Help!! Need to create Left Master Page in FM 8

Howdy--
I'm using Frame 8 after a bit of a break from FM. The last version I used was 7.2 and I don't seem to remember it being so hard to create a left master page. When I go to do it in FM8, it tells me that Left is reserved. OK, but where does it live--can't find that neither.
Would appreciate some help and many thanks,
Marie

Hi Marie
I'm not Van, but can answer those questions. :-)
To change the size of the text flow box (text frame, by the way), Ctrl-click on the frame border in the master page, then select Format > Customise Layout > Customise Text Frame. Or you can Ctrl-click and drag the borders, if you don't care about precise measurements. I'm using FM7, so FM8 may be different - but I hope not.
Cross-references aren't the friendliest. See the online help topic "Creating cross-reference formats". You need a definition that's something like:
See Figure <$paranumonly> for more info.
If you get stuck on cross-refs, it's prob a good idea to start a new forum topic about that.
Cheers, Rebecca

Similar Messages

  • Help needed to create a master-detail JSP page using OAF.

    I like to create a master-detail JSP page using OAF. If any help or guide will be appreciate.
    - Kausik

    A Master Detail Page is a basically a game between two VOs(Master and Detail mostly connected through a View Link). You can also have a look at the View Link section in the Dev guide. Page Layouts is one thing which you can take a call yourself.
    Regards
    Sumit

  • Help needed to create a password page

    Hi,
    Is there a way to have the user click on an image in a flash
    presentation and be asked for a password to enter the site?
    Thanks!

    yes. have a on release method on the image. then display a
    text box to input the password and have a function check against
    the text field input. If password is correct go to page, if not
    highlight password field. of course there are a ton of ways to do
    it so find out what will work best for your project.

  • How do I create a Master Page?

    I'm creating a page layout document with each page containing one or two photos on the left side and a bulleted list for each photo on the right. The doc is 150 pages and I'd like to create two different master pages - a one-photo layout and a two-photo layout. I can't find how to create a master page.
    I have added guide lines and then duplicate the page and change the photo and text, but I'd love to create a set of master pages. Seems like a good skill to have. Thanks for any help.

    The Pages09_UserGuide.pdf does a poor job of explaining how to create a working template with master layouts.
    For a start *Chapter 13 Designing Your Own Document Templates* doesn't acknowledge the difference between *Word Processing mode* and *Layout mode* with all instructions being only for Word Processing mode and even those are incomplete.
    Pages in *Layout mode* does not have master pages it has what you might call an internal template, with the page layout being inserted from the Pages button on the toolbar or:
    +Menu > Insert > Pages > select from thumbnail+
    This is like a page duplicator, with none of it being retrospective as far as I can see. Once you insert a page, changing the original Pages layout does not actually change any page based on it. To change an existing Page design you have to remember its name perfectly down to case sensitive and save a new version over the existing version or go to a completely separate menu item to delete and add designs.
    You create the Page designs, I hesitate to call them masters, by laying out a sample page and with an object selected on that page:
    +Menu > Format > Advanced > Capture Pages… > Name the Page+
    Despite the confusing plural in +Capture Pages…+ it only captures the one page with all other options greyed out.
    Worse still it does not seem to retain any of the facing page information except for the header and footer, plunking down the page irregardless of whether it is left or right or part of a pair even though it lets you click +Facing Pages+ in the Inspector.
    It is hard for me to imagine how they could have created a more muddled, confusing and incomplete arrangement for tasks that were well established on the Mac back in the early 80's when Apple started the DTP revolution 25 years ago.
    I am repeating myself but it seems like a product designed by a committee that never uses it.
    Peter

  • Need to create a login page to my Adobe Muse site - how do I do that?

    Hi all,
    I need to create a login page on my Adobe Muse site, as I need to post information that only authorized personnel have acces to. Is that possible. I use Business Catalyst to host my site.
    Thanks,

    Hi Michael,
    The Business Catalyst site should be on web Marketing plan.
    You can create the secure zone in Business Catalyst and then place the secure zone login form code from Business Catalyst to the page in Muse.
    Business Catalyst Help | Add a secure area to your site
    Regards,
    Gaurav Aggarwal

  • Create horizontal master page?

    How do I create a horizontal master page?
    According to the Adobe documentation that I've found, the way to do this is in Document Setup. But I don't want the entire document to be horizontally aligned. I just want one page to be horizontally aligned. I thought the way to accomplish this would be to create a master page with a horizontal alignment. What is the easiest and best way to do that?

