HELP!! Need to get my program back

Hello,
I've been writing a computer program all day and after compiling and running it worked perfectly. I then output the data as main.c and overwrote my program.
Is there any way of getting this back? Are there any hidden files in mac folders like in Windows? I've still got the output file (a.out) but I don't know how to get the source code from it, or if it's possible at all.
Please help.
Thanks

Thanks for the help but I was using xcode to write. I do save the programs regularly but I only back up once the program is finished and correct.
Is there no way to get the code from the a.out file? I thought that hackers used that technique to get the source code for programs. It's probably futile and I've started from scratch now anyway.
Thanks again

Similar Messages

Help, need to get deleted items back.

I have items purchased through the iTunes store that were accidentally deleted, how do I get them back? They were fully downloaded so I can't "Check for Purchases", they just got deleted and they shouldn't have. Some of them were deleted by someone who didn't know what they were doing, and some were deleted by children smashing the keyboard and hitting the delete button. They aren't in the trash bin and I can't find any way to get them back! Do I have to buy them again?

Since you purchased it off iTunes then use the iPod + iTunes "transfer purchases" feature. Plug your iPod in and iTunes (it has to be iTunes 7.0 or higher) and iTunes should ask you immediately. Or you can option click on the iPod in the source list and click on transfer purchases. Of course, I'm assuming that you have an iPod. And for preventing future accidents like this I recommend activating "require password to wake this computer from sleep or screen saver." This option is in System Preferences>Security. Of course you'll also have to activate screen saver or automatic sleep after x amount of minutes.

Just bought refurbished mac, and there's no GarageBand or iMovie and such. I got no disks with the laptop!! Is there any way to get these programs back?

is there any way to get the programs back??!!??
if not, are there any good free programs to replace these ones?

I called Apple Customer Support (1- (800) 767-2775) to check on how much they charge for the gray restore disks that originally came with the MacBook and was quoted $16 dollars per disk plus S & H. Which would be $32 for the two disks. Just give them the serial number of your MacBook and they'll know which ones you need. With the original disks you also get the iLife that was current when your MacBook was bought included on the #2 disk.
If you only want iPhoto or other single apps from iLife '11 you can get them from the App Store if you're upgraded to 10.6.8. iPhoto, iMovie or Garage Band for $15 each
Or you can get an iLife DVD on eBay. http://www.ebay.com/sch/i.html?_trkparms=72%253A1234%257C66%253A2%257C65%253A12% 257C39%253A1&_sacat=0&_sc=1&_nkw=apple%20ilife%2011&_sop=12

After reinstalling lion, missing ilife, how do I get the program back?

after reinstalling lion, missing ilife, how do I get the program back?

No, you don't. Your new purchase is connected to your Apple ID, so you will not have to pay to purchase the iLife apps that came with the computer.
See OS X Lion: About Lion Recovery .

Help needed in Logical Database Programming

Hello Gurus,
I am working on a Report on ASSET ACTIVITY BY DATE RANGE .
The program is copied from std. program S_ALR_87011990.
The above std. program displays for the whole financial year. This is modified for a particalar period range in the new leveraged program.
My question is in the below code.
We are fetching data using LDB ADA. The statement "GET anlcv" works fine here, I mean Sy-subrc is 0 and anlcv structure has some data in it.
When it comes to statement "GET anepv" in the below code, we are not getting any data into that structure and sy-subrc NE 0. Then it is skipping all the get statements and directly going to statement " PERFORM abga_simulieren.".
My logic lies in between this Get statement and the perform statement. When i see it in debugging mode my statement is not executed at all.
What needs to be done. Please anyone help me.
GET anlcv.
CHECK select-options.
MOVE anlcv TO sav_anlcv.
GET anepv.
CHECK select-options.
Nur Bewegungen des Jahres des Berichtsdatums durchlassen.
CHECK anepv-bzdat GE sav_gjbeg.
CHECK anepv-bzdat IN so_bzdat. "Added for SIR-3132
Bewegungen in SAV_ANEPV sammeln.
MOVE anepv TO sav_anepv.
APPEND sav_anepv.
GET anlb LATE.
Check auf Bestandskonto bei Gruppensummen erst hier, wegen
fehlender Abgänge/Umbuchungen
IF NOT summb IS INITIAL.
IF NOT anlav-ktansw IN so_ktanw.
REJECT 'ANLAV'.
ENDIF.
ENDIF.
ANLCV aus Save-Area zurueckholen.
CHECK NOT sav_anlcv-anln1 IS INITIAL.
MOVE sav_anlcv TO anlcv.
Abg-Simu: Abgang simulieren.
PERFORM abga_simulieren.
Promise to reward points
Regards
Mac

1) delete line CHECK anepv-bzdat ge sav_gjbeg.
2) test with an asset , which has movements (purchases) in your intervall so_bzdat.
otherwise post a movement (e.g. transaction type 100) with tcode abzon
A.

