Help need reg requested start

Hi all,
i have a scenario like when a event raised then based on date entered by user after that date only i need to start processing that task and it can be 1 month ,so requested start can be set like 1 month etc,.
my doubt is can i go for workflow using requested start or it will be performance issue for time gap in months?
Please suggest,
Regards,
Rajkumar

Yes, you can use the date entered by the user as the requested start date. As far as performance goes, it will not really effect performance since no task or background job is being executed until after the deadline is reached. However, I would suggest having a maximum number of days the user can enter. You don't want a WF sitting in a waiting status for too long. My personal rule of thumb is that a WF should be started and completed within 30 days. Any (single) business process that takes longer than that to complete perhaps need to be redesigned.
Derrick
Banks & Company, LLC

Similar Messages

Help Needed for T42 Start-up Problem

Urgent help need!!!
I have a ThinkPad T42 with Windows XP installed. It works perfectly for a while without ever have any problem or error message. Then suddenly it won’t work anymore. The symptom is following:
After power on the laptop the Microsoft window would show up and it prompt me for window logon password. After I type in the password it then shows “window is loading your personal setting”. After a long while nothing would show up on the screen other than the background of the normal screen. There is no window bar at the bottom or any icon on the screen. If I start in safe mode then everything would show up. I don’t know what is going on.
This happened two months ago and I ended up restoring a backup image to get it work again. It happens again today with the same symptom. I am really tired of having to restore image backup every 2 months.
I would really appreciate it if any of your experts can offer me some insight into this problem. I am desperate in need of help.
Thanks very much!

wangy26, welcome to the forum,
Have a look at this thread to see if my post there helps. The problem seems to mostly occur at the start of a month, why I don't know. Unfortunately the member didin't report back whether or not this was a viable solution for them.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Help Needed to Request a Feature

Hello folks!
There is a feature I have been awaiting paitently for years,
ever since Conditional Build Tags came on the scene in RoboHelp.
Adobe has gotten closer than any of its predecessors at providing
this functionality, but just this week, I finally heard verbal
confirmation from Adobe that it doesn't yet do what I need it to
do.
I am appealing to you for help. It seems that the only thing
that will motivate Adobe to provide this (or any) functionality is
a preponderance of user requests on their Feature Request form. I
have already filled this out more than once over the years, to no
avail.
I have detailed below, in 1989 characters, just what I want
and why I want it. If you are moved to also request this
functionality, please go to
www.adobe.com/go/wish
select Feature Request, and if you want, simply copy and
paste my text below into the form. There is a 2000-character limit,
so I have tweaked the wording to make it all fit.
I have been drooling over this functionality for literally
YEARS, because I must maintain 5 separate projects in order to
provide my programmers with all of the different outputs (in
essence, different languages) that we need.
Thanks a bundle!
Marjorie
*******Enhancement / FMR*********
Brief title for your desired feature:
Apply Conditional Build Tags (CBTs) to Topic Titles Appearing
in Search Results
How would you like the feature to work?
Concise problem statement:
On all outputs, the Search Results list is being populated
without my CBTs being applied.
Steps to reproduce bug:
1. Create English & French CBTs.
2. Apply English & French CBTs to topic content,
including to the Topic Title, when displayed in the Design Editor
pane. (This must be done in the Design Editor pane, because CBTs
are not accepted by RH7 in the Topic Properties in the Topic Title
field.)
3. Create 2 new duplicate layouts, which use the English
& French CBTs.
4. Generate outputs for both English & French (WebHelp,
FlashHelp, HTMLHelp--it does not matter which one).
5. View the French output & go to the Search tab.
Results:
6. Search for a French topic title. The Help file does indeed
find the appropriate topic. However, the Search Results list
displays the ENGLISH topic title. If I display the associated topic
in the right-hand pane, I do see the French topic title there, as
well as the French content.
Desired results:
7. The Search Results list should display the FRENCH topic
title in the left-hand pane.
Why is this feature important to you?
No matter which language, our application is going to call
the same specific URL to fulfill a Help request. I use the Map ID
number in the Topic ID field. When I generate WebHelp output, each
topic will have a "Name.htm" which appears as "MapIDNumber.htm".
For instance, "388.htm" is the filename on WebHelp output for the
topic whose Topic Title is "View" in English & "Afficher" in
French.
This feature is important because RH7 will not allow the same
Map ID number or the same Topic ID to be used on more than one
source topic. I need to be able to apply the same Topic ID to
whatever language condition I want, and therefore, my one source
topic must contain all languages with their CBTs applied.

