Help needed : DHCP not assigning addresses on VMware. click for more details.

Hello people of technet,
I'm new to this forum I was told I could get some help here. I need your help with an issue that I have on my network. As the title says, my DHCP server is not assigning addresses from a specific pool.
Information about the topology:
I have to sites linked with a VPN site to site connection. In the first site I have a DHCP Server, In the second site I have a client that should get an address automatically from the DHCP. I installed a DHCP relay agent on the server that manages the VPN
connection on the second site with a correct configuration. All other configurations are done right I verified a couple of times. I checked the connectivity with a ping test between the client (with static address for the test) from the second site to the
DHCP server from the first site, it is all working. The problem is that the DHCP server is not assigning addresses from the specific pool. All machines (4) run on windows server 2008 r2.
Thank you for your time and support, just tell me if you need more informations.

I fixed the problem it is working now, apparently it was the VMnet cards that caused the issue I've just reseted their configuration to default state. I've had the idea after you asked me to check DHCP address assignement on the same site. One more thing
to do now, switch from the workgroup to a domain.
Thank you for you time.

Similar Messages

  • Help, need to change IP address on host database for Portal

    Hi folks,
    Rather urgent assistance (as usual) needed. I have an installation working correctly on a pair of Win2k machines, one as the 9i database, one as the 9iAS/Portal. The app server has 2 NIC cards, one with public IP address (which is ok), one on the LAN. I need to reconfigure the LAN addresses on both the machines. Initial Portal install done without DNS, i.e. actual server/host addresses entered in the configuration.
    I have tried changing all of the TNS/Listner settings and the NIC card IP addresses and restarting the machines. The likes of SQLPlus work ok, with the TNS connect name allowing over the LAN access into the database with the new LAN addresses. I cannot seem to get the 9iAS/Portal to find the repository with the new addresses.
    Can someone help please? I can't find the answer in any documentation or other postings.
    Thanks in advance
    Rob

