Help Needed - Accidentally Reset Lumia 610 - Lost ...

Hi. I need help rescuing some family videos from my maid's Lumia 610. I've accidentally reset the phone, so all the data seems to have disappreared.
Can someone help me, with get the videos back, or maybe, I could send it to Nokia to help retrieve the videos ?
Thanks alot.

Hi Fluorescence,
Thank you for your post and welcome to the forums.
When resetting a Lumia phone this will erase all data and set the phone in the factory state so all data will be erased. The only way you can get your data back is if you synced and backed up using the Zune software. Please refer to the link below on this. If you haven't synced your device with Zune then I'm afraid your data is lost.
http://www.zune.net/en-US/support/sync/syncing/syncwindowsphone.htm
Regards
Raoul_Duke
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Similar Messages

Help Needed for Resetting VoIP SPA 2100 Codes

Yesterday afternoon, I lost power to my home for a few minutes; until then my phone worked perfectly (for the week that I had it initially installed). I have the Earthlink TrueVoice program with a ZyXEL P 600 series DSL modem and direct Ethernet cable (NO router) to my ATA adapter (Linksys VoIP model SPA 2100). My computer is an HP Pavilion 8755C with Windows Millenium Edition. I have a standard (wire) phone connection. After the power was restored to my home, I tried to use my ATA adapter (Linksys VoIP model SPA 2100) to make a phone call, but there was a five-second delay between when I spoke and when someone on the other end of the line heard me. I contacted Earthlink through online chat and was told to do the following: Dial **** 877778 # 1 to reset the adapter. I did this and nothing positive happened (though I did hear a recorded English woman’s voice repeat the numbers I dialed); I did, however, lose the dial tone and was unable to connect to the Internet with my DSL. So, to conduct more online chat, I re-routed the Ethernet cable to bypass the ATA adapter; I was successful at restoring my Internet, but, obviously, I had NO phone service. More than 8 hours of online chats to Earthlink technical service resulted in failure each time. I swapped ends of my cables numerous times – no success. I removed the power cords to the ATA adapter and to the DSL Modem MULTPILE times for for up to 5 minutes – no success. The lights on the back of the ATA lit properly, but since the first time I tried the **** 877778 # 1 code, the Status light blinks and the light indicating “Phone 1” stays dark (yes, there is astandard phoneline connected to that port). I tried multiple codes to reset the ATA (re-coding instructions are separated by semi-colons): **** 877778 # 1 ; **** 877778 # 1 # ; **** 732668 # ; *** *73738 # 1 . I unplugged the power cord and Ethernet cable (to the modem) on the ATA adapter for about 1 or 2 minutes after trying to reset the code before reattaching everything (power cord always re-attached last). I tried each of these suggestions MULTIPLE times without success. One Earthlink tech wanted more specific information – the MAC address (which I was told is a 12 digit hexa decimal number that starts with zero). I told him what it was. He asked me to try a “ping” test; I was told to click on Start -> Run, type in cmd and hit Enter. A new window would appear and I should type in ping 192.168.0.1 and hit Enter. I never got to the “new window” because after I typed in “cmd” and hit Enter, I received the message “Windows cannot find cmd.” I was told to dial the code * * * * 110 # and to hear my IP address; I heard nothing. I noticed that the last time I tried to dial **** 877778 # 1, I was interrupted before I typed the final “1” because the recorded voice told me “invalid value.” Around 1 a.m. last night I gave up in disgust and went to sleep, disconnecting everything. I have now reconnected the DSL modem and made the direct connection to my computer (the ATA adapter is still disconnected from power and all connecting cables). I am not an idiot and I have some electronics experience (I have wired several home theater systems), but I have little computer experience (and none with VoIP) and right now I am totally frustrated. The tech support at Earthlink is virtually worthless. Please help (and please keep it in simple terms so that an ignorant individual like myself might learn – I need a nice step-by-step method (including times to wait between restarts, what cables/cords to disconnect and the order to disconnect/reconnect them (if that matters) to reset this device) Thanks from a neophyte who is not afraid to be honest and show his ignorance in this area of knowledge.

hi,
i have a SPA-2100 it's a Sipura, and it now asks for a password. I was putting all my settings in for voip provider and now can not get in my admin? i did try the 73738 and that did not work. I was able to put my providers sip and stun all in. is it i'm locked out from my voip provider? If so why would that be, because this is not their device, it's mine? but how do I get back in my admin or can the voip provider I put in, help?
thanks
Message Edited by jokers32463 on 12-22-2008 06:21 PM

