Help! Need some files.
Need these files ==> 1/ Map called "english male" => Contains the audio files, of the male voice navigation commands.
2/ The XML Document "config"
Anyone who still has the male voice guidance during navigation, could be a donor :-)
These files can be found on your memory card.
To locate these files, please follow these simple steps ==>
1/ Connect your Nokia N95 to your PC using the provided USB cable.
2/ Choose for connection type A/ mass storage or B/ data transfer.
3/ Locate in Windows Explorer your memory card, the memory card should be displayed as a hard drive.
4/ Then to locate the files go to the following maps *Private *20001f63 *English
5/ The map "English" contains the files I need A/ map called "english male" & B/ the XML Document "config"
Can anyone PLEASE post these files, or send them to me by E-mail ?
This way I can restore the previous audio files for English male voice navigation commands.
I want to get rid of the female voice commands witch I have now.
Any help would be highly appreciated.
Best Regards,
Marc.
Will gladly send you the male files if you have the female files
Similar Messages
-
Oracle 9iR2 in RHLE3 AS... I need some files...
Hi!!!
I need a patches to Install Oracle 9i(9.2.0.1) in RHEL3.
I know that they are in metalink, but I don't login to metalink site... *^^*
I need some patche files...
opatch.zip
p1866899_8171_linux.zip
p2974664_11i_GENERIC.zip
p3006854_9204_LINUX.zip
p3095277_9204_LINUX.zip
p3119415_9204_LINUX.zip
p3016968_9204_LINUX.zip
p3078144_9204_GENERIC.zip
p2617419_210_GENERIC.zip
Could somebody send them to email, my email address is [email protected]
Thanks, Have a good day
p3095277_9204_LINUX.zip -> usuable my FTP site
ftp://www.oorizip.orgI'm sorry. My mistake.
Now my ftp site is avaliable.
Thank you joel. -
Need some files to execure RFC to download file on the presentaion server
Hi SAPGURUS,
I need following files to setup my RFC program. Please let me know if you have it in your system.
rfc.car
car.exe
rfcexec.exe
thanks a lot for your help.
Regards,
PritiHi
Go thourgh the link
To download
http://documentation.softwareag.com/crossvision/sap231/pages/install.htm
For Documentation
http://sapabap.iespana.es/sap/info/rfcexec/rfcexec_e.htm
Regards
Pavan -
Whoops!
Didn't download / upload all my files from my idisk account; now i need some for some study work; what can i do to access them?As Apple announced over 14 months ago, iDisk was shut down at the end of June 2012. They gave a one month extension for any laggards to download their data, and finally turned off the servers, deleting all files at the end of July.
Did you not keep offline backups of these important files, as recommended by Apple? You should never only have one copy of any important file, especially if that one copy if stored on someone elses server you don't have control over, and more importantly when they say it is being shut down forever. -
Some help needed regarding Files and URLs on a server
I don't get it - my applet works in a local directory, but not on a server. This has to do with the loading of files (I load an array of images to use, but when I attempt to use that array, it comes up with the error ArrayIndexOutOfBounds), but I can't understand what the problem is...
I have a code that loads files (using File objects) from the current directory (a .jar file) into the program. I do not simply type in the file names - I set it so that the program searches for them based on a prefix in the file name. This works fine on my computer, and I never navigate to files outside of the .jar file. Why might this have a problem on a server? Would URL objects be more appropriate?
Note: I alter the file base String in this way before loading it (this stands for the current directory)
fileBase = applet.codeBase.toString().replace('\\', '/');codeBase is simply the applet's codeBase() method put into a URL variable. The replace statement is there so that there are no backslashes. And this works perfectly on my computer. Any help? Would it work if I used a URL instead? If so, how do I perform a search function with a URL (so that all the filenames within a certain directory are returned as Strings)?Thanks for the info, it helps a lot. You say there is no "practical" way to search for a file under a URL path. What I am trying to do is load a file that begins with a particular prefix. (eg. I wish to load a file called "funnyImage0011204924." However, the numbers after the prefix "funnyImage" are variable, and might require change in the future. Is it possible to load any file with the prefix "funnyImage," using URL methods? Would I need to create a new class? Is this impossible?)
Please remember that I do not plan to go outside the .jar file, so there is no point in trying to get around server permissions and all that if it is unnecessary. -
Some help needed getting file path
I had some help earlier attaching a file to mail via a dialog. That worked great.
Now I am trying to get a particular file to attach.