Hello, and thank you all so much for your interest in my
quest!
Since I have much to address, I will quote each person and
then reply to their comments. (Ooops! I have so much to say, I must
address each of your posts separately.)
quote:
Originally posted by:
Peter Grainge
Marjorie
I can see the problem this gives you but I am not sure it is
a bug.
Peter,
It's a bug in the sense that the output is not fully in
French, in every way possible.
quote:
Originally posted by:
Peter Grainge
There is a difference between the Topic Title, as in the
Topic Properties and the Topic Heading, as at the top of your
topic.
Yes, you are right. In the Design Editor, I am editing the
topic title where the Heading style is applied. I suppose the
correct term for this item is indeed "Topic Heading."
quote:
Originally posted by:
Peter Grainge
It sounds like your layout is to have English content and
French content in the same topic and exclude whatever you need to
for a particular output.
In actuality, I use the Advanced button on the Layout to
Define my CBT Expression. I choose to INCLUDE my desired CBT by
Adding the Tag for a particular output.
For English, I would choose to INCLUDE my English CBT; for
French, I would choose to INCLUDE my French CBT.
In my world, there are multiple English names for the very
same widget. Therefore, I use multiple English conditions to
deterime which name should appear for a particular widget. I mark
the rest of the text with ALL of my English conditions, and mark
the French text with my French conditions. (I MUST mark the English
as English, simply because my source topic also contains French
text. This is the only way to leave the English out of the French
outputs.)
Now, imagine that I want to output just one of my English
conditions. If I were to use Exclude for all of the other English
conditions, then the very text that is marked for all of my English
condtions would never make it into my output.
I have tested this, and found that if I simply include only
the desired CBT, it works beautifully. I don't get the French, and
I do get all of the appropriate text for my indicated English
condition.
quote:
Originally posted by:
Peter Grainge
I don't do any foreign language work but my understanding is
that those who do maintain two topics and use the tags on the whole
topic.
That's what Adobe tried to tell me to do. I explained to them
the issue with the same URL being used in all of my conditional
outputs.
For instance, I want Help to come up and display the exact
topic whose name in English is "View." This topic has been assigned
a Map ID of 388. I have also edited the Topic ID to use the number
388. When I generate WebHelp output, you see this topic generated
as "388.htm."
Now, in my French output, this topic would have a different
title appearing--in French, it would be called "Afficher." My
programmers have our application programmed to call "388.htm,"
regardless of what language is running.
RH source topics cannot use the same topic ID on more than
one topic. Because of this RH limitation, I must put the source
text for both languages inside only one source topic: the topic
whose Topic ID is 388.
quote:
Originally posted by:
Peter Grainge
If a topic is in, then you will get whatever is in the Topic
Title.
I told the Adobe employee who called me that they need to
code RH so it looks for the Topic Heading material for the text
they use to populate their Search Results list. He sounded
intrigued by my idea, and said he would tell their engineers about
it.
The only other alternative I can imagine at this point is to
allow CBTs to be applied to the Topic Title text. I have even
attempted to manually apply this in the HTML Editor pane. The
trouble is, when I switch away to the Design Editor pane and then
back to the HTML Editor pane, all of the CBTs that I manually
applied have been lost--and it doesn't matter if I Saved first!
They are simply discarded by RH.
quote:
Originally posted by:
Peter Grainge
I suspect that would be because of the way the Microsoft
compiler works and Adobe cannot control that, nor do I expect
Microsoft to make any changes to accomodate this need.
This is exactly the sort of programming issue they earn the
big bucks to solve--establishing workarounds for the technologies
at work.
I have to believe it's solvable, because, as I have told the
Adobe folks, their competitor MadCap had the exact same issue with
one of their early versions, and they even told me: "The Search
Results list is being populated before the conditions are being
applied." I called them on it, they worked to solve it, and they
ultimately did solve it in Flare by reworking one of their *.DLL
files.
Maybe I'm comparing apples to oranges, but I still have faith
that this can be solved. My only problem is how long it is taking
to get this issue onto their radar. I have been requesting this
functionality for over 1.5 years!
quote:
Originally posted by:
Peter Grainge
Maybe some folks who work in multiple languages could chip in
and advise how they work.
I am guessing that where Map IDs are used for the call, they
maintain two projects so that the "same" topic can have the same
ID.
I already do this in RH X5. I maintain five separate
projects, which contain about a dozen different conditions.
However, I have never yet used CBT functionality on the text
in my 5 projects, because my source remains in Word to this day,
and only RH HTML even comes close to giving me the conditional
output I require. In today's Help files, our users must read and
find the text that applies to their condition, because they are
often presented with text like so:
Condition A
* If you are Condition A, then the software does this...
Condition B
* If you are Condition B, then the software does this...
Condition C
* If you are Condition C, then the software does this...
Condition D
* If you are Condition D, then the software does this...
Condition E
* If you are Condition E, then the software does this...
I was actually asked to split out our conditions in this
manner by managers at my company.
Now, if I were a user, I would HATE having to read
documentation like this.
We actually split out our conditions in this way in 2002!,
anticipating that eHelp or (later) Macromedia or (now) Adobe would
provide the CBT functionality so I could hide all of the other
conditions, and give my users a Help file customized specifically
for their business line. It's now 6 years and counting...
Since I will have some major prep work to do in order to
import my text with minimum pain into RH 7 HTML, I just won't do it
until or unless I can prove that I will be able to output all of my
conditions flawlessly. It doesn't pay my company to do the import
and cleanup if we can't produce the product we are required to give
our users.
Marjorie (reply 1 of 4)

