Help needed, cant connect to the pc suite

i have a problem in connecting my phone to the pc suite. it says no connection types, n it tells me to reinstall the pc suite, however, ive done it a several times n still cant solve the prob. does anyone know the solution to my problem here? id be very grateful if someone would come up with the solution, im at a loss what to do. thanx all.

my phones are nokia 9300i, 6275i, 6280 and 6120 classic. at first i used the pc suite that came with the package of the 9300, n it worked well, but when i updated the pc suite by downloading from nokia's site, something wrong happened, i couldnt connect my phone because no available connection was found. n lately i tried uninstalling the pc suite n i installed the one that came with the nokia 6120 classic, but still its useless. my windows is windows xp.

Similar Messages

  • I cant connect to the itunes store and the support team didnt really help anyone facing this issue with ipad mini!!! I need help

    I cant connect to the itunes store and the support team didnt really help anyone facing this issue with ipad mini!!! I need help

    Here's the troubleshooter.
    Can't connect to the iTunes Store

  • I just bought an airport express. i set it up and was able to be detected by my macbook, but i still cant connect wirelessly. the same goes when i tried my iphone. please help!

    i just bought an airport express. i set it up and was able to be detected by my macbook, but i still cant connect wirelessly. the same goes when i tried my iphone. please help!

    Is the status light green?
    Your Airport device may be in Bridge Mode.
    Airport Utility 6:
    Open Airport Utility, select the Airport Express and click Edit. Navigate to the Network tab and change Router Mode to DHCP and NAT. Then click Update on the bottom right.
    Airport Utility 5:
    Open Airport Utility and click Manual Setup. Navigate to the Internet icon and change Connection Sharing to Share a Public IP Address. Then click Update on the bottom right.

  • HT4993 Everytime i plug my phone into itunes it says it cant connect because the phone is locked well i restored my phone twice and set a new passcode the last time and it still wont work . I even deleted itunes and reinstalled it , it dosent work . HELP

    Everytime i plug my phone into itunes it says it cant connect because the phone is locked well i restored my phone twice and set a new passcode the last time and it still wont work . I even deleted itunes and reinstalled it , it dosent work . HELP PLZ !!

    I had the same issue. I tried everything unchecking / rechecking, formatting Iphone and restoring from backup etc etc.
    In the end it was a simple issue which might of might not help you.
    A number of months ago I relocated by Itunes folder to a NAS drive. It appears when I did the last I tunes update Itunes set the destination path of the Itunes media to the default location, the result was Itunes couldn't install music,apps, video until I set the correct destination path.
    The bit that confused me was it was transferring some media. This was of course the media I had downloaded since the last Itunes update which had gone to the default location.
    I hope that makes sense and is off some help.

  • TS3297 Error message: 'Cant connect to the itunes store. An unknown error occured (-3212) please check you have an active internet connection and try again'. Help !

    Can someone help me please ? I was using itunes (downloading albums etc) just half an hour ago. I had a pop up asking me if i'd like to download the latest version of itunes, which i accepted. When the update had finshed downloading, i then restarted my computer, as i usually would. Tried to re access the itunes store, and received the following error message: 'Cant connect to the itunes store. An unknown error occurred (-3212) please check you have an active internet connection and try again.
    Needless to say, i have an active internet connection and cant see any reason why this would be happening, it has never happened before ?
    Any help would be appreciated.

    Do you have PeerBlock installed/    >  TS3297 Error message: 'Cant connect to the itunes store.

  • Can someone please help i cant connect to itunes from my iphone 4 ,,i had an iphone 3 and when i got my iphone 4 i changed my email address for new itunes account and my old phone which hubby uses

    Can someone please help i cant connect to itunes from my iphone 4 ,,i had an iphone 3 and when i got my iphone 4 i changed my email address for new itunes account and my old phone which hubby uses is changed aswell ..for some reason i cant update my apps off m iphone & in itunes via pc it will say apps are all up to date but i have 25 apps that need updating please can someone help ,, i can download a new app but i cant update existing ones ,,,
    very frustrated iphone user !!

    Changing devices is no reason to create a new Apple ID.
    All content purchased from iTunes is permanently linked to the Apple ID it was purchased with.
    To update apps purchased with the old ID, you MUST sign in with that Apple ID.

  • HT204400 no matter what i try,  my apple tv says it cant connect to the network and it gives me error -3906.  i have tried restart and reset, wifi, ethernet same error. all other devices work fine.

    My apple TV has been working fine. Now it gives me error -3906 and says it cant connect to the network. it wont accept the password for my wifi.  I have tried to restart and restore both the apple tv and my modem.  still the same issue and same error message.  any ideas?

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • 6.18 Cant connect to the internet now

    Tried logging into skype after the new update and it says i need to connect to the internet. Well clearly i am on the internet! I reinstalled and still the same problem..and i tried to connect via my phone and now i am getting the same thing. I rebooted the internet just in case and also did not solve my problem.

    evduc wrote:
    i got the same problem. did you find a solution?
    What exactly is the version of Skype installed on your computer? In Skype go to Help -> About Skype.

  • Cant connect to the internet using my wrt54g

    i bought the linksys wrt54g yesterday brought it home put in the setup disk and everythin was goin good until it came to step 10 and an error message came up saying: cant connect to the internet please shut off modem and turn it back on so tryed that still didnt work. so i found a thread when i searched this problem that said i had to bridge my westell 6100 modem to the router or somthin like that so i followed those steps and it still doesnt work can som1 help me please!?