My images are still in the catalog, but the Folder name has disappeared. I need to get the folder back into my structure with the images in place

Help: I have a very well defined folder structure. Folder are located in a Master location and organized by State. Inside of these are my master RAW file folders organized by location. For example: West Virginia > BIRI_RAW_2012, BLFA_RAW_2013, NERI_RAW_2013, etc. After I set up the masterful following a shoot, I go to LR and import the images. At one time I inadvertently imported the NERI_RAW_2013 masterful set as a subset of something else and it was not appearing in my LR Module in the organization I prefer. So I went to my master folders on my drive and moved the NERI file into the West Virginia state folder. When I went back to LR, as expected the NERI folder was grey with a question mark. So I right clicked to find the files and relink, and it did not work. The folder name disappeared. The RAW files are still in the catalog and show up in a missing photos search. I can't reimport because they are already there. I just need to restore my folder structure and get the images back to the right spot.

So I right clicked to find the files and relink, and it did not work. The folder name disappeared.
It didn't disappear, it moved (because you told Lightroom to move it). It moved from the incorrect folder location, to the new folder location. Please look in the new folder, in whatever location it is in, not in the old folder and the old location, and you will find the photos.

I need to get the movies back to APPLE TV and off my computer

So I finally, after 6 months get the ATV to finally show up and work in my Itunes, only by connecting it directly to my computer via ethernet. But instead of transferring the TV shows from my computer to the apple tv, the ATV moves all of its content to my Mac computer leaving me with a whopping 246MB left on my hard drive.
Why did my shows not transfer to the ATV, because apparently ITUNES couldn't connect to the internet to verify I owned them. Why could it not connect to the internet? Because the ATV was plugged into the Ethernet. And Why was the ATV plugged into the Ethernet, because it won't connect any other way via the wireless network we have set up for whatever reason.
Here is my immediate dilemma, I have ATV movies and shows clogging up my computer. I would love to delete them, but the ATV literally removed them from itself.
How do I get my stuff back on to the ATV? Somebody, please anybody, help.

Why did my shows not transfer to the ATV, because apparently ITUNES couldn't connect to the internet to verify I owned them. Why could it not connect to the internet? Because the ATV was plugged into the Ethernet. And Why was the ATV plugged into the Ethernet, because it won't connect any other way via the wireless network we have set up for whatever reason.
how much space do you have on your appleTV? maybe you don't have any space left to put those shows from your computer... how do you have syncing set up on your computer?
Here is my immediate dilemma, I have ATV movies and shows clogging up my computer. I would love to delete them, but the ATV literally removed them from itself.
this is actually how it is supposed to work... the files on your computer are meant to be the masters and you appleTV syncs with these... not the other way around. if you buy something via your appleTV it gets pushed back back to your computer.
the appleTV is not meant to act as external storage or backup... there is no easy way to get files off of your appleTV if the drive on your computer fails.. there is no way to backup files if you only store them on your appleTV.. if the drive fails on your appleTV or you experience trouble on your appleTV and are forced to do a restore... BOOM! you just lost everything on you appleTV.
unless you can afford to loose all of your media files via a drive failure... you need a backup strategy... store your files on a 'working' drive on you computer and use time machine to backup to backup drive. only use appleTV to temporarily store media files that you want available when you computer is off... that's all it's meant for.

Need to get Keyboard Controls Back

Forum;
I've been using PhotoShop since 2.0 in the early 90's, and I've never seen an upgrade as problematic as CS5. I decided pretty quickly after installing the CS5 package nearly a year ago that I would be better of staying with PS CS3, which was more stable. I've starting trying to get accustomed to PS CS5 again recently and am experiencing the same frustrations I was encountering before, having my progress interupted with some out-of-the-blue weirdness and having to spend untold amounts of time figuring out what the H it's doing this time. The problem this morning is that all my key controls seem to have mysteriously been disabled. I'm talking about those controls where holding the shift key down activates the grabber tool for moving the image around in the viewport. Or holding the shift + command keys to activate the zoom function. I need these and they've just decided to vanish. I've reset my preferences, which didn't work, except to cause me to rebuild my workspace.
Would someone please tell me how to get this functionality back?
Apologies for my frustrtation. Thanks much.
Cayce

except to cause me to rebuild my workspace.
So you have never saved your workspace?
figuring out what the H it's doing this time.
Consulting the Help might help.
Check out »Temporarily zoom an image« under »Viewing images«:
holding the shift key down activates the grabber tool for moving the image around
Do you mean the spring-loaded Hand Tool? You could try the spacebar.
holding the shift + command keys to activate the zoom function
command-spacebar