Urgent Help Needed: Sending email starts to send, then freezes computer.

When I click mail icon in Safari, mail window opens OK.
Shows messages from both Mac Mail and main server webmail accounts.
Sending an email starts the small cogwheel rotating showing it has started to send, but then it freezes mail and whole screen/computer.
Have to shut down and reboot computer.
Anyone have any ideas what's causing this and how to fix it?
Recently downloaded Yahoo Widgets V.4 and problems started after that; including knocking out access to iPhoto library. Luckily the library was backed up. Currently awaiting Yahoo's answer on how to uninstall all elements of YWV4. Last time uninstalled YWV4 the mail problems continued anyway.
Unfortunately I don't have Apple Care and main webmail server thinks it's a Mac issue.
toontooter

Hi and Welcome to the Forums!
From what you've posted, it sounds as if you've skipped one critical step. Before initiating the send on the other device, you must instruct the receiving BB to accept the file send request. See this KB:
KB05409 Transfer a file using Bluetooth technology between two BlackBerry smartphones
While the KB talks about transferring between two BB's, the process is the same if the sending device is something else. You must, on the receiving BB, execute the "Receive Using BT" command before you start the send process on the sending device.
Hope that helps!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Help Needed with getting Started With Office 365 Development C# Rest API

We have a O365 Tenant Setup with a Federated Active Directory Setip we want to be able to right code that will connect to our tenant and perform basic CRUD operations against it (ex. Creating mail boxes)
The problem is we want this to be contained in a CLR trigger In SQL so say if a new user is added to our user table then we would create a new AD account for that user and also create a mailbox.
But I cannot find and example on how to connect to Office 365 using the REST API (Not the SDK because you can not add the connected service to a class library) and before the required actions that we need to do. All the example I have found are with the
SDK API and/or require window 8 and that is also not an option.
Please help I do not know where to start, and I would love to see some examples done in c# and not using the SDK.
Thanks,
Andrew Day

