Help: Need to exclude sales for customers in a act group from Consumption.

Hi Gurus,
We have a requirement where sale to customers in a certain account group needs to be excluded from being considered as consumption and in turn from MRP.
Also can specific movement types be excluded form consumption.
Thanks in advance for your answers.
Deep

Hi Padraig Manson
Would like to ask you whether you have:
1. Setup a campaign element to collect the respondents?
2. Setup a campaign element to collect non respondents?
If yes, then the target group that is collected in the point number 2 above will serve the purpose.
Rgds
Hari

Similar Messages

Help need my mac pro for school..it has Grey screen..spinning wheel...repaid disk ok...repair disk permission all repaired but one warning...

Help need my mac pro for school..it has Grey screen..spinning wheel...
I think I have mountain lion OS X....I have done I think almost every suggestion I've seen in discussion boards.
Boot in recovery repaired disk...ok...repair disk permission...all repaired but one warning...I've tried to reinstall lion (without losing data) and it Got all the way to one minute to be done and then the time change back two hours and kept doing this all night long. I haven't done a back up due to no external for time machine.
I hope someone can please help me I've been going crazy for a week now trying to figure this out. I use my computer for school and I'm currently very behind from in my school work thank you
Also I've checked my available space 424.91 free of 750 gigs....disk is verified

Welcome to the Apple Support Communities
Try holding the Shift key while your Mac is starting to start into safe mode. Then, after starting in safe mode, open Finder, select Go menu (on the menu bar) > Go to Folder, and type /Library/StartupItems. Then, empty this folder and restart the Mac.
If your Mac starts after doing this, it was a problem with a third-party app that starts automatically when you turn on the computer. It won't start automatically anymore after doing that

Desperate help needed to configure WVC210 for remote access?

Hi, I'm new and desperately need some help on setting up my WVC210 for remote access.
I manage to setup and see images from my WVC210 using my home LAN via both wired and also wireless.
I have 2 questions:
(a) for wireless connection, i only manage to get connection to my WVC210 if i disable the wireless security from my router. But that means i'm opening my wireless LAN to everyone. How can i still get connection to the camera if i enable the wireless security from my router. (FYI: my router is 2Wire ADSL from Singnet Mio)
(b) how can i get connection to my WVC210 from outside or in my office? I type in the camera Fixed IP address (displayed on the front screen) on the web browser, by it shows a error page. Is there some setting that i might need to adjust ?
Pls kindly help me
Thank you.

Bernard,
For Item (2) is there any difference between the camera built-in dyndns updater versus the software updater? I am under the impression that the software updater is easier to manage.
The biggest difference for you is that the camera always stays at the same location, and the laptop goes with you. Every time you access the internet from a different location with the laptop the software updater is sending the new IP address to dyndns.com. This causes you to lose access to your camera because the FQDN doesn't point to your home IP address anymore. Once the dyndns credentials are in the camera (or router) there is no management needed. The device will automatically update dyndns.com with your new IP address as it changes, and you do not need to do anything.
For Item (3), are you saying port forward 1025 is it for the 2nd camera only or for both? Or is it 2nd camera use 1025 and first camera use 8080?
Here's an example of what I mean:
Camera 1: 192.168.1.210 port 1024. In router, forward port 1024 to 192.168.1.210
Local Access: http://192.168.1.210:1024
Remote Access: http://bernards210.dyndns.org:1024 (Example)
Camera 2: 192.168.1.211 port 1025. In router, forward port 1025 to 192.168.1.211
Local Access: http://192.168.1.211:1025
Remote Access: http://bernards210.dyndns.org:1025 (Example)
Camera 3: 192.168.1.212 port 1026. In router, forward port 1026 to 192.168.1.212
Local Access: http://192.168.1.212:1026
Remote Access: http://bernards210.dyndns.org:1026 (Example)
to access the 2 camera outside, do i have to have another dyndns host name or can i use the current one for both camera?
As you can see in the above example, the dyndns name remains the same for remote access to all three cameras. The only change is the port number at the end. Your router will translate the port number to the IP address that the port is forwarded to, allowing you to select the camera that you wish to view by changing the port number in the address.
I was actually thinking that the camera web browser can show 2 camera at the same time. Is it possible?
No. Each browser window will display a single camera. You can however opens multiple instances of your browser to allow viewing of more than one camera simultaneously. A better solution is to install the Video Monitoring Software that is included with the camera which allows you to view multiple cameras in the same window.