    Are you preparing a file for print or presentation?
    If it is print, I would keep the orientation of all pages the same, and rotate content for the horizontal page. Rotate the Spread View as necessary to edit content.
    If it is for presentation, it depends what version of Indesign you are using.
    -If it is CS5 or higher, then you can define multiple page sizes in one document
    -If it is CS4 or lower and final product is a PDF, then I would keep the orientation of all pages the same, and rotate the horizonal page in Acrobat

  • How to create a master page in Dreamweaver?

    Hi
    Does anyone know how to create a master page in Dreamweaver ??

    Dreamweaver Templates ~
    http://www.smartwebby.com/web_site_design/dreamweaver_template.asp#1
    Server-Side Includes ~
    http://www.smartwebby.com/web_site_design/server_side_includes.asp
    Spry Tabbed Panels ~
    http://labs.adobe.com/technologies/spry/samples/tabbedpanels/tabbed_panel_sample.htm
    Spry Accordion Panels ~
    http://labs.adobe.com/technologies/spry/samples/accordion/AccordionSample.html
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/
    http://twitter.com/altweb

  • Help needed to create Quik Time VR movies, step by step

    Hello,
    thank you for your attenction.
    I need to create Quick time vr movies, and I need to know the exact sequance of steeps to do it, and if the starting point I use is correct.
    1) I shooted a sequence of photos with my digital camera (for example: www.stebianchi.com/quicktimevrhelp/still-photo.jpg).
    2) Then, with photoshop (CS4) I choose: Automate/photomerge and I select all them to joint them in a bigger 360° panoramic one (www.stebianchi.com/quicktimevrhelp/pan.jpg). If, untill here, all is correct, the first question: in photoshop Photomerge layout option, do I have to choose one voice "auto, perspective, cylindrical, spherical, etc..." rather than anoter one of these?
    3) from here, I really need your help.
    First of all: the great doubt:
    My photos can not cover a spherical panorama, they're only a "ring" around a center (and not a spherical texture). To cover all the surface (or almost all, ok...) of my ambient, do I have to use a wider lens on my camera or there is a different solution (for ex a vertical photomerge?).
    4) Done this, I think I shuold buy a software like Cubic converter, to set and export the QTVR movie. Right?
    Thanks a lot guys,
    all the best!
    Stefano

    You can call your local apple store(find one on the home page of apple.com) and they will give you instructions how to convert DVD to iPod. That is what they told me, but from what I heard, you may need more than Quicktime Pro. Just call and ask them, because if you make a manual of how to do it, it could help me a lot.
    (I'm looking for a good DVD converter, already know some, beside the internet download ones)

  • Urgent help needed -in customizing an OAF page --adding new button?

    Hi,
    We are currently implementing an OAF based oracle application.One of the requirements that the customer has is to display an additional button on the page button bar available out of box in an OAF page. This button needs to be enabled/disabled based on certain conditions. Also when the button is pressed a pl/sql api needs to be invoked. I know through personalization a new button can be created in the page button bar. But how do we handle the logic behind the button? Can we extend the page level controller?Will this survive future upgrades? If not then what is the alternative?
    Please help!
    Thanks!

    You can follow the thread Calling PL/SQL Procedure for pl/sql call from controller example.
    --Shiv                                                                                                                                                                                                                                                                                   

  • Help needed to create a CSS 'style-switcher' button.

    Hi,
    I need some help please in creating alternate style sheets for each page on a site I'm creating to enable users to change text size (i.e. small, normal and large options - sometimes, symbolized as a letter 'A' in varying sizes). The site has been built in basic format so far but I would like to add these features for the sake of usability. There are no actual problems with the site as it currently works fine, it's just this one thing I need help with.
    Is this possible using post-processing methods, (which I have no problem doing) and if so could someone kindly point me in the right direction? I've searched the iWeb forum using keywords most relevant to this question and have found nothing.
    Any help greatly appreciated,
    Matt
    MacMini G4 1.42GHZ   Mac OS X (10.4.8)  

    Thanks varkgirl,
    This works (partially): this is the page:
    http://www.charitydesigns.com/odyssey/index.html
    The first paragraph is not responding and at larger sizes line spacing is not in proportion to the size of the text (and is squashed), what am I doing wrong?
    Hope you can assist.

  • Right master page oversets to the left master page

    Hi all,
    I am currently working on a book. But I ran into an problem that I am not able to fix. So I was hoping you guys could  help me out with this.
    So this is the situation:
    I have an "A-Master" page. On this master page I gave the right page a design element. (the blue bar)
    In the Indesign preview nothing seems wrong. The left and right page looks exactly like the "A-Master" page.
    Then, when I export the .pdf for testing. I see that the right page oversets to the left page. (see image below)
    Does anyone know what the problem is here?
    Many thanks,
    Marco

    It doesn't look like a problem. Your document is bleeding on the inside and outside. That bleed is stopping short of the crop line. You could go into your document bleed settings and set the inside bleed to none, but I don't think it's a problem...