    There are other modes of operation for the plasst as well. I am listing them below but the formatting will make it difficult to read. If you like I can email it to you.
    Bill G...
    Configuring Portal when the HTTP server host name of the Infrastructure is changed
    Run the following from the $ORACLE_HOME/assistants/opca dir
    ptlasst.bat -mode SSOPARTNERCONFIG -i typical -sdad portal -host myApache.domain.com -port 7777 -silent -verbose
    NOTE:
    (1) This command would create a new Portal partner application in the SSO to reflect the changes of the Infrastructure. Before running this command please ensure to configure the SSO with the correct hostname by running the ssocfg.bat script located in the Infrastructure install (<infra_home>\sso\bin).
    The value for -host parameter will be the IP address of the infrastructure server and -port will be the port where the infrastructure http server is running on.
    Configuring Portal when the HTTP server host name of the Middle tier is changed
    ptlasst.bat -mode MIDTIER -i typical -host myApache.domain.com -port 7777 -ldap_h myOID.domain.com -ldap_p 389 -ldap_w welcome -pwd secret123 -portal_only -oh /home/oracle -chost myHostname.domain.com -cport_i 8001 -cport_a 8000 -wc_i_pwd invalidator -mc false -mi true -silent -verbose
    NOTE :
    (1) The -host value should match the serverName value of the httpd.conf
    (2) The -chost should be updated with the correct webcache hostname. In a default iAS midtier install the -host is same as the -chost.
    The value for -host parameter will be the IP address of the midtier(portal) server and -port will be the port where the portal is running on.
    Parameter Description Default Value Mandatory
    -i install_type Installation Type
    In the typical mode, the OPCA would get the Infrastructure information like the Portal schema name, Portal schema password, connect string to the Portal repository, SSO Partner application schema and password, SSO Password store schema and password and connect string to the SSO repository from the Repository Access API's.
    In the custom mode, the OPCA would take whatever is passed as the command line arguments.
    CUSTOM
    -mode mode The different install modes are : PORTAL, SSO, SSOPARTNERCONFIG, LANGUAGE, MIDTIER, ALL, SYSOBJECTS , DEINSTALL
    -s portal_schema Oracle Database schema for Portal database objects. In an iAS 9.0.2 install
    the default Portal schema name is portal portal
    -sp portal_password Password for Portal schema. In an iAS 9.0.2 install the portal schema password is randomized by default. Refer to the note "How to get the Portal schema password of the Infrastructure database ?" for details. <portal_schema>
    -c portal_connect Connect string to connect to the Portal repository <hostname>:<port>:<sid>
    -p sys_password The Oracle Database password for the Oracle SYS user MANDATORY
    -sdad portal_dad DAD for the Portal schema. Create the DAD to the Portal repository through the OEM. Refer to the note "How to create and manage the Portal and SSO DAD ?" for details. <portal_schema>
    -host portal_host Hostname of the HTTP server for Portal. This should match byte to byte with whatever is present in the ServerName attribute in the $OH/Apache/Apache/conf/httpd.conf file of the midtier. MANDATORY
    -port portal_port Port of the HTTP server for Portal. The Port attribute in the $OH/Apache/Apache/conf/httpd.conf file of the midtier would provide the value. 7777
    -ldap_h oid_host_name Host name of the OID server MANDATORY
    -ldap_p oid_port_number Port number of the OID server 389
    -ldap_d oid_admin_DN Admininstration DN cn=orcladmin
    -ldap_w oid_admin_pw Password for DN welcome
    -pwd initial_password Initial Password for seeded OID users. In iAS 9.0.2 install this is defaulted to the iAS instance password of the midtier installation. MANDATORY (for ALL or MIDTIER)
    -das_public Add Portal Groups to DAS Public Groups. The values could be Y or N. The default is Y. The setting publishes the Portal groups that the user can add to when creating the new user in OID. Y
    -u default_tablespace Install Portal objects in this tablespace. The default tablespace selected should have atleast 75 MB of free available space and should have autoextend on. Refer to the note "What are the recommended tablespace size required for Portal installation ?" for details. The default tablespace selected by default is users tablespace. users
    -t temporary_tablespace Use this tablespace for temporary objects. The temporary tablespace selected should have atleast 20 MB of free available space and should have autoextend on. Refer to the note "What are the recommended tablespace size required for Portal installation ?" for details. The temporary tablespace selected by default is temp tablespace. temp
    -d document_tablespace Install Portal document table in this tablespace. The document tablespace selected should have atleast 4 MB of free available space and should have autoextend on. Refer to the note
    "What are the recommended tablespace size required for Portal installation ?" for details. The documented tablespace selected by default is users tablespace. <default_tablespace>
    -l logging_tablespace Install Portal logging tables in this tablespace. The Logging tablespace selected should have atleast 4 MB of free available space and should have autoextend on. Refer to the note "What are the recommended tablespace size required for Portal installation ?" for details. The Logging tablespace selected by default is users tablespace. <default_tablespace>
