Help needed, can no longer insert Battery3 as a Multi, Core Audio Error.

Hi all,
Well I have been using a few different Motu interfaces as of late, the Ultralite, Traveler and now the 828 MK2. Each device has had no troubles with hBattery as a muti untill now the 828.
I have loaded all sorts of other mutli devices but for some reason battery is a no go, I get a core audio error of -1 ?
Now I have yet to install a different driver set since it was my understanding all Motu drivers are the same and the Audio interface driver page shows the 828 so I figured all was well.
Any one have any ideas as to what I can do? This one has me stumped.
Thanks in advance!

I have the exact same issue, battery 3 won't load as a multi. it's authorized and works as a stereo audio unit, but when i try to load the multi, i also get error code -1. btw, this happened today - yesterday the multi worked. i already trashed the logic and battery prefs, no go.

Similar Messages

Help, I can no longer open my IPhoto, I get a message that says the library needs to be upgraded to work with this version of IPhoto

Help, I can no longer open my I Photo's. I get a message that says the library needs to be updated to work with this version of IPhoto. What have I done and what can I do to view them again.

You're welcome
It should have showed you a progress bar, and hopefully it was moving steadily

HT4623 can no longer insert photo or video in email

Hi there new Iphone 5s latest update, can no longer insert photo or video in an email have to copy and paste which is tedious, any suggestions, thank you!

Hi thanks elmac unfortunately has made no difference, I've rebooted everything and reset. I have the latest update so don't understand why it's not working?

Help needed on restoring Iphone..post IOS update..getting an error -1

Help needed on restoring Iphone..post IOS update..getting an error -1

try restarting your computer i had that problem i unplugged my phone from itunes restarted my computer and then it worked

Urgent help needed, can I restore N900 Backup file...

i owned a N900 (now sold out)
before selling i took backup of contacts from backup restore option in application section
now i bought a N8 but i m not able to restore my contacts
1. is there any way to restore them in N8?
2. if not, can i convert them in TEXT or any readable format
urgent help needed
thanks in advance

The backup procedures built into the phone are only designed for restoring to the same phone (ie: in case or data corruption, software update or repair etc.), they can't usually be used to restore to a phone with a different operating system.
You should have backed up with Ovi Suite before selling the N900, that would have been able to restore to the N8.

Help, I can no longer send/receive images in messenger on my iphone 4

I have noticed that I can no longer send or receive images in messenger on my phone since the first IOS 7 update. Now i'm noticing that I can not send/receive anything other than text. Also, I can not receive the messages that are sent to a group, which is bad since my boss only sends group messages when we are closed for weather.
I have updated to the latest IOS 7.0.6 tonight but not sure what to do to start sending images again. I would really like to be able to share some of my pics with others and not have to post them to facebook. Any help would be greatly appreciated, thanks so much for your time.
Jennifer

What happens when you try?
Is the music selected to sync?
Have you tried the basics from the manual?
Restart, reset, restore

HELP-Songs can no longer be dragged into playlists on my Itunes

I have noticed recently that I can no longer click and 'drag' my songs from my library play list, to other playlists on itunes. Is there another way I can transfer specific songs from the library to my playlists? Or is there a way I can fix it so I can continue to drag my songs from the library to other playlists?
Thank you!

Are you trying to drag songs to a regular or a smart playlist? You cannot drag songs to a smart playlist, instead you have to make the tags match the smart playlists conditions (or make the conditions match the tags). If you are having problems dragging to a regular playlist, try opening that playlist in a second window by double clicking on it, move it aside so you can see both iTunes windows, and try dragging the song from the Library into the playlist's window.

