Help : need it as fast as possible about marketing calender

so i use to use on my sapcrm 5.0 the monitoring on marketing per marketing calender,
can is use monitoring per marketing plan.
if i can how to do it? if not how?

Hi,
You can define the marketing calender query where in you can explicitly enter your required marketing plan and can monitor the same.
Transaction: CRM_MKTPL_CALENDAR
Best Regards,
Pratik Patel
<b>Reward with Points!</b>

Similar Messages

Hi, I've just started as a fresher in sap fico and I'm upto the LSMW part and I'm wondering why I keep getting an error in Run batch step when I do everything else correct could you help? Please help I'm really trying to learn it as fast as possible

Please help I'm really trying to learn it as fast as possible? I've posted the file with all my screen shots going through the enitre process of me creating the LSMW file.

First, I will try to address the iPod issue: If youve tried EVERYTHING on the website, your only other option is probably to contact Apple, I recommend by phone, and informing them of the problem. You are covered by warranty and therefore they are liable to assist you. Try that and come back with a status update
Now I will address your attitude about it:Its absolutely understandable to be upset over something like this, especially with such an expensive product, but you are generalizing far to much. You may think Apple is being unproffesional by not warning potential buyers of the iPods common faults, but do you really think they would? they are out to sell these things, they arent going to point out the bad in their product. And not all iPods have problems, in fact only a fraction do. That gopes for the rest o Apples products as well. You are too hasty assuming all Apple products are junk, and one of many reasons as to why that is unfair of you is becuase you dont own any other Apple products.

Possible to upgrade Express to Pro? Help Needed!

Hey,
I purchased Logic Express from the Apple Online Store recently, and I've learned after installing it that Pro is significantly better and that I would like that instead.
So, I need to know if its possible to buy an upgrade from Logic Express 8 to Logic Pro 8. If it isn't, I need information on how to return Logic Express 8 (I never received a receipt in my email, and I can't readily find the hard copy that came with the product).
Lastly, a friend told me that I need ProTools to recognize a driver (such as a digidesign). I've bought that software, but I was wondering if I should return that also, if Logic Pro 8 can do that by itself (doesn't it come with ProTools?).
Thank you very much for any help.

Thank you so much for that awesome link, I just couldn't find that myself.
My question which you were wondering about:
I have my Midi Keyboard connection to a DigiDesign 002 Rack, which is then connected via FireWire to my iMac. But on Logic, I just can't get the Digi002 to be recognized (it appears as an option under Preferences->Audio->Devices). On my previous computer which had Logic Pro 7 and an XS Key, I had the same setup and it worked fine. I heard that I need the software Protools to recognize my device (the Digi002) but I don't remember that being important when I had Logic Pro 7.
So, when I upgrade to Logic Pro 8, will I still need ProTools?
Message was edited by: watt webb

I have a iMac 21,5" Intel mid 2011 and I need to know if is possible I change the original 500Gb HD for a 512Gb SSD? If yes, where I find a tutorial about this? Thanks a lot and best regards all.

Hi people,
I'm typing from Brasil, sorry my English.
I have a iMac 21,5" Intel mid 2011 and I need to know if is possible I change the original 500Gb HD for a 512Gb SSD?
I intend to keep the original DVD driver and install the SSD in the same HD place.
If yes, where I find a tutorial about this?
And I will like to know if the 512GB Solid-State Drive Kit for Mac Pro is compatible with iMac.
http://store.apple.com/us/product/MC731ZM/A/512gb-solid-state-drive-kit-for-mac- pro?fnode=5f
What brand and model of SSD do you recommend?
Thanks a lot for now and best regards all.
Carlos Sgrillo
Porto Alegre, RS, Brasil

