Help needed connecting iPhone 5c to Windows 8.1 using Parallels 10 on Mac

I cannot for the life of me figure out how to get my iPhone to be recognized on my virtual machine- Windows 8.1 via Parallels 10.   I have read this documentation and keep getting dead ends iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support   .    
IPhone is recognized perfectly by iTunes in OS X, so I know my cable is good at least.
Any help in resolving this matter would be much appreciated.

According to the information I found on this HP support forum, it appears that the wireless card is 2.4GHZ only. I'll let you read on it. http://h30434.www3.hp.com/t5/Wireless-Internet-Home-Networking/hp-15-e050sa-5-GH z-Wireless-enabled/td-p/3448679

Similar Messages

  • HT4436 Do I need an iphone or apple device to begin using icloud? I just cant install and run on my windows desktop?

    Do I need an iphone or apple device to begin using icloud? I just cant install and run on my windows desktop?

    mriverchuck wrote:
    Do I need an iphone or apple device to begin using icloud?
    Yes. You need to create an iCloud Account on an Apple Device first.
    From Here >  http://www.apple.com/icloud/setup/pc.html
    " To enable iCloud on your Windows PC, first set up iCloud on your other devices, then install the iCloud Control Panel for Windows..."

  • Help mein connecting iphone to my pc

    Help mein connecting iphone to my pc

    Hey Hvdrhee,
    This is most likely caused by old software or drivers on your PC. Does your PC have Logitech QuickCam/Webcam, Lexmark scanners, or a media card reader software or installed?
    Try uninstalling the software and/or updating it.
    More information available here: http://support.apple.com/kb/TS1502
    Jason

  • I cann't connect ipad with my windows 7 laptop using bluetooth

    I cann't connect ipad with my windows 7 laptop using bluetooth

    for what purpos as you cant sync or transfer files using bluetooth
    on ios devices
    this is the profiles the ios devices support
    http://support.apple.com/kb/HT3647

  • How can I copy an email attachment from my iphone to my windows pc without using itunes

    Is there a way to transfer or copy a .zip file attachment in my mail on my iphone to my windows 7 PC without using iTunes?

    diesel vdub
    He is saying he doesn't have internet on the computer.
    it is a business situation where the PC has no connectivity to the internet

  • I used to have iPod shuffle connect to PC, I now want to use it on my Mac - how can I now assign iPod to Mac

    I used to have iPod shuffle connected to a PC, I now want to use it on my Mac - I cannot get iTunes to see the shuffle at all - trid the 5 sec fix - no go.  How can I now assign iPod to Mac?

    You can do a platform swap
    Order product | Platform, language swap

  • If I install Windows 7 & Office using Bootcamp in my Mac Air

    If I install Windows 7 using Bootcamp in my Mac Air , van I also installed Office in the windows partition?

    I'm not completely sure I'm understanding your question.  If you install Windows 7 via BootCamp, when you boot into Windows 7, your MacBook Air will work exactly like a Windows PC.  You can install Office or any other Windows application.  As there is no optical drive, the easiest method is to download Office directly from Microsoft.  You can also use Remote Disk to use the optical drive on a different machine:
    http://support.apple.com/kb/HT1777?viewlocale=en_US

  • HT5639 At present I have Windows programs installed using parallels 7. I now wish to delete all Windows based programs and revert the hard drive back to its original state ie single partition.  How do I go about it??

    At present I have windows based programs installed using parallels 7 on my Imac. I now wish to delete all the Windows programs etc and revert the Hard Drive to its original setting i.e single partition. How do I go about it??

    It's not clear if you installed Windows in a virtual machine or you installed Windows in Boot Camp but you run it in Parallels.
    If you installed Windows in Boot Camp, open "Boot Camp Assistant" (it's in /Applications/Utilities) and follow the steps to restore your hard disk into one volume. If you installed Windows on a virtual machine, just open Parallels and delete the virtual machine where you have installed Windows

  • Help needed connecting PC to AirportExpress

    I have a desktop connected wirelessly to my router which I was hoping to tap into to pipe music into my living room to play off of some speakers via airport express. However...
    I plugged in the AirPort Express, and it just keeps blinking yellow. I ran the install and opened up the Setup Assistant and it tells me that "An error occured trying to use the wireless networking system". I'm am using that very same wireless system to write and submit this post...so I know it works. But how can I get the two to communicate the way they need to?
    I should also mention that no base stations show up in either the Setup Assistant or the Admin Utility.