Help! Can any tell me what cause / remedy is for this error

Can any tell me what cause / remedy is for this error:
[1/29/08 10:52:05:009 GMT] 4131a8 SystemOut
U 2008-01-29 10:52:05,009 [QuartzWorkerThread-0] FATAL
com.scheduler.service.businessservice.ReportExecution
() 190470534 - ****** METHOD FAILED ******WebIntelligence SDK / JSP
Exception --- Number :10480 --- javaError : WI Internal Error = 100
--- Description : WI Error while trying to get HTML view for the
document

Afraid I haven't seen that before. The only thing I could suggest is to boot from the 1st Install disk and run the hardware test. I would wonder about the video card. You might also post in the MacPro forum. I just got MY MacPro today, and the MacPro Forum is where I would go:
http://discussions.apple.com/category.jspa?categoryID=194
The only other thing I can think of is to launch Console from the Utilities folder and see if any errors are being reported.
Francine
Francine
Schwieder

Can I use a Protools HD interface as core audio for Logic 9?

I am moving to a studio that already has Protools HD running on Mountain Lion.
I don't especially like PT, so my question is... can I just use the PT HD hardware already there and run Logic and my AU plugs without using TDM?
And if I do, how would it compare to the RME Fireface 800 I am currently using?
Or would I be better off taking the RME and switching between the units depending on who was driving in the studio?
Thanks in anticipation

Yes, higher latency...
Avid/Digidesign never put a lot of effort into their core audio drivers because they would rather have you purchase their hardware which uses proprietary drivers.
There is an I/O limit but from the looks of it you won't be coming close.
Offhand I'd say you will be missing the RME hardware but it may work for you.
Keep us posted as to how it's going.

HELP! Can No longer edit certain files in DW CS5

I was editing these fine for the past two days and i reuploaded them to the ftp server and had to make a change to one and now they are all greyed out and impossible to edit here is code:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />

<title>CreditDoneRight.net</title>



<link href="creditdoneright.css" rel="stylesheet" type="text/css" />
</head>
<body class="twoColFixRtHdr">
<div id="container">
<div id="header">
    <h1> </h1>
</div>
<div id="sidebar1">
    <h1> </h1>
    <h1>Yes, please contact me!</h1>
    <form action="login/contact.php" method="post">
      <table>
        <tr>
          <td><p>Name</p></td>
        </tr>
        <tr>
          <td><input type="text" name="name" /></td>
        </tr>
        <tr>
          <td><p>Phone Number</p></td>
        </tr>
        <tr>
          <td><input type="text" name="phone" /></td>
        </tr>
        <tr>
          <td><p>Email Address</p></td>
        </tr>
        <tr>
          <td><input type="text" name="email" /></td>
        </tr>
        <tr>
          <td><p>Referred By/ Promotion Code</p></td>
        </tr>
        <tr>
          <td><input type="text" name="code" /></td>
        </tr>
        <tr>
          <td><p>My Goal Is</p></td>
        </tr>
        <tr>
          <td><label>
            <select name="Goals" id="Goals">
              <option selected="selected">Select One</option>
              <option value="A Better Credit Score">A Better Credit Score</option>
              <option value="Remove Bankruptcy">Remove Bankruptcy</option>
              <option value="Remove Negative Items">Remove Negative Items</option>
              <option value="Inquiry Removal">Inquiry Removal</option>
              <option value="Line of Credit">Acquire Line of Credit</option>
              <option value="More Than One">More Than One Above</option>
            </select>
          </label></td>
        </tr>
        <tr>
          <td><p>Notes</p></td>
        </tr>
        <tr>
          <td><textarea name="note"></textarea></td>
        </tr>
        <tr>
          <td><p>
            <label>
              <input type="checkbox" name="Privacy" id="Privacy" />
            </label>
            I understand that all information entered here is held strictly confidential and WILL NOT be shared with anyone.</p></td>
        </tr>
        <tr>
          <td colspan="2" align="center"><input type="submit" value="submit" /></td>
        </tr>
      </table>
      <p>**<a href="termsofservice.html">Terms of Service Agreement</a></p>
      <p>** <a href="repsignup.html">Representative Sign Up</a></p>
      <p>--<a href="http://www.creditdoneright.net/login/login.htm">Back Office Login</a></p>
    </form>
</div>
<div id="mainContent">
    <h1> <br />
    <strong> Terms of Service Agreement</strong></h1>
    <p><a href="terms.pdf">CLICK HERE</a> to download the Terms of Service Agreement.</p>
    <p><strong>MCRA, LLC</strong><br />
      Phone Number: <strong>419-491-4676</strong></p>
<p>Before you sign below to acknowledge the terms and conditions, please take a moment to read the "Consumer Credit File Rights Under State and Federal Law" which can be found on our <a href="index.html#information">Home page at the bottom</a>.</p>
    <p>By Signing below, I confirm the fact that I agree and understand what I am signing, and acknowledge that I have received a copy of Consumer Credit File Rights Under State and Federal Law.</p>
    <p>I, _______________, give permission to MCRA, LLC to pull all three of my credit reports. These include Experian®, Equifax®, and TransUnion®. I understand that my credit score will not be negatively affected by allowing MCRA, LLC to pull my credit reports. I understand that the purpose for my credit being pulled is so that MCRA, LLC may evaluate my credit situation and take appropriate actions to help improve my credit situation and my credit score(s). I understand that MCRA, LLC will be communicating with these three credit reporting agencies on my behalf. I give permission to MCRA, LLC to communicate with Experian®, Equifax®, and TransUnion® on my behalf.</p>
    <p><strong><u>TERMS OF SERVICE AGREEMENT</u></strong><strong> </strong></p>
    <p>Credit Done Right in conjunction with MCRA will be addressed herein as The Company.</p>
    <p>The Company will provide credit repair/restoration services for clients upon request, and will be executed ONLY upon acceptance of the terms of service included within this agreement. </p>
    <p>The Company's credit repair/restoration service will be performed in an expeditious manner and in accordance with all federal, state, and local laws. The Company will make NO GUARANTEES and WILL NOT under any circumstances make any false or misleading claims to any of it's clients and/or referring agents. It is very important to understand that the results of any/all investigations performed on client's behalf are the responsibility of the investigating credit reporting agencies and the creditors being investigated. The Company will dispute any/all credit items that appear to be inaccurate, incomplete, unverifiable, or otherwise questionable with all three major credit reporting agencies, Equifax, TransUnion, and Experian.</p>
    <p>I understand that prior attempts by myself, or any other agents acting on my behalf, to conduct a credit repair/restoration program may cause delays with The Company's efforts to complete this process.   I also understand that prior attempts may cause the inability of The Company to acquire credit reports and/or other documents necessary to complete this process. In the event the acquisition of credit report(s) and/or other documentation is not possible or otherwise impaired, The Company will request client and/or client's agent assist in the acquisition and forwarding of requested reports and/or documentation. The Company will not be held liable for service(s) not completed due to client and/or client agent's failure to comply with any such request. It may be necessary at times for client and/or client agent to purchase a copy or copies of credit reports if The Company is unable to access reports via no-cost means. The Company will exhaust all efforts to access client reports free of charge.</p>
    <p>The Company's advertised guarantee only applies if you meet the following criteria:</p>
    <ul>