Tukaine
Sep 23, 2012 10:59 PM
Since the late 2009 iMacs came out, replacing the hard drive has caused the internal Hard Drive Fan to start running at around 6000RPM.
This is due to Apple replacing the external Hard Drive temperature sensor with a proprietary firmware and using the drives internal sensor.
Replacement drives do not contain the firmware to deliver temperature data on the temperature sensor cable.
When the iMac does not receive a good signal from the hard drive it puts the fan at full speed to protect the drive.
If you replace your drive, your iMac will initially seem fine, but soon the fan will begin to speed up to full speed. Resetting the SMC (System Management Controller) will have a temporary effect, but again the fan will speed up.
Fixes people have used in the past included:
Using smcFanControl and the terminal to set a MAX speed for the fan and writing scripts to start this after every sleep/restart.
Shorting the temperature sensor cable (Not a possibility on 2011 iMacs) this tricks the iMac into thinking the drives temperature is very low, hence slow fan speed.
Both these fixes are less then perfect and leave the drive in a dangerous situation with no protection from overheating.
Another option people try is other Fan Control software. These programs will not work for this particular issue as they often only control the base speed, and if they do control the fans actual speed they rely on the temperature reported by the sensor which is now incorrect.
HDD Fan Control
HDD Fan Control works to fix this issue by reading the drives internal temperature using the S.M.A.R.T protocol and set the fans actual speed to a value good to protect the drive.
It runs at startup and continually to always control the fan correctly, prevent the loud fan noise and protect the drive from overheating
Instead of HDDFan Control, get the free SSDFan Control
http://exirion.net/ssdfanctrl/

About Java 2 opaque font color question, help needed!

About Java 2 opaque font color question, help needed!
I was trying to test opaque font (the string has a foreground color and a background color), but i can't find the method for doing that.
i can change foreground by Graphics2D.setPaint(Color.black).
Anybody know how to change the background of the string?
Thanks!

Hi. The way I'd do it would be to use the font metrics to find the length of a string and draw a rectangle and then drawstring over the rectangle. If you want an example, I can post it although I suspect theres a better way.

I have just purchased a new computor. I had Lightroom 5.7 on the old computor and need to know how to go about downloading the program to my new computor. Thanks for any help you can provide.

I have just purchased a new computor. I had Lightroom 5.7 on the old computor and need to know how to go about downloading the program to my new computor. Thanks for any help you can provide.

Lightroom - all versions
Windows
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
Mac
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

HELP NEEDED FAST!

Hey, I hava a rather large problem. just so you know, I am american, and run english language everything. my specs are: [Windows XP PRO] [Athlon 64 FX-55] [ASUS A8N-SLI N-force 4 SLI mobo] [2 gigs ram] [2 6800GT s56 MB]. If anyone remembers, a day or two ago I posted a thread called "Driver uninstall/install help needed", that you can find here, http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=28565
A guy linked me some drivers, and now, when I uninstalled the old ones and was gonna install the new ones, I clinked on the amd64 thing in the suprrt thing, went to ctzapxx, amd it says "C:/Documents and Settings/chief/desktop/drivers/support/amd64/ctzapxx.exe is not a valid win32 application."
I am now stuck with no sound or drivers unless I use the system restore point I made before I did the uninstall/install thing.
I would really like some advice, or better yet, and explanation of why they don't work and where i can get some that do. I will bump this if it falls off the 'st page until i get a answer.
Thanks so much for any help
EDIT: I'm gonna go to sleep, so I'll check on the thread in anbout 8 - 9 hours when I wake up before I go to school.Message Edited by Hillbilly_37 on 09-08-2005 06:04 AM