Help Needed: Enable local currency for Customer Invoicing

We are needing to enable local currency for customer invoicing on a project coming very soon. Does anyone have any information on the best way to get this done and/or documentation to look over? Any help would be greatly appreciated!!
Thank You in Advance!
Jay Esparza
SAP Functional Consultant

Hi
Local currency automatically gets activated as you set your company code currency.
No need to enable separately for customer invoicing
Plz assign points if it is helpful.
Regards
Tapan

Help Needed-Connection Url String for Oracle8i

DriverManager.getConnection(Url , username ,password);
In the above , I need the connection url for Oracle8i Database.
Thanks..

This works for me:
jdbc:oracle:thin:@HOST:1521:INSTANCE
Where HOST and INSTANCE represent the machine running oracle and DB instance. 1521 is the default port but may be changed.
Mike

Help needed please.. how do I remove my credit card from itunes? just discovered over $450 of charges when I looked at my email... Kids had no clue they were using our money and not their gift cards

Help needed please.... I just discovered over $450 charges to my credit card from Itunes. The kids had no idea they were using our credit card and not their itunes gift cards and 4 year old just clicks on anything! I didnt save my credit card details so am a bit miffed at this... I cant find anywhere in itunes to remove it. Edit.. but not remove. Editing does not remove it.. HELP

To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Accepted forms of payment > http://support.apple.com/kb/HT5552
Changing Account Information > http://support.apple.com/kb/HT1918

Need general hardware guidelines for customers to hear permission-based audio stream

We're running a permission-based audio stream to be amplified through in-store sound systems, but are unsure about basic hardware requirements. What basic features must all hardware have to log into our server via username/password and receive audio signal?

Some of our customers will want to install a simpler box that is dedicated solely to receiving audio data from an outside source and amplifying it through speakers. A laptop or desktop might be overkill. I'm wondering more what is needed at the root networking level. For example, a competitor of ours deploys a proprietary box that "uses TCP/IP networking, which can be either static or assigned with DHCP". That makes sense to me, but what other specs are we missing? We'd rather just tell the customer what to go buy rather than deploy our own proprietary hardware.
(BTW, thanks for helping us with this).

Help needed in blocked sales order list vkm1

Scenerio is that currently the sales coordination department views all blocked sales orders thru t-code VKM1
The company said they want sales coordination department to view ONLY the sales orders under the value of 300,000rs. (That value being flexible can be changed to 200,000 in the near future.)
They also want the finance department to also view credit (this being a filter search criteria) sales orders BUT ABOVE the value of 300,000rs (That value being flexible can be changed to 200,000 in the near future.) And have the right to release the orders. So in other words 2 different views for the two different departments.
What comes to my mind of a way to do this is by creating 2 query reports with a variant of a < less then, >greater then, or = equal too. And thru this query report I can assign the users to only be able to use that report hence, fi report, sd report view. But I am confused in how to begin and setting this up. Please help with any ideas and configuration tips. Which table or field to use in the query report for this?