Help needed in getting the previous Quarter Data

Hello folks,
I have this procedure where i have to modify the current procedure in the following manner:
I need to get rid of the variables p_start and p_end so that i cannot see them in the crystal report and include the Frequency in the procedure to get the Data based on the Dates.
and Main requirement is" If the Frequency is Quarterly " it should get the previous quarter Data, if "Frequency is monthly" it should return the previous month data.Can anyone please let me know where shud i make changes. Am including the procedure for refernce. Any help is appreciated
Thanks a millioin,
CREATE OR REPLACE PROCEDURE hcsc_recovery_report_h(report_record in out cr_return_types.gen_cursor,
p_start       string,
p_end         string)
IS
v_startdate date;
v_enddate date;
BEGIN
v_startdate := to_date(p_start, 'YYYY/MM');
v_enddate := last_day(to_date(p_end, 'YYYY/MM'));
open report_record for
select --distinct r.recovery_id
r.event_id,
r.event_case_id,
c.client_id,
c.client_code,
c.client_name,
b.branch_group_code,
b.branch_group_description,
g.employer_group_code,
g.employer_group_name,
e.client_policy_identifier,
e.date_of_incident,
e.event_type_code,
sum(nvl(r.amount, 0)) as amt_received,
nvl(sum(case
when r.amount >= 0 then
rd.fees
else
rd.fees * (-1)
end),
0) as fees,
ec.close_date, *001* commented
(case
when ec.close_date <= to_date(to_char(v_enddate, 'MMDDRRRR') || '235959',
'MMDDRRRR HH24MISS') then
ec.close_date
else
null
end) as close_date, --*001* added
get_case_value(ec.event_id, ec.event_case_id, v_enddate) as case_value,
nvl(etl.fee_percent_flag, 'N') workmans_comp,
max(to_char(r.recovery_date, 'FMMonthYYYY')) Year_Month,
max(to_char(r.recovery_date, 'YYYYMM')) Y_M,
max(to_date(to_char(r.recovery_date, 'MMYYYY'), 'MM/YYYY')) date_MY
from recovery r,
recovery_detail rd,
event e,
client c,
branch_group b,
employer_group g,
event_case ec,
event_type_lookup etl
where r.event_id = e.event_id
and r.event_case_id = ec.event_case_id
and ec.event_id = e.event_id
and rd.recovery_id(+) = r.recovery_id
and r.recovery_date between v_startdate and
to_date(to_char(v_enddate, 'MMDDRRRR') || '235959',
'MMDDRRRR HH24MISS')
and e.client_id = c.client_id
and g.client_id = c.client_id
and b.client_id = c.client_id
and g.employer_group_id(+) = e.employer_group_id
and b.branch_group_id(+) = g.branch_group_id
and e.event_type_code = etl.event_type_code -- SST 130852 04/14/09
group by r.event_id,
r.event_case_id,
c.client_id,
c.client_code,
c.client_name,
b.branch_group_code,
b.branch_group_description,
g.employer_group_code,
g.employer_group_name,
e.client_policy_identifier,
e.date_of_incident,
e.event_type_code,
ec.close_date,
get_case_value(ec.event_id, ec.event_case_id, v_enddate),
nvl(etl.fee_percent_flag, 'N')
having sum(nvl(r.amount, 0)) <> 0
order by c.client_code,
b.branch_group_code,
g.employer_group_code,
r.event_case_id;
Edited by: user11961230 on Oct 20, 2009 9:02 AM

user11961230 wrote:
1. I want to get rid of the p_start and p_end. So how do i declare the v_startdate and v_enddate in the following part?
v_startdate := to_date(p_start, 'YYYY/MM');
v_enddate := last_day(to_date(p_end, 'YYYY/MM'));I'm not sure what you mean by "declare".
In PL/SQL, "declare" means state (at the beginning of a block) that there will be a certain variable with a certain name (such as v_startdate) and datatype (such as DATE). You're already declaring the variables v_startdate and v_enddate correctly, right before the BEGIN statement.
Declaring a variable is not the same as initializing it, that is, giving it a value for the first time. Your next question seems to be about initializing..
2. where exactly shud i include the logic that u have mentioned. sorry a dumb questionIn place of the two assignment statments that reference p_start and p_end.
3. This time am gonna use frequency instead of report_type so that i will get rid of the p_start and p_end from the procedure.Do you mean you want to pass an argument (called frequency) that tells if you want a quarterly or a mionthly report, just like the variable report_type in my example?
If so, replace report_type in my example with frequency.
I think you want something like this:
CREATE OR REPLACE PROCEDURE hcsc_recovery_report_h
(      report_record         in out     cr_return_types.gen_cursor
,      frequency         IN           VARCHAR2
IS
     -- Declare local variables:
     v_startdate     date;
     v_enddate      date;
BEGIN
     -- Initialize v_startdate and v_enddate, depending on frequency
     IF frequency = 'QUARTERLY'
     THEN
          v_startdate := TRUNC ( ADD_MONTHS (SYSDATE, -3)
                                       , 'Q'
          v_enddate := TRUNC (SYSDATE, 'Q');
     ELSIF frequency = 'MONTHLY'
     THEN
          v_startdate := TRUNC ( ADD_MONTHS (SYSDATE, -1)
                         , 'MM'
          v_enddate := TRUNC (SYSDATE, 'MM');
     END IF;
     --   Subtract one second from v_enddate
          v_enddate := v_enddate - ( 1
                                        / (24 * 60 * 60)
     open report_record for
     select --distinct r.recovery_id
            r.event_id,
     and     r.recovery_date BETWEEN v_startdate
                     AND       v_enddate
     ...When you post formatted text on this site (and code should always be formatted), type these 6 characters:
(small letters only, inside curly brackets) before and after sections of formatted text, to preserve spacing.
Edited by: Frank Kulash on Oct 20, 2009 2:37 PM
Changed query to use BETWEEN

