Help needed: Canon 5D Mark II video to Apple TV conversion

I'm new to Apple TV and would appreciate any advice.
I have been taking Full HD video 1920 x 1080 using my Canon 5D Mark II. Would like to play these files through Apple TV. What do I need to do? Do I need any conversion tool? If so, any recommendation?
Thanks in advance!

Just picked up a 5D II myself, having waited for what seemed like an eternity for a 5D replacement.
You have 2 options for video on the 5D II
SD - 4:3 at 640x480
HD - 16:9 at 1080p 30fps
Both are encoded as h264, but even the SD seems to have far too high a bitrate for AppleTV in my limited tests so far.
Neither format will play without conversion - the 1080p 30fps is beyond AppleTV spec so you will have to convert it to 720p at 24/25fps or less (max it handles in theory) but that changes the frame rate which is not ideal so you may be better going for 960x540 at 30 fps. Both have bitrates which are too high - you need a max of 5Mbps for AppleTV. Both record audio as mono WAVs (unless you connect an external mic) so you need to convert the audio track to AAC at 160kbps or less, don't change the sample rate.
I've not had much time to play but have done a couple of conversions in QT Pro and others direct in iTunes - too early to comment on quality of conversions yet - as I'm sure you've found doing manual focus can be quite hard while looking at live view and will take some practice.

Similar Messages

HELP! CANON 5D MARK III TO FCP 7- WHAT IS CORRECT COMPRESSION? LINES THROUGH VIDEO-HELP!

Hi there, so Ive just upgraded from the T2i to Canon 5D Mark III and this is the first time I'm importing footage to final cut. I have FCP 7 (Mac computer) and my video files are 1920x1080, h264 codec shot at 30 fps (29.97). Previously, when importing from the T2i, I used MPEG Streamclip to convert my video files to Apple Prores 422, and then import those compressed files into FCP 7, with field dominance being UPPER, pixels SQUARE. I never had an issue of quality loss or lines through my viewer and canvas using these settings. However, after attempting to do the same with my footage from the Mark III, I got lines through my footage. After researching a bit, I was convinced that the way to eliminate the problem was to download the 5DTORGB app for $50. This has not fixed my problem! Have tried multiple combinations of different field dominance settings and nothing is working. Is this an interlacing problem? I attempted to catch a screenshot but everytime I pause the video or take a shot, the lines do not show...I do not know what is going on! My original mov files are fine, it is only once I convert and import to final cut that they get these little lines... I am desperate for answers, please someone help!!!

Still no change....However, I did export a trial and the vid looks fine, no lines. I guess fcp is just being a little *****! It is just really frustrating me to have to work with these lines going through my clips, even if they do not appear in my exported file....I feel that there must be some hidden issue with my sequence settings....Could you possibly provide a screenshot of the appropriate sequence settings you would use to match a 1920x1080 file with 29.97 fps (already converted from h264 to apple prores 422 thru 5DTORGB) ? I know that usually it is fine to import the newly compressed prores files, and then set sequence to match clips, but since I'm having issues, maybe setting the sequence directly would help?
This is what my sequence settings look like right now, after being matched to my prores clip....
I am concerned because it shows Aspect ratio as HDTV 1080i (16:9) though you have told me my clips from the 5D should be progressive (so shouldnt it be 1080p not 1080i??) Being that there is not option in frame size for 1080p, i tried selecting the "Custom (16:9)" option, but it will not allow it...Just sets it back to 1080i......Any thoughts?

How do you guys reduce noise in Canon 5d mark II video?

I am really interested to know if anybody could give me leads on how to reduce noise in 5d mark II videos. First off - Canon 5d mark II stock HD bitrate is not really nice. Even shooting in day time I have color noise and a lot of noise in shadow areas. Its only after I played with ML 2.3 and tried to shoot 1080p vid on CBR 1.4x mode (thats the maximum bitrate supported by my present CF card but planning to buy a new one).
How do you guys deal with it?

Tests have been done that show ISO settings in multiples of 160 produce the least amount of noise on video. Starting at 160 the 5Dmkii produces less noise than even at lower ISO settings of even 100 ISO. 160, 320, 480(500), 640 and so on. If you need ISO settings of a lot higher and the noise becomes obvious there is video noise reduction software that could help.