Hi,
For this requirement, i would suggest 1.you design two separate layouts and
2.ask your basis consultant to assign this two layouts to the two set of departments so that one is authorised to use the first layout and the other department is authorised to use the second layout, please try this out and let me know.
I have checked the layout, there you cannot restrict a particular document value, instead design a user exit and use it for the two departments.
regards,
US
Edited by: usasapsd usasapsd on Mar 2, 2009 7:33 AM

Help needed in PL/SQL for updating the column for multiple records

Hi,
I am new to PL/SQL and need some help. What is the most effiecient way to update some field in a table as I may need to update thousands of records. I have a coulmn groupid can have multiple records tied to it. All the records attached to some groupid have a priority field also.
How can I update the prorityfield value for all the groupids in a profiecient way. Here is a sample data
GroupId     Priority
1            1
1            2
1            3
1            4
1            5
2            1
2            2
2            3
3            1Here I have three groups 1, 2, 3. Now if any group contains only one record the priority remains same e.g. groupid=3 on top. If any group contains more than one record e.g. groupid=1 & 2 I want to re-arrange the priority fields e.g. If I want to update groupid=1 now if I change the priority of 2 to 5 (make it the last) I want to rearrange the remaing records priority i.e. if 2 becomes 5 as I have 5 rows for groupid=1 then 5 becomes 4, 4 becomes 3, 3 becomes 2 and 1 remains the same.
Same wya if I want to make the priority 1 to 3 for groupid=2 then need 2 to become 1 and 3 to become 2 etc....
Any help is appreciated.
Thanks

Hi,
You don't need PL/SQL to do this (though you can put the following in PL/SQL if you want to):
UPDATE     table_x
SET     priority = CASE
               WHEN groupid     = 1
               AND   priority = 2
                    THEN 5
               WHEN groupod     = 1
               AND   priority     BETWEEN 3 AND 5
                    THEN priority - 1
               WHEN groupid = 2
               THEN
                    CASE
                         WHEN prioity = 1
                         THEN 3
                         ELSE priority - 1
                    END
             END
WHERE     groupId          IN (1, 2)
AND     (     priority     BETWEEN 2 AND 5
     OR     groupid          = 2
     );There are lots of different techniques that can reduce your coidng: for example, the nested CASE statement used for groupid=2 above.
You could do several smaller UPDATEs (for example, one just for groupid=1). Execution will be slower, but coding and testing will be faster.
You could make the "magic numbers" 2 (for groupid=1) and 1 (for groupid=2) variables, even outside of PL/SQL.
If you need more help, post the information that Satyaki requested.

Help needed in UserExit QEVA0010 for UD Check

Hello All,
I need you help in UserExit QEVA0010 for UD Check. Actually i want to restrict user to enter stock posting when particular UD Code is Enter. For Exmple, If user set UD Code as 'A' (Accept) then in another tab for stock posting user can only enter stock quantity in "unrestricted" and in "Sample Qty". Is it posssible to disable all other fields except Unrestricted & Sample qty.?
With Thanks & Regards,
Mudassar Praniya.

Hi,
Please use the following:
when 'SICH'.          " On Save action
if vbak-vtweg eq 'HA'. " Check Distribution channel
flg_dh = 'X'.         " Sets if DC is 'HA'.
endif.
if flg_dh eq 'X'.
if vbap-pstyv eq 'TANN'.    " Check item category
    flg_itmc = 'X'.            " Set if item cat is 'TANN'.
else.
message 'SO could not be created Please enter brokerage material' type 'E' display like 'E'.
endif.
endif.

Help Needed Created Standalone Network for iTunes DJ

I use my MBP to manage backing tracks for a band. I would like to use iTunes DJ for requests from the audience via wireless connection via *iPhone/iPod Touch Remote app*. I would use this option in conjunction with a printed song list and small request cards (for those who don't have iPhones).
I can't connect to an existing network as most venues do not have wireless. I would like to set up my MBP as a wireless base station that can be accessed via an iPhone/iPod Remote app. Besides, I would prefer to have a network that echo's the band's name.
I know I have to use the "*Create computer-to-computer Networks*", but I am unsure of what settings I need to get the network working.
I will use Locations to quickly activate the MBP as the base station.
Any help or suggestion setting up my MBP as a wireless base station would be greatly appreciated.
TIA

TSG wrote:
yep, tried changing cables....even upto cat6!!! no joy.
starting to do my head in now.....might call in a network person/tech but i hate the idea of being charged to see him repeat all i have already done!
Agreed. I'd keep at it yourself. I guarantee it will be something simple.
what are the benefits of a switcher? (never used one before) any recomends?
A switch is just like a hub, except that instead of always sending packets to your entire network, it only sends them where they need to go. The benefits grow with the size and speed of your network. Switches used to be much more expensive than hubs but not any more. Normally I'd recommend almost any Linksys device, but in this case dlink seems to have a better one:
http://www.amazon.com/D-Link-DGS-2205-5-port-Desktop-Switch/dp/B000FIVDIA
Again, I don't think your dlink hub is responsible for this dramatic bottleneck though.

