Help. Need to use a temporary Macbook during a repair.

Hello All,
I am having a problem with my Macbook Pro 2011. It needs to be fixed and there will be a 1-2 week turnaround. (Or more.) This is a problem Apple is fixing but I live in Santiago Chile. So, I have no idea how long I will not have my Macbook 2011 back. They will fix it here.
I have an old Macbook 2008 that I have kept updated with the very basic mac software.
So, I want to transfer everything to the 2008 MBP and use it while the 2011 MBP is being fixed.
Both machines are 500GB hard drives running 10.7.5. The 2011 has 8MB Ram the 2008 has 4MB Ram.
My current 2011 Mac has:
Parallels 10
Windows XP VM with Office 2004, Adobe Pro
Windows 7 VM with Office 2011, Quickbooks 2014, Quicken 2014, Adobe Pro
I have backed both machines up with Time Machine. (So I can restore the old 2008 MBP after I use it during the fix.) The 2011 is also backed up another fresh Time Machine and with Carbon Copy.
OK. Some questions.
1.) Do I just do a Time Machine migration from the 2011 Time Machine to the 2008 machine?
2.) I just keep the 2008 machine "as is"? Nothing needs to be done to the drive?
3.) Will I have to reinstall anything in WXP or W7 with Parallels 10?
4.) Will I have to input Microsoft or Adobe licenses into the 2008 VM's?
5.) Then I use my 2011 Time Machine as the Time Machine for the 2008 while the 2011 is getting fixed?
6.) Then reverse the whole process again when I get the 2011 back? (And restore the 2008 Time Machine into the 2008?)
7.) Do I have to do anything to the drives?
In any of the steps do I need to do a Restore and not a Migration?
I know that is a lot of questions! But, I am desperate. I run 2 businesses from the 2011 and even when I go on vacation I have to work 2 hours a day!
I am willing to pay for phone consulting if needed!
Thank you!
David
PS: All of the Windows stuff is multiple backed up too.

Here is how I would handle your situation…
Forget about using Time Machine as the source for migrating data. Time Machine is OK, but when you are moving from Mac to Mac like this Time Machine can make 'new compete copies' of an entire system. All that extra data can easily cause Time Machine to delete older backups if your backup disk is not large enough. Time Machine tells you this after deleting the backup!
Making a clone at each stage gives you clear points to revert back to and so long as you do not delete them they will remain bootable. Label the backups & store them safely.
Get enough hard disks to make full bootable backups of the Macs at each stage.
Create a bootable 10.7 USB installer from the latest 10.7 download in the App store - hopefully you have this in you App store account.
Keep this USB disk setup for booting 10.7 - you will need it when the Mac returns. diskmakerx.com can help make the USB stick or use the Disk Utility method…
http://osxdaily.com/2011/07/08/make-a-bootable-mac-os-x-10-7-lion-installer-from -a-usb-flash-drive/
Before repair
Allow Time Machine to complete a backup before you begin (as a secondary backup)
Backup the 2011 MBP to a bootable clone using (Carbon Copy Ccloner or SuperDuper!)
Clean install 10.7 onto the 2008 MB.
Use Setup Assistant to migrate the data onto the 2008 MB, connect them via Firewire or Thunderbolt - it is fastest to transfer.
Once the 2008 MB is setup boot & try the all the software, some Mac software may use the machine identifier & require re-licencing.
Erase the 2011 MBP with the 10.7 USB installer - you do not want to send the original data for a repair.
Continue using Time Machine on the 2008 MB. To keep the new changes. Also use any other backup systems you have.
After repair…
Backup the 2008 MB to a new clone - keep the 2011 MBP clone in case you need to go back to something.
Clean install the 2011 MBP, so that you know there is no problem with what the repair did
Re-migrate the data from the 2008 MB.
Continue using Time Machine on the 2011 MBP. Also use any other backup systems you have.
Erase the 2008 MB if you are done with it.
I don't know how Windows will handle the licences since they are inside a VM, the VM hard disk should be the same on each Mac, so they may be OK.
One thing to consider is that the 2008 MB has less RAM & is a slower machine - so the VM's may need the settings tweaking - I think these will run slow on this Mac anyway, so try to limit the amount of other tasks when using them.
If the MBP has an SSD & the 2008 MB has a spinning disk you may consider getting a SSD for the MB too - it may feel unbearably slow to go back to a spinning disk from an SSD.
As noted above - Time Machine can delete older backup files with very little warning. Please ensure you have many times the space you need to store each Mac in Time Machine. For this particular task I would want to be backing up Time Machine to a 4 TB drive if possible because you have 3 potential migrations of up to 500GB's of data plus all the changes to the VM's. TM may make full copies at each stage.

