HELP! need to get DV into imovie using Quicktime 7 pro

Hi there, I need help! I have a movie that is in dv format. I downloaded Streamclip and converted it. Now imovie tells me that I have to have Quicktime 7 pro to change the movie into smaller clips so imovie can import the clips.
Is there any other way? If I buy Quicktime 7 pro, is it actually going to be possible to edit my movie in imovie? I don't have a dvd burner for my mac to save it when I am done. Any suggestions on what I should get? I really know nothing about movies...yet!

Yes. Use the in and out points to create a selection. Set the in at the beginning and the out about halfway.
I think iMovie 4 has a 2GB limit. Let's assume your file is 4GB in size. Make your selection to create a 2GB selection and then use the "Trim" or "Cut" to remove it from the source. Don't worry. We'll fix this later.
Choose "Save As" and pick the MOV extension. This will place your DV file into a .mov container. No changes are made to the true .dv format.
Now you have one 2GB "chunk" of your file.
Back to Streamclip. Note the "time" of your cut so you can find your place for the second chunk. From the Edit menu choose "Undo". This should restore your original file.
Trim or cut the other half of your file. Use Save As to create a .mov file of the second half.
Import these smaller pieces into iMovie 4. When your Project is completed you can delete your original DV file and the smaller .mov files to free up valuable hard drive space.

Similar Messages

I need to capture directly into Imovie using EyeTV.

I can capture directly into EyeTV software no problem. I have an EyeTV 200 with a firewire connection. I can export from Eye TV into Imovie. I would like to remove a step and capture from my EyeTV directly into Imovie. Currently I get a message that says "No Camera Attached". Does anyone know a work around?

The EyeTV hardware/software mpg-2 compresses the content on capture. If you have the latest EyeTV software, the software will let you export the content in DV format for use in iMovie and iDVD which it appears you have been doing.
As for >>I would like to remove a step and capture from my EyeTV directly into Imovie.<< That can't be done.
F Shippey

Help needed with getting Audio signal through to Mac Book Pro (using Logic 9 & Behringer Xenyx 1204USB mixer)

Ok so I am sure I have everything set up correctly,
Logic has recognised and is using the mixer, I have sound coming through the headphones when I put in a drum sample onto audio track, no signal going in from audio using the first channel. Audio channel is set up with correct inputs & outputs. USB setting used on mixer......phantom tried on and off with the condenser mic I am using.....still no luck not even changing from mi to guitar. No signal when recording audio...... AAAHHH HELP! Racking my brains!
Thank you in advance

Kudos to figuring it out yourself.
Yes, Logic is geared to the professional user, you will need to set up the program to your particular way of working, Logic was well developed for professional use long before Apple purchased it, it's not an Apple program per se. It's complex and offers a myriad number of choices so that it can be configured to many styles of working, there's often 3 or 4 ways to perform the same function.
Logic insists the user educate themselves... which is a good thing.
Here ya go!
http://documentation.apple.com/en/logicpro/
"Exploring Logic Pro" is a good one to start with.
Also in the main manual... "Setting Up Your System"

TS3720 I have updated to Mac OS X v10.6.7 and STILL cannot get video into iMovie from Sony HDR SR11 :-( PLEASE HELP ME ...

I have updated to Mac OS X v10.6.7 and STILL cannot get video into iMovie from Sony HDR SR11 :-( PLEASE HELP ME ...

* Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install.
* Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

I have home movies burned onto a DVD. How do I get them into imovie?

I have home movies burned onto a DVD. How do I get them into imove?

i assume you mean for editing. in that case, you're going to need either some software or hardware to convert the signal from DVD to something that iMovie can handle.
there are a couple of devices out there that can convert sources like DVD, like a Canopus ADVC ($170), or the cheaper Elgato VCD ($85) that converts to mp4. the main advantage of the Canopus is that i can convert from analog sources like VHS.
if you're just working from DVD sources, then DVDxDV software ($29) will probably do the trick and be the most reasonably priced option.
of course, these all are meant to be used for non-copyrighted DVDs -- they will not work on DVD's that have have copy protection, and no one here will discuss any illegal copying.

