Help Needed Configuring Post Set Up For Big Indie Feature:

We’ve got incredible performances from an amazing cast of well-known character actors from film, TV and stage, a unique and inspiring script, and some truly beautiful, cinematic footage. And now — it’s all about putting it together…
But I’m having trouble finding an accurate, effective and (most importantly) a DETAILED workflow accommodating the latest version of Premiere, to post a LENGHTY feature film shot on the RED Epic in 5k FF. I’ve reviewed videos here, but in conducting edit tests, I'm encountering all manner of glitches and problems, and need to ensure that I am properly configuring our post workflow and all of the associated hardware.
I’ll be dividing the film into project file “reels” to help keep things manageable. As editor and DP, it's also most important for me to edit on a 4k timeline (to take advantage of reframing and stabilization of the 5k). Footage is on three Pegasus II RAIDS.
There will be a LOT of FX work done outside of Premiere in AE (and other compositing and graphics programs). I’m planning to finish in Resolve, outputting at 4k.
I have the new Mac Pro with:
- 2.7GHz 12-core Intel Xeon E5 with 30MB of L3 cache
- 64GB (4x16GB) of 1866MHz DDR3 ECC - 4X16GB
- 1TB PCIe-based flash storage
- Dual AMD FirePro D700 GPUs with 6GB of GDDR5 VRAM each
A Sonnet Echo Express III Desktop 3-Slot (with Thunderbolt upgrade) housing the following:
- Red Rocket
- Connection card for HP LTO5 Ultrium 3000 Sas Ext Tape Drive
If needed, I’m open to acquiring other cards or hardware, too (possibly adding the Red Rocket-X to the mix). And if the referral of a PAID individual with firsthand knowledge of such a setup – to at least help with the initial set up and configuration – is what I need, I’m open to that, as well.
We truly have an amazingly powerful compilation of principal photography, and a great story to tell — I just need to overcome this major hurdle of setting up our post. As a somewhat newbie to Premiere, I greatly appreciate any advice, pointing-me-in-the-right-direction, or suggestions of individuals to help oversee this for compensation and screen credit that anyone can offer me here...
Many Thanks,
Bill

Oooh...big involved questions and many of them.
If it helps..
A few things I know I would do before even starting on the actual film edit
..is give the new system a massive shakedown.
Thrash the hardware and software with test footage , graphics and audio etc.
Test the pipelines and workflows.
Set up a BACKUP routine. DO NOT RELY ON AUTOSAVES
Would NOT do O.S updates once started with a stable system.
Me...I would not use a Dynamic Link workflow for FX. (I would use D.Is)
Would create a flow chart plan for the edit and post prod to avoid generation losses, efficiencies and scheduling.
Work toward lock downs before FX , audio, CC and Grade. (Avoid the trap of being creatively impatient for the benefit of a smooth edit experience)
Sort this first...
I'm encountering all manner of glitches and problems, and need to ensure that I am properly configuring our post workflow and all of the associated hardware.
You might want to specify some of this stuff and see if you get answers here or elsewhere..
Suggestion - can you wait for next version of PPro ? - coming very soon evidently. Start with latest version so you don't need to update midstream. A feature takes a long time to post and some cool new features may help. eg Master Clip enhanced.
Have you considered Prelude in the workflow to log and set up your project. ( Never used it myself but I would consider/investigate it for long form)
Good luck and enjoy the edit process.

Similar Messages

Help needed configuring Tomcat 4.1

Hi there,
I hope that someone can help me out with this problem!!
I am having problems running my applications on Tomcat 4.1 (on Win XP, j2sdk1.4.1, j2sdkee1.4) each time i try to run a JSP page that uses JavaBeans i get an 'unable to compile class for JSP' error. I am guessing that tomcat is unable to recognise my JavaBean package (which is stored in the normal place, under WEB-INF/classes)
Now, I know that i have my environment variables set up correctly, as the example jsps packaged with tomcat work fine.
From reading previous posts i guess that the problem is my Tomcat configuration, probably server.xml. So, my question is: do i have to configure server.xml manually for each application that i set up? If so, how do i do this? If not, does anyone have any ideas as to what the problem, may be?
Many thanks in advance for your help!!