Hi,
>> Instead of SharePoint URLs I would use the O365 API URL?
Yes, in my sample code, I was accessing the File resource by using the O365 File API. In your case, you need to acquire the token to access the Mail resource and use O365 Mail API.
By the way, I think the article
Understand Office 365 app authentication concepts will help you to understand the authentication process in Office 365 Development.
>> Why can I not use the SDK API with a class Library?
Actually, you are able to reference the Office 365 .NET SDK in the class Library. But the class library project type was not supported by Visual Studio Office 365 Development Tool. As a workaround,
you can reference the SDK manually in your project.
Since your original question is about “getting started with Office 365 Development C# Rest API”, if you have more questions about the Office 365 SDK, I will suggest you posting a new thread
to discuss the Office 365 SDK. It will involve more other community members to share their ideas and experience on a specific a question and for others who had a similar question could also find the valuable information quickly.
Regards,
Jeffrey
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Help needed to get started

Hi I am very new to Solaris and had not even seen what a UNIX screen looks before. The sys admin person left so it is all upto me to take care of the systems. That is a good thing, I'll learn, but I need some help. I have a brand new Sun V880 box sitting in the box. I have to install Solaris 10 & then Oracle 10g on it.
As I mentioned, I am very new to the world of Solaris. I don't even know how and where to get Solaris installable CD and whether I need license. Also I know that Solaris installation is not like XP that I just run setup.exe.
Could someone please guide me as where and how do I get started. I don't want anyone to do my work, but I need guidance. I know about Oracle 10g CD's but could someone tell me how do I begin with Solaris 10.
The CD
license
parmaeters
kernal settings
etc.
Any help and guidance is appreciated. Thanks in advance.

hello,
you can download the solaris 10 install iso's directly from sun (look under products). as far as the licensing goes, read the aup. i strongly suggest getting a book on unix basics, unix security, and another on administration. unix can be very complicated to learn how to setup and secure properly. i dont want to discourage you, but you are going to need to spend a fair amount of time on this one (learning what everything is, device names, services, package system, etc).
good luck

Help needed regarding illegal start of expression

Hi all, i'm new to java programming and this forum,
i tried to compile the code but the compiler keeps getting
illegal start of expressionpublic int getX() {
the following is my code:
import java.awt.*;
import javax.swing.*;
class Swatches {
     public static final int width = 200;
     public static final int height = 220;
     private int X, Y;
     JFrame     colorSwatches;
     public Swatches(Color Color1) {
          colorSwatches = new JFrame();
          colorSwatches.setSize(width, height);
          colorSwatches.setTitle("Type of color");
          colorSwatches.setBackground(Color1);
          colorSwatches.setVisible(true);
     public void move(int X, int Y) {
     public int getX() {
          return X;
     public int getY() {
          return Y;
     X = colorSwatches.getX();
     Y = colorSwatches.getY();
     colorSwatches.setLocation(X, Y);
Any help will be appreciated as this assignment is due today! thanks in advance.

import java.awt.*;
import javax.swing.*;
class Swatches {
    public static final int width = 200;
    public static final int height = 220;
    private int X, Y;
    JFrame colorSwatches;
    public Swatches(Color Color1) {
        colorSwatches = new JFrame();
        colorSwatches.setSize(width, height);
        colorSwatches.setTitle("Type of color");
        colorSwatches.setBackground(Color1);
        colorSwatches.setVisible(true);
    public void move(int X, int Y) {
        X = colorSwatches.getX();
        Y = colorSwatches.getY();
        colorSwatches.setLocation(X, Y);
    public int getX() {
        return X;
    public int getY() {
        return Y;
}You can't declare methods directly within other methods.
Also when you post code, please post it between [code] and [/code] tags (you can use the "code" button on the message posting screen). It makes your code much easier to read and prevents accidental markup from the forum software.
Finally, please follow standard Code Conventions for the Java� Programming Language.

Help needed- Reg: Display page number in SQL Reports

Hi,
I need to display page number in " page no: X of Y " format where X is current page & Y is total number of pages. Now I am able to display only the current page using ' sql.pno '. but not able to display in ' X of Y ' format.
Any inputs in this regard will be helpful.
Thanks & Regards,
Anilkumar.