Help needed to reset bios

I have a Satellite A40-SP150, somebody entered a password into the bios, and can't start my laptop, how do I reset the bios or how do I reach the rtc battery to reset the bios? Have tried to download the service manual for the laptop but can't find it.
Thanks in advance for the assistance
Carlos Alarcon
Guayaquil- Ecuador

gogogo183, welcome to the forum,
did you buy the system used, directly from Lenovo or from a shop?
There is no supervisor passwords default, it needs to have been set by someone. You need to contact whoever you purchased the X60 from in order to seek assistance with this.
In the forum rules it states;
No posts shall include instructions or directions intended to subvert security measures, including passwords, locking mechanisms, fingerprint scans, etc, nor shall any posts provide descriptions to the location of, nor direct links to content related to these topics.
Regards
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Need to reset my ipad1, lost my notes which I need to recover

I had a hangup on my ipad that required a formal reset. Everything was easily recovered from Itunes. Notes taked in Notes App were not however recovered. Notes had not yet been backed up. Any suggestions on recovering two pages of notes lost?

Reset security questions
http://support.apple.com/kb/HT5312
If you do not have a Rescue email, you need to call/email apple support, they will guide you through the process of resetting your security questions.
https://ssl.apple.com/emea/support/itunes/contact.html
http://support.apple.com/kb/HE57

Help Needed - I think we have lost our photos to the iphone

Our pc crashed yesterday and my fella had to reinstall all of the software which wiped off all of our photos of our 9 month old from the C drive. I was absolutely gutted until he said it's OK they're on my iphone we can get them back.
We don't seem to be able to transfer them back from the iphone to the pc. If they weren't originally taken on the iphone is this not possible?

There may be a 3rd party utility that provides for this but something you should be aware of, photos transferred from your computer to your iPhone are "optimized" as part of the iTunes sync/transfer process for viewing with the iPhone. The original resolution for these photos is permanently lost if you are able to transfer these photos from your iPhone to your computer.
Hindsight is 20/20, but this is one of the reasons why maintaining a backup of your important data is so very important. It isn't a matter of if but when your hard drive has a partial or complete failure since none last forever. It doesn't matter how new or old a computer or computer's hard drive is. This is important regardless the platform, but even more so with a Windows PC with constant virus, adware, and spyware concerns.
The iPhone is not designed for use as a backup device or media, and should not be considered as such.
Unless someone else here can recommend an available 3rd party utility for recovering these photos, try a Google search.

Forgot 4 digit pin code, now have new laptop no back ups!!! help need to reset

forgot my 4 digit pin for black 32g iphone have new laptop no back ups

Look up DFU mode on Google or in the manual.
http://www.google.com/search?source=ig&hl=en&rlz=&q=dfu+iphone&aq=f&aqi=g10&aql= &oq=
That will let you reset it all back to new (you will lose everything since you have no backups).

IPhone 4 reset itself, photos lost -URGENT HELP NEEDED

Hi there,
Urgent help needed!!
Tonight I was taking extremely important photos throughout an event on my iPhone 4, however, my iPhone 4 ran out of battery once I was near a charger I plugged it in and for some reason my iPhone had reset itself. Back up icloud options were from yesterday, but the photos that I was taking at the event are needed urgently. Is there any way possible I can recover the photos that were taken?
Thanks in advance!!!!

Slymm71 wrote:
just had similar problem got email from find my phone saying initiating full phone wipe this cannot be stopped ***? i own the phone from new and registerred in m name but wiped whilst i was using it !!!
See your other post...
https://discussions.apple.com/message/18876037#18876037

HT201401 my iphone accidentally reset,i can't open it now.please help me to do so

i accidentally reset my iphone,now i can't open it. i need help pls.

Hi stlavoie,
You may want to read over this article for enabling your Wi-Fi router and iPhone to be able to work together -
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
For assistance with getting your iPhone activated, I suggest using the steps provided in this article -
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
If you still can not complete activation, note the last step -
If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance.
Thanks for using Apple Support Communities.
Best,
Brett L

NOKIA LUMIA 610,I need a Change.........Symbian is...