Help Needed With "Extend Marker" Function Not Working

I have several Clips and used the "DV Start/Stop Detect" function to find the time code breaks, which seems to work well. I've now got a clip full of Segment markers.
The problem arises when I try to use Extent Markers "Option + `" to make subclips. When I put the play head on a subsequent marker, the Marker/Extend function is grayed out.
Extending a marker that I have created using the M key works perfectly.
Why can I not use the Extend function on Segment Markers?
Any help on this is greatly appreciated. I have 30 odd clips that I need to set up segments for, and doing it manually will add hours to my workload.
Thanks
Gary
Dual G5 2.5 GHz Dual Core, 2.5 GB RAM, 500 GB HDD Mac OS X (10.4.3) Final Cut Studio FCP 5.0.4

Thanks for the reply.
I am completely aware of items 1 through 3, and never Extend markers in the Timeline. Only the Viewer.
To perform an Extend Marker and avoid headaches, load the captured clip - the one with the video icon in the Browser - into the Viewer. Then, as you scrub along in the Viewer, Option-` as needed.
That is precisely what I am doing.
To Extend the marker I first double click the clip to load the entire clip into the Viewer, where all the Section markers are displayed. I then check Mark>Markers>Extend and the function is grayed out. However, if I move the playhead one frame prior to the Section marker, the previous Section marker extends to the frame prior to the new play head position.
If I do this with manually entered markers (using the M key, creating Marker 1, 2, 3.... in sequence on the Viewer timeline), then the Previous marker is extended to the frame immediately prior the the current play head position - i.e. from Marker 1 to Marker 2. I do not have to move off the Marker 2 position to be able to extend Marker 1.
Also, simply selecting all your Markers and either dragging them to another bin (or pressing Command-U) does not produce the needed subclips?
Of this I am also aware. I find the Command-U process just confuses the issue, creating more clips to manage (others may disagree). I prefer to simply drag the "Subclips" directly from the Main clip into a Timeline.
Because you're doing all this to get subclips, right? Or wrong?
If I understand your reply correctly, I think you misunderstood my problem. I have been using subclips for several years, and find them VERY useful, especially with multi-camera shoots. So, I am quite familiar with creating and extending markers.
I just started experimenting with the Detect feature and find it works quit well (most of the time). My problem is that the Segment markers created by the Detect process, do not perform the same as manually place markers, as far as the Extend marker function is concerned, anyway.
BTW - By using the TC display in my Panasonic PV-GS400 Camera, and sending the FCP video via Firewire to the camera, the camera displays the TC on the captured clip, which I then rename the marker to for TC reference. As long as the Date/Time on the cameras are properly synced, syncing clips in the Timeline is a breeze!!
Anyway, to clarify, my process is as follows:
1. Capture a clip.
2. Display the clip in the Viewer
3. Select "DV Start/Stop Detect" and watch as the section markers appear in the Viewer.
4. In Viewer, place play head on the first Section marker
5. Press the M key to Edit Marker.
6. Change the Name of the marker to the timecode of the Marker now displayed in the Camcorder window.
7. Use Shift-Down Arrow to move to the next Section Marker
8. Press Option+` to Extend the previous marker - which does not work and is grayed out in the Mark>Markers>Extend menu.
9. Back to step 5.
This process works perfectly with manually created markers. Because the Extend works if I move the play head one frame prior to the current Section marker, this tells me there is something "special" about the Section marker that disables the Extend function, unlike a manually created marker.
BTW - If I delete the Section marker, and create a manual marker at the same frame, the Extend marker function works again. Again, indicating that Section markers are different somehow from manual Markers.
Hopefully, this wordy explanation of my process clarifies my problem.
Aside: The clips are supplied to me by a customer on a 500GB FW800 drive. FCP5 was used to capture the clips from the original Tapes (which I do not have access to). I am the editor for the project.
Thanks again for the reply. It is greatly appreciated. If there is any other info that I have missed that will help figure this out, please let me know and I will post a response a quickly as possible.
Gary

URGENT help needed in creating external xml video plalist. Please help!