The following works but if i try to dynamically define the path ie comment out line 1 and bring into the script lines 2 and 3 it only adds the folder (line one). Any ideas?
tell application "Finder" to set the_files to {alias "Alberti work:WSC projects:WSC Blue Haven 440b:Construction:Progress Certificates:440b_progress certificate_8.pdf"} --------------line 1
--set the_path to "Alberti work:WSC projects:WSC Blue Haven 440b:Construction:Progress Certificates:" as alias ---------line 2
--set attach_file to "440b_progress certificate_8.pdf" -------line 3
tell application "Finder" to set the_files to the_path & attach_file
tell application "Mail" to tell (make new outgoing message) to set visible to true
tell application "Mail"
tell front outgoing message
repeat with a_file in the_files
make new attachment with properties {file name:a_file} at after the last paragraph
end repeat
set visible to true
end tell
end tellYour problem is in the line:
<pre class=command>tell application "Finder" to set the_files to the_path & attach_file</pre>
where the_path is an alias and attach_file is a string representing the file name.
When you use the concatenate operator ( & ) with two different object classes (in this case an alias and a string), you get a list as the result, so after this line runs the_files equates to a list containing two items:
<pre class=command>{alias "Alberti work:WSC projects:WSC Blue Haven 440b:Construction:Progress Certificates:", "440b_progress certificate_8.pdf"}</pre>
There's no way that Mail.app can translate that into something that can be attached to an email message.
Instead, what you want to do is NOT define the_path as an alias, leave it as a string. Now the above line would result in one long string of the form:
<pre class=command>"Alberti work:WSC projects:WSC Blue Haven 440b:Construction:Progress Certificates:440b_progress certificate_8.pdf"</pre>
which can easily be coerced to an alias suitable for Mail.app:
<pre class=command>set the_path to "Alberti work:WSC projects:WSC Blue Haven 440b:Construction:Progress Certificates:"
set attach_file to "440b_progress certificate_8.pdf"
tell application "Finder" to set the_files to alias (the_path & attach_file)</pre> -
Help needed with File Formats (Save As...)
Somewhere upgrading versions of Photoshop (Mac), some old File Formats have remained. The result is that I cannot properly select a File Format to Save As... except the native PSD format. Others have to be selected by selecting a format below the one on the list, meaning that I cannot select TIFF because there are no formats below this one. (Accepted formats http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-7758a.h tml#WSfd1234e1c4b69f30ea53e41001031ab64-7754a)
I've looked in the Plugins folder and there are no strange file formats there. I checked Library>Application Support>Adobe>Plug-Ins but nothing there. I've tried searching the entire hard drive for Compuserve GIF (one of the offending file formats) but nothing matches.
I give up trying to figure out where some of the problem plugins are located. As you can see from the image below, selecting Multi-Picture Format actually will save it as a jpg. From reading Adobe's formats, I think CompuServe GIF is causing part of the problem. I don't know what other one.
Or it may be that I just need to reset something so all formats are properly recognized. Can anyone help?Curt,
That is great information. Unfortunately I've already checked the preferences and do not have an additional plugin folder specified.
Suppossedly, according to the information from Adobe, the only place plugins should be loaded is in the Photoshop > Plug-Ins folder, or possibly Library>Application Support>Adobe>Plug-Ins (according to the link you provided). There is nothing there.
When I look at Photoshop > About Plug-ins I see that, for example, there are two (2) versions of CompuServe GIF format. Obviously one is old from a previous install/update, but I cannot find it anywhere. If I could find it, I could remove it. I suspect that is one of the conflicts causing my problem, but I see no way in Preferences to remove a plug-in. The link you gave says to move it outside the folder, but it presupposes you can even find the offending plug-in, which I cannot.
Monty -
Help needed for file processing using FTP
Hi All,
I am new to ODI tool and currently we are implementing one project in ODI. Could you please, any one help me on the following requirement... how to implement it?
Scenario:
i) I need to pick a file from remote host 'outbox' dir using FTP process, and place into local 'temp' dir. (I can do it with odiFTPGet tool)
ii) Change the file as per target business requirement.??? ( this step challenging me)
for ex:
if source file name : <project name>_<source ID>_<transaction name>_<unique id>.txt
target name should be : 1234_<transaction name>_<sysdate in yyyyMMddhhmmss>_<unique id>_2345.txt ( here 1234 and 2345 are hard coded values)
iii) Later move to local 'temp' to local 'outbox' dir. ( I can do it with odiFileMove tool)
iv) After successful process move the file from remote 'outbox' to remote 'archive' dir ??? (again this is challenging me).
For this my questions are:
1) How to get file name into a variable ( In one of the post , it says we need to create data model and data stores, and interface to get the file names into a file. apart from is there any easy way i can implement it in package it self?)