When I bought the phone Lumia 610 2 days ago (5-Aug-2012),I was very happy and thought that Like the N72 (my previous mobile) this one will be much better and I buy it,just because it has the BRAND NAME "NOKIA" ,but now I regret it that WHY I have not checked online regarding its various issues.Most importantly its bluetooth problem.
Now if I need to transfer any file of various extension viz. *.jpg,,*.xls,*.doc,etc. from my friend,I will have to ask him to either mail me or to use "SKYDRIVE",and we all know for sure that every one does not have an account on "SKYDRIVE" and both "SKYDRIVE" and "E-Mail" need internet connection,and in India,internet connection in mobile is not common.Don't to yu all think it is more time consuming to upload a file and download the same (which again depend upon the internet connection & speed) than sending it through bluetooh .when I know the file lies just in his hand (mobile) and if I had a blue tooth file transfer facility in my mobile "LUMIA 610" it could have been done in just few minutes.Now I feel I was fool that I bought this "LUMIA 610" ( So I say My N72 was much much better than LUMIA)
I can't even download a file like,*.zip,*.exe,*.msi,*.rar,etc. from differnt website,all because the browser in LUMIA say "This file format is not supported by this device".....I know its not supported by the device,I want to download it ,so that I can,later, transfer it in my computer.You would say I can do the download directly in my computer,WELL YES,I can do that,but In case of large size files,I think it is better to keep the mobile open for downloading ,than desktop or laptop. ( So I say My N72 was much much better than LUMIA)
I want ask Nokia technician and people concern in NOKIA community,can I expect the following changes in my Nokia Lumia 610 from you people.
1). Complete Bluetooth facility (atleast file (of all type) transfer facility)
2). A good browser,so that I can download ,whatever file I want,whether support or not by the windows mobile.
3)A file manager (like the one you have in SYMBIAN OS ),so that I can take a full advantage of my mobile hard disk/drive,manage my files by putting it in my choice of folder(s)
4. A good PC SUITE ,not this stupid ZUNE,which will support the transfer of all types of file (Like the one you provide for SYMBIAN Mobiles.)
IF NOT ALL THESE THEN TELL ME IS IT POSSIBLE TO CHANGE THE OPERATING SYSTEM OF NOKIA LUMIA 610 TO ANY OTHER BEST AVAILABLE SYMBIAN OS. I feel that ,when it come to mobile OS ,NOKIA's SYMBIAN is much much better than WINDOWS phone/mobile OS.
I hope you people would reply positively and quickly because if all these changes are not possible,then I would be selling this stupid LUMIA to some one else,and would have look at some other handset/mobile,possibly of some other company,because at the same range I m getting a good product. (DON'T TELL ME THAT I MADE A MISTAKE BY BUYING LUMIA,ALL I DID WAS TRUSTING A BRAND "NOKIA" WHICH I WAS USING SINCE LONG TIME)

Sorry you feel this way. Personally I think the Lumia 610 is a great phone with a fantastic price.
SkyDrive is included free with your Windows Phone 8.
Why would you want to download msi, exe, etc? You can't use those files on any phone. Why not download those on the device you are going to use them on?
1) This will not be possible until Windows Phone 8.
2) This has nothing to do with the browser. It has to do with OS restrictions and security measures.
3) This will not be possible until Windows Phone 8.
4) This has nothing to do with Zune. It has to do with OS restrictions and security measures. Zune has been scrapped and will no longer be used with Windows Phone 8.
Unfortunately the Lumia 610 will not be able to run Windows Phone 8. It is not possible to change the OS to Symbian.
Microsoft Windows Phone MVP
Follow me on Twitter: @ThisIsMetro
Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

Windows 7 Screen Resolution not changing at all when I try to change settings. I ve lost my ToolBar on internet for settings ( deletion of cache) Please help me to reset screen.

Windows 7 Screen Resolution not changing at all when I try to change settings. I ve lost my ToolBar on internet for settings ( deletion of cache) Please help me to reset screen. The screen seems to have slipped or moved to the right. Only icons on left of
screen showing. I Need to regain The right side of the scree
I have tried everything I know to sort this out. Thankyou you in advance. Katy Nanna x

Hi,
When you set your monitor to a screen resolution that it won't support, the screen will go black for a few seconds while the monitor reverts back to the original resolution.
Regarding screen resolution, we may follow the below two articles to change it:
Change your screen resolution
Getting the best display on your monitor
Follow the steps below:
1. Open Screen Resolution by clicking the Start button, clicking
Control Panel, and then, under Appearance and Personalization, clicking Adjust screen resolution.
2.Click the drop-down list next to Resolution. Check for the resolution marked (recommended). This is your LCD monitor's native resolution—usually the highest resolution your monitor can support.
And if the monitor is LCD monitor, The monitor's manufacturer or reseller should also be able to tell you the native resolution for your LCD monitor. Or we may check the monitor's manual to adjust.
Best regards
Michael Shao
TechNet Community Support

Hi there, I'm Medel and I'm currently on Saudi Arabia. I forgot my security questions' answers and need to reset it but I just added an alternate email a while ago. Can anyone help me how to reset it even if I don't have a recovery email registered?