I was given an assignment to create and external video playlist using an xml file. I have never used flash before, know nothing about encoding and all that was given to the class in terms of instuctions was a short tutorial that has no resources for troubleshooting. We were given everything; the external playlist file equipped with the video skin, the video list, actionscript that loads the xml and the xml file. We were told that all we need to do is change the names of the videos in the xml file to match the names of our videos. I did that. We were also told we needed to "name target", but we were not informed on how to do this. I have tried everything, visited every tutorial and I cannot figure out how to get this damn thing to work. I cannot even get flash to load the xml file. PLEASE HELP.
Here is the xml file:
<?xml version = "1.0" encoding = "i-8859-1"?>
<playlist>
<ADogWithoutABone
flvurl="ADogWithoutABone.flv"
desc="Hyper Wall First Video" />
<Highway
flvurl="Highway.flv"
desc="Hyper Wall Second Video" />
<PsychoBabble
flvurl="PsychoBabble.flv"
desc="Hyper Wall Third Video" />
<SomethingElse
flvurl="SomethingElse.flv"
desc="Hyper Wall Fourth Video" />
</playlist>
I tried putting in the entire address of the file location, but it did nothing.
Here is the actionscript in the flash file:
var xmlLoader:URLLoader = new URLLoader();
xmlLoader.addEventListener(Event.COMPLETE, xmlLoaded);
xmlLoader.load(new URLRequest("playlistXML.xml"));
function xmlLoaded(event:Event):void {
var playlistXML:XML = new XML(event.target.data);
var item:XML;
for each(item in playlistXML.videoname) {
trace("item: "+item.attribute("flvurl").toXMLString());
myPlayList.addItem({label:item.attribute("desc").toXMLString(), data:item.attribute("flvurl").toXMLString()});
//Select the first video
myPlayList.selectedIndex = 0;
//And automatically play it
myPlayScreen.play(myPlayList.selectedItem.data);
//Add a listener to detect when new video is selected and play it
function listListener(event:Event) {
myPlayScreen.play(event.target.selectedItem.data);
myPlayList.addEventListener(Event.CHANGE, listListener);
I tried placing the full address of the xml file in, along with the file address of the videos, but again it did nothing. Everything is located in the same file, and the videos in a sub file in that file. I tried taking out the sub file and putting all the videos in the same file, but it did nothing. I am sure it's something very simple, but like I said I have NO experience with this whatsoever. I am SO lost and DESPERATELY need help. PLEASE someone SAVE MEEEE!
Thanks

It might be a crossdomain.xml problem.
Please make sure that the server hosting the xml allows the domain where the swf is hosted.
You can start with:
<?xml version="1.0" encoding="utf-8" ?>
<cross-domain-policy>
<allow-access-from domain="*"/>
<site-control permitted-cross-domain-policies="master-only"/>
</cross-domain-policy>

Aperture & Lion not recognizing Canon 1D Mark IV videos

Upgraded the 17" MBP i7 to Lion.
When I import 1D Mark IV photos and videos from a CF card, it takes forever if there are videos on the card. It's fine if there's not. And when the videos come in to Aperture, they're not recognized as video files (even though they're .MOV files). Quicktime Player plays them fine.
Did 10.7 nuke something from Canon that I have to re-install?

The issue seems to be that /Library/Quicktime had a lot of outdated Quicktime stuff. I noticed QT is now mostly in /System/Library/Quicktime, so I deleted everything in /Library/Quicktime and now it seems to work.

Final Cut Express doesn't support the canon 5d mark 2 Video files!?

At least not full support
http://seansense.net/2008/04/06/final-cut-express-40-1920x1080-vs-1440x1080
is Final Cut Express HD do support 1920x1080 30fps ?
What do you suggest I do/What choice have I?
Message was edited by: ariel26

this camera can play Both pal or NTSC = Depends on what i choose!
Need a third party case may be a little weird = the guy Knew I am a be-giner in editing - I'm not sure but I guess that He had to say Something about it -but he didn't...?
in fact i think he's got the Same camera = Same File - as set up at he's screen shot
http://files.macit.co.il/190218aforum01.jpg
but on any case, i copy this Details from dpreview - I hope it helps
Video*
Sizes • 1920 x 1080 (1080P)
• 640 x 480 (VGA)
• 30 fps
Audio 44.1kHz Mono (Internal Mic), 3.5mm external microphone jack
Format Quicktime MOV using H.264 codec, PCM codec for audio
File size 4.8 MBytes/sec (1080P), 2.2 MBytes/sec (VGA)
http://www.dpreview.com/reviews/canoneos5Dmarkii/page19.asp
Movie recording *
• Available optionally during Live view mode
• 1920 x 1080 (16:9) up to 12 mins (Quicktime 1080p H.264; 38.6 Mbits/sec)
• 640 x 480 (4:3) up to 24 mins (Quicktime 480p H.264; 17.3 Mbits/sec)
• Max file size 4 GB
• Quicktime MOV format (H.264 video, PCM sound)
• 30 fps
http://www.dpreview.com/reviews/canoneos5Dmarkii/page2.asp
_do you still think i need to go through the entire process whith the MPEG Streamclip as you Mention?_