      <li>You, or any person(s) or organization, have not previously attempted credit repair.</li>
    </ul>
    <ul type="disc">
      <li>You, or any person(s) or organization, have not       previously attempted removal of credit inquiries from your credit reports.</li>
      <li>You, or any person(s) or organization, have not       previously attempted debt          settlements       for negative accounts on your credit reports.</li>
      <li>Prior to the execution of your credit repair       program, you must acquire membership with a company that provides a credit       monitoring service for your Equifax, TransUnion, and Experian credit       reports.</li>
    </ul>
    <p> </p>
    <p>In the event The Company has difficulty accessing any of the credit file information, they will contact you in an effort to help gain access. Failure to assist or to respond will nullify the advertised guarantee.</p>
    <p>Please keep in mind that even though you may not qualify for the guarantee, we can still help you make significant progress with your credit reports and scores.</p>
    <p>The following is a standard fee schedule for The Company services. These fees will apply unless alternate prior arrangements have been made with The Company.   Please note that all fees will be defined as a refundable deposit until positive results have been achieved, then will be defined as full payment for services rendered. </p>
    <ul type="disc">
      <li>Inquiry Removal Package: Prices for inquiry       removal are as follows 1-10 inquiries $150, 11-20 inquiries $250, 21+       inquiries $350.</li>
      <li>Premium Package (best value): Unbelievably       $299.00 (Package refundable if we are unable to raise you score in 60       days.) -- Credit Repair Package includes up to 15 negative items including       inquiries being removed off of your report.</li>
      <li>Flat Rate Package: Only $499.00 -- This plan is       reserved for those who do not wish to pay for each credit item that is       repaired and want their case handled with the highest priority. This plan       may be the answer for you if you are trying to meet a deadline or have       excessive negative items or inquiries on your credit reports. This plan       will pay for ALL repaired items, no matter how many are on your report(s).       It also includes the Inquiry Removal Package. This fee must be paid in       full before the service begins.</li>
    </ul>
    <p> </p>
    <p>The Company may offer promotions from third party providers as a courtesy to it's clients and/or client agents.   Clients and/or client agents must acknowledge that The Company cannot and will not attempt to act or speak on behalf of any third party service providers, as The Company has no direct affiliation with said service providers other than offering their service(s) as a promotion or a courtesy. The Company clients and/or client agents will never be required to participate in third party services. No client and/or client agent information will be provided to any third party service providers by The Company. Any third party services offered to The Company clients and/or client agents are to be negotiated directly between client and/or client agent, and the third party service provider, without the assistance of The Company. The Company will be held harmless of any and all circumstances or issues that may arise between client and/or client agent, and third party service provider(s).</p>
    <p>The Company provides a fair and affordable service for all it's clients and/or client agents, therefore takes chargebacks very seriously. The Company will exhaust every effort to rectify any issues that may lead to a chargeback. It is very important to understand that The Company will prosecute any and all chargebacks to the fullest extent of the law. Upon contacting The Company about any issues that could potentially lead to a chargeback, The Company will quickly review client account and find a resolution that is fair to both client and The Company. If The Company is unable to help client and/or client agent, and cannot make any improvements on their credit file(s), a full refund will be due to client and/or client agent.</p>
    <p>The Company protects client and/or client agent privacy. The Company will never sell, share, or otherwise distribute any of it's client and/or client agent information with any third parties. All information used by The Company to provide services is entered into secure servers only for the purposes of acquiring documents pertinent to completing services.</p>
    <p><strong>LIMITED POWER OF ATTORNEY</strong></p>
    <p>I authorize The Company to act on my behalf whenever necessary to correspond only with immediate providers of portions of my credit repair and/or inquiry removal service.</p>
    <p>_______________________________      _________________________________<br />
      Client Signature                                                                     Date </p>
    <p> </p>
    <p><strong>ACKNOWLEDGE AND AGREE TO TERMS OF SERVICE</strong></p>
    <p>By signing below, I agree to the terms of service outlined within this terms of service agreement.</p>
    <p> </p>
    <p>______________________________      _________________________________<br />
      Client Signature                                                                     Date   </p>
    <p> </p>
    <p>"<strong>NOTICE OF CANCELLATION </strong>(Please print this portion, date, sign, and return if you wish to cancel, as outlined below): You may cancel this contract, without penalty or obligation, within three days after the date the contract is signed. If you cancel, any payment made by you under this contract will be returned within ten days after the date of receipt by the seller of your cancellation notice. To cancel this contract, mail or deliver a signed and dated copy of this cancellation notice, or other written notice to:</p>
    <p>MCRA, LLC at ADDRESS not later than midnight of the final eligible day of cancellation.</p>
    <p>I hereby cancel this transaction.</p>
    <p>Date: ____________</p>
    <p>Buyer's Signature:____________________"
      