It sounds like you may need to add the bean to your classpath so that the compiler can find it. The classpath's function is simply to let the compiler know where your classes are located.

Help needed in Finding Download location for Sun One Portal 7

Hi,
help needed for finding download location for Sun ONE Portal 7. I tried to find in Oracle Download page ,
http://www.oracle.com/us/sun/sun-products-map-075562.html, But unable to find.
Please share the link for download location.
I am totally new in Sun ONE Portal.
Thanks,
Edited by: 945439 on Oct 5, 2012 3:41 AM

try edelivery.oracle.com under sun products.

HELP: need to do version comparison for large no.of programs

i need to do version comparison for a large set of programs(approx.4000).anybody has any technique to do it fast,plz lemme knw.

Hi
try using this FM
/SDF/CMO_COMP_VERSION
AKB_VERSION_COMPARE
Regards
Shiva

Help needed on online theme creation for mobile phones

Hello everybody,
I want to create an web application which will create themes for different mobile phones. In that application end user can upload jpg/gif images of there choice and select the mobile phone make like Nokia and also the model number like 6030. After that they can create their desired theme by clicking on a button and also can download it.
My main problem is how to convert an image into a mobile phone theme (*.thm or *.nth or *.sis).
Can anybody give any suggestion on this matter?
Thanks in advance.
Tanmoy

Hi everybody,
My main problem is how to convert an image into a mobile phone theme (*.thm or *.nth or *.sis).
Please give me any guideline that I can proceed.
Help needed.
Thanks in advance.
Tanmoy

Need to call SET ROLE for Oracle before running report

Hi all,
does anyone know how I can call SET ROLE for Oracle with Crystal Reports, before running report? I'm using Crystal Reports 2008 to design report (with Server Oracle connection) and Java Reporting Component to run report within a J2EE apllication. If anyone has any idea, I'd greatly appreciate as I'm in trouble.
Thanks a lot.

Just a thought...
If your report's datasource was an Oracle stored procedure, you could call a function to set the role from that SP
You would be in the same Oracle session from Report --> SP --> Function, so the role would be retained

MOVED: Needed Help Identifying and Properly Setting Voltages for OC Environment

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=136075.0

With the CPU V. taken out of Auto, no point in bothering to enable any power saving features, they are essentially out the window. IOH and PCH probably don't need to be changed out of Auto. Spread Spectrum should be left disabled all the time. 87C is getting on the hot side, but nothing wrong with it in the 70C's.
Yup, you are right. Too much variation in Intel CPU's to give cut and dried voltages required. DRAM V. may need increasing to maintain stability with the IMC. QPI V. often needs an increase. Once the CPU is stable, then the RAM can be tweaked using the DRAM Ratio. Trial and error as to speed and timings most likely will be required along with the voltages to make it stable.

Help! Cannot Re-set Email For BB Torch 9800!!!

Dear BB Support, I had to do a Security Wipe on my BB 9800 and now I cannot re-set all my email accounts. I don't use a Corporate Email Server and when I do try and set up my emails the answer I get is Problem With Network Server Try Again.I have no idea what to do. Help please.
<removed>@yahoo.com
EDIT: Personal Information such as e-mail is prohibited for your security. Please review User Guidelines under section "Be careful."