2) How to tokenize a long string ( i.e., need to tokenize the source file to get <unique id> and <transaction name> and map to target file name)
3) How to define implementation for Java in user function?? do we need to use class declarations and import statements?? I need a sample user function in Java.
4) How to move/rename a file in remote server?? ( need to move file from remote 'outbox' server to remote archive' dir)
5) If any step in package fails, How to get the error msg into a variable which i can use for sending mail and raise a ticket in remedy?? ( I will pass that variable to as content to mail and remedy ticket)
6) How to handle list type data (string list) by variables in ODI?? (As we can define single variable not as list.)
I am sorry to ask all my queries I a single post. But I need to solutions for all to implement this in my project.
Thanks in advance. Appreciate early response.
Regards,
Kiran.NCan any one share your thoughts for my request.
Thanks in advance.
Regards,
Kiran -
Help needed for file to file communication
Dear all I am working on file to file adapter in XI 3.0 . I tried to different waysof flat file location C:\ and C:/ I am not soure witch one is currect and any time i am getting NO MESSAGE FOUND ! error in SX_MONI.
and
Any one have step by step clear procedure for File to File Adapter SAP XI 3.0.
Thanking U,
<b>Murali</b>.Hi Murali,
first we need to uderstand how to do content conversion ( to convert flat files to xml format ) for which u can go through the following links :
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
http://help.sap.com/saphelp_nw04/helpdata/en/89/90fd3f0521c842e10000000a1550b0/frameset.htm
then file to file scenarios:
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
http://help.sap.com/saphelp_nw04/helpdata/en/43/25112ab6140b25e10000000a1553f6/frameset.htm
Configuring sender file adapter:
/people/sravya.talanki2/blog/2005/08/16/configuring-generic-sender-file-cc-adapter
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
Configuring receiver file adapter:
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i
going through all the given links you will not have any problems doing a file to file scenario with any constraints.
Regards,
abhy -
Hi All,
I am trying to convert XML to CSV(Content conversion in Receiver File adapter).
1. Here is the XML
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Emp_MT xmlns:ns0="http://sdn.com/XML_TO_CSV_01">
<Record>
<Name>David</Name>
<Sal>100</Sal>
</Record>
<Record>
<Name>Michal</Name>
<Sal>200</Sal>
</Record>
<Trailer>
<Flag>END_END</Flag>
</Trailer>
</ns0:Emp_MT>
2. My output need to be
David|100|
Michal|200|
END_END|
3.Content conversion
Recordset Structure = Record,*,Trailer,1
Record.endSeparator |
Record.fieldSeparator |
Trailer.endSeparator |
Trailer.fieldSeparator |
Record.addHeaderLine 0
I know I am doing wrong with CC. I went through the blog, but could not able to fix it. Can any one help me in fixing it.
Thank you
Ganges LeavesHi Ganges,
you need to pass in content conversion the below parameters
Recordset Structure = Record,*,Trailer,1
Record.fieldNames - Name,Sal
Record.fieldSeparator - |
Trailer.fieldNames - Flag
Trailer.fieldSeparator - |
Record.fromConfiguration - YES
If above solution is not working then your XML Structure need to change as per below
The expected XML structure contains the structure as nodes filled with any number of elements without additional subnodes.
The expected document structure usually looks like this:
<root>...
<nameA>
<value1>value</value1>
<value2>value</value2>
<value3>value</value3>
</nameA>
<nameB>
<value4>value</value4>
</nameB>
</root>...
You can use any element names you like. There can be any number of different substructures under the root element, which can be mapped to different CSV structures. -
Help Needed - Embed File in Projector
Hi All - Hope someone can help.
I have a project where I need to create a catalogue. The end
projector will be downloaded and has to contain a pre formatted
exel spreadsheet which when the user clicks an order now button,
the spreadsheet will be launched externally in exel where he/she
can fill in their orders.
I have this working using Buddy API but this means having two
files to download and they have to be in the same location. To keep
things as simple as possible I have been asked to embed the file in
the projector.
I've been searching the web for a couple of days now but can
find no solution. I found Smart OLE Xtra which sounded like it
might be what I'm looking for, however, it appears to only
available for the PC and I'm using a Mac.
Any help on this would be greatly appreciated.
Many Thanks in advance.I also am using Jeode's VM, and faced with the same challenge of transferring files from a barcode scanner connected to the PC via a USB cradle.