Help need Convert SWF to AVI Video

Hi plz help
I have made presentation in flash cs4. I have one main file Index & loading rest all the files through LoadMovie.
I want to convert my presentation into AVI for video but when i export it in avi so it converts in AVI but its not taking the file which m loading externally & not even converting the movie clip.
so please help me i want to convert my presentation SWF files to AVI.
If anyone knows the free converter tool so plz tell me.
Thanx

I found a utility the other day that captures SWF playing.
My flash pieces were to complex to use the Export too.
Here's just one utility out there.
iWisoft Flash SWF to Video Converter

Help needed in playing HTML ' object ' videos with formats mov, avi, wmv...

Hi,
Here is where I am at this juncture...
I have a requirement wherein I need to render an HTML text containing an '<object>' tag which embeds a video, for example:-
<object width="320" height="240"
           data="javascript/media/ABC.wmv"
           type="application/x-mplayer2">
          <param name="url" value="javascript/media/ABC.wmv" />
</object>
Now I need to render this video into my Flex Web Application.
One way to do it, as I see, is somehow extract the 'data' attribute and put it as a 'source' for spark VideoPlayer.
Is there any better way to do this?
Also note that, I require to render all video formats (avi, mov, wmv etc.) and not just flv or f4v. Any pointers for this would be appreciated.
Thanks

Not so "easy share" after all is it?
Still Capture specs read as follows:
Still capture
Still format
JPEG/EXIF v2.21
Picture size
12.0 MP (4000 × 3000)—4:3
10.7 MP (4000 × 2664)—3:2
9.0 MP (4000 × 2256)—16:9
6.0 MP (2832 × 2128)—4:3
3.1 MP (2048 × 1536)—4:3
2.2 MP (1800 × 1200)—3:2
2.1 MP (1920 × 1080)—16:9
1.2 MP (1280 × 960)—4:3
Compression
JPEG/EXIF v2.21
Color modes
high color, natural color, low color, sepia, black and white
Sharpness
high, normal, low
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=11619&pq-locale=en_US
Question: Are these still images jpeg or Kodak's EXIF? or are you using the camera in HD movie mode where iMovie fails to recognize the file format/s?
If you read the system requirements for this device it clearly states X.3 or higher. However, I'm wondering if this also includes X.5.1 or not .....
Message was edited by: SDMacuser

Major Help Need With My I Pod Video

iF ANYONE CAN TELL ME HW TO FIX THESE PORBLEMS ON MY I POD ARE THE SMARTEST ALIVE FIRST MY SCREEN IS BROKE THATS OK MY I POD WAS WORKING BEFORE THIS HAPPEN BUT NOW IT CaNT EVEN STAY ON FOR NO LONGER THEN 10 SECONDS IT LOADS UP LIGHT SOMES ON THEN CLOCKS OUT AND I CANT TELL ANYONE WHATS ONE THE SCREEN BECAUSE IT IS BROKE SO IF ANYONE CAN HELP WITH THIS PROBLEM I WOULD LOVE IT THANK U

U NEED A NEW IPOD
IF UR SCREEN DOESNT WORK UR IPOD IS USELESS UNLESS U ONLY WANT TO USE IT FOR DISK USAGE

Help needed.. trying to display video to external TV

Hey guys,
I am trying to setup my T61P lappy to display video to my external TV via the VGA port. I was able to get the desktop background to display on the Samsung LCD tv but could not see anything else such as desktop items.
I set the laptop up using the fn-f7 option in presenter mode. Not sure what is going on here to not see info on my TV. was trying to watch a movie on the TV with no luck..
Thanks
T61P(6459-CTO) T9300 @ 2.5 GHz, 4g ram, Quadro FX 570M, Vista Bus. 64Bit, 160gig 7200 rpm HD, WSXGA disp.
Solved!
Go to Solution.

