HELP -Need to record in 640x480

I need to take Captivate 2 shots of Windows XP in 640x480
resolution. (Note: It will not help me to resize to 640x480 after
recording )
XP normally allows a minimum resolution of 800x600. I've been
told to choose the compatibility tab in preferences for the
application startup, but Captivate doesn't have a compatibility tab
(that I can find).
I reset the DPI from 96 to 125 on the advanced screen of the
Display. This gives a pretty good simulation of 640X480 - but
Captivate won't run after I do this!
Does anyone know a way to record a 640x480 screen with
Captivate 2 in XP?

Hello Kevin,
I have to use a work around in XP to record different
resolutions as well.
Try this out-
Right-Click on your Windows desktop.
Select Properties.
Select the Settings tab.
Click the Advanced button (lower right side).
Select the adapter tab.
Click list all modes.
You should now see a mode selection window, like the one in
the screenshot.
(Make sure that the refresh rate is the same as your
monitor's - Most LCDs are 60Hz, and VGAs are usuallly 72Hz for
640x480 resolution)
Select the desired mode and click "Ok".
http://i55.photobucket.com/albums/g160/wxman1995/list_all_modes.png

Similar Messages

Search help needs more records than 500 or 5000

I have a requirement to create search help on a non primary key field . So I need to work on search help exit to remove all the repeating and blank values . The problem I am facing rite now is that search help gets only 500 records by default and 5000 if we leave the restriction field blank . I need to get all the records which is approx more than 100000 and get only the unique values .
Please let me know how I can increase the number of record more than 5000
Regards,
Tashi

Hi Tashi,
The following approach might work out in y our case by overwriting the data fetch functionality of the standard Search help
1. Define internal table of desired structure, in the way you get the data from DB table
2. use your custom function module / class method or select statement to get the desired data into the newly
    defined   internal table
3. apply required sorting / filtering / formatting as per the requirements
3. loop through the resultant data in the internal table and append the records to standard internal
    table / parameter RECORD_TAB of the Search help exit. Please make a note that RECORD_TAB has the
    structure field STRING which needs to be populated with the correct offsetting..for example, if the first field
     is of 10 characters and second field of 5 characters, it should be populated in the following way
loop at itab into ls_itab.
wa_record-string+0 = ls_itab-field1.
wa_record-string+10 = ls_itab-field2.
wa_record-string+15 = ls_itab-field3.
append wa_record to record_tab.
clear wa_record.
endloop.
EXIT.
Please try this approach and let us know.
hope this helps.
-Sajan Joseph.