Help needed with printer settings for wired ethernet connection

I'm hoping someone can help me with a network printing issue. I have a large format color laser printer (Tektronix Phaser) and since moving to OS 10.6 I can't figure out how to configure the printer so that the system sees it. I have a simple wired ethernet network with a couple of Macs and a couple of printers. All devices are connected via a switch. When using earlier OSs I was able to connect to the Phaser using Ethertalk. Obviously this is no longer supported and I can't figure out how to set the printer so the OS can see it. I have lots of options which can be turned on or off and in some cases set up in other ways: Ethertalk, IPX, Netware, TCP/IP, DNS, LPR, HTTP and remote internet printing, I've tried messing with these but the result is always the same--system doesn't see the printer. Currently Ethertalk is on, IPX and Netware are off, TCP/IP is on, DNS and LPR are on, as are AppSocket, HTTP, FTP and remote internet printing. I can change the IP address but no matter what address I've tried I cannot ping the printer. (I'm using a Gutenprint driver for this printer.)
I don't really know enough about all this to get anywhere and I haven't been able to find help anywhere even from tech friends. Xerox won't help me and neither will Apple. Any help would be appreciated. I can supply more detail on specifics where necessary. Thanks, Bob

Old Phaser models may becoming more and more difficult to use, but you can give this a try.
1. Configure the printer via front panel to use TCP/IP and enable DHCP if it's supported. If not then you will need to configure an IP address for the printer together with your local network's mask, and gateway IP address. Except for the first the others will be provided by opening Network preferences to see what those settings are. The printer's IP address needs to be set somewhere within the range of IP addresses your router provides locally.
2. You need the PPD file required for your printer. If you have the Phaser driver installer you can use it to install the PPD or you can extract the specific PPD from the installer package. This part is tricky because I don't know where you may find the driver now if you don't have the installer. The older installers can be accessed through the Finder by selecting the package then CTRL- or RIGHT-click and select Show Package Contents from the contextual menu. You can then rummage through the package to search for the PPD for your printer. Then navigate to the /Library/Printers/PPD/Contents/Resources/ folder and drop the PPD file inside.
3. Open Print & Fax preferences and click on Add [+] to add a new printer. Click on the IP icon in the toolbar. Select Line Printer Daemon - LPD from the Protocol drop down menu. Input the IP address you assigned the printer in the Address field. You can file in the optional fields that follow. Then from the Print Using drop down menu locate the listing for your printer and select it.

Help needed on mapping information for AT701 element in EDI X12 214 Transportation type (X12_00401_214 schema)