    </p>
</div>
          <br class="clearfloat" />
<div id="footer">
    <p><img src="images/footer.jpg" width="948" height="35" border="0" usemap="#Map2" />
      <map name="Map2" id="Map2">
        <area shape="rect" coords="397,7,534,18" href="http://www.creditdoneright.net" target="_self" alt="CreditDoneRight.net" />
        <area shape="rect" coords="551,6,665,18" href="http://www.mcraproducts.com" target="_blank" />
        <area shape="rect" coords="469,18,558,29" href="http://www.kddezine.com" target="_blank" alt="KDDezine.com" />
      </map>
    </p>
</div>
</div>
</body>
</html>

Your Template code is incomplete / corrupted.
That's why you can't edit it.
Try opening your .dwt file in a plain text editor like NotePad. Remove the editable regions from code. Save. Open in DW.
You will need to SaveAs Template (same name as the one used by your child pages). Add editable regions to match the ones in your child pages. Save.
Nancy O.

Please help. Can no longer connect to my Mac Mini Server

Up until two days ago, my iMacs were connecting to my Mac Mini Server normally. All of a sudden I could no longer transfer files without being prompted to type my password. Enter password and nothing happened, then got an error message stating that I don't have permission to do that. Now, a day later, no acces to my server. Has anyone ever experienced this? Can anyone please help? I've read the Mac mini booklet but doesn't have any troubleshooting info. Thanks in advance.

Hello MrHoffman,
Thank you for the advice. I went into Terminal first and typed in your command and this is what resulted:
Last login: Fri Jan 24 22:39:08 on ttys000
serverX:~ serverx$ sudo changeip -checkhostname
Password:
Sorry, try again.
Password:
Sorry, try again.
Password:
Primary address     = 192.168.1.7
Current HostName    = serverX.private
The DNS hostname is not available, please repair DNS and re-run this tool.
dirserv:success = "success"
serverX:~ serverx$
serverX:~ serverx$
I'm not very experienced with programming or coding, but this message seems to indicate that there's a problem with DNS just like you noted. I've highlighted the note in bold...What can you make of this or the logs from console below?
Below is what I found in Console:
1/24/14 8:55:08 AM          com.apple.launchd[1]          *** launchd[1] has started up. ***
1/24/14 8:55:19 AM          com.apple.launchd[1]          (com.apple.NotificationServer[73]) Suspicious setup: User "jabber" maps to user: _jabber
1/24/14 8:55:25 AM          edu.mit.Kerberos.kadmind[58]          kadmind: starting...
1/24/14 8:55:27 AM          org.jabber.jabberd[53]          ERROR: Could not create /var/run/jabberd: Permission denied
1/24/14 8:55:27 AM          com.apple.launchd[1]          (org.jabber.jabberd[53]) Exited with exit code: 1
1/24/14 8:55:27 AM          com.apple.launchd[1]          (org.jabber.jabberd) Throttling respawn: Will start in 1 seconds
1/24/14 8:55:28 AM          org.jabber.jabberd[130]          ERROR: Could not create /var/run/jabberd: Permission denied
1/24/14 8:55:28 AM          com.apple.launchd[1]          (org.jabber.jabberd[130]) Exited with exit code: 1
1/24/14 8:55:28 AM          com.apple.launchd[1]          (org.jabber.jabberd) Throttling respawn: Will start in 10 seconds
1/24/14 8:55:28 AM          com.apple.printservice_LPR_mDNS_Plotter_Epson_7600[70]          Registering Service Plotter Epson 7600._printer._tcp port 515 TXT txtvers=1 qtotal=1 rp=Plotter_Epson_7600 pdl=application/postscript ty=$null$
1/24/14 8:55:28 AM          com.apple.printservice_LPR_mDNS_Plotter_Epson_7600[70]           8:55:28.703 Got a reply for service Plotter Epson 7600._printer._tcp.local.: Name now registered and active
1/24/14 8:55:30 AM          org.jabber.proxy65[52]          /System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python /twisted/persisted/sob.py:12: DeprecationWarning: the md5 module is deprecated; use hashlib instead
1/24/14 8:55:30 AM          org.jabber.proxy65[52]            import os, md5, sys
1/24/14 8:55:30 AM          org.jabber.proxy65[52]          /System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python /twisted/python/filepath.py:12: DeprecationWarning: the sha module is deprecated; use the hashlib module instead
1/24/14 8:55:34 AM          com.apple.launchd.peruser.501[174]          (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
1/24/14 8:55:35 AM          ServerScanner[200]          Preference says we shouldn't scan
Thanks!