Help needed, M getting this message sandbox environment error no test user account, when downloading any application from iTunes, friend told me to sign out and sign in iTunes it might solve the problem but instead I cannot login I to my itune account.

Help needed,
I am getting this message sandbox environment error no test user account, when downloading any application from iTunes, friend told me to sign out and sign in iTunes it might solve the problem , and i triyed it but still I cannot login I to my itune account. Same message keeping. Popping up, this problem started supricly today.

Take a look at the instructions here.
http://www.technogal.net/2012/03/this-is-not-test-user-account-please.html

Where do I find the websites stored as my homepage and how do I select one of them if I need to get just it back and not all of them?

I have three websites as my homepage, but often once I have worked within one tab for awhile and gone to other sites, I need to get back to the site that is there when my homepage tabs first pop up. I may not have even touched the other two tabs, but if I click on the Home button, I get three new tabs with the three websites that make up my homepage. I then have to delete three tabs to keep just what I want. In IE, the Home button has a pulldown, which allows me to select any one of my homepage websites, and loads that site on the current tab. Can this be done with FF?

The only way I know to achieve this would be to create three separate bookmarks on the Bookmarks toolbar and click on a one that you want to load in the current tab. You can also try to right-click the Back arrow and click the entry at the bottom of the list to return to the first page.

Help needed in getting file url

Hi,
I work in a project where i need to get the url of the specified file. The code for that is as,
URL fileURL = Thread.currentThread().getContextClassLoader().getResource();
The required resource is available in the concerned path. But the file url returns null
Can you please help in solving the problem.
Thanks and Regards,
Mclaren

Where (text area, label, button) do you want it to do it.
What do you want it do (browse within the local text area, open the default browser...)
Text area, use above, JButton (or alike) and open default browser, use ActionListener and JDIC.

Need to get deleted messages back!!! urgently

Hey accidently deleted all messages and imessages froma contact i would like to get them back! is this possible? if so how do i do it? i have been backing up my iphone all the time.... however my bro did a delete back ups thing... the in itunes>edit>preferences etc.. way does this effect it at all?
Very very important messages from that contact and need to get them back asap!!!!!

If you deleted the SMS on your phone, & your iPhone backup has also been deleted, there is no way to restore this SMS.

HT6154 I deleted my Imexchange from my phone I need to get the data back with the app

I deleted a IMexchane App from my phone by mistake. I need to get the app and the data back.
Please Help

Talk to the app developer. From what I can see, that app is designed to sync with Outlook. The data should still be in Outlook

Aperture 3 screen view. I have the adjustments, etc. on the left side and the picture on the far right side. The middle of screen is black. I need to get the picture back in the center of screen

I have the adjustments, etc. on the left side of the screen. The picture is on the far right side of the screen. The middle of the screen is all black.How do I get the picture back in the middle of the acreen. I believe I must have hit a button that moved the picture to the far right.

On the Mac......
Open up Macintosh HD > Applicatons > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the small window that appears
Click the Network tab at the top of the next window
Change the setting for Router Mode from the current DHCP and NAT to read Off (Bridge Mode), then click Update at the lower right of the window, and wait a full minute for the Time Capsule to restart to a green light.
Then.....very important
Power off the Time Capsule and your Arris modem/router for a few minutes
Start up the Arris first, and let it run a few minutes by itself
Start up the Time Capsule next the same way
Your network will now be correct, and your printing capabilities will improve.
If Time Machine backups do not occur now, post back and we will tackle that next.

HELP!! Need to get my program back

Similar Messages

Maybe you are looking for