Help needed to record an experiment for a running process

Hi Team,
While trying to record an experiment through Profile Running process option, we found issues in generating an experiment file.The error stated that the directory wasn't writable but we made sure all the permissions are available for the folder. The application is a C++ implementation.
Have attached the output message:
Running: /x/opt/SolarisStudio12.4-beta_mar14-linux-x86/lib/analyzer/lib/../../../bin/collect -P 16824 -o test.1.er -d /x/web/STAGE2LP14/xxxx -p on -S on
name test. is in use; changed to test.4.er
Reading xxxx
Reading ld-linux.so.2
name test. is in use; changed to test.4.er
Reading libppfaketime.so.1
Reading librt.so.1
Reading libpthread.so.0
Reading libcrypt.so.1
Reading libz.so.1
Reading libdl.so.2
Reading libkrb5.so.3
Reading libicui18n.so.36
Reading libicuuc.so.36
Reading libicudata.so.36
Reading libicuio.so.36
Reading libexpat.so.0
Reading libqpidmessaging.so.3
Reading libqpidtypes.so.1
Reading libxerces-c.so.27
Reading libstdc++.so.6
Reading libm.so.6
Reading libc.so.6
Reading libgcc_s.so.1
Reading libk5crypto.so.3
Reading libcom_err.so.2
Reading libkrb5support.so.0
Reading libkeyutils.so.1
Reading libresolv.so.2
Reading libqpidclient.so.6
Reading libuuid.so.1
Reading libselinux.so.1
Reading libqpidcommon.so.6
Reading libsepol.so.1
Reading libboost_program_options.so.2
Reading libboost_filesystem.so.2
Reading libsasl2.so.2
Reading ISO8859-1.so
Reading libcollector.so
Attached to process 16824
t@4133656384 (l@16824) stopped in __kernel_vsyscall at 0xffffe410
0xffffe410: __kernel_vsyscall+0x0010:    popl     %ebp
Process ID: 12981
dbx: The HW counter configuration could not be loaded
Elapsed Time: 85 ms
Run "collect -h" or "er_kernel -h" with no other arguments for more information on HW counters on this system.
Execution completed, exit status is 0
dbx: Creating experiment database /x/web/STAGE2LP14/xxxxxx/test.4.er (Process ID: 13736) ...dbx: Creating experiment database /x/web/STAGE2LP14/xxxxxx/test.4.er (Process ID: 13736) ...
dbx: Experiment directory not writable
Experiment aborted
error at line 16 of file 'dbxcol3wC1XU'
detaching from process 16824
Even we tried manually using the collect command the process started successfully but while terminating the process using CTRL+ENTER we got coredump error
f7f40000-f7f50000 rwxp f7f40000 00:00 0
f7f50000-f7f6b000 r-xp 00000000 fd:00 589838                             /lib/ld-2.5.so
f7f6b000-f7f6c000 r-xp 0001a000 fd:00 589838                             /lib/ld-2.5.so
f7f6c000-f7f6d000 rwxp 0001b000 fd:00 589838                             /lib/ld-2.5.so
ffbe7000-ffbfc000 rwxp 7ffffffe9000 00:00 0                              [stack]
ffffe000-fffff000 r-xp ffffe000 00:00 0
dbx: internal error: signal SIGABRT (sent by tkill)
dbx's coredump will appear in /tmp
We arent sure how to terminate the collect process manually.
/x/opt/SolarisStudio12.4-beta_mar14-linux-x86/lib/analyzer/lib/../../../bin/collect -P 16824 -o test.1.er -d /x/web/STAGE2LP14/xxxx -p on -S on
Please help us
Thanks
Sattish.

Hi Darryl,
We tried with the below mentioned option
./collect -P 24829 -o /tmp/test.9.er But still the same error
NOTE: No J2SE[tm] was specified for checking.
    The following J2SE[tm] versions are recommended:
      J2SE[tm] 1.7.0_25 or later 1.7.0 updates (preferred)
NOTE: You can download and install the J2SE[tm] from http://www.oracle.com/technetwork/java/javase/downloads.
WARNING: Java data collection may fail: J2SE[tm] version is unsupported.
Reading atlasserv
Reading ld-linux.so.2
Reading libppfaketime.so.1
Reading librt.so.1
Reading libpthread.so.0
Reading libcrypt.so.1
Reading libz.so.1
Reading libdl.so.2
Reading libkrb5.so.3
Reading libicui18n.so.36
Reading libicuuc.so.36
Reading libicudata.so.36
Reading libicuio.so.36
Reading libexpat.so.0
Reading libqpidmessaging.so.3
Reading libqpidtypes.so.1
Reading libxerces-c.so.27
Reading libstdc++.so.6
Reading libm.so.6
Reading libc.so.6
Reading libgcc_s.so.1
Reading libk5crypto.so.3
Reading libcom_err.so.2
Reading libkrb5support.so.0
Reading libkeyutils.so.1
Reading libresolv.so.2
Reading libqpidclient.so.6
Reading libuuid.so.1
Reading libselinux.so.1
Reading libqpidcommon.so.6
Reading libsepol.so.1
Reading libboost_program_options.so.2
Reading libboost_filesystem.so.2
Reading libsasl2.so.2
Reading ISO8859-1.so
Reading libcollector.so
Attached to process 24829
t@4133668672 (l@24829) stopped in __kernel_vsyscall at 0xffffe410
0xffffe410: __kernel_vsyscall+0x0010:   popl     %ebp
dbx: The HW counter configuration could not be loaded
Run "collect -h" or "er_kernel -h" with no other arguments for more information on HW counters on this system.
dbx: Creating experiment database /tmp/test.9.er (Process ID: 7769) ...
dbx: Experiment directory not writable
Experiment aborted
error at line 15 of file 'dbxcol61PZeE'
detaching from process 24829
Could you please review
Thanks
Sattish.