Help ! - Can no longer copy backup files, nor access the drive vols via USB

Need help. I have a WD 320 gig drive with (3) Partitions:
1. Mac OS File system
2. Mac OS File system
3. MS DOS file system
I am trying to migrate the files and dir's on this drive to another, but am unable to. History:
The drive was used as a USB/FW backup. Time machine can access and write to the Mac partitions. The drive has been backed up both via FW/USB and Airport disk. Drive is now filling up and I cannot access the backup files (dir's) to copy them: " Sorry, you do not have sufficient access priviledges..."
If I disconnect and try to migrate the files manually via FW or USB - I get a similar error. Windows is visible both online and off. What gives ? Is this a result of Airport disk ? Time Machine ? or both ?
I used to be able to migrate files on and off just fine. By only recourse will be to partition and erase it seems. Need any help ......thanks

Your Template code is incomplete / corrupted.
That's why you can't edit it.
Try opening your .dwt file in a plain text editor like NotePad. Remove the editable regions from code. Save. Open in DW.
You will need to SaveAs Template (same name as the one used by your child pages). Add editable regions to match the ones in your child pages. Save.
Nancy O.

Application And Gaming / Port Forwarding || HELP NEEDED || Can Only Access Via LAN

Hi.
I have just bought a Wireless Router, Model Number: WGKPC354G-UK. With the intention of setting up a small server. This server will run from my PC (directly wired into router), running a game called "Counter Strike" - I had to download a dedicated-server tool for this and i successfuly installed this and followed the tutorial to set it all up..
So I thought i had done it, but I could only access my server with my internal IP 192.168.1.64 (LAN).
I then found out that i needed to "Port-Forward" I followed a tutorial on www.portforward.com - This showed me how to open the ports, and which ones to open.
I did all this and i still encounter the same problem !
So i then opened all my router ports "DNZ" and it still doesnt work !!!
Any help will be greatly aprreciated !
PS. Below Are The Required Ports.
http://portforward.com/english/routers/port_forwarding/Linksys/WAG354G/Counter_Strike.htm

Keep in mind your ISP could be blocking the ports needed. DMZ almost ALWAYS works and if it doesnt, most likely your ISP blocks the ports.
another test is to make sure you can connect to the game server from another CS machine on the inside of your network. If this works, that means your server is up and running properly and its probably your ISP blocking certain ports needed for the CS Server.
You should also check you have the Windows firewall disabled, and any other software firewall on your server disabled.

Need to execute Long Insert (6000 characters)statement using dbms_sql.parse

I built an insert statement which is more than 6000 (six thousand) characters stored into two varchar2 variables. I need to execute the statement using dbms_sql.parse.
I tryed using dbms_sql.varchar2s variable and having no success.
Any ideas or examples?
Thanks
JK

6000 chars shouldn't be a problem.
What do you mean with no success?Did you get any error?
Any ideas or examples?See this thread
Re: execute immediate with a string longer than 32767

