HELP ! Need to change video size in project sequence...

When creating a project last month I accidently created it as 1280x960 in the sequence settings, but meant to create it as a 1920x1080 which is what all the video clips are in size. Now I have this nicely edited project but need to convert it to a 1920x1080 in the sequence settings so I can export it as that size. When I go into the sequence settings now this option is grayed out and it won't let me. I have read many forums and they say it’s as simple as creating a new sequence with the right settings and importing the old sequence but when I do this it is still as 1280x960. So my question is other than re-editing this entire project, how can I take this current project with sequence settings as 1280x960 and change the video size to 1920x1080 (Which is what the video clips are originally and when I right click on the individual videos it says 1920x1080). PLEASE help, I am using PP CS5 !!! This is so frustrating !

Create a new Sequence with the settings you prefer,
then Copy > Paste the clips into the new Sequence.
Be sure that your Sequence settings match your footage by doing this:
Or, right-click a media file and select 'New Sequence From Clip".
How do I choose the right sequence settings?
http://www.video2brain.com/en/lessons/how-do-i-choose-the-right-sequence-settings
note:
You may need to re-create audio effects that you applied in the Mixer
in the first Sequence, or you can use your first Sequence as a mixed,
nested audio track for the new properly configured Sequence.

Similar Messages

  • Help! Trying to change frame size of project/sequence

    I have tried everything I can to change my project's frame size to 320 x 240 from 720 x 480--modifying sequence settings (nowhere to change size, just "timeline options" and "render control" tabs), clicking on the sequence's frame size in the browser (even with option and command), going into user preferences, system preferences, item properties, project properties without any dialog box that will help me make the change. I checked off "Prompt for seeings on New Project/Sequence" in User Preferences, but it only gives me a pop-up menu with the Easy Setup options. What's happening? This is taking me forever to figure this out. Any help would be greatly appreciated. Thanks.

    Hi Bob,
    Why do you want a project at 640 X 480 ? You will not be able to print it to your camcorder.
    Just put those values in quicktime conversion box, and your exported movie will has this frame size.
    May be the confusion become from the aspect ratio of pixel...
    DV pixel are displayed "as square pixels" in Final Cut Express, if you uncheck this option in viewer, you will get a horizontal squashed image.
    That's because TV set do not handle pixel like computer monitor and your camcorder record it with this aspect.
    So don't be concern with the 720 or 640 question: just export your movie using quicktime conversion set to 640X480 for viewing on computer (like I suggest earlier) or simply "print to tape" from FCE to your camcorder (with stretched pixel for TV monitoring).
    Michel B.

  • How many servers are generally needed to a medium size HFM project

    Hi,
    I am new to HFM.Can any one help me that How many servers are generally needed to a medium size HFM project? And details that servers are for what segments?
    Thanks in advance.

    Hi,
    You can use one serwer only for everything (provided that you use classic application).
    Number of servers depends on the number of planned applications, the number of users, number of entities, number of accounts, the amount of calculation...
    Best,
    Marcin Kuzdra

  • I want to download digital stamps but would need to change the size to fit my project. Does keynote have the ability to change picture size?

    I'm trying to find a app that will allow me to change the size of a digital stamp. I have heard that Adobe Photoshop will allow me to do this but that is outside of my price range right now. Would Keynote allow me to do this?

    sorry the website went down for maintenance during my last reply.
    Yes Keynote will work OK as a print application for standard image formats;  TIFF, JPEG, PNG, PICT
    Drag and drop as many graphics as you want on to a page.
    Disply the ruler;   view menu > ruler
    Go into  Keynote menu > Preferences   and set the Ruler to inches or centimeters
    you can then drag a guide line out from the ruler to help size the graphic to the measurement you want
    ruler set to inches to measure a 5" x 3" box

  • Converting HD footage....need to change pixel size??? I need help!

    I have someone who shot an event for me and has edited it. He edits on a PC using Vegas. He shot the event in HD. (I haven't gone HD yet and really know nothing about it.)
    The problem is getting his HD footage created in Vegas into my FCP. He sent me a test .m2t clip. Neither QT nor FCP would recognize it. I downloaded Streamclip to convert it, but although Streamclip recognized it, it would not open it. It said "Unsupported Format."
    So now he has figured out how to export the footage as QT, but again he sent a test clip and it is letterboxed. He said I need to change the pixel size to 1.2121.
    How in the world do I change the pixel size?????? I'm open to all suggestions here. Thanks....Nancy
    FCP 5.1.4
    QT 7.1.5

    Squished 4:3 = anamorphic. If you set your sequence to anamorphic (checkbox in Sequence Settings), it should display your clips properly and not insist on rendering. As others have noted, the rest of the sequence settings need to match you clip properties to avoid rendering or RT. You can check those properties with a control-click on the clip in the browser. There is an item there for checking the clip's technical properties. Make your sequence settings match those clip properties.