Help needed with project setting (640x480 30FPS)

Hi
I am sorry if this is a simple question, I am new to PE and video editing
I have just purchased PE9 and working on a small project to put togather a family movie.
The vide sources is from a Panasonic DMC-FZ28 camera, and looking at the file properties it is 640/480 (30 or 29.xx FPS depending how you look). the file is a .mov file.
I keep reading about how important getting the project setting but I can not find anything suitable which is surprising as the format is not particulary odd.
Having checked a few postings, I've seen recommendations to selects NTSC DSLR 480p 640x480, however, when I start a new project and look at projects settings avaiable under NTSC/DSLR there is a 480p 640x480 option but at 60 (or 59.94) FPS.
Can you please recommend an appropropriate setting
Many thanks

Have a look at part 1 of my Basic Training for Premiere Elements tutorial series for Premiere Elements support site Muvipix.com.
It will show you how to set up your project for NTSC 640x480p60 DSLR video (about as close as you can get to your specs).
If that doesn't work, try experimenting by shooting in 1280x720 and using that DSLR setting.
Also ensure that you have the latest version of Quicktime from Apple.

Help needed in Recording CA02 Transaction (Change Routings).

What fields are to be filled mandatory, whille recording CA02 Transaction (Change Routings),
Please Guide.
Thanks in advance.
Moderator message: please do more research before asking, show what you have done yourself when asking.
Edited by: Thomas Zloch on Nov 1, 2011 10:38 AM

the same fields that you have to fill if you maintain the routings manually.

Help Needed - My BB 8520 Curve has this message-CRTranRec::GetLinkedRecordID:Invalid linked record id while sychronisation using the desktop software

Hi!
Need some help with the same:
Help Needed - My BB 8520 Curve has this message-CRTranRec::GetLinkedRecordID:Invalid linked record id while sychronisation using the desktop software

Hi sameer197301 and welcome to the BlackBerry Support Community Forums!
To clarify, are you seeing this message displayed on your BlackBerry® smartphone or on your computer?
Thanks.
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Recording help needed

recording help needed. I'm a beginner, imac, logic express and helix board 12 firewire.
I have recorded my daughter voice only ok, BUT when i import audio file to track 1 as backing track and my daughter is using headphones from the helixboard to sing to she does not record to track 2 when all in enabled.
Should her headphone come from the imac and not the helix board
Regards
Paul

Check the recording channel in the channel strip.
It must be set the same as the audio interface channel.
cheers
rob

Help needed to optimize the query

Help needed to optimize the query:
The requirement is to select the record with max eff_date from HIST_TBL and that max eff_date should be > = '01-Jan-2007'.
This is having high cost and taking around 15mins to execute.
Can anyone help to fine-tune this??
   SELECT c.H_SEC,
                c.S_PAID,
                c.H_PAID,
                table_c.EFF_DATE
   FROM    MTCH_TBL c
                LEFT OUTER JOIN
                   (SELECT b.SEC_ALIAS,
                           b.EFF_DATE,
                           b.INSTANCE
                      FROM HIST_TBL b
                     WHERE b.EFF_DATE =
                              (SELECT MAX (b2.EFF_DATE)
                                 FROM HIST_TBL b2
                                WHERE b.SEC_ALIAS = b2.SEC_ALIAS
                                      AND b.INSTANCE =
                                             b2.INSTANCE
                                      AND b2.EFF_DATE >= '01-Jan-2007')
                           OR b.EFF_DATE IS NULL) table_c
                ON table_c.SEC_ALIAS=c.H_SEC
                   AND table_c.INSTANCE = 100;