Can anyone help me how to reset my security questions on my apple account? I forgot the answers and need to reset it. Please Help...

An alternate email is not used for resetting security questions, do you know if you have a rescue email address on your account ? If you do then follow steps 1 to 5 half-way down this page and you should get a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in Saudi Arabia to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699#S
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use

After downloading IOS 8.0.2 on my iPhone 5, my email messages are not automatically coming through. I have to open my mailbox and wait for messages to download. Do I need to reset or change settings for mail? Please help.

After downloading IOS 8.0.2 on my iPhone 5, my email messages are not coming through automatically. Before, my email messages would come through automatically and my iPhone would alert me each time an emial message was recevied. I now have to open my mail in-box and wait for my email messages to download. Do I need to reset or change my mail settings? This issue is delaying my abiliy to receive and respond to email messages in a timely manner.
Please Help.
Jesse

Hi Chris. Thanks, for the suggestions re: my email issues. They were helpful and yes I did check all items you referenced. I even contacted Apple support and spent about 40 minutes on phone checking all settings. However, after all these efforts, my mail and calendar issues were not resolved. Apple Support finally recommended deleting the mail account and then reloading it - and it worked! I am now receiving my emails and calendar appts. in real time again.
Just wanted to share this in case anyone elest has a similar problem with mail/calendar after downloaing i.O.S. 8.1 onto iPhone 5.
Thanks, again.
Jesse

I need to reset my security answers but I've forgotten them please help!

I need to reset my security answers but I've forgotten them please help!

http://support.apple.com/kb/HT5312

I need to reset my security questions however there is no option to send a reset link to email address anyone help?

I need to reset my security questions however there is no option to send a reset link to email address anyone help?

Go to https://getsupport.apple.com ; click 'See all products and services', then 'More Products and Services, then 'Apple ID', then 'Other Apple ID Topics' then 'Forgotten Apple ID security questions'.

I have an imac 2009 the disk drive is damaged and I have lost the passwords I need to reset passwords I tried booting with a macosx disk from an external hard drive but did not read the drive how else can I reset password ?

I have an imac 2009 the disk drive is damaged and I have lost the passwords I need to reset passwords I tried booting with a macosx disk from an external hard drive but did not read the drive how else can I reset password ?
I have a 2012 mac book pro can I use that to connect with firewire and load osx that way? and how woudl I do that?
Thanks so much!

To what password are you referring? Do you mean your user account's admin password? Or do you mean the master password for File Vault or do you mean a Firmware Password?
For an admin password:
Forgot Your Account Password
For Snow Leopard and earlier
     Mac OS X 10.6- If you forget your administrator password
For Lion/Mountain Lion
    Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     When the menubar appears select Terminal from the Utilities menu.
     Enter resetpassword at the prompt and press RETURN. Follow
     instructions in the dialog window that will appear.
     Or see Reset a Mac OS X 10.7 Lion Password and
     OS X Lion- Apple ID can be used to reset your user account password.
If you cannot do the above then try this:
1. Boot to Safe Mode by restarting and after the chime press and hold down the COMMAND-S keys until a black screen with white type appears.
2. At the prompt, type the following commands pressing return after each command line:
     /sbin/fsck -yf
     If you do not receive a "Filesystem OK" message then repeat this command until
     you do. If after seven tries you still do not receive a "Filesystem OK" message,
     then the system is corrupted and needs to be reinstalled.
     mount -uw /
     cd /private/var/db/netinfo
     mv local.nidb local.old
     rm ../.AppleSetupDone
     shutdown -r now
The second-to-last command above will cause OS X to think that the operating system is newly installed, and when the new owner starts up the computer it will send him/her to the startup wizard where he/she can start a new user without reinstalling.
This last method does not actually change a password. It simply removes the user accounts and lets you create an initial admin account as if the computer were new out of the box.
How to reset the OS X password without a startup CD:
Reboot into Single-user Mode. Enter the following and press RETURN after each command line
   1. Type fsck -fy
   2. Type mount -uw /
   3. Type passwd <username>
I have never tried this method myself.

Help Needed - Accidentally Reset Lumia 610 - Lost ...

Similar Messages

Maybe you are looking for