Unfortunately, there's no easy way to transfer the files directly to the PC using Java on the PDA device. The problem is that Java needs a network connection in order to transfer the files, which the USB cradle does not supply (uses a serial USB connection to communicate to the PC). Unless you can physically address the USB cradle from Java you cannot transfer the files. One way to possibly overcome this is to try addressing the USB cradle from the PC (maybe by Windows specific API calls using JNI) and 'pull' the files from the PDA in the cradle. Not a simple proposition.
What I ended up doing was utilizing ActiveSync on the PC and PDA. Part of the setup of the PDA was to specifically name the device with a known name, so that the ActiveSync shared folder could be referenced from both the PDA and PC. Copying files to the shared folder on the PDA automatically synchronized the files to the PC, and vice-versa.
Not very elegant, but the quickest way to move files back and forth... -
Help needed - Missing Files in Aperture
Hi All:
A quick question: I initially imported RAW files in to a new project. During some time I was doing adjustment to these files, a subset of these files disappeared from the browser (I checked under "all image library" and the project). I can't remember if I inadvertantly deleted them from the Library.
However, the strange thing is that I still have these files in the Aperture Library (I have checked and confirmed that they are physically in the Library and they are not referenced files).
How would I bring these files back to be shown in Aperture ?
Thanks,
Ed
mbp 17" 2.16 GHz Mac OS X (10.4.6) 2G 100G@7200I wanted to ask anyone (close to this issue) if they've had the problem I've had after upgrading to ver. 1.5.3. Once this upgrade was done, and I opened Aperture, I noticed that lots of photos seems to be missing. specificly from July of 2006 to current. These photos were stored in several projects that I created simply listed as months (ie. 0701-Photos) meaning Jan of 2007 photos, etc.
These projects and their photos are not to be seen now. I'm hoping there're on my hard drive somewhere. I've tried to rebuild library but no luck.
Help please from anyone?? Thanks!
PowerMac G5, MacBook Pro 15 Mac OS X (10.4.9) 30" Apple Cin. display -
Hello
May some MEGA users, that use other models than 180, send me their MSIDrvIF.dll and ForMpc.dll (comes with Media Center III)
I need it to check something with these files because my grider plugin is behaving strange on some systems.
Please mail at [email protected]
Thanks a lot
NathanNow i've checked it. The files are equal in filesize and so I think they're also in data.
No need to send futher files.
Thanks
Nathan -
Help needed parsing file contents.
I have a program that opens a file reads the contents a line at a time and tries to extract the contents after a tag into some variables.
The format of the file is always:
</Title>
</Version>
</WelcomeText>
</Logo>
</TimeDelaySec>
</Buttons>
</ButtonLabel1>
</ButtonLabel2>
</End>
Title, Version and Welcome must have something after them. Welcome can be multi-line and include Tabs and newlines.
Time Delay and Buttons will always have a couple of characters of text after the tags. End never has anything after it is optional whether anything follows on from the all the other tags.
Now I try and read these into strings for each tag. I don't require the tag only the information that follows it but things get a bit mixed up depending on whether things are included or not and whether the Welcome contains newlines.
Can anyone suggest a good way to extract these details and possibly give an example. Many thanks.
Mark.Here you go, you can adapt this to your needs:
private static void readData()
// Open the file for reading
BufferedReader br = getFileStream();
if (br == null)
return;
String currentLine = null;
// Read line by line
try
while((currentLine = br.readLine()) != null )
// Ignore comments
if (currentLine.startsWith("<--"))
continue;
// username tag found
else if (currentLine.startsWith("<username>"))
sender = br.readLine();
// password tag found
else if (currentLine.startsWith("<password>"))
password = br.readLine();
// smtp host found
else if (currentLine.startsWith("<smtp_host>"))
smtpHost = br.readLine();
// subject tag found (this is multiline)
else if (currentLine.startsWith("<subject>"))
int lineNum = 0;
defaultSubject = "";
while((currentLine = br.readLine()) != null && (!currentLine.startsWith("</subject>")))
if (lineNum > 0)
defaultSubject = defaultSubject + "\n";
defaultSubject = defaultSubject + currentLine;
lineNum++;
br.close();
// Gets the defaults file input stream as a buffered reader
private static BufferedReader getFileStream()
try
FileReader fr = new FileReader(new File("yourfile"));
BufferedReader br = new BufferedReader(fr);
return br;
catch(FileNotFoundException fnfeEx)
System.out.println(fnfeEx.toString());
return null;
} -
PLEASE HELP: Need some help with coding a next page button.
so ok, in details, I'm trying to code a next page button and can't really figure out how and tried to look for them over the net but can't find the kind I am looking for. So ok, the kind of next page button I'm looking for is the kind where you have like << 1 2 3 4 5 ... (Next page button) >> not just a button where I need to hyperlink it to the next page url cuz I have like 35 pages to put... so I'm trying to figure it out yet no cigar so can someone please help me with this? Thanks!