Similar Messages

Help needed for using BASIC authentication through JDBCRealm

Help needed.
Hello,
I am doing a degree project, so far it works fine in my local machine, I need to try it on my virtual hosting (as it is a live server).
My project requires JDBCRealm, that is BASIC authentication loading access data from mysql database. Normally this setup can be done in Server.xml file, because my Tomcat hosting is a virtual one, I only have permission to access the web.xml file.
My question is: is it possible to get it done in an alternative way? In web.xml? Some properties file maybe?
Thank you very much.

You can set this up for your context using META-INF/context.xml instead of working with server.xml.
Make a directory called META-INF under your webapp ( it'll be at the same level as WEB-INF ). Under this, add a context.xml with all your context specific configuration including the realm. A sample is below
<?xml version="1.0" encoding="UTF-8"?>
<Context path="/myApp" reloadable="true">
    <Realm
        className="org.apache.catalina.realm.JDBCRealm"
        driverName="com.microsoft.jdbc.sqlserver.SQLServerDriver"
        connectionURL="jdbc:microsoft:sqlserver://127.0.0.1:1433;DatabaseName=myDB;SelectMethod=Cursor;"
        connectionName="username" connectionPassword="password"
        digest="MD5" userTable="users" userNameCol="userid" userCredCol="userpassword"
        userRoleTable="user_roles" roleNameCol="rolename"
    />
</Context>Hope this helps.
People on the forum help others voluntarily, it's not their job.
Help them help you.
Learn how to ask questions first: http://faq.javaranch.com/java/HowToAskQuestionsOnJavaRanch
----------------------------------------------------------------

Help needed in using the DocCheck utility

Hi
Can somebody help me to use the DocCheck utility.I need to check that all the java files have the required javadoc tags and they are correct.
I have downloaded the zip file and I have been giving the following commands
c:\javadoc -doclet com.sun.tools.doclets.doccheck.DocCheck -docletpath c:\svk\jdk1.2.2\bin\doccheck1.2b1\lib\doccheck.jar -sourcepath<full path with the file name>
But I get the following error message : No package or class specified.
I also tried giving the following command:
D:\SegaSource\sega\src\com\sega\account>javadoc -doclet com.sun.tools.doclets.do
ccheck.DocCheck -docletpath d:\jdk1.3\doccheck1.2b1\lib\doccheck.jar User.java
But I get the following message:
Loading source file User.java...
Constructing Javadoc information...
javadoc: warning - Import not found: com.sega.account.address.Address - ignoring
javadoc: warning - Import not found: com.sega.account.icon.Icon - ignoring!
javadoc: warning - Import not found: com.sega.common.DateUtil - ignoring!
javadoc: warning - Import not found: atg.nucleus.GenericService - ignoring!
javadoc: warning - Cannot find class com.sega.account.icon.Icon
javadoc: warning - Cannot find class com.sega.account.address.Address
javadoc: warning - Cannot find class com.sega.account.MasterManager
7 warnings
please help
Thanks
SVK

I have never ran the DocCheck from the command prompt, so I really don't know how to do it, but I do run it succesfully using ant (build tool from apache - jakarta, if you use tomcat you already have it installed).
So.. if you do use ant.. this will help:
<target name="doccheck" depends="prepare">
     <javadoc
          packagenames="${packages}"
                destdir="${doccheck.home}"
          doclet="com.sun.tools.doclets.doccheck.DocCheck"
          docletpath="${doccheck.path}" >
          <classpath refid="project.classpath"/>
          <sourcepath refid="project.classpath"/>
     </javadoc>
</target>If you don't use it.. I guess I was of no help, sorry.
Ylan