Hillbilly_37 wrote:
Hey, I hava a rather large problem. just so you know, I am american, and run english language everything. my specs are: [Windows XP PRO] [Athlon 64 FX-55] [ASUS A8N-SLI N-force 4 SLI mobo] [2 gigs ram] [2 6800GT s56 MB]. If anyone remembers, a day or two ago I posted a thread called "Driver uninstall/install help needed", that you can find here, http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=28565
A guy linked me some drivers, and now, when I uninstalled the old ones and was gonna install the new ones, I clinked on the amd64 thing in the suprrt thing, went to ctzapxx, amd it says "C:/Documents and Settings/chief/desktop/drivers/support/amd64/ctzapxx.exe is not a valid win32 application."
I am now stuck with no sound or drivers unless I use the system restore point I made before I did the uninstall/install thing.
I would really like some advice, or better yet, and explanation of why they don't work and where i can get some that do. I will bump this if it falls off the 'st page until i get a answer.
Thanks so much for any help
EDIT: I'm gonna go to sleep, so I'll check on the thread in anbout 8 - 9 hours when I wake up before I go to school.Message Edited by Hillbilly_37 on 09-08-2005 06:04 AM
You're trying to run CTZAPXX.EXE version intented to be executed on 64-bit operating system (eg. Windows x64) while you're using 32-bit XP.
You find the 32-bit version of CTZAPXX lying in another folder (i386).
NOTE: When you install/update drivers using CTZAPXX.EXE you do not need to uninstall your previous drivers, but just 'accept' the 'option' asking your permission to stop all shared components while updating.
Hope this cleared something.
.jtp

Help needed for Notifications

After compaing many prducts in the category I went with Forms Central because overall it looked like it had the potential to be the best, and I still think that, but I am now very dependent on it and need a few answers if possible. First of all FormsCentral doesn't seem to show up on Adobe product lists when phoning in for help or in some on-line places. Is FormsCentral considered an Adobe core product that they are committed to long term? I've tied phone support 3 times now - and left a callback number and each time they call back and I jst get the recording with music on hold and have waited over an hour each time and still have not had anyone pick up the phone.
But specific questions related to the product:
1. Why can I not have notifications go to an e-mail other than the one registered on the account. For confirmations you can specify a co-author's email for the reply to field, but why not the same for notifications back to the form owner. And how can you specify not to use a reply-to addresss at all?
2. What kind of backup does Adobe offer on forms and their data in the event of some disaster on the form owner's part. Is there a way to retrieve the forms and data from a prior date if need be?
3. When publishing a response results table to a web addreee, how can I put a pssword on it to be required to open it? I know it has a very unique address and not likely to be seen accidentally by anyone but I have a client who insists on that befoer he will use it.
4. A unique ID field option would be nice
5. A hidden field on the form results that captures the form filler's IP address would really help too.
Overall though great product and if you can keep the enhancements coming this product will be tops.
Many thanks.

We apologize for the poor experience you had with our call-in support. We are definitely committed to FormsCentral. If you ever have any questions do not hesitate to post them on this forum or send an email to [email protected] Both I and the entire product team monitor the forum and that email alias. We are here to help you... your feedback also helps us to build a better product.
Regarding your questions:
I wrote up a FAQ on how others can receive e-mail notifications. You can read it here: http://forums.adobe.com/docs/DOC-1424I'm not sure what you mean by this "And how can you specify not to use a reply-to addresses at all?" E-mail notifications only have a no-reply address and submission receipts have an option to turn it off.
The form file has a history. Click the clock in the lower right corner to see it. You can roll back to an earlier version. If you are really worried about data loss you should also save the data out as an Excel file on occasion.
There is no way to put a password on a published form file. You should just share the form file with him and make him a Reader. He would need a username and password to access it and he would see the same thing as the published file.
Good feedback. If you haven't already, you should vote on that in the idea section - someone else has already asked for this feature. This helps us to prioritize.
Why do you need to know the IP address?
Thanks for your feedback!
Randy

HELP NEEDED!! (please) CS6

HELP NEEDED! I have been working for 3 days in a "new doc". Of course i have saved several times (control+s)
but i do not remember it asking me about file name or folder. Today my comp crashed and i do not find the file. Just found 2 files (a tmp and one with no extension)
: one with 174 mg and another one with almost 2 gb. Is there any possibility to recover my work? Photoshop did not oppened a thing when i restarted comp
Thanks in advance

The TMP file is your Scratch Disk file, and cannot be "recovered" to an Image file.
Your second file might be almost anything. Though designed more for video files, both G-Spot and MediaInfo (both free file info utilities), CAN read several Still Image file types, and might help point out what that file (the one with no extension) really is. OTOH, as it could be almost anything, it could be that there is no header info in the file, for either to read.
Good luck,
Hunt
PS - Before I did much additional work, I would investigate WHY your computer shut down. If you are on a PC, I would go into Event Viewer, at the time of the shutdown, and see if you can track down any warning, or error messages, in both the System and Applications Tabs. I am pretty sure that a Mac has similar, but have not a clue where, or even what it would be called.