Help needed Displaying ALV Secondary list without using oops concept

Hi Experts
Help needed Displaying ALV Secondary list without using oops concept.
its urgent
regds
rajasekhar

hi chk this code
******************TABLES DECLARATION*****************
TABLES : VBAP,MARA.
*****************TYPE POOLS**************************
TYPE-POOLS : SLIS.
****************INTERNAL TABLES**********************
DATA : BEGIN OF IT_VBAP OCCURS 0,
VBELN LIKE VBAP-VBELN, "SALES DOCUMENT
POSNR LIKE VBAP-POSNR, "SALES DOCUMENT ITEM
MATNR LIKE VBAP-MATNR, "MATERIAL NUMBER
END OF IT_VBAP.
****************TEMPORARY VARIABLES******************
DATA : V_VBELN LIKE VBAP-VBELN."SALES DOCUMENT
DATA : V_MTART LIKE MARA-MTART. "MATERIAL TYPE
*****************FIELD CATALOG***********************
DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
       WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
****************LAYOUT*******************************
DATA : WA_LAYOUT TYPE SLIS_LAYOUT_ALV.
***************VARIANT*******************************
DATA : G_VARIANT LIKE DISVARIANT.
****************SAVE*********************************
DATA : G_SAVE(1) TYPE C.
*****************EVENTS******************************
DATA : XS_EVENTS TYPE SLIS_ALV_EVENT,
       G_EVENTS TYPE SLIS_T_EVENT.
******************PF STATUS**************************
DATA : PF_STATUS TYPE SLIS_FORMNAME VALUE 'SET_PF_STATUS'.
******************USER COMMAND************************
DATA : USER_COMMAND TYPE SLIS_FORMNAME VALUE 'SET_USER_COMMAND',
       R_UCOMM LIKE SY-UCOMM.
****************SELECTION SCREEN************************
SELECT-OPTIONS : S_VBELN FOR VBAP-VBELN.
***************AT SELECTION SCREEN*********************
AT SELECTION-SCREEN.
PERFORM VALIDATE.
**************START-OF-SELECTION**************************
START-OF-SELECTION.
PERFORM GET_DETAILS.
PERFORM FIELDCAT.
PERFORM LAYOUT.
PERFORM VARIANT.
PERFORM SAVE.
PERFORM EVENTS.
PERFORM ALV_DISPLAY.
*********************FORMS*******************************************
*&      Form validate
      text
--> p1        text
<-- p2        text
FORM VALIDATE .
SELECT SINGLE VBELN
                FROM VBAP
                INTO V_VBELN
                WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
    MESSAGE E000 WITH 'enter valid vbeln'.
ENDIF.
ENDFORM.                    " validate
*&      Form get_details
      text
--> p1        text
<-- p2        text
FORM GET_DETAILS .
SELECT VBELN
         POSNR
         MATNR
         FROM VBAP
         INTO TABLE IT_VBAP
         WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
    MESSAGE E000 WITH 'no details found'.
ENDIF.
ENDFORM.                    " get_details
*&      Form fieldcat
      text
--> p1        text
<-- p2        text
FORM FIELDCAT .
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'VBELN'.
WA_FIELDCAT-OUTPUTLEN = 10.
WA_FIELDCAT-SELTEXT_L = 'SALES DOC'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'POSNR'.
WA_FIELDCAT-OUTPUTLEN = 6.
WA_FIELDCAT-SELTEXT_L = 'ITEM'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-OUTPUTLEN = 18.
WA_FIELDCAT-SELTEXT_L = 'MATERIAL NO'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM.                    " fieldcat
*&      Form LAYOUT
      text
--> p1        text
<-- p2        text
FORM LAYOUT .
WA_LAYOUT-ZEBRA = 'X'.
ENDFORM.                    " LAYOUT
*&      Form VARIANT
      text
--> p1        text
<-- p2        text
FORM VARIANT .
CLEAR G_VARIANT.
G_VARIANT-REPORT = SY-REPID.
ENDFORM.                    " VARIANT
*&      Form SAVE
      text
--> p1        text
<-- p2        text
FORM SAVE .
CLEAR G_SAVE.
G_SAVE = 'A'.
ENDFORM.                    " SAVE
*&      Form EVENTS
      text
--> p1        text
<-- p2        text
FORM EVENTS .
CLEAR XS_EVENTS.
XS_EVENTS-NAME = SLIS_EV_TOP_OF_PAGE.
XS_EVENTS-FORM = 'TOP_OF_PAGE'.
APPEND XS_EVENTS TO G_EVENTS.
ENDFORM.                    " EVENTS
*&      Form TOP_OF_PAGE
      text
FORM TOP_OF_PAGE.
WRITE :/ ' INTELLI GROUP'.
ENDFORM.                    "TOP_OF_PAGE
*&      Form ALV_DISPLAY
      text
--> p1        text
<-- p2        text
FORM ALV_DISPLAY .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
   EXPORTING
I_INTERFACE_CHECK              = ' '
I_BYPASSING_BUFFER             =
I_BUFFER_ACTIVE                = ' '
     I_CALLBACK_PROGRAM             = SY-REPID