To start with, I would avoid scanning HIST_TBL twice.
Try this
select c.h_sec
     , c.s_paid
     , c.h_paid
     , table_c.eff_date
from mtch_tbl c
left
join (
          select sec_alias
               , eff_date
               , instance
            from (
                    select sec_alias
                         , eff_date
                         , instance
                         , max(eff_date) over(partition by sec_alias, instance) max_eff_date
                      from hist_tbl b
                     where eff_date >= to_date('01-jan-2007', 'dd-mon-yyyy')
                        or eff_date is null
           where eff_date = max_eff_date
              or eff_date is null
       ) table_c
    on table_c.sec_alias = c.h_sec
   and table_c.instance = 100;

Help Needed REP-1800 Formatter error VGS-1701 Not enough memory

Hi. Gents
Help needed
I’m working on a Report, it gets some 2 million records and the report pages are approximately 52,000
It works fine if the pages are lesser then 48,000 or the data is less let say one and half a million, the problem occurs only after 48000 + pages formatted.
Report is generated successfully when trying to go to the last page it throw an error.
REP-1800 Formatter error
VGS-1701 Not enough memory
I have already gone through the metalink DOC Id 95505.1 as well as OTN
But all in vain,
Any comments or help much appreciated.
Details are:
Reports 6i (Clients/Server) on Windows platform
(Windows XP Professional with SP 2)
Database: Oracle9i Enterprise Edition Release 9.2.0.5.0
Computer:
Pentium(R) 4, CPU 3.00GHz, 1 GB of RAM
Still 20 GB free space
Thanks & Regards

I don't see the point in making a report with more than 48,000 pages, I think Al Gore will not be happy when you start printing it...
The problem might be caused by the fact that Reports needs to format all output at once, and then even 1GB of memory will probably be not enough. Formatting all pages at once is needed if you use pagination with displaying total number of pages. If you have this, try to get that out of the report definition and try again.

Need to record what I hear from speakers with other program

I need to record what I hear with a program that can record a programs video and audio.
Is there any way to set speakers as the recording source, instead of mic, or can I set it to both speakers and mic?
If not, then we need an upgrade to our audio mixer that allows this to be done so we can use programs like Snagit or Camtasia to record our music programs playing. The way it is now, I can only set the mic as the recording source, so I miss the audio the program is playing but get the video of the program playing it.
compact pressario cq60-210us

Hey guys,
I tried to do some research and it looks like you need to have an external device and its drivers, such as an external microphone, installed on the computer to record audio that can be saved as a sound file. Another Suggestion is to try an auxiliary spliter for your headphones and external speakers?
What software are you using to record your game?
If anyone knows anything different, please let me know.
Thank you for being a part of the Lenovo Family,
Catie
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Donate KUDOS and Click "Accepted Solution"

Data uload to ODS ending up with an error. URGENT HELP NEEDED!!!!!!

Hi
My Sceniro is Full load from ODS1 to 5 other ODS. Iam uploading the data to other 5 ODS by selecting 1 ODS at a time.
Problem i am facing is upload is ending up with error mesg. Error Mesg are
<b>Error 8 when starting the extraction program - R3019
Error in Source System - RSM340
Req xxx in ODS2 must have QM ststus green before it is activated - RSM1110</b>
I have seen the the OSS notes for given error no, but they are not applicable to me. what could be the other possible solution.
In detail tab of the monitor i see red light at Extraction step and Subseq. processing.
Its quite urgent bcoz this error is occuring in Production system.
Plzzzz urgent help needed.
Thanks
Rohini
Message was edited by: Rohini Garg

rohini,
go to RSA1->Modeling->Source Systems and right-click on your BW system, and click on 'Replicate Datasources'.
also, go to the ODS that's causing the problem (via RSA1->InfoProvider and go to your ODS), right click and click on 'Generate Export Datasource'.
one more thing, make sure that all your record/s in the source ODS is active. if you're not sure manage its contents and click on 'Activate'. if there are any entries in the the next screen that comes up, you need to activate it first, then try everything again.
let me know what happens. also try to look for error messages in ST22 and SM21 that may be related to this and post whatever possible error you see there here.
ryan.

