l = 'Direct costs'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 21.
it_field-fieldname = 'ADDO1'.
it_field-seltext_l = 'Income'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 22.
it_field-fieldname = 'PROFIT2'.
it_field-seltext_l = 'Profit(income-costs)'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 23.
it_field-fieldname = 'ADDK'.
it_field-seltext_l = 'Direct costs(Grp cur)'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 24.
it_field-fieldname = 'ADDK1'.
it_field-seltext_l = 'Income(Grp Cur)'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 25.
it_field-fieldname = 'PROFIT1'.
it_field-seltext_l = 'Profit(income-costs)'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
xlayout-zebra = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = 'ZPROJECT_PROFIT1'
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE_PROFIT'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = xlayout
IT_FIELDCAT = it_field_t
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_DISPLAY1
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
clear it_field_t.
"it_display.
FORM USER_COMMAND using r_ucomm like sy-ucomm rs type slis_selfield.
include zinteractive_profit."Secondary list for calling KO03.
ENDFORM. "USER_COMMAND.
Thanks & Regards,
Lakshmi..Hi,
i did according to ur suggession.
now it is going dump.
and it is telling like this.
2629 i_event_name = 'SUBTOTAL_TEXT'
2630 is_subtottxt_info = ls_subtot_info
2631 ip_subtot_line = lr_data
2632 changing
2633 c_subtottxt = l_subtottxt.
2634 ls_lvc_data-value = l_subtottxt.
2635
2636 append ls_lvc_data to ct_lvc_data.
2637 endif.
2638
2639 ************************************
2640 * Column per Fieldcat Entry
2641 ************************************
2642 clear ls_lvc_data-style.
2643 loop at it_fcat_local assigning <ls_fcat>
2644 where tech ne 'X' and no_out ne 'X'.
2645 if l_invisible eq 'X'.
2646 clear l_invisible.
2647 if <ls_fcat>-do_sum is initial.
2648 continue.
2649 else.
2650 clear ls_lvc_data-col_pos.
2651 endif.
2652 endif.
2653
2654 add 1 to ls_lvc_data-col_pos.
2655
2656 assign component <ls_fcat>-fieldname
2657 of structure <ls_data> to <l_field_val
2658 if sy-subrc ne 0.
>>>>> message x000(0k).
2660 endif.
2661
2662 *... work on average
2663 if <ls_fcat>-do_sum eq 'C'.
2664 clear l_entries.
2665
2666 assign space to <l_unit>.
2667 if not <ls_fcat>-cfieldname is initial.
2668 assign component <ls_fcat>-cfieldname
2669 of structure <ls_data> to <l_unit>.
2670 endif.
2671 if not <ls_fcat>-qfieldname is initial.
2672 assign component <ls_fcat>-qfieldname
2673 of structure <ls_data> to <l_unit>.
2674 endif.
2675
2676 l_from = ls_grpl-index_from.
2677 l_to = ls_grpl-index_to.
2678 if ls_grpl-index_from is initial and
plz any of u help me to come out with solution.
Thanks & Regards,
Lakshmi.. -
Urgent Help Needed for WVC210 camera setup :)
Please help! I am trying to set up a Cisco WVC210 surveilance camera at one of the stores owned by the company I work for. Its a small business and I am the closest they have to an I.T person !! I have plenty of experience with software but not much on networking so need some idiot proof guidance ! The "administrative guide" is not worth the paper it is printed on!!
The store has a fixed IP address of 212.9.##.### I connected the camera using ethernet cable. Set the camera up using the software for the camera, with static ip address of 192.168.0.23. Set the SSID of the camera to that of the router (a Netgear one). It worked fine. I went to unplug so I could have it wireless and NOTHING !! It did work one time (no idea what i did differently!) but it would not work over the internet which is what we need it to do! I need the whole thing password protected too!
Is there ANYONE who can help me please??? I am at the point of running away from my work and never returning !!!! :s
Thank youHi Jodie,
Thank you for posting. In order to make the camera connect wirelessly, first set up the wireless settings in the camera to match the router. I usually open the router configuration page and copy and paste the SSID and Security Passphrase to the camera to avoid error. The next step is to unplug the ethernet cable and power cord from the camera. Then plug only the power back in and the camera should connect wirelessly.
For remote access to the camera you will need to forward port 80 to the LAN IP address of the camera. (192.168.0.23) This is done in the router. If you need help with port forwarding, you can search the web or call Netgear for assistance.
If you continue to need assistance with the camera, the fastest and easiest way to get assistance is to call Cisco Small Business Support. www.cisco.com/go/sbsc
Please go to www.cisco.com and click on "Register" in the upper right to create a user ID. This will allow our engineers to create a case for you. -
Help needed for -- RSVD_BW_GET_DELTA_DATA
Hi Gurus,
<b>I need some help regarding
Delta Extraction FM : RSVD_BW_GET_DELTA_DATA</b>
The pointer for the date up to which delta was extracted during
the last delta update is held in table ROBWQTSTAT.
When I tried testing this function module,
I found that the table ROBWQTSTAT is always empty;
Should I ideally test this from my BW server?
I would appreciate if one of you can guide me step by step.
(Custom modified code would be Great)
Points assured !
Thanks for your time and help,
Aby Jacob Bangalore... :-D
===============Hi,
this worked for me and ROBWQTSTAT is empty as well.
My parameters executing from R/3:
I_REQUNR REQU
I_ISOURCE D82CLNT100
I_MAXSIZE 000000
I_INITFLAG
I_UPDMODE
I_DATAPAKID 000000
I_RLOGSYS D82CLNT100
I_READ_ONLY X
For which DSource are you running it?
But more important; what do you want to achieve? You should be carefull since I am not sure what this will do in terms of delta handling...
For instance, I ran it once and got 800 records as delta. ran it a second time having exception "NO_MORE_DATA"; the third time I had a dump!!
The fourth time gave me again 800 records...
let us know...
Olivier.
Maybe you are looking for
-
Adobe Creative Cloud Computer Specs
My office is getting ready to move to Adobe Creative Cloud. I'm currently running CS5 Production Premium. I'm not computer tech savvy, so I'm concerned my current set up will run CC. Here are my editing PC's specs. Could someone let me know if it is
-
Time machine's pretty little interface doesn't show backups
I've had time machine turned on since october 28th. I needed to restore a corrupt itunes library yesterday but when I launched time machine it only showed me "today" as a recovery option. I actually found the file I needed by clicking down through fo
-
ON OFFICEJET 6500A PLUS HOW TO GET IN PRINT IN ECONOMY MODE,+WHERE IS THE SHUT OF SWITCH
THOSE ARE MY QUESTIONS ABOVE
-
hi experts, i'm getting small problem in creation of infotype i have created one custom infotype in PA by using table control problem is i have entered 5 rows data for one duration when i'm checking data in overview it showing 5 records for single d
-
Single MVIEW LOG replicating to multiple sites
Hi, We are in the process of moving our reporting database to a new server and we refresh our reporting server hourly using MLOGS/MVIEWS. I was testing something and discovered (for myself) that a SINGLE MLOG can be used to refresh MVIEWS at two diff