Hello...and apologies for the delayed reply!!
Hopefully you have already resolved this, but just in case...
I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Delete and Resend Service Books
KB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
If you have no CMIME entry, then skip the deletion
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Batt Pull Reboot
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should try deleting and re-adding your BIS configuration for the affected email accounts. Otherwise, you should contact your mobile service provider for formal support.
Lastly, as to your opening ("Dear BB Support")...please understand that this site has nothing to do with any formal support at all. Rather, this is a user-to-user community of volunteers. Formal support is contractually limited to being provided by your mobile service provider, who can escalate into RIM as needed.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Please help me configure a new 8core for FCP

PLEASE HELP A PC GUY MOVE OVER...
I need to configure a new 8-core for FCP mainly. I need to keep the expense reasonable so dont want to spend extra $$$ if i dont have to.
I edit files from many different camera's these days. Mostly weddings & demos.
I want to go with an 8 core either Two 2.26GHz, OR 2.66GHz? Is the 2.2 fast enough with FCP?
How much ram do i need?
Do I need to stripe 2 sata drives together for the video?
Which video card?
Can you recommend any other software/hardware that will help me?
Here is a link to apples spec page:
http://www.apple.com/macpro/specs.html
THANKS

sarecco wrote:
PLEASE HELP A PC GUY MOVE OVER...
Welcome to the family. if you are not familiar with the Macintosh operating system, get yourself a book.
sarecco wrote:
I want to go with an 8 core either Two 2.26GHz, OR 2.66GHz? Is the 2.2 fast enough with FCP?
Either will work fine.
sarecco wrote:
How much ram do i need?
As much as you want but 8G will be adequate. More might not help significantly.
sarecco wrote:
Do I need to stripe 2 sata drives together for the video?
Depends on the video you're trying to use or if you want to do 9 camera multiclips. Maybe.
sarecco wrote:
Which video card?
The stock 4870 is the gold standard for Motion; the current rev of FCP does not care much about the GPU but we are hoping future revs will use the card directly.
sarecco wrote:
Can you recommend any other software/hardware that will help me?
Umm, withotu knowing what you need to do, of course not.
sarecco wrote:
THANKS
No sweat, ignore those other guys. We see this post about once a week around here so you can easily research it on the forum. Strongly urge you to locate your local Macintosh user group.
bogiesan

Help needed, double post-submit on Oracle 9iAS ?

Hi,
I am working on a project where we make use of Oracle Application Server 9.0.3 in combination with OC4J and struts. During development we have made use of JDeveloper 9.0.3 and its integrated server for testing the application. Unfortunately we have been waiting too long with deploying the app on the 'real' (Oracle IAS) server, and now we found out that when deploying the application on IAS, some parts of our application do not seem to work anymore.
After a little investigation we found out that all POST submits of our forms seem to be submitted twice.
Since we did some Javascript-evaluation before submitting, we first thought that that the problem was client-side, but after adding code to make sure that the submit will only occur once (flag set to 1 before submit, and only submit when flag = 0 etc..), the problem still persists...so the submit does not come from our document.formx.submit() command...
Let me restate that this double posting does not occur within the JDeveloper-test-environment using the same browser.
Now convinced that the problem was server-side, we thought we could focus on this side. Unfortunately, after an occasional test with a Mozilla-browser (our default (customer) browser is IE6), the problem did NOT occur !
So, to sum things up :
- Javascript does not submit twice
- On the server, the logging indicates a double post-action
- On client-side, only a single-post is allowed...
- mozilla does not seem to cause problems, while IE6 does.
- JDeveloper runtime environment does not expose the problem (with either browser, it goes smooth), while deploying on the IAS 9.0.3 server does...
Can anyone shed some light on this ? We've been looking into it for a day already, and need to get it fixed asap (as always ;o))...
Thanks for any info,
Bas van Driel

This sounds like a strange java problem not IAS
From the sun site
"When I try to open a file through my Java Web Start application, a message box pops up with the title "javaw.exe - No Disk". Why does this happen?
This is a bug in the Java 2 SDK v1.2.2 or v1.3 . This bug will be fixed in a future Java 2 SDK release. In the meantime, there are a couple workarounds: "
Id be very tempted to remove any JDK/JRE installations, or even better start with a clean machine.
Hope this helps.