  • Changing video size in TOC

    Is it possible to make the video pane in the TOC larger?  I tried increasing the width of the TOC itself, but that didn't work.

    Hello
    kcabe,
    When you inser the Slide video, you get two options to place that video
    1- You can place it in the middle of the screen/windows by default
    2- You can check TOC and have TOC in your project and let the video play at the top of TOC that is in the left top corner
    Here are the screnshots
    Step1 > How to choose video above TOC
    STEp 2>
    This is how the video gonna look like (NOTE You cannot change the size of this particular video placed above TOC)
    hope it helps!!!
    Thank you

  • DynamicStreamingResource use will keep changing video size

    We are using OSMF videoplayer and DynamicStreamingResource. Each time the videobitrate change will trigger video size change. I need the video to stay fit on the whole screen. I tried adding size change to the stage but I am must be doing something wrong because I can't see the function for the resize event being called at all.
    The video source is RMTP and streaming 5 different videobitrates.
    Is there an example on how to handle the video size properly when the video bitrate changes using DynamicStreamingResource?
    Thanks!
    sey

    Maybe try resetting the media element's layout metadata whenever the dynamic stream changes (event listener)?

  • Help need in buliding my Online Bidding Project

    hello all,
    i am quite new to JSP.
    as part of my MS course work i am building a OnLine Bidding system or an Auction system.
    hope u all might have seen sites like. yahooauctions and ubid.com..
    i want to know wether it is easy to do with JSP or completely use Servlets. if some one has sample code regarding this type of applications. And any sample code for creating SessionObjects thru JSP.
    please send it to [email protected] the subject which i posted regarding jdbc-odbc connection is also for this.
    thanks in advance.
    Rayudu

    I want to develop a Smart Card for student as mention
    in the link
    http://java.sun.com/products/javacard/examples.html
    Well then you have a number of points that can be solved very differently. Does exist any legacy hardware or software that need to be included into your project?
    1. when student insert the card in card accepantance
    device in entrance of the university all
    information(Name, ID,Photo, Department.....) will be
    displayed in the monitor of the entrance. After see
    the pic get keeper have no confusion about the
    student.Where do you want do store the student information? On card or in a centralised database? Who should be able to change information?
    2. Student can also use this card to use the
    facilities of Library and Cafe.Looks like money comes into play. "Stealing money" is always a good impulsion for any attacker. You should consider this in your system design.
    1. What kind of hardware i need to complete the
    project and successfully deploy it to my university.Sorry, but except for the hardware parts "chipcard terminal" (with or without pin-pad) and several smartcards I can give you only the answer: "That depends on what you want to achieve and how you want to do it"
    2. What kind of Smart Card I have to use exactly.If you want to store the student image on the card, on of your main requirements would be a smartcard that has enough EEPROM for storing the image. Common JavaCards have 10 to 30kb for data and the applet code.
    Jan

  • Help needed regarding change of system CLASSPATH

    Hi All,
    I need to change the system CLASSPATH using my java programe. I tried the following code but its not working though it returns the correct CLASSPATH, but unable to do the modification. All I need is to append a new jar file in the existing CLASSPATH..
    code]
    try{
              sysMap = System.getenv();
              }catch(Exception se1){
                        System.out.println("Exception in finding Environment properties");
              Set Keys = sysMap.keySet();
              Iterator It = Keys.iterator();
              while(It.hasNext()){
                   String strNow =(String) It.next();
                   if(strNow.contains("CLASSPATH")){
                        System.setProperty("CLASSPATH", ".;C:\\Calypso\\Software\\\\Release\\jars\\calypso.jar;C:\\Calypso\\Software\\Release\\build;C:\\Calypso\\Software\\Release\\build\\calypsofx;C:\\Calypso\\Software\\Release\\resources;C:\\Calypso\\Software\\Release;C:\\Calypso\\Software\\Release\\jars\\jconn2.jar;C:\\Calypso\\Software\\Release\\jars\\jaxb-1.0.4\\;C:\\Calypso\\Software\\Release\\jars\\javacup.jar;C:\\Calypso\\Software\\Release\\jars\\antlr.jar;C:\\Calypso\\Software\\Release\\jars\\ojdbc14.zip;C:\\Calypso\\Software\\Release\\jars\\web\\servlet.jar;C:\\Calypso\\Software\\Release\\jars\\web\\webserver.jar;C:\\Calypso\\Software\\Release\\jars\\ftp.jar;C:\\Calypso\\Software\\Release\\jars\\itext-1.02b.jar;C:\\Calypso\\Software\\Release\\jars\\Jama-1.0.1.jar;C:\\jdk1.5.0_10\\bin;C:\\Calypso\\Software\\Release\\webfx\\calypsoWebFXServer.jar;C:\\XXX.jar");
                        System.out.println("Classpath changed");
    Any help will be appreciated.