Hello Anil,
If you have the above requirement for Oracle Reports then follow the steps:
1.In the Paper Layout view or Paper Design view, choose InsertPage Number.
2. In the Insert Page Number dialog box, choose from the list the location for the page number.
3.Click the desired page number format: Page Number Only or Page Number and Total Pages.
Cheers,
Suresh

Help needed reg extraction

dear gurus
this is mr d.s.charan , i need some documents<.or step by step analasys of copa ,fisl and lo v3 update >, and in reporting regarding variables
your help is much appreciated
thanks in advance
if anybody wants to forward to mail id :[email protected]
waiting for you guys positive reply
bye now
shiva

Hi Shiva,
An application of Replacement path variable can be found here.
http://www.sd-solutions.com/documents/SDS_BW_Replacement%20Path%20Variables.html
Another application to get the Document Count: For example Number of Sales Orders.
Query formula-Counter???
Example for Replacement Path: Characteristic Variable.
http://help.sap.com/saphelp_nw04/helpdata/en/2c/78a03c1178ad2ce10000000a114084/content.htm
Variable Replacement Example
http://help.sap.com/saphelp_nw04/helpdata/en/af/809528939d5b4fbff7e16a5bdc0d85/content.htm
Example for Replacement Path: Formula Variable.
http://help.sap.com/saphelp_nw04/helpdata/en/ca/5f9ac61a205a459d0e7ef313d10321/content.htm
Hope this helps.
Regards
R.Ravi

Urgent help needed reg. user exists..

HI friends,
I have one issue reg. user exists.
I need to add 3 additional fields are
Project Sponsor, Project Manager, WBS Function
to the transaction cje2 using the
enhancement : KAP10001
Exit : EXIT_SAPLPS01_002
i followed writing the code for kap10001 inserted some code and also updated the fields in the ddic tables RPSCO_X, and RPSCO_y.
the new fields has to populate in the cje1 characteristic view of the form and report name 12KST1G.
could you suggest me, how can i populate the new fields in the cje1.
thanks in advance
raghavendra rao G

Hi,
The code in the attachment is working correctly.
My client wanted to populate the description also.
for example. if astnr(applicant no.), in the report it has to populate as
applicant number and applicant name.
for this i have created entries in TKAF table as follows
APPLC     KP
FIENM     ZZASTNR
USGFL     D
ROLNM     PS_ASTNR
CHTAB     TCJ05
CHFIE     ASTNR
RETAB     TCJ05
REFIE     ASTNA
REFIL     ASTNA
REFLL     25
DIMPR     0
RCSIN         1
RSLIN     1
CHAIN     1
CCNUM        0
if i run the cje2 transaction, the applicant name is not appearing.
can anybody give me ideas for this.
regards
raghavendra rao G

HT3964 Urgent Help needed! iMac starts but will not respond

Last night I was dragging photos onto a disc and accidentally (I have no idea how!) dropped 6500 photos onto the desktop. This would take an agr towait for so I rebooted the Mac. Since then it has not responded at all. I have rebooted several time and left it overnight but I think its Ram is not able to cope with it all. I can get it powered up and all the icons appear but not desktop items appears and I cannot open anything. It is as if the computer is frozen. Please help as I have one day to sort these photo discs out to present to my step daughter for her 21st! It's pandemonium here!
Thanks for any help.

Oh yes, files on the Desktop consume far more resources,as each one is a special Qurtz window... LOL.
Do you have another admin account you can log into?
If so try a Safe Boot from the HD, (holding Shift key down at bootup), if not...
Reset OS X Password Without an OS X CD...
http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/
Admin Hack...
http://www.hackmac.org/?q=node/4
Starts up like the first time you buy a new Mac, but after filling in all that info again, you should have access to the computer and the other Users & files will still be there... give the new User a different name than an existing one.