ICan't ReInstall my computer please help. need to use Mac for school next week

I use my Mac for School and stuff happened.
Long story short.
1) I tried to reset my Mac Book Pro computer and I did.( by pressing option key and go to disk utility and erase tab and erase)
2) then I know I was supposed to go to Reinstall OS X Lion and I did but I quit. (took 10 hrs and plus my internet is bad and couldn't DL the other stuff)
3) I remembered that I had a recovery disk. so I inserted it and I went to the disk utility, dragged the Macintosh HD to the restore tab, destination, and it copied my recovery disk data? to my Machintosh HD and the name of it changed to Mac OS X Base System ( the name of my recovery disk)
4) and I tried to restart, shut down my computer, it sends me to the same Mac OS Utilities. Again.
5) so I went to Reinstall Mac OS Lion, agreed, and the download destination usually should be the Macintosh HD ( for me its Mac OS X Base System right now) but it said it is locked (because I'm dumb) and i can't install it now.
6) i don't know what to do now because this is not my computer that I'm sending this support from. and I can't use my original Mac Book. what should I do?
AND I NEED TO USE THE MAC NEXT WEEK FOR SCHOOL.
more info: MacBook Pro 13 inch Late 2011 ( got it for christmas)
OS 10.7.5 ( recovery disk is 10.7.2)
had no problems for 2 years.
Why is Internet bad? Japan. thats why.
For those who wonder why I wanted to reset/restore my MacBook Pro or, want to hear the long story:
I play League of Legends, Steam, Osu! on my Mac and it took alot of capacity (or space).
And League of Legends has thisthing called "Item sets" that when you save it, it doesnt save it in the client (or app), it saves the "item sets" data in your computer (took alot of capacity/space)
Not just that, and I had iPhoto but when i downloaded iLife to my mac, and after that, it said my iPhoto is damaged and it can't open.
And summer ended, my parents said If I fail my 11th grade, they are going to kick me out so I told them I'm going to reset my Mac to factory settings and get a fresh start, well this happened.

hi there! I got it back to work by buying the USB version of Mac OS X Lion 10.7
and since my internet connections are kinda bad, I'm not able to download and update it to 10.7.5.
but anyways I got it back to work.
All I can say is I suggest you to buy the USB version of Mac OS X Lion 10.7 from amazon or apple store.

Href and target tags tutorial/help needed for use with an existing website

I have a website, (built through iweb), and an intro movie. I have spent a lot of time trying to understand the proper tags and how to use them without much luck. My goal is to have the homepage associated with my domain name load in a browser while at the same time have my intro movie open in a Quicktime Player window, play, and automatically close leaving the webpage visible. If anyone can point me to a tutorial or walk my through the process I would appreciate it.

Poster movie style. Requires QuickTime Pro:
Create an image (or a frame from your movie). This becomes the "poster". You could add text to it (Click to Play) in a graphic editor app to help your viewers or add text to the page under the image with these instructions.
Save this new file as poster.mov
It becomes the src="poster.mov" (source tag in the html code). Set its dimensions to fit your page layout.
Your "intro movie" will be your href="intro.mov" (href tag in the html code).
Open it with QuickTime Pro and then open the Movie Properties window. Click on the Presentation tab to see the choices. Automatically close option will close the QuickTime window. Automatically quit option will quit the running QuickTime Player app. This would be a better option as the browser should come back as the "front" application. You also want to check "auto play".
Use Save As (preserves fast start feature) and name this file intro.mov
In your html code for the QuickTime files you need to set target="quicktimeplayer" (this launches the QuickTime Player app instead of using the browser plug-in). It may also help if you use the full URL to both files in each tag (http://myserver.com/foldername/intro.mov).
One of mine as an example. It uses automatically close window:
http://homepage.mac.com/kkirkster/mycareerfuture/
View the source code to see the tag structure. My page uses javascript instead of the older object/embed tag code.
More useful links:
http://developer.apple.com/internet/ieembedprep.html
http://www.qtbridge.com/pageot/pageot.html

Help needed on using hardware tokens / Smart Cards for encryption

I need help in filling the following gap in my understanding
I know about
1. Using keys in Java keystores to encrypt/decrypt data (Signing, symmetric encryption)
2. Using Keytool to export a digital certificate to a keystore.
I need help in knowing
1. How the certificate stored in secret device is shared with java key stores. Do I need to use some special library.
2. Is the process of encrypting Secret Key bytes defferent from wrapping the key?
Specifically, I want to use iKey (USB based security hardware token) in my system, which says that it supports
�� The PKCS#11 standard library
�� The MSCAPI and CSP standard libraries
�� Using automatic certificate registration