I have a new Lenovo T61, that my company bought me, i personally have a Toshiba laptop , that has an S-video output on it, i have to, on occasion, run powerpoint from it to a TV. Where it then comes out of the TV. And into a projector, for some of the shows that we do. My , or there Lenovo, only has the female VGA. Output for another monitor, but the driver that is in my Toshiba appears to be the same as in the Lenovo T61, so where can i get a VGA to S-video, or RCA. cable, and will this work for the: Intel Graphics media Accelerator, 6.14.10.4860. It runs XP in it,because of all the private, programs that we have were written for XP. Please help! I.T. Is always to busy, and only the top guy seems to know what he is doing, which means I just get someone who spends 4 hours, making calls to him, and then telling me, he will get back to me soon! HEEEEEEEEEElp! i'm not a real computer wizz, but i figured out how to do it on my Toshiba, so if i could find the cable i think i could get-r-done, I'm sick of using my computer, for there shows.
Message Edited by DaveUK on 01-10-2009 10:33 PM

Help needed with saving interactive PDF (Video and Youtube in InDesign)

Designing a brochure in Indesign CS6 I have placed small MP4 video file into indesign, when I save the file as an interactive pdf the video files dont show up in preview on mac, just a blank white space. the window does show in adobe reader but im having problems with the play function not being able to pause that. Would like the file to be a pdf so can share across a few devices and platforms.
Have also tried a workaround which hyperlinks an screencaption but the link appears broken when i click the image, is this something to do with you tube video being private?

Moved to InDesign forum.
When you export you will note that you export an Adobe PDF. There's a reason for that.
Mac Preview is fine for a plain vanilla PDF but it ends there.
Bob

Help needed with limiting views of video

Hello Board,
I'm using Keynote to make a slideshow showing the way my buisness works. I want to export the slideshow to quicktime/flash for others to view online but heres my problem:
I don't want this file floating around the web as a "DIY" video on how to fix a slate roof properly, I would like it to be "streamed" from my computer with my permition e.t.c. I emagine it being slightly like youtube in the way you can see how many times the videos been played and that you cant copy the video from the site. (I could put the video up on my .mac webpage)
Any advice on how to do this would be great, and I'm sorry if my question doesn't involve keynote that much!
Regards
Rob

The space a dedicated to the user.
Master table = address file
View = Address file by street nameI have no idea what any of the above means. Please explain.
How exactly are you creating the view?
(CREATE VIEW blah AS SELECT ...)
When view is queried a cpl days later view dows not exists.What's the exact error message?
When we goto the system to check the view, it is not there.What do you mean by "go into the system"?
View don't just vanish.
Did you check USER_VIEWS like I asked above?

Help needed! GMail sent items missing from Apple Mail!

I need your help to solve a problem that I've identified recently in Apple Mail with a GMail account:
I have a POP-enabled GMail account in Mail, but also with IMAP functionality enabled through GMail's webmail settings (probably because I access it also from my iPad).
However, I notice that my local "Sent" mailbox in Mail only contains some 140 messages, even if a visit to GMail's webmail page shows me that I have at least 1200 "sent" messages.
I must note that my advanced mailbox settings in Mail do NOT allow for automatic deletion of sent items.
So my question is: how to make sure that I do not lose ANY sent items from GMail or any other account for that matter (i.e., that whatever is sent remains in the local "sent" mailbox in Mail)? Am I missing something?
Thanks a lot in advance for your help.