Pre-Project help needed

I have used PE7 successfully with single camera footage from my Canon GL2 (nonHD). Now, I want to add an additional camera to get two simultaneous shots, then edit together in the timeline.
To that end I purchased a Canon VIXIA HFS100. This shoots AVCHD (HD) format. My goal will be to end up with a non HD project in PE7 to then write to standard DVD's.
The new Canon s100 has 5 shooting modes according to file size and quality. Is there a suggestion as to which I should shoot in as I will ultimately not be getting an HD product at the end and the highest quality takes lots of computing power to deal with?
What settings should I be using to import the HD files into PE7?
Any other tips before I get started? This will be a challange for me I'm sure and I appreciate any help I can get ahead of time...and I'm sure I'll be back in the "during"part of the project as well.
Kenny

What do you mean by "matching source footage"? Does that refer to vertically stacking the two video tracks in the timeline so as to be in sync with the audio track?
This refers to getting the source footage from each camera to match in all aspects. DV-AVI Type II is a great format/CODEC to work with, as it is the "native" format of both PrE and PrPro.
As for syncing the footage, the slate/clapper is a good idea. Now, with your case, the live performances, one thing to remember will be that both cameras need to shoot the slate, and then continue to run. Otherwise, one would need to reslate for each "take" for both cameras, and this will not be possible with a live performance. You'll just get more footage, than you will likely use with the second camera, the one used for CU's, etc. Much of it will just "hit the cutting room floor." Were you doing a dramatic, scripted movie, then you would just slate each take, but you will likely not have the leisure to do this.
Not sure what is being suggested by this:
In PrPro, one can turn ON/OFF the visibility of either Video Layer, at will. PrE does not allow for this, so adjusting Opacity is the only way that I can see to "get to" the footage on the lower Video Track. Because PrPro also offers a full multi-cam mode, you get two (or more) monitors to view the individual Tracks.
Now, with regard to your computer. I feel that you will have performance issues trying to use it for the AVCHD footage. Most recommend a minimum of a new Quad-core CPU. Many recommend dual Quads, and some feel that the performance is so greatly compromised by the material, that they adhere to dual 7i's, as their minimum. AVCHD is very highly CPU intensive - more so than other formats.
The 4GB RAM will help you, but I would be curious about your I/O subsystem, i.e. your HDD's, their size, speed, controller type, free space and how each is allocated. Most editing and playback is highly I/O intensive (usually more so than CPU-intensive, but not so with AVCHD), so this is a very important aspect of your computer.
Good luck on your Project,
Hunt

HELP NEEDED IN JAVASCRIPT!

A new American-style bar and restaurant is being set up. They require a system for recording orders and producing customer bills.
Restaurant ordering system
This system is used by the waiter or waitress. Having taken a customer order for food and drinks at the customers� table they return to the computer terminal and enter the following information:
�     Their individual order number
�     The table number for the order
�     Details of the order
The details of the order are entered from an on-screen menu, showing all the items of food and drink the establishment offers.
From time to time customers may add to their order, for instance more drinks, desserts or coffee. These need to be added to the bill for that table. At the end of the meal the system needs to produce an itemised bill for payment.
The system should also produce management reports showing sales by each waiter and total sales per day.
You need not worry about the specialised hardware that would be used, such as touch-screen terminals, bill printers and tills. However you might want to create the user
interface as if touch screens were being used with large buttons for easy entry rather than
requiring a lot of keyboard entry.
i need some help with the Management Report i would really appreciate if you helped thanks! :)

still i can't understand which type of halp you
need.
pl. explain. If possible i try my best to help you.I think you or I completely misunderstood his 'question'. It doesn't appear he wants any help. He just wants us to do the work for him. At least that is how I see it.
To OP: 'Taint gonna happen. Ask a specific question, get an answer. Ask for someone to do your homework, fail, or go to a pay site.
��v�

Help needed placing extra images in my portfolio.