    -in index_tablespace Install Portal index in this tablespace. The Index tablespace selected should have atleast 20 MB of free available space and should have autoextend on. Refer to the note "What are the recommended tablespace size required for Portal installation ?" for details. The Index tablespace selected by default is users tablespace. <default_tablespace>
    -lang language Abbreviation for the language to install us
    -m language_mode Specifies the mode for language installation
    if sso, translations only for Login server.
    if portal, translations only for Portal.
    if -m not specified, translations are installed for Both
    -demo Install Portal webview demos
    -silent Run mode for Portal Configuration Assistant. There is no UI provided by OPCA in the iAS 9.0.2 install. Use -silent option always
    -verbose Log mode for Portal Configuration Assistant. If this parameter is not set, logging information would be in brief and the OPCA would abort the install if it encounters any errors of kind
    ORA-, PLS- or SP2 errors.
    -report Install reports integration with Portal
    -owa Install OWA packages along with Portal This option behaves the same as the SYSOBJECTS mode.
    -sso_only Configure only SSO in mid-tier mode
    -portal_only Configure only Portal in mid-tier mode
    -available Language will be available for user translation
    -chost cache_host Cache host for Web Cache <hostname>
    -cport_i cache_inv_port Cahe port for Web Cache Invalidation 1100
    -cport_a cache_adm_port Cahe port for Web Cache Administration 1000
    -wc_i_pwd wc_inv_passwd Web Cache invalidator password invalidator
    -wc wc_on_off_flag Web Cache ON/OFF flag to enable or disable WC. The default is ON. If set to OFF Portal would not use Webcache though Web Cache may be up and running. on
    -o sso_schema Oracle Database schema for Login Server objects. In an iAS 9.0.2 install the default SSO schema name is orasso orasso
    -op sso_password Password for Login Server Schema. In an iAS 9.0.2 install the SSO schema password is randomized by default. Refer to the note "How to get the Portal schema password of the Infrastructure database ?" for more details. Use similar steps to get the password of the orasso. MANDATORY for the following modes:
    -MIDTIER: except when '-portal_only' is specified
    -LANGUAGE: except when '-m portal' is specified
    -DEINSTALL: except when '-drop PORTAL' is specified
    -odad sso_dad DAD for Login Server objects. Create the DAD to the SSO repository through the OEM. Refer to the note "How to create and manage the Portal and SSO DAD ?" for details. <sso_schema>
    -sso_c sso_connect Connect string to connect to the SSO repository If the Portal and SSO use the same database this option need not be passed and would default to the -c argument. <hostname>:<port>:<sid>
    -sso_h sso_host Hostname of the HTTP server for the SSO. If Portal and SSO use the same HTTP server this option need not be passed. It would default the HTTP server used for the Portal.
    -sso_p sso_port Port of the HTTP server for the SSO. If Portal and SSO use the same HTTP server this option need not be passed. It would default the HTTP port used for the Portal.
    -pa papp_schema SSO Partner Application Registration Schema. In an iAS 9.0.2 install the default Password store schema name is orasso_pa <sso_schema>_PA  
    -pap papp_password SSO PA Schema Password. In an iAS 9.0.2 install the SSO schema password is randomized by default. Refer to the note "How to get the Portal schema password of the Infrastructure database ?" for more details. Use similar steps to get the password of the orasso_pa <papp_schema>
    -ps pstore_schema Password Store Schema. In an iAS 9.0.2 install the default Password store schema name is orasso_ps <sso_schema>_PS  
    -pp pstore_password Password Store Password. In an iAS 9.0.2 install the SSO schema password is randomized by default. Refer to the note "How to get the Portal schema password of the Infrastructure database ?" for more details. Use similar steps to get the password of the orasso_ps. <ptore_schema>
    -pd pstore_dblink Database link from Portal schema to Password store. If the Portal and SSO use the same database this option need not be passed. <portal_schema>_DBLINK  
    -p_tns pstore_tns TNS connect string to Password Store. If the Portal and SSO use the same database this option need not be passed. The tnsalias should be created in the iAS 9.0.2 Portal middle tier.
    -s_tns portal_tns TNS connect string to Portal
    -ssotype ssotype SSO install type. Valid values are repository, midtier, all Repository
    -ultrasearch Ultrasearch configuration
    -drop drop_obj Drops either PORTAL or SSO or ALL (Both)
    if PORTAL, drops Portal schema and OID entries.
    if SSO,drops Portal schema and OID entries.
    if ALL, drops Portal and SSO schema and OID entries
    -oh oracle_home Oracle Home
    -mi midtier_install Midtier Installation
    -mc midtier_config Midtier Configuration
    -ssl Use SSL protocol for configuration. Pass this parameter only if SSL configuration is required. If this parameter is passed the -port passed should also be the SSL port of the HTTP server. Bt default this is not passed.
    -emhost em_host Enterprise Manager host for monitoring <hostname>
    -emport em_port Enterprise Manager port for monitoring 1810
    -iasname ias_name Name of the iAS instance that the install is installing on