     I_CALLBACK_PF_STATUS_SET       = PF_STATUS
     I_CALLBACK_USER_COMMAND        = USER_COMMAND
I_STRUCTURE_NAME               =
     IS_LAYOUT                      = WA_LAYOUT
     IT_FIELDCAT                    = IT_FIELDCAT
IT_EXCLUDING                   =
IT_SPECIAL_GROUPS              =
IT_SORT                        =
IT_FILTER                      =
IS_SEL_HIDE                    =
I_DEFAULT                      = 'X'
     I_SAVE                         = G_SAVE
     IS_VARIANT                     = G_VARIANT
     IT_EVENTS                      = G_EVENTS
IT_EVENT_EXIT                  =
IS_PRINT                       =
IS_REPREP_ID                   =
I_SCREEN_START_COLUMN          = 0
I_SCREEN_START_LINE            = 0
I_SCREEN_END_COLUMN            = 0
I_SCREEN_END_LINE              = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER        =
ES_EXIT_CAUSED_BY_USER         =
    TABLES
      T_OUTTAB                       = IT_VBAP
   EXCEPTIONS
     PROGRAM_ERROR                  = 1
     OTHERS                         = 2
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " ALV_DISPLAY
*&      Form SET_PF_STATUS
      text
FORM SET_PF_STATUS USING EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'Z50651_PFSTATUS' EXCLUDING EXTAB.
ENDFORM.                    "SET_PF_STATUS
*&      Form SET_USER_COMMAND
      text
FORM SET_USER_COMMAND USING R_UCOMM
                            RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
    WHEN 'DC'.
      READ TABLE IT_VBAP INDEX RS_SELFIELD-TABINDEX.
      IF SY-SUBRC = 0.
        SELECT SINGLE MTART
                      FROM MARA
                      INTO V_MTART
                      WHERE MATNR = IT_VBAP-MATNR.
        IF SY-SUBRC <> 0.
   MESSAGE E000 WITH 'NO MATERIAL DESCRIPTION FOR SELECTED MATERIAL NO'.
        ELSE.
          WRITE :/ 'MATERIAL NO :',IT_VBAP-MATNR.
          WRITE :/ 'MATERIAL TYPE :' , V_MTART.
        ENDIF.
      ENDIF.
    WHEN 'BACK'.
      LEAVE TO SCREEN 0.
    WHEN 'EXIT'.
      LEAVE TO SCREEN 0.
    WHEN 'CLOSE'.
      CALL TRANSACTION 'SE38'.
ENDCASE.
REPORT Z_ALV_INTERACTIVE MESSAGE-ID ZMSG_50651
                                LINE-SIZE 100
                                LINE-COUNT 60
                                NO STANDARD PAGE HEADING.
******************TABLES DECLARATION*****************
TABLES : VBAP,MARA.
*****************TYPE POOLS**************************
TYPE-POOLS : SLIS.
****************INTERNAL TABLES**********************
DATA : BEGIN OF IT_VBAP OCCURS 0,
VBELN LIKE VBAP-VBELN, "SALES DOCUMENT
POSNR LIKE VBAP-POSNR, "SALES DOCUMENT ITEM
MATNR LIKE VBAP-MATNR, "MATERIAL NUMBER
END OF IT_VBAP.
****************TEMPORARY VARIABLES******************
DATA : V_VBELN LIKE VBAP-VBELN."SALES DOCUMENT
DATA : V_MTART LIKE MARA-MTART. "MATERIAL TYPE
*****************FIELD CATALOG***********************
DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
       WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
****************LAYOUT*******************************
DATA : WA_LAYOUT TYPE SLIS_LAYOUT_ALV.
***************VARIANT*******************************
DATA : G_VARIANT LIKE DISVARIANT.
****************SAVE*********************************
DATA : G_SAVE(1) TYPE C.
*****************EVENTS******************************
DATA : XS_EVENTS TYPE SLIS_ALV_EVENT,
       G_EVENTS TYPE SLIS_T_EVENT.
******************PF STATUS**************************
DATA : PF_STATUS TYPE SLIS_FORMNAME VALUE 'SET_PF_STATUS'.
******************USER COMMAND************************
DATA : USER_COMMAND TYPE SLIS_FORMNAME VALUE 'SET_USER_COMMAND',
       R_UCOMM LIKE SY-UCOMM.
****************SELECTION SCREEN************************
SELECT-OPTIONS : S_VBELN FOR VBAP-VBELN.
***************AT SELECTION SCREEN*********************
AT SELECTION-SCREEN.
PERFORM VALIDATE.
**************START-OF-SELECTION**************************
START-OF-SELECTION.
PERFORM GET_DETAILS.
PERFORM FIELDCAT.
PERFORM LAYOUT.
PERFORM VARIANT.
PERFORM SAVE.
PERFORM EVENTS.
PERFORM ALV_DISPLAY.
*********************FORMS*******************************************
*&      Form validate
      text
--> p1        text
<-- p2        text
FORM VALIDATE .
SELECT SINGLE VBELN
                FROM VBAP
                INTO V_VBELN
                WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