    Welcome to the discussions
    Check a couple of things.
    http://www.apple.com/support/downloads/airportexpressfirmwareupdate63forwindows. html
    You might also look at Airport for Windows that should help as well.
    http://www.apple.com/airportexpress/
    Cheers Don

  • HT204387 connect iphone 5s to windows laptop via bluetooth

    I am trying to connect my iPhone 5s to my Windows Laptop via Bluetooth.  The laptop can see the iPHone but cannot connect.  What can I do?

    Hello Rick,
    Congratulations on your new iPhone 5s!  To wirelessly sync your iPhone with iTunes, you need to be connected using a Wi-Fi network.  I found an article that has the steps outlined on how to sync your iPhone wirelessly with iTunes:
    Wi-Fi syncing
    Open iTunes
    To set up Wi-Fi syncing, connect your iOS device to your computer with the included USB cable. Select your device under Devices on the left-hand side.
    In the Summary tab, select "Sync with this [device] over Wi-Fi".
    Whenever the computer and the iOS device are on the same network, the iOS device will appear in iTunes, and you can sync it. The iOS device will sync automatically when all of the following are true:
    The iOS device is plugged in to power
    iTunes is open on the computer
    The iOS device and the computer are on the same Wi-Fi network
    While the iOS device appears in the left-hand column of iTunes, you can select the content tabs and configure sync options.
    Click Apply or Sync to sync the iOS device.
    You can find the full article here:
    iOS: Syncing with iTunes
    http://support.apple.com/kb/ht1386
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • Connecting Iphone & Ipad to Windows computer

    I recently downloaded iOS7 software into my iphone & ipad and now it won't connect my iphone & ipad to my Windows computer even after pressing
    'trust this computer'. Help please!
    Thank you

    Restart your phone and iPad by holding the home button and power button until the Apple logo appears. Also make sure you are using iTunes version 11.

  • Help needed connecting Iomega Minimax Ext HDD to Airport Extreme 802.11n

    Would appreciate if someone can help me with the following task. After researching and trying several things, I have not succeed in resolving the issue.
    I want to connect a Iomega MiniMax Ext HDD (for Mac) to my (Airport Extreme 802.11n + Time Capsule) box using the USB port at the back of my Airport Extreme. Then I want to access the Ext HDD wirelessly as a drive on my Macbook (snow leopard OS). I was told this was possible at the Apple Store...but have failed so far.
    Any suggestions so far

    Hello smitra. Welcome to the Apple Discussions!
    The following are the basic steps for sharing an external USB drive attached to either an 802.11n AirPort Extreme Base Station (AEBSn) or a Time Capsule (TC):
    o Plug the hard disk into the USB port on the back of the base station.
    o Open AirPort Utility, located in the Utilities folder in the Applications folder on a Mac, and in Start > All Programs > AirPort on a computer using Windows
    o Select your base station, and then, choose Manual Setup from the Base Station menu.
    o Click Disks in the toolbar, and then, click File Sharing.
    o Choose “With a disk password,” or “With base station password” if you want to secure the shared disk with a password, or choose “With accounts” if you want to secure the disk using accounts. If you choose to use accounts, click Configure Accounts, click the Add "+" button, and then enter a name and password for each user that will access the disk. For simplicity, I would recommend using the "With a disk password" option.
    o Choose “Not allowed,” “Read only,” or “Read and write” to assign guest access to the disk.
    o Select the “Share disks over Ethernet WAN port” checkbox if you want to provide remote access to the disk over the WAN port.
    You should now be able to find this drive within Finder under the SHARED category.