  • All the pages in my frameset just stopped working, please help! click for more details

    im using .htm files as my pages...
    So I was trying to add a border to my frameset, and I saved
    the changes, all I thought I had changed was the border, but
    obviously not since that when I went to go look at it - all the
    frameset pages say no page to display
    www.illustratedimagery.com/testsite/illustratedimagery.htm
    that is the page.
    I no for sure the pages are still there... its just there is
    something wrong with the frameset.
    What I THINK is wrong is that the filenames that are supposed
    to be in the frameset are supposed to be (filename.htm) but when I
    saved it, it added a / before the filename... making it
    /filename.htm
    but whenever I try to remove the /... It just adds it back in
    after I save it!!!!!!!!!!
    What do I do!!!??

    You links are all root relative so they are looking for the
    pages to be on
    the top level of the site. You have the pages in a testsite
    folder .. if
    they were document relative, then you wouldn't have the / in
    front of the
    links and the links would work.
    You can change the links to document relative or you can put
    the testsite
    folder in the path.
    Nancy Gill
    Adobe Community Expert
    Author: Dreamweaver 8 e-book for the DMX Zone
    Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
    2003)
    Technical Editor: DMX 2004: The Complete Reference, DMX 2004:
    A Beginner''s
    Guide, Mastering Macromedia Contribute
    Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
    Web Development
    "caleb5991" <[email protected]> wrote in
    message
    news:eo6b9v$3i8$[email protected]..
    > im using .htm files as my pages...
    > So I was trying to add a border to my frameset, and I
    saved the changes,
    > all I
    > thought I had changed was the border, but obviously not
    since that when I
    > went
    > to go look at it - all the frameset pages say no page to
    display
    >
    >
    www.illustratedimagery.com/testsite/illustratedimagery.htm
    > that is the page.
    >
    > I no for sure the pages are still there... its just
    there is something
    > wrong
    > with the frameset.
    > What I THINK is wrong is that the filenames that are
    supposed to be in the
    > frameset are supposed to be (filename.htm) but when I
    saved it, it added a
    > /
    > before the filename... making it /filename.htm
    >
    > but whenever I try to remove the /... It just adds it
    back in after I save
    > it!!!!!!!!!!
    >
    > What do I do!!!??
    >

  • WRVS4400N : DHCP not assigning IP addresses if WAN link is down

    Hello,
    With the latest firmware installed (the one suporting fixed IP based on MAC), I have one problem: the DHCP server is not assigning addresses when the WAN link is down. When it is up, it generally assign IP based on the configuration binding (MAC/IP). But it sometimes fail to do so. Before using the wrvs4400n I had no issues with DHCP wrt54G and other routers.
    Any hints ?
    Thanks.
    V.

    Hi there!
    Thanks for contacting the business support - other guys got the same problem.
    I'm now back on firmware version 1.00.16 and everything works fine.
    But the new features were nice to have!

  • IPCP L2TP did not assigned address and install route

    Hi all,
    My Company recently using L2TP over radio link, for testing purpose the LNS using cisco 1841 and the L2TP client using 3 different machine:
    1. Hongdian Router
    2. Teldat Router
    3. Win XP client L2TP with IPSEC Disable
    there is problem when using Hongdian and Teldat router, the LNS did not assigned address and install route,the IPCP State suddenly closed as you can see at Debug LNS IPCP Fail.txt. I can assure you both router config is working (because when using another L2TP server like sl2tps or mikrotik, it just work fine).
    But When using Win L2TP client, it work as you can see at Debug LNS IPCP Success.txt
    i enclosed the config LNS too
    help plz anyone?

    Hi all,
    My Company recently using L2TP over radio link, for testing purpose the LNS using cisco 1841 and the L2TP client using 3 different machine:
    1. Hongdian Router
    2. Teldat Router
    3. Win XP client L2TP with IPSEC Disable
    there is problem when using Hongdian and Teldat router, the LNS did not assigned address and install route,the IPCP State suddenly closed as you can see at Debug LNS IPCP Fail.txt. I can assure you both router config is working (because when using another L2TP server like sl2tps or mikrotik, it just work fine).
    But When using Win L2TP client, it work as you can see at Debug LNS IPCP Success.txt
    i enclosed the config LNS too
    help plz anyone?

  • So im about to buy a mac pro, I just need help cause im not sure if it's worth paying more for instance, a hi-res screen compared to the stock screen, and will i really miss the .2 ghz and the upgraded video card if I get the 2.0 ghz mbp?

    So im about to buy a mac pro, I just need help cause im not sure if it's worth paying more for instance, a hi-res screen compared to the stock screen, and will i really miss the .2 ghz and the upgraded video card if I get the 2.0 ghz mbp?

    The_Tiger92 wrote:
    So im about to buy a mac pro, I just need help cause im not sure if it's worth paying more for instance, a hi-res screen compared to the stock screen, and will i really miss the .2 ghz and the upgraded video card if I get the 2.0 ghz mbp?
    It appears the 15" 2.2 ghz isn't worth spending $400 more for, but you get the 1GB Radeon 6750M that has four times the VRAM than the 15" 2.0Ghz model and about 167% more performance. High settings on all current games with over 50 fps.
    If your not into 3D gaming or just light weight, then the 2.0 Ghz (last years performance) will suffice on low-medium settings at about 30 fps.
    The 13" is rather poor as it has integrated graphics. 30 fps on only some games.
    The high res screen is a excellent choice and the anti-glare is great for viewing just about anywhere.
    No messy films to replace at $30-$40 a pop.
    A lot of people bring the glossy screens back once they hear about the anti-glare.
    http://www.pcpro.co.uk/blogs/2011/05/23/glossy-vs-matte-screens-why-the-pc-indus trys-out-of-touch/
    Here's my 17"
    In my opinion the extra $400 for another 2-3 years of use out of the computer is worth it.
    Quad cores are more than enough for most uses for most people for many years, it's just a slow card is going to make the machine feel slow in rendering graphics in the future.