Or am I saying something stupid?
No I don't think so. But from what you're saying, the only copies of sent messages on your computer will be what you are sending from the computer. The messages sent from the iPad or website are not stored on the computer. If it were all set as IMAP, they will be available on all devices.
Thanks a lot for your attentive reply - my only concern is that, when I activate IMAP, I won't be able anymore to have a steady copy of all items in my sent items folder on Apple Mail, nor to delete what I want at will.
Changing it to IMAP will make the all sent items available on the server to your computer, website, and other devices. They will always be there as long as you don't delete them from the server. The messages you manually delete will delete them from the server and all devices. If you want a local backup, then copy them to a local folder which will not remove them from the server or move them to a local folder which will delete them from the server.
Auto syncing does not in any way interfere with local folders on the Mac. The only IMAP folders you can sync are the inbox, sent, drafts, and junk. Inbox is the only mailbox that has to be synced (it's done automatically and you can't change it). I also sync the Sent and Trash. I don't sync (store messages on the server) the drafts or junk mailbox.
I don't understand what you mean by not being able to delete messages from the Inbox. I do it all the time. What happens when you delete it depends on your settings in gmail. Gmail has some peculiar settings like having a deleted items folder besides the Trash folder. The default is to delete from inbox, it goes to the deleted items folder. Delete it from there, and it goes to Trash. Delete it from trash to get rid of it. The fact is that the All Mail folder shows the message no matter what folder it in. I have mine set to move it straight to the trash when moved from the last visible IMAP folder. So, when I delete it from Mail's Inbox, it moves it to the trash just as local messages do.
If you plan to do your email from the computer only, then POP is fine. If you plan to use the website and iPad also, then IMAP is the way to go.
That way everything in mail is available no matter where you look at it. The only things you won't see is what you move to local folders.
Seems like you should go to gmail's website and read the help files to become more familiar with it. Also look at all the settings available (expecially the Labels Tab, Accounts tab, and Forwarding Tab. These settings will be what you will use mostly to customize how it works and flows with the Mac. If you're going to use IMAP, you need to understand what they do exactly and what you want them to do for you.
My sole objective: to keep ALL messages in Apple Mail (except those I expressly delete), as well as ALL messages in Google.
IMAP does exactly this for you already. By leaving it on the server, they are on the computer. In Mails preference settings in the Accounts / Advanced Tab, for IMAP accounts keep the setting for storing messages for offline viewing. That way Mail actually does store a copy locally until you delete it from the server. And that will be backed up with your computer backup.
And what you do delete from any device will duplicate it elsewhere.