Computer keeps Configuring and setting up for first time use

I have a toshiba A505-S6980 that has been working fine for a couple years. Recently I had performance issues and suspected virus, spyware so I did a recovery with the original discs I made when I first got the computer. Four of the six discs reloaded fine. It did not ask for the last two discs "Environment 64 bit and Applications and Drives. I also have a System Repair disc. After loading the four recovery discs the computer now keeps recycling between preparing for first time use, configuring system, reboot and then back to preparing for first time use,etc. I think I'm close to getting this, but need a last bit of help.
Thanks

It's been a couple days since you posted this problem. Did you get anywhere, or are you still stuck in that loop? If it's still stuck, you may just want to perform the recovery again.
- Peter

Help needed: making a psptoolchain package for arch

Hi....
I'm very new to archlinux (now using it for 3 weeks), but I really like it
Now I tried to make a archlinux package for the psptoolchain (PSP's are so nice )
I already got a working package for the psp-gcc and the psp-binutils (wrote my own PKGBUILD's) which came with the psptoolchain.
But now I got stuck with psp-newlib and pspsdk.
At the moment I'm building all the packages separately, but later I'll try to make one package for the whole psptoolchain....
So here comes my problem with psp-newlib and pspsdk...
psp-gcc -march=i686 -O2 -pipe -G0 -Wall -I../../src/base -I../../src/kernel -c sceAtrac3plus.S
sceAtrac3plus.S:0: error: bad value (i686) for -march
Assembler messages:
Error: Bad value (i686) for -march
make[3]: *** [sceAtrac3plus.o] Error 1
make[3]: Leaving directory `/mnt/data/archlinux/packages/psptoolchain/pspsdk/src/pspsdk/src/atrac3'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/mnt/data/archlinux/packages/psptoolchain/pspsdk/src/pspsdk/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/mnt/data/archlinux/packages/psptoolchain/pspsdk/src/pspsdk'
make: *** [all] Error 2
==> ERROR: Build Failed. Aborting...
And here comes my PKGBUILD for psp-newlib:
# Contributor: [email protected]
pkgname=newlib
pkgver=1.13.0
pkgrel=1
pkgdesc="GCC for psp-devel"
url="http://ps2dev.org/psp/Tools/Toolchain/"
depends=()
makedepends=()
source=(ftp://sources.redhat.com/pub/newlib/$pkgname-$pkgver.tar.gz)
md5sums=('3d07cc367a22b78c44227456b0d3b7dc')
build() {
export PSPDEV="/usr/local/pspdev"
export PATH="$PATH:$PSPDEV/bin"
cp $startdir/newlib-1.13.0.patch /$startdir/src/$pkgname-$pkgver
cd $startdir/src/$pkgname-$pkgver
cat newlib-1.13.0.patch | patch -p1
cd /$startdir/src/$pkgname-$pkgver
BUILDDIR="/tmp/pspdev" PSPDEV="/usr/local/pspdev" ./configure --prefix=/usr/local/pspdev --target=psp
make || return 1
make DESTDIR=$startdir/pkg install
I know, using newlib as pkgname is bad, but later I'll change it to psp-newlib and I'll replace the $pkgname's with newlib (I hope this idea isn't too bad)
One last thing: psp-binutils and psp-gcc are installed in "/usr/local/pspdev"
I hope you can help me
thanks, and have a nice day
XazZ

