Help neede to get Cost Itemization for a material
Dear All,
I am developing one report for Cost Component Details. First of all I Fetch Cost Estimate No for the Material from KEKO table then I search KEPH table for its Cost Components here i get 2 entries for a material one is for UPPER LEVEL and One for LOWER LEVEL. And after that i use "BAPI_COSTESTIMATE_ITEMIZATION" to get itemization but my problem is that i am not able to find data for LOWER LEVEL Components. I want both UPPER & LOWER LEVEL itemization for the particular material so i can match overall cost.
So, can anybody help me in this matter.
Thanks in Advance,
With Regards,
Mudassar Praniya.
Solved.
Similar Messages
-
My iphone serial number claims to have been replaced. But it is actually not. I need to get it replaced for a screen issue ASAP! Please help
This was told to me by Apple Store reps... They have asked to contact Apple support help line .. nobody answers there.. I am stuck! There is no email id that i can find either to contact Apple support
-
I need to get raw plugin for Canon 5D Mark iii for CS6 the adobe website has changed and I can not find the download.. it keeps looping me back to the product download page without the raw
Which operating system are you using?
Have you tried Help>Updates from within photoshop cs6 to get either camera raw 8.3 or 8.7.1, which should enable photoshop cs6 to open the canon 5D Mark III files.
(version of camera raw depends on your operating system)
If that doesn't work try one of the following camera raw plugin installers:
Camera raw 8.7.1 plugin
https://helpx.adobe.com/x-productkb/multi/camera-raw-plug-in-installer.html
If you have windows xp or vista or mac os x snow leopard (10.6.8), then you'll have to use the camera raw 8.3 plugin installer:
https://helpx.adobe.com/x-productkb/multi/camera-raw-84-support-policy.html -
Redemption code needed to get serial number for Lightroom is not activated. What to do?
redemption code needed to get serial number for Lightroom is not activated. What to do?
Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
-
Hard drive died. Cannot uninstall CS3 to remove copy registration. Need to reinstall on new laptop with windows 7 64 bit system, Need to get activation code for CS3 Web Premium.
Thank you Bob.
Just to clarify - in terms of backing up one set of these, would that just be so I had it on disk and didn't need to re-download from Adobe if the installation got corrupted somehow? Or do I need a backup for some other reason?
Thanks -
I'm thinking of buying an iPad. Can I use my home's wifi or do I need to get a plan for it?
Another thing to note is that if your cell plan/carrier supports it (it's free with Verizon Shared plans), you can also use your mobile phone as a mobile hotspot (Personal Hotspot on iOS devices) and use your phone's data to access the internet on the iPad. I purchased an iPad 3 with Verizon 3G/4G cellular built-in but have never activated it. I instead use Personal Hotspot with my Verizon Wireless cellular (phone) plan. If you go this route, you can save money over purchasing a Wi-Fi/Cellular iPad and just choose the Wi-Fi model. But also realize that if you choose to at some point to use the iPad when you're away from Wi-Fi, you won't have the built-in cellular capability that a Wi-Fi/Cellular iPad would have.
-
Cost object for raw material consumption posting
the raw material cosumption posting is done in the background when the goods issue is done. so where do we assign cost object for the primary cost element of raw material consumption account. since we create primary cost element for raw material consumption account, it will expect us to give cost object, so where we assign cost object for the raw material consumption cost element
hi
since the raw material cost is relevent for cost accounting u need to maintain primary cost elment accounts.When ever u confirm goods, the rm issue will take place automatically and will be debited to either product cost collector or production order. so u need not to assign any cost object for these consumption accounts why bcoz issues will take palce aganist a production order or product cost collector which is a cost object .
regards
siva -
Cost variance for the material master
Hi all,
This is very urgent requirement.
How to maintain cost variance for the material master?
I will assign the points
venuHi,
Material Variance key will be assigned in Material master Costing data tab
Best Regards
Ashish Jain
Message was edited by:
Ashish Bohara -
What are the possible cost objects for raw material consumption postings
what are the possible cost objects for raw material consumption postings. i want to know whether it can be work order(maintenance order).
For example, you are confirming a process order and issuing raw materials to the process order, the system in the background creates the consumption posting and will by default use the process order as a cost object.
Similarly, when you are issuing materials to a work order, you will use MB1A and with movement type 261 and the system prompts you to enter the order number. If you are using movement type 201, then the system prompts you to enter the cost center and so on.