  • HT1539 It was successfully  download the digital copy of the Avengers. But when I transfer it to my iphone  theres a note saying Itune Sync 1 item could not be synced. See Itunes for more information.  Can someone help me? It won't tansfer.

    I purchase the Avengers & the digital copy was successfully download to my Itunes library. But when I tried to drag the movie to my Iphone note showed ...
    Itunes Sync - 1 item could not be sync. See Itunes for more information. Help

    Hello eLZhi,
    Thanks for the question, and welcome to Apple Support Communities.
    The following article provides the most relevant information to your question:
    iOS: 'Not enough free space' alert when trying to sync
    http://support.apple.com/kb/TS1503
    Thanks,
    Matt M.

  • "Itunes sync. 55 items could not be synced. See itunes for more information

    I am having problems syncing songs from cds onto my ipod from itunes.
    I upload a cd onto my itunes account and it clearly works there and plays but when I plug in my ipod and click and drag the songs onto my device, itunes makes a weird noise and a message shows up on my ipod saying “Itunes sync. 56 items could not be synced. See itunes for more information” And, of course, there’s never anything on itunes to help me.
    Last time I did this, three of the 25 songs from the cd I wanted synced played on my ipod, and none of the others. Sometimes, if I do this enough, over the course of a few weeks, I can get the whole CD onto my ipod.
    The weirdest part is that the songs show up on my Ipod, but they are shaded over almost and cannot be played. It’s irritating.
    My Ipod is 4G and is in need of the latest update, but last time I updated my Ipod, all the songs were deleted and I had to resync all of them…so you can see why I’m hesitant to do this.
    My Itunes on the other hand, is all up to date.
    I just want my music please!

    Were they purchased with the SAME Apple ID you have registered the phone with?

  • [certain number] item(s) could not be synced.  See itunes for more information????

    Okay so recently I got a gift card with a £10 credit.  Now i have tried to buy an app for my iphone.  My iphone is on a different account to my itunes on my mac and so I authorized the account on my phone onto itunes.  Then I plugged in my phone and tried to drag the app icon there.  When I did, a smaller icon of that came up on my phone but didn't download.  So I unplugged the phone and tried to download again, it then said it was syncing.  And comes up with the message;
    1 item could not be synced.  See itunes for more.
    I tried again and then it said
    71 items could not be synced.  See itunes for more.
    I only want ONE item!!!!!!!!!
    Any if anyone can help please reply asap.
    Thanks
    Bubbleemi13

    Were they purchased with the SAME Apple ID you have registered the phone with?

  • 1 item could not be synced. See iTunes for more information

    After syncing  my iphone 4 ios 5 with itunes the following message appears ''1 item could not be synced. See iTunes for more information''.
    Everything seems to be synced however is there a way to find any information that itunes could not sync?

    This might not work for everybody, but... I noticed that right before the sync chokes, iTunes is processing photos. Likely, I figured, there's a discrepancy in what iTunes thinks is there and what actually is. An effective way to solve this issue (without obvious help from Apple / iTunes / iOS) is to remove the 'iPod Photo Cache' folder that's within the iPhoto Library on your synching system.
    So, on my Mac, I navigated to my Pictures folder, right-clicked (or Control-clicked) the 'iPhoto Library' icon, selected 'Show Package Contents,' then scrolled until I saw the 'iPod Photo Cache' folder, selected that folder and deleted it. I then restarted iTunes to re-initiate a sync.
    That seemed to resolve the "[n] tems could not be synced. See iTunes for more information." problem for me (which was occurring on my iPad 2 and iPhone 4S equally). Might work for you, too.

  • Items could not be synced. See itunes for more information.