Hi all,
As per the EDI defined standard schema, AT701 element takes the following Enumeration values.
<xs:element minOccurs="0" name="AT701" type="X12_ID_1650">
<xs:annotation>
<xs:appinfo>
<b:fieldInfo notes="Shipment Status Code_1650" />
</xs:appinfo>
</xs:annotation>
</xs:element>
<xs:simpleType name="X12_ID_1650">
<xs:restriction base="xs:string">
<xs:enumeration value="A3" />
<xs:enumeration value="A7" />
<xs:enumeration value="A9" />
<xs:enumeration value="AF" />
<xs:enumeration value="AG" />
<xs:enumeration value="AH" />
<xs:enumeration value="AI" />
<xs:enumeration value="AJ" />
<xs:enumeration value="AM" />
<xs:enumeration value="AN" />
<xs:enumeration value="AP" />
<xs:enumeration value="AR" />
<xs:enumeration value="AV" />
<xs:enumeration value="B6" />
<xs:enumeration value="BA" />
<xs:enumeration value="BC" />
<xs:enumeration value="C1" />
<xs:enumeration value="CA" />
<xs:enumeration value="CD" />
<xs:enumeration value="CL" />
<xs:enumeration value="CP" />
<xs:enumeration value="D1" />
<xs:enumeration value="I1" />
<xs:enumeration value="J1" />
<xs:enumeration value="K1" />
<xs:enumeration value="L1" />
<xs:enumeration value="OA" />
<xs:enumeration value="OO" />
<xs:enumeration value="P1" />
<xs:enumeration value="PR" />
<xs:enumeration value="R1" />
<xs:enumeration value="RL" />
<xs:enumeration value="S1" />
<xs:enumeration value="SD" />
<xs:enumeration value="X1" />
<xs:enumeration value="X2" />
<xs:enumeration value="X3" />
<xs:enumeration value="X4" />
<xs:enumeration value="X5" />
<xs:enumeration value="X6" />
<xs:enumeration value="X8" />
<xs:enumeration value="XB" />
</xs:restriction>
</xs:simpleType>
Now, in my sample input file I am having a column "MileStone", and for example: If I have
"Picked Up Date" in that column, I need to pass "A3" as the value for
AT701 element as per the above code snippets.
Please let me know how to map the "Milestone to "AT701" element.
If I straight away map those two fields, I am getting the below error :
error btm1046: Output validation error: The 'AT701' element is invalid - The value 'MileStone_0' is invalid according to its datatype 'http://schemas.microsoft.com/BizTalk/EDI/X12/2006:X12_ID_1650' - The Enumeration constraint failed.
So, please guide me on how to map the above fields using the functoids.
Thanks in Advance..

Hi Anand,
You can try
Value Mapping functiod along with Logical Equal functiod for this requirement.
Connect the element “MileStone”
to the Logical Equal functiod as the it’s first parameter. And add “Picked Up Date”
as the second parameter.
Connect output of the Logical Equal functiod as the first parameter to the Value Mapping functiod and “A3"
as the second parameter.
Connect the output of
Value Mapping functiod “AT701”
element.
This maps the value “A3”
to the element “AT701”, if the value of “MileStone” element is
“Picked Up Date”
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Help needed in inbound IDoc for ORDERS....

Hello all,
I need help in IDoc for ORDERS.. Here is the situation. I have an ORDERS IDoc coming to my SAP system from my customer. When I see the SO it creates.. it says that it has incomplete data.. Information like pricing, inco terms, payment terms. load data, load date etc. is not filled in. How do get those filled automatically.. my customer can not, obviously, give me all the information needed for the SO.. Where do I configure and how?
Thanks,
Charles

Hi,
You can use user exits available in FM IDOC_INPUT_ORDERS to populate additional information.
Also you can use form CUSTOMER_FUNCTION_DYNPRO to populate additional information for BDC screens of VA01. This form is available in FM IDOC_INPUT_ORDERS as well.
Regards,
Ferry Lianto
Please reward points if helpful.

Please help, need to use stems for final audio output

Hi, hoping somebody can help. Finished a editing a feature due tomorrow and the sound designer gave me a final stereo mix that's a half hour too short. But he also gave me the "stems" and said I could adjust them as if I knew anything about audio.
Here's the question, I have DX, FX, MX, ME and VO files. Don't know which are redundant. Can output myself if I know which ones to use. Please, if you know, share?
Thanks!

Wow, if he knew anything about audio he would have given you the proper mix.
Try just putting each of those in separate tracks.
Make sure the line up by playing the master and listening for an echo. Then just start turning off the tracks until you get what you need. It certainly looks like some will have some internal redundancy. I don't understand all his terminology, but it's apparent that he has mixes that split out the voice tracks so you can drop in foreign language voices later. So the ME and VO sets will duplicate what's found in some of the others.

Help: Need to exclude sales for customers in a act group from Consumption.

Similar Messages

Maybe you are looking for