Help needed - can't switch to page

I followed a tutorial about how to create a simple website. The buttons i've created SHOULD fade out the current page and fade in the new page. In it's current state it fades out the m1 instance (mainmenu_mc) but won't fade in the new page selected(p1,p2,p3orp4). After it's faded out if i click in the same area the button was the mainmenu_mc page flashes onto the screen. and when i let go of clicking it, dissapears again.
I hope i've made the situation clear enough for you to understand and you can help me out with this project.
Code:
var m1:mainmenu_mc =new mainmenu_mc;
var p1:page1 =new page1;
var p2:page2 =new page2;
var p3:page3 =new page3;
var p4:page4 =new page4;
pageContainer_mc.addChild(m1);
import fl.transitions.Tween;
import fl.transitions.TweenEvent;
m1.menuBtn1_btn.addEventListener(MouseEvent.CLICK, btn1Click);
m1.menuBtn2_btn.addEventListener(MouseEvent.CLICK, btn2Click);
m1.menuBtn3_btn.addEventListener(MouseEvent.CLICK, btn3Click);
m1.menuBtn4_btn.addEventListener(MouseEvent.CLICK, btn4Click);
function btn1Click (event:MouseEvent):void{
var btn1Outro:Tween = new Tween(pageContainer_mc, "alpha", Strong.easeOut, 1,0,1, true);
btn1Outro.addEventListener(TweenEvent.MOTION_FINISH, runBtn1Transition);
function runBtn1Transition (event:TweenEvent):void{
pageContainer_mc.removeChildAt(1);
pageContainer_mc.addChild(p1);
var btn1Intro:Tween = new Tween(pageContainer_mc, "alpha", Strong.easeOut, 0,1,1, true);
function btn2Click (event:MouseEvent):void{
var btn2Outro:Tween = new Tween(pageContainer_mc, "alpha", Strong.easeOut, 1,0,1, true);
btn2Outro.addEventListener(TweenEvent.MOTION_FINISH, runBtn2Transition);
function runBtn2Transition (event:TweenEvent):void{
pageContainer_mc.removeChildAt(1);
pageContainer_mc.addChild(p2);
var btn1Intro:Tween = new Tween(pageContainer_mc, "alpha", Strong.easeOut, 0,1,1, true);
function btn3Click (event:MouseEvent):void{
var btn3Outro:Tween = new Tween(pageContainer_mc, "alpha", Strong.easeOut, 1,0,1, true);
btn3Outro.addEventListener(TweenEvent.MOTION_FINISH, runBtn3Transition);
function runBtn3Transition (event:TweenEvent):void{
pageContainer_mc.removeChildAt(1);
pageContainer_mc.addChild(p3);
var btn1Intro:Tween = new Tween(pageContainer_mc, "alpha", Strong.easeOut, 0,1,1, true);
function btn4Click (event:MouseEvent):void{
var btn4Outro:Tween = new Tween(pageContainer_mc, "alpha", Strong.easeOut, 1,0,1, true);
btn4Outro.addEventListener(TweenEvent.MOTION_FINISH, runBtn4Transition);
function runBtn4Transition (event:TweenEvent):void{
pageContainer_mc.removeChildAt(1);
pageContainer_mc.addChild(p4);
var btn1Intro:Tween = new Tween(pageContainer_mc, "alpha", Strong.easeOut, 0,1,1, true);

A few things I notice off the bat...
1) You should not be nesting functions within functions. It is bad practice and unnec3saary.
2) If you are removing the childAt 1, are you sure that is what you intend? Child indexes start at 0.
3) If you only fade an object by reducing its alpha property to 0 it is still present and can still be clicked/interacted with. Removing the child should help avoid that, but otherwise setting the visible property to false is necessary.
While having repetitive code in itself is not a functional problem, whenever you have code such as you show where a pattern is repeated, you should be able to reduce it all and have a singular shared function that replace all those of that pattern. In your case, the only difference between them all is a single digit (1,2,3,4), which you could deal with in a number of ways such that you onkly need one btnClick function and one runTransition function that can be shared by all the buttons.

Help needed, can no longer insert Battery3 as a Multi, Core Audio Error.

Similar Messages

Maybe you are looking for