After a long break I decided to work on the PKGBUILD again.
Now I got two PKGBUILD's: one for the psptoolchain and one for pspsdk (pspsdk gets updated very often, so I decided to create an extra PKGBUILD).
I'm not sure if my PKGBUILD's fit the PKGBUILD-standard
First thing before I post my PKGBUILD's: I'm not finished with adding all required fields (as license and so on)!
Here comes the one for psptoolchain:
pkgname=psptoolchain
pkgver=2211
pkgrel=1
pkgdesc="A collection of tools to create executables for the Sony PSP"
url="http://ps2dev.org/psp/Tools/Toolchain/"
depends=('subversion' 'texinfo')
makedepends=()
license=('GPL')
source=(ftp://ftp.gnu.org/pub/gnu/binutils/binutils-2.16.1.tar.bz2 ftp://ftp.gnu.org/pub/gnu/gcc/gcc-4.0.2/gcc-4.0.2.tar.bz2 ftp://sources.redhat.com/pub/newlib/newlib-1.15.0.tar.gz)
md5sums=('6a9d529efb285071dad10e1f3d2b2967'
'a659b8388cac9db2b13e056e574ceeb0'
'4020004b1b7a56ca4cf7f6d35b40a4cb')
sha1sums=('5c80fd5657da47efc16a63fdd93ef7395319fbbf'
'f1b714c6398393d8f7f4ad5be933b462a95b075d'
'f6860b36e48fb831a30bab491230bbc7ce2669a2')
arch=('i686')
_svntrunk=svn://svn.pspdev.org/psp/trunk/psptoolchain
_svnmod=psptoolchain
_svntrunk1=svn://svn.pspdev.org/psp/trunk/pspsdk
_svnmod1=pspsdk
build() {
cd $startdir/src
svn co $_svntrunk $_svnmod
cd psptoolchain
cp binutils-2.16.1.patch $startdir/src/binutils-2.16.1/
cp gcc-4.0.2.patch $startdir/src/gcc-4.0.2/
cp newlib-1.15.0.patch $startdir/src/newlib-1.15.0
export PSPDEV="$startdir/pkg/usr/local/pspdev"
export PATH="$PATH:$PSPDEV/bin"
msg "patching and building binutils..."
cd $startdir/src/binutils-2.16.1
cat binutils-2.16.1.patch | patch -p1
./configure --prefix=/usr/local/pspdev --target=psp --enable-install-libbfd
make clean || return 1
make || return 1
make DESTDIR=$startdir/pkg install
msg "building and patching binutils finished"
msg ""
msg "patching and building gcc..."
cd $startdir/src/gcc-4.0.2
cat gcc-4.0.2.patch | patch -p1
mkdir objdir
cd $startdir/src/gcc-4.0.2/objdir
../configure --prefix=$startdir/pkg/usr/local/pspdev --target=psp --enable-languages="c" --with-newlib --without-headers
make || return 1
make DESTDIR=/ install
msg "building and patching gcc finished"
msg ""
msg "building pspsdk-headers - we'll only need them temporary"
cd $startdir/src/
svn co $_svntrunk1 $_svnmod1
cd $_svnmod1/
./bootstrap
./configure --prefix=/usr/local/pspdev -with-pspdev=/usr/local/pspdev
make clean || return 1
make DESTDIR=$startdir/pkg install-data
msg "building pspsdk-headers finished"
msg ""
msg "patching and building newlib-psp"
cd $startdir/src/newlib-1.15.0
cat newlib-1.15.0.patch | patch -p1
./configure --prefix=$startdir/pkg/usr/local/pspdev --target=psp
make || return 1
make DESTDIR=/ install
msg "building newlib-psp finished"
msg ""
msg "building gcc-c++"
cd $startdir/src/gcc-4.0.2
mkdir build-psp-c++
cd $startdir/src/gcc-4.0.2/build-psp-c++
../configure --prefix=$startdir/pkg/usr/local/pspdev --target=psp --enable-languages="c,c++" --with-newlib --enable-cxx-flags="-G0"
make clean || return 1
make CFLAGS_FOR_TARGET="-G0"
make || return 1
make DESTDIR=/ install
msg "building gcc-c++ finished"
msg ""
msg "removing unnecessary code"
cd $startdir/pkg/usr/local/pspdev/psp
rm -rf sdk
msg "Now you need to build and install pspsdk!"
And here the one for pspsdk:
pkgname=pspsdk
pkgver=2209
pkgrel=1
pkgdesc="A collection of Open Source tools and libraries written for the Sony Playstation Portable (PSP)."
url="http://ps2dev.org/psp/Tools/Toolchain/"
depends=('psptoolchain')
makedepends=()
arch=('i686')
license="custom"
_svntrunk=svn://svn.pspdev.org/psp/trunk/pspsdk
_svnmod=pspsdk
build() {
export PSPDEV="/usr/local/pspdev"
export PATH="$PATH:$PSPDEV/bin"
cd $startdir/src
svn co $_svntrunk $_svnmod
cd $_svnmod/
./bootstrap
./configure --prefix=/usr/local/pspdev -with-pspdev=/usr/local/pspdev
make clean || return 1
make DESTDIR=$startdir/pkg install-data
make clean || return 1
./configure --prefix=$startdir/pkg/usr/local/pspdev -with-pspdev=/usr/local/pspdev
make || return 1
make DESTDIR=$startdir/pkg install
Some explanation: I've used this one very often: --prefix=$startdir/pkg/usr/local/pspdev
Explanation: When I wanted to create only one PKGBUILD for the psptoolchain, some dependences were in $startdir/pkg. If you take --prefix=/usr/local/pspdev he won't get some depencies (mostly header files), which means I had to create single PKGBUILD's for every part of the psptoolchain (that would be 6 single parts).
Those --prefix-changes don't stop my psp environment from working! (tested it myself - I comiled almos all sample apps which were included in the pspsdk - and all compiled well)
I hope we can find a better solution than mine.
Thanks in advance
XazZ