    Hi Kaj ,
    Well I am in a situation where we need to extend a
    existing system and we are providing the client with
    a new jar file for every modification. Now all I need
    is that our programe automatically add (infect
    append) the jar file in the existing system
    CLASSPATH, so that the client need not to add(append)
    the new jar files all the time.
    Can you provide any help??As others have said, use -cp as argument when you start your application. It's quite common that people write a script that adds all jars in a certain directory to the argument to -cp.
    Kaj

  • Help needed for changing MATERIAL SALES TEXT

    We have a requirement where in i need to chang the existing material sales text. GOTO --> ITEM --> TEXT --> Material Sales text. iwould like to know if it would be possible to do it using a CATT program?? If yes any pointers if no what would be the best approach for this.

    You can also use a LSMW.
    You are lucky, this is exactly the eg taken in SAP help :
    http://help.sap.com/saphelp_erp2005/helpdata/en/e1/c6d30210e6cf4eac7b054a73f8fb1d/frameset.htm
    Hope this helps,
    Erwan

  • I need to change the size of the view for easier reading.  Is there a way to make the page view larger without affecting the form?

    Hi Guys, good product beginning however it's not as good as many of the other Adobe product's workspaces.  I cannot change the size of the view during form design work, so it's a visual strain to work in Forms Central.  Is there a way to modify the view (not affecting the width, size or font when presented on website or on paper)?

    In Photoshop CC 2014 (Windows only) it is possible to use a setting of 200% to scale the UI. On some monitors it improves readability and on others it cuts part of the application screen. To give it a try go to:
    Edit >> Preferences >> Experimental Features
    Put a check-mark in the box and click OK
    Then close PS and re-start for the change to take effect.

  • How to fit video size into project (change dimensions)

    Hello,
    I'm trying to make a short film (~5 minutes length), which includes photos and videos. I understand that MPEG-2 is the best format to work with, so I converted my videos (4 of them) into MPEG-2. The project size in PrPro CS4 is 960x720, 25fps, 48000 hertz stereo. The videos were taken from iphone (mp4) and Windows Live Movie Maker (wmv), and converted into MPEG-2 with Xilisoft Video Converter. They are in different dimensions (for example, the wmv is 1080p, so it doesn't fit my project), and the mp4 is rotated 90 degrees, so it needs to be flipped and I guess resize to a height of 720p.
    Unfortunately my computer is 2.2ghz core2duo with 2GB RAM running on Windows 7 32-bit. I must create this video on this computer. If I will use the native files, how can I fit them into my project size (960x720)? how can I set different dimensions to the videos?
    Thank you in advance for your support
    Tom

    Tom,
    What version of PrPro are you working with?
    Actually, MPEG-2 is not a good format/CODEC to use, as it is both heavily compressed, and is in GOP (Group of Pictures) structure. The version of PrPro, that you have, might well define the best format to use, and maybe even not need to convert.
    Unfortunately, the Live version of WMM will only Export to WMV, where the "non-Live," older version, can Export to DV-AVI, though only Type I, and not Type II.
    In general, for an SD Project, DV-AVI Type II is as good, as it gets.
    The Frame Size of your Project is a bit odd. What prompted you to chose that?
    Good luck, and let us know just a bit more.
    Hunt