    MESSAGE E000 WITH 'enter valid vbeln'.
ENDIF.
ENDFORM.                    " validate
*&      Form get_details
      text
--> p1        text
<-- p2        text
FORM GET_DETAILS .
SELECT VBELN
         POSNR
         MATNR
         FROM VBAP
         INTO TABLE IT_VBAP
         WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
    MESSAGE E000 WITH 'no details found'.
ENDIF.
ENDFORM.                    " get_details
*&      Form fieldcat
      text
--> p1        text
<-- p2        text
FORM FIELDCAT .
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'VBELN'.
WA_FIELDCAT-OUTPUTLEN = 10.
WA_FIELDCAT-SELTEXT_L = 'SALES DOC'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'POSNR'.
WA_FIELDCAT-OUTPUTLEN = 6.
WA_FIELDCAT-SELTEXT_L = 'ITEM'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-OUTPUTLEN = 18.
WA_FIELDCAT-SELTEXT_L = 'MATERIAL NO'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM.                    " fieldcat
*&      Form LAYOUT
      text
--> p1        text
<-- p2        text
FORM LAYOUT .
WA_LAYOUT-ZEBRA = 'X'.
ENDFORM.                    " LAYOUT
*&      Form VARIANT
      text
--> p1        text
<-- p2        text
FORM VARIANT .
CLEAR G_VARIANT.
G_VARIANT-REPORT = SY-REPID.
ENDFORM.                    " VARIANT
*&      Form SAVE
      text
--> p1        text
<-- p2        text
FORM SAVE .
CLEAR G_SAVE.
G_SAVE = 'A'.
ENDFORM.                    " SAVE
*&      Form EVENTS
      text
--> p1        text
<-- p2        text
FORM EVENTS .
CLEAR XS_EVENTS.
XS_EVENTS-NAME = SLIS_EV_TOP_OF_PAGE.
XS_EVENTS-FORM = 'TOP_OF_PAGE'.
APPEND XS_EVENTS TO G_EVENTS.
ENDFORM.                    " EVENTS
*&      Form TOP_OF_PAGE
      text
FORM TOP_OF_PAGE.
WRITE :/ ' INTELLI GROUP'.
ENDFORM.                    "TOP_OF_PAGE
*&      Form ALV_DISPLAY
      text
--> p1        text
<-- p2        text
FORM ALV_DISPLAY .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
   EXPORTING
I_INTERFACE_CHECK              = ' '
I_BYPASSING_BUFFER             =
I_BUFFER_ACTIVE                = ' '
     I_CALLBACK_PROGRAM             = SY-REPID
   I_CALLBACK_PF_STATUS_SET         = PF_STATUS
     I_CALLBACK_USER_COMMAND        = USER_COMMAND
I_STRUCTURE_NAME               =
     IS_LAYOUT                      = WA_LAYOUT
     IT_FIELDCAT                    = IT_FIELDCAT
IT_EXCLUDING                   =
IT_SPECIAL_GROUPS              =
IT_SORT                        =
IT_FILTER                      =
IS_SEL_HIDE                    =
I_DEFAULT                      = 'X'
     I_SAVE                         = G_SAVE
    IS_VARIANT                      = G_VARIANT
     IT_EVENTS                      = G_EVENTS
IT_EVENT_EXIT                  =
IS_PRINT                       =
IS_REPREP_ID                   =
I_SCREEN_START_COLUMN          = 0
I_SCREEN_START_LINE            = 0
I_SCREEN_END_COLUMN            = 0
I_SCREEN_END_LINE              = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER        =
ES_EXIT_CAUSED_BY_USER         =
    TABLES
      T_OUTTAB                       = IT_VBAP
   EXCEPTIONS
     PROGRAM_ERROR                  = 1
     OTHERS                         = 2
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " ALV_DISPLAY
*&      Form SET_PF_STATUS
      text
FORM SET_PF_STATUS USING EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'STANDARD' EXCLUDING EXTAB.
ENDFORM.                    "SET_PF_STATUS
*&      Form SET_USER_COMMAND
      text
FORM SET_USER_COMMAND USING R_UCOMM
                            RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
    WHEN 'DC'.
      READ TABLE IT_VBAP INDEX RS_SELFIELD-TABINDEX.
      IF SY-SUBRC = 0.
        SELECT SINGLE MTART
                      FROM MARA
                      INTO V_MTART
                      WHERE MATNR = IT_VBAP-MATNR.
        IF SY-SUBRC <> 0.
   MESSAGE E000 WITH 'NO MATERIAL DESCRIPTION FOR SELECTED MATERIAL NO'.
        ELSE.
          WRITE :/ 'MATERIAL NO :',IT_VBAP-MATNR.
          WRITE :/ 'MATERIAL TYPE :' , V_MTART.
SUBMIT SLIS_DUMMY WITH P_MATNR EQ IT_VBAP-MATNR
                    WITH P_MTART EQ V_MTART.
        ENDIF.
      ENDIF.
    WHEN 'BACK'.
      LEAVE TO SCREEN 0.
    WHEN 'EXIT'.
      LEAVE TO SCREEN 0.
    WHEN 'CLOSE'.
      CALL TRANSACTION 'SE38'.
ENDCASE.
plz reward if useful