    I have several items that I would like to have on my phone but I can;t get them on there. I get a message stating they could not be synced and see itunes for more information, but there isnt any information on itunes. I have found by checking the manually manage music, sync, then uncheck and sync, some items get across but not all. Whats going on?
    Also it seems impossible to manage the space on the phone. I have tried deleting stuff to make more room but still the hpone thinks there isnt rooom. Bring back walkmans and phones that work!

    Photos may cause this problem. When you sync photos to your iPhone, iPad, or iPod; iTunes creates a small version of each photo and stores them in a folder called “iPod Photo Cache.” Sometimes, inconsistencies between the real photos and photos in the cache folder may result in this error. To fix this error, simply remove the iPod Photo Cache folder(s).
    Don’t worry, this folder will be recreated automatically the next time you sync photos and removing this folder will not erase your original photos. Here is how you can locate the iPod Photo Cache folder so you can drag it to your Trash (on a Mac) or Recycle Bin (on a PC). Follow: Go > Home, then open the Pictures folder and find the iPhoto Library file. Control-click the iPhoto Library and choose Show Package Contents where you can locate the iPod Photo Cache folder and drag it to the Trash. Then restart iTunes to re-initiate your sync.
    from "http://appletoolbox.com/2011/12/items-could-not-be-synced-see-itunes-for-more-in formation-error-fix/"

  • 16 items could not be synced. See Itunes for more information

    I restored my iPhone 3GS from a iCloud backup.
    Now when my iPhone gets restored, i'm unable to get my most recent purchared songs back on my iPhone i get the message: "16 items could not be synced. See iTunes for more information". When I look to the playlist in iTunes, the songs that couldn't be synced with my iPhone are greyed out and have the sync icon next to them (see screenshot).
    Is there a solution to this problem except repurchasing those specific songs in iTunes?

    Great find by the both of you but please allow me to add my twist. I receive the same error message. Yet only every other day or so & for only 1 item. But unlike how the error was discovered in this fix, I can find nothing like this in iTunes. Again, it comes & goes & I really haven't added or taken anything away other than some Outlook appt.'s Idea's??  Thanks!

  • " 3 items could not be synced. See iTunes for more information"  I have searched and I have tried the solutions on the forum. My iPhone has been successfully synced without error and I am trying to sync with new laptop.

    " 3 items could not be synced. See iTunes for more information"  I have searched and I have tried the solutions on the forum. My iPhone has been successfully synced previously on my mac mini without error. I am trying to sync my iPhone with new MacBook Pro.

    Modular77:  With respect the dialog on the iPhone 'XX items could not be synced.  See iTunes for more information.' , would you happen to know where to look in iTunes?  I looked in all the places that seemed logical to me. 
    I am, however, asking only for future reverence, as the initial sync which generated the error dialog was done via USB, and almost immediately after the USB sync, I ran a WiFi Sync—two in a row in fact—both initiated from the iPhone.  Both WiFi syncs completed successfully with no error dialog. 
    I then ran another USB sync initiated from iTunes on the Macintosh, as was the first sync which gave the error. This second USB sync also completed successfully with no errors.
    I think someone in this thread mentioned non-AppleStore products or DMR issues which I think could not have been an issue in my case, as I was running the sync to install updated Apps from the AppStore, and additionally had deleted some music and movie items to make sure there was room for the App updates. Nothing was added other than the recently downloaded App updates from the AppStore. 
    iPhone3GS  iOS 5.1.1 build 9B206. 
              Developer Profile enabled.  iCloud enabled.
              32 GB “disk.” About 1.5 GB free after sync.
              iPhone NOT jailbroken
    MacBook 13-inch Aluminum, Late 2008 (NOT Macbook Pro)
         Lion 10.4.7 build 11E53.  2 GB RAM.
    Thanks for any info or advice.  Problem IS now solved, but it absorbed a lot of time to reach that point.

  • "X items could not be synced. See Itunes for more info" but Itunes AOK

    I am having problems syncing my iPhone to itunes. Itunes runs through the syncing process and at the end my phone says "X Items could not be synced. See Itunes for more info".  When I look at Itunes I can't find any evidence that something went wrong.  Is there an error log or something I can look up to find out what is going wrong?
    thanks!