  • IMovie changes video size when importing its own exported projects

    How can I control aspect ratio on imports - or simply get iMovie to import .mov files at their current and correct aspect ratio and size, as settings indicate? iMovie is messing with them.
    I'm re-importing a lot of finished, exported iMovie files because a hard drive crash resulted in the loss of the original projects. As I'm doing this, I notice that these same Quicktime .mov files created by iMovie get squashed and stretched when imported as new events. Despite the fact that I'm using the setting "Full - Original Size."
    When I import using the setting "Large - 960 x 540" the aspect ratio is correct, but the frames are reduced in size.
    When I import the same videos by first putting them in iPhoto, and then accessing them through "iPhoto Videos" they are perfectly copied, with correct aspect ratio. But I don't want to have to keep taking this extra step.
    Thank you!

    stage6 files use DivX for encoding.. a HighQuality produced iMovie project could look as good as the stuff there.. allthough, many 'videos' I've seen there are NOT done with a 200$-cheapo-consumer cam.. you can teach Quicktime, and therefore iM to export with that codec... install divx-plug-ins..
    to edit natively non-dv-streams, only alternatives are FCpro (=$$$$) or QTpro (=less convenient).. plus a few 'exotic' apps, as the free Mpeg Streamclip, which allows some 'raw' editing of mpegs etc. ...-
    but..
    if your input is from camcorders, the 'raw' footage is interlaced and low-res, compared to what you see normally on a computer's screen..
    if your input is e.g. computer generated (CGI), use for export Apple Intermediate Codec, which is the HiDef codec of iMHD6 .. and probably, use a setting of a higher res, as 1080..
    if your input is screengrabs, they don't match the TV-resolutions, iM offers, nor do they match the framerates...
    so, what source, what delivery...?

  • Help needed for changing Project Facets

    Hi,
    I am facing a problem in publishing a dynamic web project on workshop for weblogic 9.2. i have set the java compiler settings to 1.3. the error displayed is "Java compiler level does not match the version of the installed Java project facet. at ...<web project name goes here>"
    I checked the project facet settings as Java 5.0. this however is not editable. Is building an Ant script the way forward and if it is, what is the tag specific to project facet settings?
    Thanks in advance.

    You can also use a LSMW.
    You are lucky, this is exactly the eg taken in SAP help :
    http://help.sap.com/saphelp_erp2005/helpdata/en/e1/c6d30210e6cf4eac7b054a73f8fb1d/frameset.htm
    Hope this helps,
    Erwan

  • Help, need to change IP address on host database for Portal

    Hi folks,
    Rather urgent assistance (as usual) needed. I have an installation working correctly on a pair of Win2k machines, one as the 9i database, one as the 9iAS/Portal. The app server has 2 NIC cards, one with public IP address (which is ok), one on the LAN. I need to reconfigure the LAN addresses on both the machines. Initial Portal install done without DNS, i.e. actual server/host addresses entered in the configuration.
    I have tried changing all of the TNS/Listner settings and the NIC card IP addresses and restarting the machines. The likes of SQLPlus work ok, with the TNS connect name allowing over the LAN access into the database with the new LAN addresses. I cannot seem to get the 9iAS/Portal to find the repository with the new addresses.
    Can someone help please? I can't find the answer in any documentation or other postings.
    Thanks in advance
    Rob