Importing Video into iMovie using Mac the Ripper

How do I import video into iMovie using Mac the Ripper? I ripped the video content onto my computer but it was not converted into a file that I can import.

I think it's trend for all users since we can get more funny from digital life. Also it's necessary sometimes for us to save our video or dvd files with other methods, i have no idea but use something like converters.To my experience, mactheripper is not what you want,maybe you can try this dvd ripper for mac.Maybe ripper is illegal, but i just get my oringinal files, and i want to do more with it, that's just it!

I need to get the cluster information using"MSCluster.Cluster" object

Hi,
Please anyone solve my problem ? I need to get the cluster information using"MSCluster.Cluster" object.
Set objCluster = CreateObject("MSCluster.Cluster")
objCluster .open <clustername>
If i run the vbscript " Microsoft VBScript runtime error: ActiveX component can't create object: 'MSCluster.Cluster' " error is thrown.
Kindly explain what is the issue and what can i do ?
-Sundar.

this question was closed and answered a long time ago.
Post questions about WS2012 in th WS2012 forum.
The cluster object will no longer work in WS2012. Use the supplied CmdLets and utilities.
post future questions in the WS2012 forum.
¯\_(ツ)_/¯

Please help. When exporting a 720p video using Quicktime Conversion in FCP it saves some extra temporary files to my computer. The file is called ICMMultiPassStorage. This file gets so large that eventually the program and exporting process crashes.