What I've seen done a lot (on forums with upwards of 1000 pages on some threads) is to add a "pagination" block of code that has:
two or three pages before the current page
two or three pages after the current page
a drop down with ALL pages listed
The "next" link or button is then just a copy of the final link in the inline list.
Something like this:
<table>
<tr>
<td align="right" valign="bottom" nowrap="nowrap"><span class="gensmall"><b>Goto page <select name="generate_pagination" onchange="if(this.options[this.selectedIndex].value != -1){ window.location = this.options[this.selectedIndex].value; }"><option value="forum-page-26.html" selected="selected">1</option><option value="forum-page-26-45.html">2</option><option value="forum-page-26-90.html">3</option><option value="forum-page-26-135.html">4</option><option value="forum-page-26-180.html">5</option><option value="forum-page-26-225.html">6</option><option value="forum-page-26-270.html">7</option><option value="forum-page-26-315.html">8</option><option value="forum-page-26-360.html">9</option><option value="forum-page-26-405.html">10</option><option value="forum-page-26-450.html">11</option><option value="forum-page-26-495.html">12</option><option value="forum-page-26-540.html">13</option><option value="forum-page-26-585.html">14</option><option value="forum-page-26-630.html">15</option><option value="forum-page-26-675.html">16</option><option value="forum-page-26-720.html">17</option><option value="forum-page-26-765.html">18</option><option value="forum-page-26-810.html">19</option><option value="forum-page-26-855.html">20</option><option value="forum-page-26-900.html">21</option><option value="forum-page-26-945.html">22</option><option value="forum-page-26-990.html">23</option><option value="forum-page-26-1035.html">24</option><option value="forum-page-26-1080.html">25</option><option value="forum-page-26-1125.html">26</option><option value="forum-page-26-1170.html">27</option><option value="forum-page-26-1215.html">28</option><option value="forum-page-26-1260.html">29</option><option value="forum-page-26-1305.html">30</option><option value="forum-page-26-1350.html">31</option><option value="forum-page-26-1395.html">32</option><option value="forum-page-26-1440.html">33</option><option value="forum-page-26-1485.html">34</option><option value="forum-page-26-1530.html">35</option><option value="forum-page-26-1575.html">36</option><option value="forum-page-26-1620.html">37</option><option value="forum-page-26-1665.html">38</option><option value="forum-page-26-1710.html">39</option><option value="forum-page-26-1755.html">40</option><option value="forum-page-26-1800.html">41</option><option value="forum-page-26-1845.html">42</option><option value="forum-page-26-1890.html">43</option><option value="forum-page-26-1935.html">44</option><option value="forum-page-26-1980.html">45</option><option value="forum-page-26-2025.html">46</option><option value="forum-page-26-2070.html">47</option><option value="forum-page-26-2115.html">48</option><option value="forum-page-26-2160.html">49</option><option value="forum-page-26-2205.html">50</option></select> <b>1</b>, <a href="forum-page-26-45.html">2</a>, <a href="forum-page-26-90.html">3</a> ... <a href="forum-page-26-2250.html">51</a>, <a href="forum-page-26-2295.html">52</a>, <a href="forum-page-26-2340.html">53</a> <a href="forum-page-26-45.html">Next</a></b></span></td>
</tr>
</table>
Maybe you are looking for
-
ITunes won't open and a Windows error message pops up
I downloaded iTunes 10.2.2.12 awhile ago. It worked fine the first time. Ever since then, whenever I plug in my ipod, my laptop recognizes and says it's syncing but iTunes won't open. I double click on iTunes and I get an error message from Window
-
My mac takes a long time to log on, running slow
my imac is running slow & takes a long time logging on, anyone knows why this happens?
-
Using the right apple ID and password I can't sign into iMassage? Why
Using the right apple ID and password with wi-fi I can't sign into iMassage. Why?
-
As far as I can see, there's still no way to solve compatibility problems between iTunes and Windows Vista. I can't even install iTunes 7.1.1. ("no win32 application","no VBScript installed"), and so, my 30GBipod still waits to be fed again. Could it
-
Oracle 8.1.7 on RedHat 6.2 (kernel 2.2.14-6)
I just installed RedHat 6.2 and I now want to install the Oracle 8.1.7. I read in the installation guide that for this installation I need version 2.2.16 of the Linux kernel. The RedHat 6.2 distribution contains version 2.2.14-6 of the kernel. So I h