    There are other modes of operation for the plasst as well. I am listing them below but the formatting will make it difficult to read. If you like I can email it to you.
    Bill G...
    Configuring Portal when the HTTP server host name of the Infrastructure is changed
    Run the following from the $ORACLE_HOME/assistants/opca dir
    ptlasst.bat -mode SSOPARTNERCONFIG -i typical -sdad portal -host myApache.domain.com -port 7777 -silent -verbose
    NOTE:
    (1) This command would create a new Portal partner application in the SSO to reflect the changes of the Infrastructure. Before running this command please ensure to configure the SSO with the correct hostname by running the ssocfg.bat script located in the Infrastructure install (<infra_home>\sso\bin).
    The value for -host parameter will be the IP address of the infrastructure server and -port will be the port where the infrastructure http server is running on.
    Configuring Portal when the HTTP server host name of the Middle tier is changed
    ptlasst.bat -mode MIDTIER -i typical -host myApache.domain.com -port 7777 -ldap_h myOID.domain.com -ldap_p 389 -ldap_w welcome -pwd secret123 -portal_only -oh /home/oracle -chost myHostname.domain.com -cport_i 8001 -cport_a 8000 -wc_i_pwd invalidator -mc false -mi true -silent -verbose
    NOTE :
    (1) The -host value should match the serverName value of the httpd.conf
    (2) The -chost should be updated with the correct webcache hostname. In a default iAS midtier install the -host is same as the -chost.
    The value for -host parameter will be the IP address of the midtier(portal) server and -port will be the port where the portal is running on.
    Parameter Description Default Value Mandatory
    -i install_type Installation Type
    In the typical mode, the OPCA would get the Infrastructure information like the Portal schema name, Portal schema password, connect string to the Portal repository, SSO Partner application schema and password, SSO Password store schema and password and connect string to the SSO repository from the Repository Access API's.
    In the custom mode, the OPCA would take whatever is passed as the command line arguments.
    CUSTOM
    -mode mode The different install modes are : PORTAL, SSO, SSOPARTNERCONFIG, LANGUAGE, MIDTIER, ALL, SYSOBJECTS , DEINSTALL
    -s portal_schema Oracle Database schema for Portal database objects. In an iAS 9.0.2 install
    the default Portal schema name is portal portal
    -sp portal_password Password for Portal schema. In an iAS 9.0.2 install the portal schema password is randomized by default. Refer to the note "How to get the Portal schema password of the Infrastructure database ?" for details. <portal_schema>
    -c portal_connect Connect string to connect to the Portal repository <hostname>:<port>:<sid>
    -p sys_password The Oracle Database password for the Oracle SYS user MANDATORY
    -sdad portal_dad DAD for the Portal schema. Create the DAD to the Portal repository through the OEM. Refer to the note "How to create and manage the Portal and SSO DAD ?" for details. <portal_schema>
    -host portal_host Hostname of the HTTP server for Portal. This should match byte to byte with whatever is present in the ServerName attribute in the $OH/Apache/Apache/conf/httpd.conf file of the midtier. MANDATORY
    -port portal_port Port of the HTTP server for Portal. The Port attribute in the $OH/Apache/Apache/conf/httpd.conf file of the midtier would provide the value. 7777
    -ldap_h oid_host_name Host name of the OID server MANDATORY
    -ldap_p oid_port_number Port number of the OID server 389
    -ldap_d oid_admin_DN Admininstration DN cn=orcladmin
    -ldap_w oid_admin_pw Password for DN welcome
    -pwd initial_password Initial Password for seeded OID users. In iAS 9.0.2 install this is defaulted to the iAS instance password of the midtier installation. MANDATORY (for ALL or MIDTIER)
    -das_public Add Portal Groups to DAS Public Groups. The values could be Y or N. The default is Y. The setting publishes the Portal groups that the user can add to when creating the new user in OID. Y
    -u default_tablespace Install Portal objects in this tablespace. The default tablespace selected should have atleast 75 MB of free available space and should have autoextend on. Refer to the note "What are the recommended tablespace size required for Portal installation ?" for details. The default tablespace selected by default is users tablespace. users
    -t temporary_tablespace Use this tablespace for temporary objects. The temporary tablespace selected should have atleast 20 MB of free available space and should have autoextend on. Refer to the note "What are the recommended tablespace size required for Portal installation ?" for details. The temporary tablespace selected by default is temp tablespace. temp
    -d document_tablespace Install Portal document table in this tablespace. The document tablespace selected should have atleast 4 MB of free available space and should have autoextend on. Refer to the note
    "What are the recommended tablespace size required for Portal installation ?" for details. The documented tablespace selected by default is users tablespace. <default_tablespace>
    -l logging_tablespace Install Portal logging tables in this tablespace. The Logging tablespace selected should have atleast 4 MB of free available space and should have autoextend on. Refer to the note "What are the recommended tablespace size required for Portal installation ?" for details. The Logging tablespace selected by default is users tablespace. <default_tablespace>