> We have a current Server with 4 x 4 cores, 64 GB RAM, 6TB HDD, Windows 2K8 R2 and SQL Server 2K8 R2. On this server we have installed 6 SAP Servers(both ABAP and JAVA based). We want to install two more SAP servers on this machine but planning to use the Hyper-V Mode to ensure that there is no conflict. With this background here are my queries.
You should not run SAP instances on the server with the hypervisor (the OS running on the metal). If you want to virtualize, then do it for all instances.
Read
Note 1246467 - Hyper-V Configuration Guideline
Note 1570141 - Key Figures of Virtualization on Hyper-V
> u2022 Is it possible to take a Image of existing installation (6 SAP Servers and SQL Server) that we have done?
If they are running on the same OS you will always take images of everything.
> I think this was possible in VMWare.
So those 6 servers are virtualized already??
> The issue I foresee is that in this image the servers are using Machine Name as host. In the Hyper V mode the host name will change. So how will this work?
The safest way is to do a homogeneous system copy.
> u2022 Can I run the normal windows mode along with Hyper V. Basically we want to keep our 6 SAP servers running and for the two new servers create two hyper V instances and allocate 2 cores and 4GB RAM each. Is this possible? Or as per Microsoft on the root we should not run any server?
According to
Note 1246467 - Hyper-V Configuration Guideline
this should not be done.
Markus

What do I need to use iphone and macbook air in europe

What do I need to use iphone 4 and macbook air in europe?

Hello Bev23,
Thank you for posting in the Apple Support Communities. To charge your devices, you will need adapters for the country you are in. We sell a Apple World Travel Adapter Kit that will work with several different countries and will work with both your MacBook Air and iPhone:
Apple World Travel Adapter Kit
http://store.apple.com/us/product/MB974ZM/B/apple-world-travel-adapter-kit
You can also find information about wireless carrier support for using your iPhone in the article below. You may need to contact your wireless carrier for more information about using your iPhone abroad:
iPhone: Wireless carrier support and features
http://support.apple.com/kb/HT1937
Have a safe trip!
Best,
Sheila M.

Help needed in using oracle rules SDK

Hi,
For testing my rulesets using oracle rules SDK I doing the following:
1. Creation of dictionary, ruleSet.
2. Declared two kinds of globalVariable variables in my datamodel :
Final and non-Final.(Type of these varaibles are String and Double only)
3. Final globalVaraibles are used in creating rule's patterns.
4. Non-Final globalVariables are used in creating rule's action.
5. Functions are created for asserting globalVariables values and
returning non-final varaibles, since those are required as action
results.
6. In java code I am testing my ruleset (dict.testRuleSet()). Before
testing i am populating my final global variables (since these are used
in rule's patterns),
and updating datamodel.
The above procedure is working fine and I rules are successfully working.
Now, first of all i want to know if the above mentioned approach is correct or it needs to be reframed??
secondly, when i update datamodel with values (in java code itself) it
takes 4-5 seconds in updating it. This is the main issue that why it is
taking this much time??
any comment would be of great help.
Thanks in advance.

I will send up an alert for you, Colin. Even though I use iTunes for Mac, troubleshooting it isn't my forté.

Help needed in using the appropriate Trigger

I have a master detail form.DEPT block is the master block and Employee is Detail block.I need to display the message when user is
trying to enter the ENAME field in the Employee block(detail) when the DEPTNO in the DEPT block(master) is not equal to 10.
Messgae should be displayed when user trying to type the value but not when the user navigates into the ENAME text field.
What is the appropriate trigger that is useful here?
Thanks.
GSR

If the DEPT block is table based in the block's POST-QUERY trigger you can simply set
if :DEPT.DEPTNO !=10 then
    set_item_proerty('DEPT.ENAME', insert_allowed, property_false);
    set_item_proerty('DEPT.ENAME', update_allowed, property_false);
else
    set_item_proerty('DEPT.ENAME', insert_allowed, property_true);
    set_item_proerty('DEPT.ENAME', update_allowed, property_true);
end if;if the block is a non-database one then you can put that code in EMPNAME's WHEN-VALIDATE-ITEM trigger
Luca
Don't forget to mark the answer as helpful/correct if it is. please.