I like to add some more pictures by my portfoliomap.
I have now 6 items each page and i like to know if its possible to add some more pictures and how i can do this?
You can find my site at..
http://www.dorffdesign.nl/affiches.html

As you can see on
http://www.dorffdesign.nl/advertenties.html
it worked out fine..
Only the last set off images contait to much space between the set before? Do you know where i can adjust this?
Regards Brian
Date: Tue, 17 Apr 2012 09:07:38 -0600
From: [email protected]
To: [email protected]
Subject: Help needed placing extra images in my portfolio.
    Re: Help needed placing extra images in my portfolio.
    created by Altruistic Gramps in Dreamweaver - View the full discussion
Upload the images to the images folder and use the markup as you have been using in the following, changing the name of the image to suit.
!images/arcadisch_logo.jpg|alt=|src=images/arcadisch_logo.jpg!
Gramps
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4340979#4340979
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4340979#4340979. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Moving files between different devices, help needed.

Hi people, i need some help working this out. I am about to buy a Tablet, it will be my first tablet.
In a few days the iPad 3 comes out and that would be nice, But...I have 2 old PPC macs, both Running on 10.5.8 and an android Phone. I'm guessing that because the iPad doesn't have a micro SD card slot or a proper usb port, getting files from it to all of my other kit is going to be a big pain. I understand that Apple has finally made iOS5 which i'm told is non computer reliant, so in theory, i can buy an iPad, take it home, turn it on, set it up and use it, without having to connect it to a computer with iTunes on it.
I am aware that iPad will come with iCloud, but i'm guessing Apple won't allow any of my kit listed above, to access that except maybe a windows computer. I could use bluetooth?
Is it possible to access files i would store in iCloud from any device, anywhere in the world just by logging in over the internet browser? Or am i going to have to not use iCloud and instead use Google Docs, Dropbox, or some other combination of online storage to move file around, or get a completely diferent tablet.
I'm also concidering an Asus Transformer Prime Tablet plus docking keyboard as that does have a full sized usb port and a micro SD card slot and a full sized SD card slot as well, plus an extra battery.

Yes sorry, i missed a bit out. I would use iCloud from the iPad itself, to backup the iPad so that when it crashes i can restore it, but would have to keep a copy of any files in Dropbox, that i might need to share inter platform. As i tend to keep multi backups anyway coz over the years i've had 2 Hard disk failures and 1 memory stick failure. That approach is not too much hasel. Not as elegant as just using one on line storage area but Hey, Big companies are never going to make their stuff work properly with everyone elses, that would be way too idealic. It was hard enough to get them to use standard file formats.
Thanks again.

How to calculate the 100.000st prime number as fast as possible

Hello,
We were doing some experiments trying to calculate the 100.000st prime number in labview as fast as possible.
Some of us got to about 7 seconds. Does anyone know a way to calculate it faster using labview?
Kev

Hi Pluv,
the VI is mainly based on those Coding challenge linked by Raven's Fan...
And as this sounds like homework (or similar) I would suggest to read that old thread, read articles on Wikipedia, and then do some own coding instead of adorning with borrowed plumes... To calc primes is described in numerous places in the internet, all you need is reading and coding!
And here's you can look at my VI:
One correction to my first post: you only need to calc upto 1.3e6... The 100.000th prime is 1299709.
Message Edited by GerdW on 05-15-2010 01:36 PM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Why isn't adobe reader opening? Please answer question as fast as possible.

Why isn't adobe reader opening? Please answer question as fast as possible.

Well the app must have worked at one point if you have important data in it. Maybe you should seek help on the Adode Reader for iOS web site.
http://forums.adobe.com/community/adobe_reader_forums/ios
Have you rebooted the iPad and then tried the app again? Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Help : need it as fast as possible about marketing calender

Similar Messages

Maybe you are looking for