    Did you try to change the routers Ip address to 192.168.2.1?
    I am not sure of that modem and not sure if it has a built in router ot not.  Call your ISP and see if that modem is also a router running DHCP and everything else.
    Richard Aichner (Ikester)

  • Help needed in Connecting to SAP From Eclipse

    Hi All,
    Currently, we have a requirement where we need to retrieve data from SAP System and need to upload the same in a Third Party Application (Java based system).
    We are able to create an account in Java Application using Eclipse IDE by hard coding the Account details. We are stuck up in establishing the SAP connection and retrieving the details and then creating the extracted account details in Java application from Eclipse.
    Any pointers on this will be of great help.
    Regards,
    Eureka

    Hi Eureka,
    Please refrain from creating cross-posts in parallel forums, moreover this question is JCo-related and is not directly connected with Java EE 5. The Help needed in Connecting to SAP From Eclipse in the Java Programming forum would be enough. Please continue the discussion there.
    Regards,
    Vladimir

  • When i plug my phone into itunes for the ios update, it downloads but then says it cant connect to the server. How do i get my update?

    When i plug my phone into itunes for the ios update, it downloads but then says it cant connect to the server. How do i get my update?

    Here are Apple Steps for Error 21:
    This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
    My additional advice:
    Also Error 21 can occur with DFU Mode Restore, try Recovery Mode Restore. Restart computer. Open iTunes on computer. Connect iPhone to computer. Hold both home and power buttons until iTunes recognizes iPhone in Recovery Mode. This usually takes about 20 seconds of holding both buttons. Click Restore button of iTunes.

  • I bought my iphone 5 in the USA but am living in the UK. When I was trying to download apps, it said i need to connect to the uk apple store, how do i do that?

    I bought my iphone 5 in the USA but am living in the UK. When I was trying to download apps, it said i need to connect to the uk apple store, how do i do that?

    Settings > iTunes & App Stores
    Tap on your Apple ID at the top
    Tap "View Apple ID"
    Enter password if needed
    Tap "Country/Region"
    Tap "Change Country or Region"
    You may need to change to a UK credit card.

  • I have a hard drive for CD storage that needs to connect to the Ethernet router. sInce my router is not in this room, and in another room, I want to use my Mac as a router for the drive, and share the wifi. Ho do I do this

    I have a hard drive for CD storage that needs to connect to the Ethernet router. sInce my router is not in this room, and in another room, I want to use my Mac as a router for the drive, and share the wifi. Ho do I do this? I gace tried the System Preferences -> Sharing, shared internet to Ethernet, but can't se ethe device on Finder

    Djembe wrote:
    UEFI (unified extensible firmware interface) boot requires Global unique identifier Partition Table (GPT) as opposed to the older Master Boot Record (MBR). If your existing drive is formatted in MBR, you will need to adjust BIOS settings to enable legacy boot in order for it to work properly.
    Is there a performance difference between GPT and MBR? If GPT is better, I do not mind formatting the drive with it.
    5. No special drivers are needed.
    Thanks. What about the thunderbolt port?
    7. I think Lenovo estimates 6 hours.
    Lenovo says 6 hours with the 6-cell battery on its website.
    BrendaEM wrote:
    Hi,
    There was a serious BIOS/UEFI problem with that SSD . Perhaps this thread will save you some headaches. Someone is recomending shutting off Rapid Boot in the setup, which would probable mean little with a SSD, anyway.
    I read through this, and it looks like the problem was fixed in a BIOS update, which I plan to do. However, it also seems like Intel Rapid Start is not even worth it in the first place, as sleep consumes almost no power at all.
    W540: i7-4700mq, K2100m, 8 GB DDR3L, 512 GB SSD
    T510: i7-620m, NVS 3100m, 8 GB DDR3, 512 GB SSD

  • HT1338 I have clicked in the App Store icon and when I have attempted to download there is an error message. Saying I need to connect to the UK store, not the US store, how do I do this?

    I have clicked in the App Store icon and when I have attempted to download there is an error message. Saying I need to connect to the UK store, not the US store, how do I do this?

    Switching an iTunes Store account to a different country
    http://www.ilounge.com/index.php/articles/comments/switching-an-itunes-store-acc ount-to-a-different-country/
     Cheers, Tom

  • I cant connect to the itunes store from my ipad

    i cant connect to the itunes store in my ipad even the two movies that i rent before 4 days didnt download

    Try logging out of your account on the iPad by tapping on your id in Settings > Store and then log back in and see if the two stores then work.

Maybe you are looking for

  • A problem about IDOC Receiver

    Hi, everybody. This time, I'm developing a IDOC Receiver though the SAPIDocReceiver class. With the dotnet Connector manual from SAP, the receiver side on dotnet is easy to develop. But how to configure the SAP R/3 to send IDOC to the dotnet side, I

  • How to create a navibar and gear(spinner) programatically in cocoa view app

    Hi All, How to create a navigation bar and gear(spinner) programmatic ally in cocoa view based application. In navigation bar just i need to display Application Title.

  • Error has occurred in workflow processing

    Hi All, The email notification sent back to employees to notify them that the timecard was submitted successfully is erroring. I looked in the workflow administrator resp and noticed the employee notifications were failing. Please see the below error

  • Ship to party entry in KNVP

    Hi I have created a ship to party. This does not have partner functions tab page in sales area data. Also the ship to party account group is not configured to accept the partner functions. casually i checked the KNVP table for this ship to party, sys

  • Accuracy in writing to file

    When data is written to a text file it appears to have 7 figure accuracy.  Is it possible to increase this?  If a binary file is used instead how much accuracy does this keep? Sorry if this obvious but I'm a newbie to LabVIEW.