HT4623 iphone 3 restore help needed asap

Hi,
See below print screem of problem I am having, iphone 3 is in restore mode and i have trird everything I have been advised to.
\error 6025
2012-09-27 22:36:11.015 [1012:120c]: restore library built Aug 11 2012 at 16:32:14
2012-09-27 22:36:11.015 [1012:120c]: iTunes: iTunes 10.7.0.21
2012-09-27 22:36:11.015 [1012:120c]: iTunes: Software payload version: 8C148
2012-09-27 22:36:55.604 [1012:aec]: iTunes: Specifying UOI boot image
2012-09-27 22:36:55.610 [1012:aec]: requested restore behavior: Erase
2012-09-27 22:36:55.611 [1012:aec]: requested variant: Erase
2012-09-27 22:36:55.625 [1012:aec]: *** UUID 6729FE47-231E-B74A-B26A-EE2F3B282E46 ***
2012-09-27 22:36:55.667 [1012:aec]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
2012-09-27 22:36:55.668 [1012:aec]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreLogo" Digest = "<CFData 06D3B9F0 [71048078]>{length = 20, capacity = 20, bytes = 0x9eba4b1152ef0493161c31d5cade4ae26ec4d01b}"
2012-09-27 22:36:55.668 [1012:aec]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreDeviceTree" Digest = "<CFData 06D40E78 [71048078]>{length = 20, capacity = 20, bytes = 0xe1c1d64ae4a66c446fe5a2ea91a8de3462a9cbf3}"
2012-09-27 22:36:55.669 [1012:aec]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreKernelCache" Digest = "<CFData 06D3C698 [71048078]>{length = 20, capacity = 20, bytes = 0xffe4fd533832ec121bf356ca1143e360972d4190}"
2012-09-27 22:36:55.669 [1012:aec]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreRamDisk" Digest = "<CFData 06D3EFB0 [71048078]>{length = 20, capacity = 20, bytes = 0x7b7645b89389219cfb4de5257fec59b67237d8aa}"
2012-09-27 22:36:55.703 [1012:aec]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "KernelCache" Digest = "<CFData 06D3DA98 [71048078]>{length = 20, capacity = 20, bytes = 0xffe4fd533832ec121bf356ca1143e360972d4190}"
2012-09-27 22:36:55.704 [1012:aec]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow1" Digest = "<CFData 06D430D8 [71048078]>{length = 20, capacity = 20, bytes = 0x8be30a8b298e36866e05eee57538430dc60af012}"
2012-09-27 22:36:55.705 [1012:aec]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow0" Digest = "<CFData 06D3C648 [71048078]>{length = 20, capacity = 20, bytes = 0x7c27972b0539fbdacfed19f6cbf3bba92eaa4f13}"
2012-09-27 22:36:55.716 [1012:aec]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBoot" Digest = "<CFData 06D3F4B0 [71048078]>{length = 20, capacity = 20, bytes = 0x67814c9641a3a8c28fa800b6c3f753590aed60db}"
2012-09-27 22:36:55.716 [1012:aec]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "DeviceTree" Digest = "<CFData 06D39B28 [71048078]>{length = 20, capacity = 20, bytes = 0xe1c1d64ae4a66c446fe5a2ea91a8de3462a9cbf3}"
2012-09-27 22:36:55.717 [1012:aec]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging1" Digest = "<CFData 06D3CE40 [71048078]>{length = 20, capacity = 20, bytes = 0xa622ccd2cbc8406da1757d19212cacc6f856eb4d}"
2012-09-27 22:36:55.717 [1012:aec]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging" Digest = "<CFData 06D3DA20 [71048078]>{length = 20, capacity = 20, bytes = 0x8ae3e48d62cd8a83287c8133a195637c908458b2}"
2012-09-27 22:36:55.717 [1012:aec]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "AppleLogo" Digest = "<CFData 06D41E68 [71048078]>{length = 20, capacity = 20, bytes = 0x9eba4b1152ef0493161c31d5cade4ae26ec4d01b}"
2012-09-27 22:36:55.718 [1012:aec]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryPlugin" Digest = "<CFData 06D3AAC8 [71048078]>{length = 20, capacity = 20, bytes = 0xea5805db544407d49475a4584e6c3af3bc97cd0f}"
2012-09-27 22:36:55.718 [1012:aec]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryFull" Digest = "<CFData 06D42700 [71048078]>{length = 20, capacity = 20, bytes = 0x50dd3114f4b9a3bb9c18589bfc5a300e35335f5f}"
2012-09-27 22:36:55.718 [1012:aec]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging0" Digest = "<CFData 06D42278 [71048078]>{length = 20, capacity = 20, bytes = 0x64c7eb75bfdf1c0ff50ff17851c37918316eeed8}"
2012-09-27 22:36:55.719 [1012:aec]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RecoveryMode" Digest = "<CFData 06D406D0 [71048078]>{length = 20, capacity = 20, bytes = 0xa21af5e198d8dccd00bea4bfa47b26c771a0716b}"
2012-09-27 22:36:55.719 [1012:aec]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: using UniqueBuildID <CFData 06D3D728 [71048078]>{length = 20, capacity = 20, bytes = 0x4a515ecc484322448d261b13499bfb4002f66b96}
2012-09-27 22:36:55.721 [1012:aec]: amai: AMAuthInstallRequestSendSync: SSO function returned NULL, SSO disabled.
2012-09-27 22:36:55.812 [1012:aec]: amai: tss_submit_job: HttpQueryInfo returned 200
2012-09-27 22:36:55.823 [1012:aec]: amai: AMAuthInstallRequestSendSync: received tss response (server version: 0.6.30-b2)
2012-09-27 22:36:56.280 [1012:1580]: iBoot build-version = iBoot-931.71.16
2012-09-27 22:36:56.281 [1012:1580]: iBoot build-style = RELEASE
2012-09-27 22:36:56.298 [1012:1580]: unable to open device_map.txt: No such file or directory
2012-09-27 22:36:56.300 [1012:1580]: found device map entry for 0x00008900 0x00000004. boardConfig=n82ap platform=s5l8900x
2012-09-27 22:36:56.301 [1012:1580]: _AMRestoreCreateCFDataWithContentsOfFile: CreateFileA failed: 2
2012-09-27 22:36:56.301 [1012:1580]: unable to create data from file: 17
2012-09-27 22:36:56.301 [1012:1580]: device_map.plist file not found
2012-09-27 22:36:56.302 [1012:1580]: AMDeviceIoControl: GetOverlappedResult failed
Can anyone help, i have tried all youtube videos, all apple advice, I am at a loss
Thanks
Sam

unfortunately if its not working you need a update from apple or a update from the manufacturer there has been a lot of complaints about car stereos not working with the iPhone 4 and it def has something to do with the software that apple is shipping there is no magic application or magic setting that is going to change this sorry

Help needed: Canon 5D Mark II video to Apple TV conversion

Similar Messages

Maybe you are looking for