HELP Need copy of installation disc for K7N415 Pro

Been to the MSI download center to try and download the bios and drivers I need for the refurbushed K7N415 Pro I just bought to upgrade the old 7T pro 2-a I've had for years. but it does not come with any installation disc or manuel's. I've been able to download a few but some of the links won't WORK!!! The manuel is one that I can't get If any one one this forum could burn me a copy of thier disc or point me to a place where I could download the manuel and drivers etc. it would make my life a lot easier! If any one has the manuel and install disk and would sell them to me I'd be glad to buy them or pay to have the install burned and sent to me.
Thanks in advance
Gilbo

Quote
Originally posted by Gilbo Genhis Khan
Dang, I'm batting a 1000 the link to the manuel for the 420D won't download either! I must have over looked the speedfan is it on the MSI download page? Thanks for the help guys! Just trying to be ready so I can put my girls PC together and set up a lan line to game on.
Thanks for any info
Gilbo
Speedfan

Help to configure msoutlook separate inbox for each accounts in office 365 in mac

i have installed office 365 in mac pro book and configured 3 accounts. all the mails are downloading to same inbox. please let me the configuration to receive mail in separate
inbox, sent, draft, etc.. for each accounts

Hi,
By default, the Outlook folder list groups similar folders, such as inboxes, from all of your mail and Microsoft Exchange accounts. This feature can make it easier to read all your messages at once, without having to move around between mail folders.
If you want, you can turn off this feature so that each account and all its folders are separated in the folder list:
http://office.microsoft.com/en-us/mac-outlook-help/show-separate-inboxes-for-each-account-HA102928387.aspx
Also, this is the forum to discuss questions and feedback for Windows-based Microsoft Office client, better to post your question to the forum of
Office for Mac:
http://answers.microsoft.com/en-us/mac/forum/macoffice2011?tab=Threads
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Thanks,
Ethan Hua CHN
TechNet Community Support

HELP - SWO1 - ERROR WHEN SETTING STATUS FOR RELEASED

Hi my friends,
I need to create a wf to PositionHR aproval.
I've already copyied the PDOTYPE_SH object to Subtype ZPDOTYPESH on SWO1 Tnx.
Now, I'm trying to set the object and methods status for "released". But SAP is giving me the following error message bottom:
- Please set required status for supertype first.
What can it be ?
tanks,
Glauco

Ho Glauco,
Check whether object PDOTYPE_SH is in Released status (it is not released in my 6.20 system). Check if you can set the status of ZPDOTYPESH to Implemented. You should be able to work with the object in Implemented status. I suggest that you post a message on OSS whether SAP recommends using the PDOTYPE_SH object since they have not released it.
Please post any future Workflow related questions in the Business process management (BPM) forum, the new home for Workflow.
Cheers,
Ramki Maley.

Help Needed Configuring Post Set Up For Big Indie Feature:

Similar Messages

Maybe you are looking for