  • Urgent Help needed : Connecting Access 2000 with forms 6i

    Dear friends,
    I am really struggling to solve this connection issue. I am working with forms 6i, oracle 8i, in Windows XP pro environment. Developing programs using oracle 8i tables is ok, but there are tables in Access 2000, which I have to add the program that I am developing. The things I have done are
    - I have already tables in MS Access databse.
    - I Installed ODBC for microsoft and for Oracle as well(which . I added the MS Access Database there and I can perfom SQL from Oracle ODBC.
    - I also installed OCA for developer from the CD.
    From this point I followed the instructions in Developer Help menu and I was not able to connect and still trying, I will appreciate if anyone provide me sometips. Thanks in advance
    Best Regards

    Hi,
    I know the bad solution. But anyway, I'll tell you in any kind of help. I also had an AccessControlException when I started a RMI client program using JFileChooser. I rewrote policy files again and agin, but in vain. The last and ultimate method I did was remove the RMISecurityManager. This is obviously dangerous in the Internet, but if you use your application in the intranet or in some kind of safe environment. There would be no problem.
    Hope this could be any kind of your help.

  • Help needed connecting 2 routers

    Hello, I've been scratching around looking for a solution to my problem for a couple of weeks now.
    I have 2 routers (connected as per the pic below) - I have configured it so that I can collect access logs (this is one of the few routers I've found than can log internet URLs) for anyone who connects via wifi on the BEF router, however I can only get an internet connection if I use a LAN port (as per the red line). I've read that in order to log activity I need to connect via the internet port (yellow dotted line), but I can't get it to work and it's frustrating the heck out of me now
    Does anyone have any solutions for this?
    Thanks in advance.
    Solved!
    Go to Solution.

    Thank you for your help, re-instating the DHCP did the trick (after a power cycle).
    Just in case anyone else needs to do this, here is my final config;
    WAG160N is set to 192.168.1.1 with DHCP enabled.
    BEFW11S4 is set to 192.168.2.1 with DHCP enabled and auto select IP address.
    Thanks for all the suggestions everyone - just need a Wireless N ADSL router (to replace the two I've got hooked up) that can log all internet traffic now

  • Help Needed Connecting my new Ipod to Computer

    I have a new Ipod 30 gb. when first connected to home computer, i downloaded the entire music library onto ipod with no problems. then loaded software onto different pc, and connected ipod which promptly wiped all music files from ipod. When connecting back to original computer it keeps telling me that someone else is logged in and does not register the ipod on the original computer.
    How do i get the original computer to recognise the ipod and download the library back onto the ipod?
    HELP!
    Thanks
    Ipod 30GB   Windows XP Pro  

    Any experts out there? I am struggling with this one.
    I have a new Ipod 30 gb. when first connected to
    home computer, i downloaded the entire music library
    onto ipod with no problems. then loaded software
    onto different pc, and connected ipod which promptly
    wiped all music files from ipod. When connecting
    back to original computer it keeps telling me that
    someone else is logged in and does not register the
    ipod on the original computer.
    How do i get the original computer to recognise the
    ipod and download the library back onto the ipod?
    HELP!
    Thanks
    Ipod 30GB  
    Windows XP Pro  

Maybe you are looking for

  • Make a clob field as an editable column in a report

    Hello, I have a CLOB field column in my report and want to make this as an editable item. Can anyone please tell me what would be the best approach to deal with these kind of issue. Thanks, Orton

  • What is the keyboard shortcut for format painting in word please?

    what is the keyboard shortcut for format painting in word please?

  • Can't Successfully Click on Many Tools/Options in InDesign CS6

    I am a creative cloud member and I am having trouble with InDesign CS6.  Outwardly, it seems to install fine, but when I start it up I am unable to click on many of the options.  I can create a new document, and I can add a text box.  However, when I

  • Random number prob

    i am trying to create an array tht outputs random numbers...i keep getting one error which is in the for statement...can anyone help me weed this problem out? import java.util.* ; public class Arrays2{           // main(): application entry point    

  • How do I select underlying pictures

    hello is there a way I can select pictures or frame boxes that are underneath eachother without moving them aside? some adobe applications allow you to "Control Click" down the stack, are there layers in dreamweaver? Thanks