Thanks,
Madhav Nanduri -
Help needed in getting the previous Quarter Data
Hello folks,
I have this procedure where i have to modify the current procedure in the following manner:
I need to get rid of the variables p_start and p_end so that i cannot see them in the crystal report and include the Frequency in the procedure to get the Data based on the Dates.
and Main requirement is" If the Frequency is Quarterly " it should get the previous quarter Data, if "Frequency is monthly" it should return the previous month data.Can anyone please let me know where shud i make changes. Am including the procedure for refernce. Any help is appreciated
Thanks a millioin,
CREATE OR REPLACE PROCEDURE hcsc_recovery_report_h(report_record in out cr_return_types.gen_cursor,
p_start string,
p_end string)
IS
v_startdate date;
v_enddate date;
BEGIN
v_startdate := to_date(p_start, 'YYYY/MM');
v_enddate := last_day(to_date(p_end, 'YYYY/MM'));
open report_record for
select --distinct r.recovery_id
r.event_id,
r.event_case_id,
c.client_id,
c.client_code,
c.client_name,
b.branch_group_code,
b.branch_group_description,
g.employer_group_code,
g.employer_group_name,
e.client_policy_identifier,
e.date_of_incident,
e.event_type_code,
sum(nvl(r.amount, 0)) as amt_received,
nvl(sum(case
when r.amount >= 0 then
rd.fees
else
rd.fees * (-1)
end),
0) as fees,
ec.close_date, *001* commented
(case
when ec.close_date <= to_date(to_char(v_enddate, 'MMDDRRRR') || '235959',
'MMDDRRRR HH24MISS') then
ec.close_date
else
null
end) as close_date, --*001* added
get_case_value(ec.event_id, ec.event_case_id, v_enddate) as case_value,
nvl(etl.fee_percent_flag, 'N') workmans_comp,
max(to_char(r.recovery_date, 'FMMonthYYYY')) Year_Month,
max(to_char(r.recovery_date, 'YYYYMM')) Y_M,
max(to_date(to_char(r.recovery_date, 'MMYYYY'), 'MM/YYYY')) date_MY
from recovery r,
recovery_detail rd,
event e,
client c,
branch_group b,
employer_group g,
event_case ec,
event_type_lookup etl
where r.event_id = e.event_id
and r.event_case_id = ec.event_case_id
and ec.event_id = e.event_id
and rd.recovery_id(+) = r.recovery_id
and r.recovery_date between v_startdate and
to_date(to_char(v_enddate, 'MMDDRRRR') || '235959',
'MMDDRRRR HH24MISS')
and e.client_id = c.client_id
and g.client_id = c.client_id
and b.client_id = c.client_id
and g.employer_group_id(+) = e.employer_group_id
and b.branch_group_id(+) = g.branch_group_id
and e.event_type_code = etl.event_type_code -- SST 130852 04/14/09
group by r.event_id,
r.event_case_id,
c.client_id,
c.client_code,
c.client_name,
b.branch_group_code,
b.branch_group_description,
g.employer_group_code,
g.employer_group_name,
e.client_policy_identifier,
e.date_of_incident,
e.event_type_code,
ec.close_date,
get_case_value(ec.event_id, ec.event_case_id, v_enddate),
nvl(etl.fee_percent_flag, 'N')
having sum(nvl(r.amount, 0)) <> 0
order by c.client_code,
b.branch_group_code,
g.employer_group_code,
r.event_case_id;
Edited by: user11961230 on Oct 20, 2009 9:02 AMuser11961230 wrote:
1. I want to get rid of the p_start and p_end. So how do i declare the v_startdate and v_enddate in the following part?
v_startdate := to_date(p_start, 'YYYY/MM');
v_enddate := last_day(to_date(p_end, 'YYYY/MM'));I'm not sure what you mean by "declare".
In PL/SQL, "declare" means state (at the beginning of a block) that there will be a certain variable with a certain name (such as v_startdate) and datatype (such as DATE). You're already declaring the variables v_startdate and v_enddate correctly, right before the BEGIN statement.
Declaring a variable is not the same as initializing it, that is, giving it a value for the first time. Your next question seems to be about initializing..
2. where exactly shud i include the logic that u have mentioned. sorry a dumb questionIn place of the two assignment statments that reference p_start and p_end.
3. This time am gonna use frequency instead of report_type so that i will get rid of the p_start and p_end from the procedure.Do you mean you want to pass an argument (called frequency) that tells if you want a quarterly or a mionthly report, just like the variable report_type in my example?
If so, replace report_type in my example with frequency.