Help needed in request.getParameter

I have one table with field
EMP_ID varchar(10) latin1_swedish_ci PRI
I am passing the value of emp_id from one page to another.In the second page using request.getParameter i am receiving the value
first page
code:
out.println("<td><a href = viewEmp.jsp?id=" + id + " /a>View</td>");
in second page
code:
String tempQuery ="Select * from GSIS_EMP_MASTER where EMP_ID = "+ request.getParameter("id");
Above are working fine if the EMP_ID is integer.If it is not integer like 3sd or 1a... i am getting error of
Exception : java.sql.SQLException: Error during query: Unexpected Exception: java.sql.SQLException message given: Column not found: Unknown column '1a' in 'where clause'
thanks
Edited by: priyap on May 14, 2008 6:08 AM

String tempQuery ="Select * from GSIS_EMP_MASTER where EMP_ID = "+ request.getParameter("id");if it is string then include double quotes for that getParameter()
"Select * from GSIS_EMP_MASTER where EMP_ID = '"+ request.getParameter("id")+"'";observe it carefully i've enclosed the getParameter() with single quotes. you can use double quotes also but don't forget to use \" to avoid escape sequenses
Edited by: Diablo_Chiru on May 13, 2008 11:47 PM

Hi.. urgent help neede reg the AVL display

Im making use of ALV to dislay my report output.
when my program is run in background , the ALV is getting displayed..but... there is another small table with information about<b> " the number of records passed "[ </b> .. i want to supress it... how to do that??
i want to that supress that !!
kindly help me pls!!

Hi Ramya,
just make use of the print parameter
DATA:
    ls_print                              TYPE slis_print_alv,
PERFORM alv_print                 CHANGING ls_print.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      is_print                            = ls_print
*&      Form alv_print
*       Print options
FORM alv_print CHANGING ps_print          TYPE slis_print_alv.
ps_print-no_print_selinfos              = 'X'.
ps_print-no_print_listinfos             = 'X'.
ENDFORM.                    " alv_print
Regards,
Clemens

Help with Reg Expression Start method

Hi there,
I've been looking through some examples of regular expressions and I've became totally unglued at what the start method of the Matcher class returns.
Here's the example...
Passing in "\d*" ab34ef to the following code
import java.util.regex.*;
public class Class1
public static void main(String []args)
    Pattern p= Pattern.compile(args[0]);
    Matcher m=p.matcher(args[1]);
    boolean b=false;
    while (b=m.find())
      int x=m.start();
      String y=m.group();
      System.out.print(x + y);
}Gives the output
01234456
I understand eveything apart from the 6 character. How can m.start()return 0 (at the start) and 6 at the end when the string being searched is 6 characters long.
My head hurts.

The fact that a string is an array of characters under the hood is just an implementation detail, and it's getting in your way. What start() returns is the beginning position of a substring which may have a length of zero.
The first time through the loop, the regex matches a zero-length substring at the beginning of the target string. That's the position preceding the first character, index 0. Then, because the match didn't consume any characters, the Matcher moves ahead one position before trying again. Another zero-length match, another bump-along, and now it's at index 2. This time, the regex can actually match some characters. It matches the substring "34", and that brings us to the part that's really confusing. Because the previous match consumed some characters, the Matcher doesn't do a bump-along before attempting the next match. It matches a zero-length substring at index 4, right where the previous match ended. Then it bumps along to index five and does another zero-length match.
Now, you and I know that the character at index 5 is the last one in a string whose length is 6, so there's no reason to look for any more matches at this point. And if the regex were required to match at least one character, the Matcher wouldn't bother trying again. But in this case a zero-length match is considered valid, and there's one more position where that's possible. It does one last bump-along and matches nothing once more.

Help needed Reg: 1Z0-042 certification Exam in Chennai

Hi I am in Chennai, want to give certification exam for 10g 1z0-042. I enquired at many training centers like NIIT, SQL Star Plus etc for Study material and sample questions. But there is no such service they are offering. Can anyone please help me regarding this.

Try buying from Oracle Education itself.

Help need reg requested start

Similar Messages

Maybe you are looking for