I need to record client IP with the Activity Data Collector.

I need to record the user activity with the Activity Data Collector.
One of the data record is the IP address of the client.
How I can do?
In support of the log format that data does not exist.
[http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/8ab49e1b141e1ee10000000a42189d/content.htm]

Hi,
You are absolutely right, this is simply not supported.
Anyhow, in most cases this might also not make too much sense, as the access to the server often (almost "normally") goes via some kind of proxy; in such a case, one would only see one (or two or so if the proxy is clustered itself) IP address in the logs.
On the other hand, just in such scenarios, the proxy is normally able to forward the original client IP address as an additional header variable. If this is the case, then "rfo.rh(X-Forwarded-For)" could do the trick.
Hope it helps
Detlev

Help Needed - Even after lodging "Presidential Complaint"

Help needed please!!To make a long story short I have been through nothing but aggravation the past week trying to get my phone working. Service call on 7/6 to install Fios Internet, TV and phone. Internet and TV work fine, but Phone has no dial tone, going on a week and a half now. Tried contacting the account rep who set up my account, her supervisor as well as tech support on numerous occassions.
They set a dispatch for yesterday, and when the tech called me to say he was here, he was at an address i moved out of 4 years ago, in another state.I get a call from someone saying the service request was being closed and I need to call in with the correct address, after telling that rep I would not do that, that Verizon should make the updates based on my TV/Internet records, she hung up on me. Called back into Tech Support and the best they could do was an appointment for tomorrow. I then called the Corporate number and spoke with someone who opened a "Presidential Complaint" and requested an expedited call.. well i have heard nothing since then other than an automated call earlier today sayin my original service request will be kept. Needless to say I'm very upset that after a week and a half I still have no phone service and it doesn't seem like anyone is real willing to help me. I'm sure I'll get billed in full even though one of the 3 services I'm paying for hasn't been working in a week and a half..

Hi jkoen77,
Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. The title of your post is the link. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe". Please keep all correspondence regarding your issue in the private support portal.

I need to record a video while music app is playing

HI, I couldn't find the answer anywhere, and maybe it's not a common question.
I need to record a video with the camera app, but I need the music app (or whatever app, like spotify) to keep playing the song in the background, because I want to record the song as well. But the default behavior, when you choose video mode, is to stop the music from playing.
I am asking this because the iPad is the only thing I got with me at the moment, so I need everything done with it (the music playing and the camera recording)
Is that even possible, or the default behavior cannot be bypassed?
Thanks in advance.

Thanks for the help Demo.
I am gonna have to find another way to do this then, because the iMovie solution is not exactly what I need, and I was imagining that the default behavior could not be override.
Thanks again

SQL Server2008 help needed

Having trouble with SQLServer 2008 (not MySQL) and my database connection in Dreamweaver CS6. My document type is set as .asp using VBScript. I can list the table information but cannot use the insert wizard to add new records. I don't get any errors after creating the insert form, but no records get inserted. I'm not a VBScript expert, but do I have to manually write some code to insert records? How do I attach it to a button?

Thanks for the quick reply. I won't be back in the office for a few days, but I'll try to post it when I get back in. It's pretty much the code generated from the Dreamweaver Insert Record wizard. I see where the submit button is created and the value is set but the action on the form is set to MM_insert, so I don't see where the submit code is actually called.
Date: Wed, 3 Oct 2012 12:06:14 -0600
From: [email protected]
To: [email protected]
Subject: SQL Server2008 help needed
    Re: SQL Server2008 help needed
    created by bregent in Dreamweaver General - View the full discussion
This post should be moved to the app dev forum. Please post the code from your form and the insert script pages.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4746757#4746757
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4746757#4746757
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4746757#4746757. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver General by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

HELP -Need to record in 640x480

Similar Messages

Maybe you are looking for