    -in index_tablespace Install Portal index in this tablespace. The Index tablespace selected should have atleast 20 MB of free available space and should have autoextend on. Refer to the note "What are the recommended tablespace size required for Portal installation ?" for details. The Index tablespace selected by default is users tablespace. <default_tablespace>
    -lang language Abbreviation for the language to install us
    -m language_mode Specifies the mode for language installation
    if sso, translations only for Login server.
    if portal, translations only for Portal.
    if -m not specified, translations are installed for Both
    -demo Install Portal webview demos
    -silent Run mode for Portal Configuration Assistant. There is no UI provided by OPCA in the iAS 9.0.2 install. Use -silent option always
    -verbose Log mode for Portal Configuration Assistant. If this parameter is not set, logging information would be in brief and the OPCA would abort the install if it encounters any errors of kind
    ORA-, PLS- or SP2 errors.
    -report Install reports integration with Portal
    -owa Install OWA packages along with Portal This option behaves the same as the SYSOBJECTS mode.
    -sso_only Configure only SSO in mid-tier mode
    -portal_only Configure only Portal in mid-tier mode
    -available Language will be available for user translation
    -chost cache_host Cache host for Web Cache <hostname>
    -cport_i cache_inv_port Cahe port for Web Cache Invalidation 1100
    -cport_a cache_adm_port Cahe port for Web Cache Administration 1000
    -wc_i_pwd wc_inv_passwd Web Cache invalidator password invalidator
    -wc wc_on_off_flag Web Cache ON/OFF flag to enable or disable WC. The default is ON. If set to OFF Portal would not use Webcache though Web Cache may be up and running. on
    -o sso_schema Oracle Database schema for Login Server objects. In an iAS 9.0.2 install the default SSO schema name is orasso orasso
    -op sso_password Password for Login Server Schema. In an iAS 9.0.2 install the SSO schema password is randomized by default. Refer to the note "How to get the Portal schema password of the Infrastructure database ?" for more details. Use similar steps to get the password of the orasso. MANDATORY for the following modes:
    -MIDTIER: except when '-portal_only' is specified
    -LANGUAGE: except when '-m portal' is specified
    -DEINSTALL: except when '-drop PORTAL' is specified
    -odad sso_dad DAD for Login Server objects. Create the DAD to the SSO repository through the OEM. Refer to the note "How to create and manage the Portal and SSO DAD ?" for details. <sso_schema>
    -sso_c sso_connect Connect string to connect to the SSO repository If the Portal and SSO use the same database this option need not be passed and would default to the -c argument. <hostname>:<port>:<sid>
    -sso_h sso_host Hostname of the HTTP server for the SSO. If Portal and SSO use the same HTTP server this option need not be passed. It would default the HTTP server used for the Portal.
    -sso_p sso_port Port of the HTTP server for the SSO. If Portal and SSO use the same HTTP server this option need not be passed. It would default the HTTP port used for the Portal.
    -pa papp_schema SSO Partner Application Registration Schema. In an iAS 9.0.2 install the default Password store schema name is orasso_pa <sso_schema>_PA  
    -pap papp_password SSO PA Schema Password. In an iAS 9.0.2 install the SSO schema password is randomized by default. Refer to the note "How to get the Portal schema password of the Infrastructure database ?" for more details. Use similar steps to get the password of the orasso_pa <papp_schema>
    -ps pstore_schema Password Store Schema. In an iAS 9.0.2 install the default Password store schema name is orasso_ps <sso_schema>_PS  
    -pp pstore_password Password Store Password. In an iAS 9.0.2 install the SSO schema password is randomized by default. Refer to the note "How to get the Portal schema password of the Infrastructure database ?" for more details. Use similar steps to get the password of the orasso_ps. <ptore_schema>
    -pd pstore_dblink Database link from Portal schema to Password store. If the Portal and SSO use the same database this option need not be passed. <portal_schema>_DBLINK  
    -p_tns pstore_tns TNS connect string to Password Store. If the Portal and SSO use the same database this option need not be passed. The tnsalias should be created in the iAS 9.0.2 Portal middle tier.
    -s_tns portal_tns TNS connect string to Portal
    -ssotype ssotype SSO install type. Valid values are repository, midtier, all Repository
    -ultrasearch Ultrasearch configuration
    -drop drop_obj Drops either PORTAL or SSO or ALL (Both)
    if PORTAL, drops Portal schema and OID entries.
    if SSO,drops Portal schema and OID entries.
    if ALL, drops Portal and SSO schema and OID entries
    -oh oracle_home Oracle Home
    -mi midtier_install Midtier Installation
    -mc midtier_config Midtier Configuration
    -ssl Use SSL protocol for configuration. Pass this parameter only if SSL configuration is required. If this parameter is passed the -port passed should also be the SSL port of the HTTP server. Bt default this is not passed.
    -emhost em_host Enterprise Manager host for monitoring <hostname>
    -emport em_port Enterprise Manager port for monitoring 1810
    -iasname ias_name Name of the iAS instance that the install is installing on

Maybe you are looking for