I think you want something like this:
CREATE OR REPLACE PROCEDURE hcsc_recovery_report_h
( report_record in out cr_return_types.gen_cursor
, frequency IN VARCHAR2
IS
-- Declare local variables:
v_startdate date;
v_enddate date;
BEGIN
-- Initialize v_startdate and v_enddate, depending on frequency
IF frequency = 'QUARTERLY'
THEN
v_startdate := TRUNC ( ADD_MONTHS (SYSDATE, -3)
, 'Q'
v_enddate := TRUNC (SYSDATE, 'Q');
ELSIF frequency = 'MONTHLY'
THEN
v_startdate := TRUNC ( ADD_MONTHS (SYSDATE, -1)
, 'MM'
v_enddate := TRUNC (SYSDATE, 'MM');
END IF;
-- Subtract one second from v_enddate
v_enddate := v_enddate - ( 1
/ (24 * 60 * 60)
open report_record for
select --distinct r.recovery_id
r.event_id,
and r.recovery_date BETWEEN v_startdate
AND v_enddate
...When you post formatted text on this site (and code should always be formatted), type these 6 characters:
(small letters only, inside curly brackets) before and after sections of formatted text, to preserve spacing.
Edited by: Frank Kulash on Oct 20, 2009 2:37 PM
Changed query to use BETWEEN -
Help needed regarding getting jnlp
Hi all,
we need help regading java web start. We are downloadng some set of jar files to the client side using JNLP. With these jar files jnlp launches a swing base application in the client side and interacts with server application depoyed in WebSphere. In order to launch this application IBM Jre is needed in the client side. But IBM Jre can not install in non IBM meachines. So, we planing to make jar file of Jre and download it along with the rest of the jar files. After that we want to install in some directory in the client meachine and use that JRE to launch application. Now we are couple of problems with this approach.
1) To extract the Jre from the jar file we need the path, where these jars are downloaded.Even though we know the path "C:\Documents and Settings\Administrator\Application Data\IBM\Java\Deployment\cache" we can't hard code this, because user may change this location. The extraction program of this jar file in the client side is in one of the jar file that is downloaded. But here in the it is not able to recongnize relative path. So what we need is, is there any api to get this location of this path.
2)Second, In order to launch the application with downloaded Jre we need to set the classpath for jars that are downlaoded with Jnlp. But after downloading these jar files to the client side they are renamed(prefixed with RM and RT). Now, how to set the classpath to these jar files.
Here instead of JNLP if we use applet our problem will be solved. But we can't use applet because of client requirements.
Anybody, please try to suggest me some thing with this problem.
thanks,You might want to try posting your question to the Grid Control Forum.
Enterprise Manager -
Help needed in getting file url
Hi,
I work in a project where i need to get the url of the specified file. The code for that is as,
URL fileURL = Thread.currentThread().getContextClassLoader().getResource();
The required resource is available in the concerned path. But the file url returns null
Can you please help in solving the problem.
Thanks and Regards,
MclarenWhere (text area, label, button) do you want it to do it.
What do you want it do (browse within the local text area, open the default browser...)
Text area, use above, JButton (or alike) and open default browser, use ActionListener and JDIC. -
How to get Cost element for a component in co03 cost analysis report
Hi,
I'm using table COSP to find the quantity for a production order component. However, I need to identify the cost element first to get the unique data. In CO03 cost analysis report, there is cost element for the component. Does anyone know how to get it ?
Thanks.CSKA stores the basic info about the cost element
There is no data in CSKB.
I'm trying to use different tables to get the cost element.
AUFK, AFKO, AFPO, RESB, ...but no luck... -
Help needed with a PS script for network share documentation
I found a nice PS script that will do what I want, however the output portion seems to be broken. It will output the permissions and details, but not list what share it is referring to... Can anyone help with this?
Thanks!
https://gallery.technet.microsoft.com/scriptcenter/List-Share-Permissions-83f8c419#content
<#
.SYNOPSIS
This script will list all shares on a computer, and list all the share permissions for each share.
.DESCRIPTION
The script will take a list all shares on a local or remote computer.
.PARAMETER Computer
Specifies the computer or array of computers to process
.INPUTS
Get-SharePermissions accepts pipeline of computer name(s)
.OUTPUTS
Produces an array object for each share found.
.EXAMPLE
C:\PS> .\Get-SharePermissions # Operates against local computer.
.EXAMPLE
C:\PS> 'computerName' | .\Get-SharePermissions
.EXAMPLE
C:\PS> Get-Content 'computerlist.txt' | .\Get-SharePermissions | Out-File 'SharePermissions.txt'
.EXAMPLE
Get-Help .\Get-SharePermissions -Full
#>
# Written by BigTeddy November 15, 2011
# Last updated 9 September 2012
# Ver. 2.0
# Thanks to Michal Gajda for input with the ACE handling.
[cmdletbinding()]
param([Parameter(ValueFromPipeline=$True,
ValueFromPipelineByPropertyName=$True)]$Computer = '.')