Please help. When exporting a 720p video using Quicktime Conversion in FCP it saves some extra temporary files to my computer. The temporary file it saves is called ICMMultiPassStorage. This file gets so large that eventually the program and exporting process crashes. I have been able to locate the file using GrandPerspective and close out of FCP to delete it. But when I try exporting the movie again it creates the ICMMultiPassStorage file again. I have made sure my scratch disks are set to my external hard drive so I know that isn't the issue. How do I fix this problem so these temporary files are not being stored on my internal hard drive instead of my external?Thanks!

Try exporting the timeline "using current settings" via Make QuickTime Movie, then submit that clip to Compressor for the transcode. This should be faster and less painful.

How to get MPG into imovie

I have a Sony cyber shot camera with some video on it. Its format is mpg.
imovie will not import mpg. How do I convert it into anything so it can be used?!?!

Download MPEG Streamclip, which is free.
Drag the MPG file into MPEG Streamclip.
Use FILE/EXPORT TO QUICKTIME and choose Apple Intermediate Codec.
Import the resulting file into iMovie using the FILE/IMPORT/FROM FILE menu option.

I need to get back into my itunes account after it was hacked

I need to get back into my itunes account after it was hacked several months ago.
I'd like to redeem a gift card and I set up a new password but it says my ID has been disabled

You ned to contact the iTunes Store and get them to do it.
How to report an issue with Your iTunes Store purchase - http://support.apple.com/kb/HT1933 - working through iTunes application and iTunes Store interface.

How can I easily import Canon Mark III video into iMovie or Final Cut Pro X? Do I need a converter? Thanks!

How can I easily import Canon Mark III video into iMovie or Final Cut Pro X? Do I need a converter? Thanks!

Just click the import button and point it at the camera card.

I have a short homemade film burnt onto a DVD, I now want to import the movie into IMOVIE on my MacBook Pro so that I can edit it, how would I go about doing this? Welcoming any guidance. Thanks in advance.

I have a short homemade film burnt onto a DVD, I now want to import the movie into IMOVIE on my MacBook Pro so that I can edit it, how would I go about doing this? Welcoming any guidance. Thanks in advance.

1. Insert your DVD.
2. Open Disk Utilities (Application> Utilities> Disk Utilities). Highlight your DVD and press "New Image" on the upper toolbar.
3. Choose the location you would like to save your DVD from the drop down menu, "Desktop" is usually the best choice. Then click Save.
4. When finished, your DVD icon will appear on the desktop with the .dmg extension.
5. With iMovie open, double-click the .dmg file you created to mount it. The iMovie import window will then appear asking you to choose. Click Import All and wait for the Import to complete.

I am using QuickTime 7 Pro and want to loop my video. The Loop function is grayed out. Why? How can I loop my video?

I am using Quicktime 7 Pro on a Max Mini to play my video on a gallery monitor. Under View, the Loop option is grayed. Why? I need to play the video in a continuous loop all day. Thank you.

Loop appears to be "broken" in QuickTime Player Pro and 10.7.4.
It's been fixed in 10.8 and also works in QuickTime 10, 10.1 and 10.2.
Use 10.1 on your machine if you need to loop your playback.

Record audio file in a wav file format using QuickTime 7 Pro for Windows?

Is it possible to record audio file in a wav file format using QuickTime 7 Pro for Windows? The system I want to upload audio files that I record to requires they be in a wav file format / PCM - 112025kh / 8 bit mono / 11.05khz
Something tells me no...and I bought this upgrade for nothing...GRRRRRRR

QuickTime Pro for Windows allows you to make audio recordings from some input devices.
You can then "export" these new files to .wav format at any setting you choose.

HELP! need to get DV into imovie using Quicktime 7 pro

Similar Messages

Maybe you are looking for