Addon not starting - help needed in using ExtensionPackage tool

Hi,
I have deployed my addon using Lightweight Deployment in 9.1 PL00.
When starting my addon, I get the error: SapProject1 has stopped working.
What may be the issue?
I packaged my addon using ExtensionPackage tool. In the SBO compatibility tab, we need to give the version like 910.000.00. How should I check I my exact version number? In SAP application->Help->About SAP Business One, it shows version as 9.10.105, but in ExtensionPackage tool, I am supposed to write as nnn.nnn.nn. So how should I mention there?
Secondly, in the Register 32-Bit Microsoft COM DLLs tab, should I select the DLLs: Interop.SAPbobsCOM.dll and Interop.SAPbouiCOM.dll ?
Please guide me. I am trying to do it for first time.
Thanks.

I have never ran the DocCheck from the command prompt, so I really don't know how to do it, but I do run it succesfully using ant (build tool from apache - jakarta, if you use tomcat you already have it installed).
So.. if you do use ant.. this will help:
<target name="doccheck" depends="prepare">
     <javadoc
          packagenames="${packages}"
                destdir="${doccheck.home}"
          doclet="com.sun.tools.doclets.doccheck.DocCheck"
          docletpath="${doccheck.path}" >
          <classpath refid="project.classpath"/>
          <sourcepath refid="project.classpath"/>
     </javadoc>
</target>If you don't use it.. I guess I was of no help, sorry.
Ylan

Desperate Help needed in using LabVIEW

Hi,
I'm a beginner in using LabView programming. Can anybody help with implementing Labview 6 and Keithley 2400 SourceMeter for data aquisition? I've wired up the hardware and have problem coming up with the software.. Any idea how to get started?

Hello giam,
I made wrapper vi's for the standard GPIB Read/Write functions to
handle errors (using green icons to distinguish them better). The "send
mult" handles simple strings (like standard GPIB Write) and array of
strings (you often need to send more than one string to a device). But
generally those icons have the same main functionality like standard
GPIB...
To send an array of strings you put the GPIB Write into a for loop and
connect the array as input with autoindexing enabled (as standard).
Maybe a small delay will help for some devices, the K2400 should do
without.
Edited: The greenish delay icon is just a standard "Wait ms" with
additional error cluster in/out to allow dataflow programming...
Message Edited by GerdW on 12-20-2005 09:25 AM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Attachments:
GPIB_SendMult.png ‏10 KB

Help needed in using exceptions

can anyone please correct the code for me.
i am posting the code after doing all my homework , i tried the best of me
not able to solve the error. thanks in advance
i would prefer a clue how to solve the error even after the clue if im not able to solve i would expect the answer and explanation.
thanks in advance
import java.util.*;
public class TestExceptions
     public static void main(String[] args)
          String test = "no";
          try
               System.out.println("Start try");
               doRisky(test);
               System.out.println("end try");
          catch ( ScaryException se )
               System.out.println("Scary Exception");
          finally
               System.out.println("end of main");
     static void doRisky(String test) throws ScaryException
          System.out.println("start risky");
          if("yes".equals(test))
               throw new ScaryException();
          System.out.println("end risky");
          return;
the error i use to get is as follows
abrar-sheiks-macbook-pro:java abrarsheik$ javac TestExceptions.java
TestExceptions.java:25: cannot resolve symbol
symbol : class ScaryException
location: class TestExceptions
     static void doRisky(String test) throws ScaryException
^
TestExceptions.java:15: cannot resolve symbol
symbol : class ScaryException
location: class TestExceptions
          catch ( ScaryException se )
^
TestExceptions.java:31: cannot resolve symbol
symbol : class ScaryException
location: class TestExceptions
               throw new ScaryException();
the erroe i use to get is

An Exception is basically a class just like any other, except that it extends java.lang.Exception.
So you either use existing ones, such as IllegalArgumentException, IllegalStateException, NullPointerException and so on, or you define your own. It seems that you wanted to define your own exception here, called ScaryException.
Defining your own exception isn't to different from writing any other class. Just write this:
public class ScaryException extends Exception {
}For the most basic part that's all you need. Later on, you might want to add some more constructors, where you can pass a message and/or a cause (which will just be passed to the super constructor). And that's usually it, most exceptions don't contain any more code than that.