$shares = gwmi -Class win32_share -ComputerName $computer | select -ExpandProperty Name
foreach ($share in $shares) {
$acl = $null
Write-Host $share -ForegroundColor Green
Write-Host $('-' * $share.Length) -ForegroundColor Green
$objShareSec = Get-WMIObject -Class Win32_LogicalShareSecuritySetting -Filter "name='$Share'" -ComputerName $computer
try {
$SD = $objShareSec.GetSecurityDescriptor().Descriptor
foreach($ace in $SD.DACL){
$UserName = $ace.Trustee.Name
If ($ace.Trustee.Domain -ne $Null) {$UserName = "$($ace.Trustee.Domain)\$UserName"}
If ($ace.Trustee.Name -eq $Null) {$UserName = $ace.Trustee.SIDString }
[Array]$ACL += New-Object Security.AccessControl.FileSystemAccessRule($UserName, $ace.AccessMask, $ace.AceType)
} #end foreach ACE
} # end try
catch
{ Write-Host "Unable to obtain permissions for $share" }
$ACL
Write-Host $('=' * 50)
} # end foreach $share
This is what the output looks like when ran with 'RemoteServer' | .\Get-SharePermissions.ps1 | Out-File 'sharepermissions.xls'
FileSystemRights : Modify, Synchronize
AccessControlType : Allow
IdentityReference : Everyone
IsInherited : False
InheritanceFlags : None
PropagationFlags : NoneActually it is not being written only with Write-Host. The last line of the loop is this "$ACL" which ius an array of objects.
Here is a version that gets the info more easily and produces flexible objects. It should be easier to modify into what is needed.
# Get-ShareSec.ps1
[cmdletbinding()]
param(
[Alias('ComputerName')]
[Parameter(
ValueFromPipelineByPropertyName=$True
)]$Name=$env:COMPUTERNAME
Process {
Write-Verbose "Computer=$name"
$shares =Get-WMiObject Win32_Share -ComputerName $name -Filter 'Type=0' -ea 0
foreach($share in $shares){
$sharename=$share.Name
Write-Verbose "`tShareName=$sharename"
$ShareSec = Get-WMIObject -Class Win32_LogicalShareSecuritySetting -Filter "name='$ShareName'" -ComputerName $name
try {
foreach ($ace in $ShareSec.GetSecurityDescriptor().Descriptor.DACL) {
$props=[ordered]@{
ComputerName=$name
ShareName=$sharename
TrusteeName=$ace.Trustee.Name
TrusteeDomain=$ace.Trustee.Domain
TrusteeSID=$ace.Trustee.SIDString
New-Object PsObject -Property $props
catch {
Write-Warning ('{0} | {1} | {2}' -f $Computer,$sharename, $_)
Get-Adcomputer -Filter * | .\Get-ShareSec.ps1 -v
¯\_(ツ)_/¯ -
The sbs2011 Server is not longer receiving external emails. I have a expired certificate and need to get it renewed correctly.....but I'm unsure of all the choices it asks for.
Need some help here.Open Exchange power Shell and type
Get-ReceiveConnector | FL
Share the details.
Also, Basic troubleshooting first :
So if you do telnet from external machine to port 25 on server do you get a banner?
telnet remote.domain.com 25
It should return something similar :
220 servername.domain.local Microsoft ESMTP MAIL Service ready
You can do a telnet on the server itself and one from the outside and compare, if they are not the same or the router / firewall is routing to the wrong server or it is corrupting the response.
Assuming its Self Assigned Certificate - To reissue Self Assigned Certificate follow :
http://blog.the-it-blog.co.uk/2013/01/25/re-issuing-a-self-signed-certificate-for-exchange-sbs/
Binu Kumar - MCP, MCITP, MCTS , MBA - IT , Director Aarbin Technology Pvt Ltd - Please remember to mark the replies as answers if they help and unmark them if they provide no help.
Maybe you are looking for
-
Terms of payment in vendor master
Can we have different terms of payment in vendor master? if yes what is the use of it?
-
Fonts are not the same color from page to page?
I had a page with white colored font and the subsequent page had a grey version of the same font. So I created a new page off of the page that had the correct white colored font and I copied the text from the other page to the newly created page and
-
Obtain reference to the IPortalComponentRequest in TagLib
Hi, I created a custom Taglib in a Portal Component according to the tutorial http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40599e45-8cf9-2910-cbaa-d4cd8e15ff34?QuickLink=index&overridelayout=true. Now I need to obtain a referenc
-
We were using SP3 for iplanet server. Now we want to use SP4.
We were using SP3 for iplanet server. Now we want to use SP4. When we deploy the EAR on SP4(thru IASDEPLOY), its giving Null pointer error but at the end it says deployment complete. Also there are no proper entries in the registry. If we deploy the
-
My iphone 4 never had a problem with the personel hotspot until 2-3 days ago . Now when I turn the hotspot on none of my other i-devices can see it. I have tried the turn on/off thing and I have tried the complete turn off holding the 2 buttons on bo