  • Powershell, design manager, uploading html file not creating associated master page file

    I am uploading a xyz.html file through powershell for 2 site collections, when .html file is uploaded and published it automatically creates xyz.master file. It is working fine for not publishing sites collection only, for publishing site collection .html file
    is uploaded successfully but it is not creating associated .master file. If I close powershell console and run again it works successfully.
    another interesting thing I noticed that if I specify "spadmin" account which I used to install sharepoint as  site collection primary administrator, all works well, currently I am using "spsiteCollection" account for primary site collection
    administrator and I am having above mentioned issue.
    powershell script is also running with spadmin account.
    I have ensured .html is checked in and publish properly, If I manually unpublish and publish .html file it creates .mater file. What could be the issue?

    Hi,
    According to your post, my understanding is that you have an issue about upload html file to master page gallery.
    I have used the PowerShell contains in the codeplex to upload the files to master page gallery, it works without any issue.
    https://uploadmasterpages.codeplex.com/
    You can check your PowerShell with this article, or use this bat file to upload directly to check whether it works.
    Thanks,
    Jason
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Jason Guo
    TechNet Community Support

  • Need to create a TASKS page with a filter default in PWA Project Server 2013 (Online)

    Never done this so, I am wondering How to go about or what I would need to create a simple PWA page like "Tasks" in Project Server 2013 online where it default to a filter that is set to not equal to the user that is logged on?
    \Spiro Theopoulos PMP, MCITP. Montreal, QC (Canada)

    Hi Spiro,
    The "my tasks" page or "my timesheet" are automatically filtered on the user currently connected. Unless you are using workarounds such as status manager or delegation, I see no way to bypass this.
    Hope this helps,
    Guillaume Rouyre, MBA, MVP, P-Seller |

  • InDesign CS5 shuts down when inserting left master page.

    InDesign CS5 is shutting down whenever I attempt to insert a page from a master. I am attempting to insert a verso page before a spread. Normally it would bump the current verso to recto and the recto down to the next spread. (I need to add many blank versos in a document that has facing pages.) I have the latest update (7.0.3), and have read all previous posts on similar issues. Have tried several fixes (including deleting columns on the master pages which I have done, to no avail.) and am about ready to save all of my files back down to CS4 just so I can get the work done. Is there a remedy to this bug yet? I was hoping that 7.0.3 fixed it, (and the random elements that appear from master pages on documents that have been converted from CS4), but that doesn't seem to be the case.
    Is anyone else having this trouble? Adobe? are you working on this problem? Thanks for any help.

    We're seeing more reports of trouble with leagcy files in CS5 than any previous version. I'm now advocating that files you intend to convert should be exported to .inx or .idml from the original version, then open that instead of the .indd in CS5.
    And if this pops up again with a file that you can't get to work with a simple export to .idml for CS5, try opening that in CS4 and re-export to .inx, then move that back to CS5. you never know.

  • Workflow help need urgently in Material Master creation

    hi All
    I am trying to create a Workflow for creating Material Master views in ECC6 system . Initially Basic data 1 and basic data 2 is created by user and then my workflow is trigerred for subseuqent views .For e.g i need to route the workitem to a user to fiill in Purchasing data and then to another user to fill in accounting data after basic data 1 and basic data 2 is created by so called super user. I was trying to use business object BUS1001006 for this using method CREATEVIEWS but i am getting stuck here with using this method . I dont know how to use this method so that once the user clicks the workitem it should directly go to Puchasing tab view or Accounting tab view (depending on the kind of user currently accessing the workitem).
    Any idea how to solve this problem ? It would really be helpful for me
    Thanks for your help in advance

    1. I have entered transaction OMS9
    2. Entered the Field selection group as 2
    3. Below the fields option 3 RM03M-WERK280  (Plant)  i double clicked and checked there is hide option.
    4. I came back selected the T001W - Name1 (Name)     I double clicked that in 34 , 35 , 54 was enabled with hide i changed to opt entry but still it seems to be the same.
    5. I came back again and below in the field selection tab checked for the MM01 and MM02 transaction as well as fert,halb,roh as opt entry
    It did not work.Kindly guide me if there is some other option available for this to revoke the plant option.
    Any help would be really appreciatable.
    Regards,
    Deepak GS

Maybe you are looking for