Help needed to use USB 9481 relay device

I am new to LabVIEW so any help would be appreciated.
I am attempting to start and stop an instrument with the USB-9481 relay device. On my instrument, connecting pins 1 and 2 will start the machine, and connecting pins 4 and 5 will stop the machine. How do I program LabVIEW to connect pins 1 and 2, wait a determined time, disconnect the connection, and then connect pins 4 and 5? No power needs to be supplied since the 12V is already being supplied by pins 2 and 4.
Thanks so much.

Hi Josh, No problem. I took a look in the NI 9481 Operating Instructions and found this information to be quite useful:
As far as the DAQ Assistant goes, you can only have 1 DAQ Assistant per device, so you will need to add channels to the DAQ Assistant by pressing the '+' button near the top left (just below the Play button). This device is pretty simple, and I'm sure you'll be using it in no time.
Message Edited by Otis [DE] on 05-03-2006 03:20 PM
Otis
Training and Certification
Product Support Engineer
National Instruments
Attachments:
9481-Instructions.JPG ‏83 KB

Help needed to use only SQR reporting with Oracle 10g

I have very old SQR reports (ver 2.28) that are still being used by connecting SQR to an Oracle7 DB. We have migrated the data from Ora7 to Oracle 10.2.0.4. The issue is that SQR 2.28 is not able to connect to Oracle 10.2.0.4. Hence I want to use the new version of SQR that is part of OBIEE.
I am not familiar with OBIEE and my interest is only using the SQR portion of it.
1. Can any one help me as to how to go about installing SQR portion of OBIEE on a Linux Itanium 64-bit box? My Oracle 10.2.0.4 DB is also running on the same box.
2. What are the minimum components of OBIEE I need to install to make use of SQR ?
3. Any other relevant information
Thanks.

When installing webgate, make sure the Access Server is running. You will get this error if Access Server is down or not reachable. ( Make sure from the machine where you are installing webgate you can ping to Access Server by Name).
Thanks
Ram

Help needed to troubleshoot why my MacBook Pro repeatedly drops wifi connection

We run Mac & PC laptops, iPhone, iPad on occasion, with ATT DSL, 2Wire 2701HG-B Router. First 6 months of enjoying my Mac, no trouble. Then things started to go south. Been dealing with this problem of dropped internet connection for over a year. Got a new router--the 2Wire 2701, finally got a new phone line put in from the outside to inside. It now seems like the MacBook Pro drops the signal far more than the PC. It seems worse when I'm at my desk, which is only a room away from the router. It can drop the signal about every 3rd or 4th click on the internet. The Networks Diagnostics will show red buttons on the Server and Internet. Been testing other areas of the house, and find it seems better in these other areas, dropping far less. Hard to tell, because the problem comes and goes, like the sun. iPhone has dropped connection on occasion. iPad has occasional slow download of YouTube. Neither of those are troubling.
I tried checking with the Airport Utility, but it tells me it can't find any Airport. I obviously understand very, very little of this. Any help would be appreciated.

Which os are you using?
Change your router channel. Sometimes this is all you will have to do.
Power cycling the router. Read the router's user manual or contact their tech support for instructions.
System Preferences/Internet & Network/Network
Unlock the padlock
Locations: Automatic
Highlight Airport
Click the Assist Me button
In the popup window click the Diagnostic button.
System Preferences/Network- Unlock padlock. Highlight Airport. Network Name-select your name. Click on the Advanced button. Airport/Preferred Networks-delete all that is not your network.
Place a check mark next to "Remember networks this computer has joined." Click the OK button and lock the padlock. Restart your computer.
http://support.apple.com/kb/TS1920 Mac OS: How to release and renew a DHCP lease
No internet connection (wireless)
Check to see if an extra entry is present in the DNS Tab for your wireless connection (System Preferences/Network/Airport/Advanced/DNS).
Delete all extra entries that you find.
Place a check mark next to "Remember networks this computer has joined."
Other resources to check into:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
Netspot
How to diagnose and resolve Wi-Fi slow-downs
Pv6 troubleshooting
Mac OS X 10.6 Help: Solving problems with connecting to the Internet
What Affects Wireless Internet?
Solutions for connecting to the Internet, setting up a small network, and troubleshooting

Help. Need to use a temporary Macbook during a repair.

Similar Messages

Maybe you are looking for