    Found another thread with a few possible solutions. The one that worked for me was to delete the ipod photo cache in the "Pictures" folder. Here's the thread: https://discussions.apple.com/thread/3390697

  • An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help The profile for the user is a temporary profile. (Exception from HRESULT: 0x80090024)

    An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help The profile for the user is a temporary profile. (Exception from HRESULT: 0x80090024) 
     while proview the report i will get this error am using sql server 2008R2,
    can u plesae hlep me out for this
     

    <Header>
      <Product>Microsoft SQL Server Reporting Services Version 2009.0100.1600.01 ((KJ_RTM).100402-1539 )</Product>
      <Locale>English (United States)</Locale>
      <TimeZone>W. Europe Standard Time</TimeZone>
      <Path>C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\Logfiles\ReportServerService__01_30_2015_03_09_32.log</Path>
      <SystemName>WEGDACM1</SystemName>
      <OSName>Microsoft Windows NT 6.1.7601 Service Pack 1</OSName>
      <OSVersion>6.1.7601</OSVersion>
      <ProcessID>4880</ProcessID>
      <Virtualization>Hypervisor</Virtualization>
    </Header>
    rshost!rshost!5e4!01/30/2015-03:09:32:: i INFO: Currently registered url http://+:80/ReportServer_MSSQLSERVEREPORT/ on endpoint 2
    rshost!rshost!5e4!01/30/2015-03:09:32:: e ERROR: Failed to register url=http://+:80/Reports/ for endpoint 3, error=b7.
    rshost!rshost!5e4!01/30/2015-03:09:32:: w WARN: Endpoint 3 is enabled but no url is registered for vdir=/Reports, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportManager.
    servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: e ERROR: Error creating HTTP endpoint. System.Runtime.InteropServices.COMException (0x800700B7): Cannot create a file when that file already exists. (Exception from HRESULT: 0x800700B7)
       at Microsoft.ReportingServices.HostingInterfaces.IRsUnmanagedCallback.CreateHttpEndpoint(RsAppDomainType application, String[] urlPrefixes, Int32 cPrefixes, String[] hosts, Int32 cHosts, Boolean wildCardPresent, String virtualDirectory, String
    filePath, Int32 authType, Int32 logonMethod, String authDomain, String authRealm, Boolean authPersist, Int32 extendedProtectionLevel, Int32 extendedProtectionScenario, Boolean enabled)
       at Microsoft.ReportingServices.Library.ServiceAppDomainController.SetWebConfiguration(RunningApplication rsApplication, Boolean enabled, String folder)
    rshost!rshost!65c!01/30/2015-03:09:32:: i INFO: Endpoint 4 is disabled and no url is registered vdir=/ReportServer_MSSQLSERVEREPORT/ReportBuilder, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportServer\ReportBuilder.
    rshost!rshost!1e30!01/30/2015-03:09:32:: i INFO: Derived memory configuration based on physical memory as 16776696 KB
    servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: i INFO: Recycling the service from the default domain
    rshost!rshost!1e30!01/30/2015-03:09:46:: i INFO: Application domain type WindowsService statistics: created: 7, unloaded: 7, failed: 0, timed out: 0.
    appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:46:: i INFO: Appdomain:11 WindowsService_7 started.
    library!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
    The report server has encountered a configuration error. ;
    servicecontroller!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Error initializing configuration from the database: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
    error. 
    resourceutilities!WindowsService_7!1e30!01/30/2015-03:09:47:: i INFO: Reporting Services starting SKU: Enterprise
    servicecontroller!WindowsService_6!1e30!01/30/2015-03:09:47:: i INFO: Service controller exiting.
    appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 unregistered.
    appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 WindowsService_6 unloading.
    appdomainmanager!DefaultDomain!1f40!01/30/2015-03:09:47:: i INFO: AppDomain:10 0 pending unload(s)
    library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
    The report server has encountered a configuration error. ;
    library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Exception caught while starting service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
    error. 
    library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Attempting to start service again...
    library!DefaultDomain!202c!01/30/2015-08:04:43:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
    The report server has encountered a configuration error. ;
    library!DefaultDomain!202c!01/30/2015-08:25:26:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
    The report server has encountered a configuration error. ;
    library!DefaultDomain!202c!01/30/2015-08:26:16:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
    The report server has encountered a configuration error. ;
    The above is my log file pls find it resolve my problem,am trying to add the encryption key to my configuration seetings it will through the error like The profile you were used is temporary profile.

Maybe you are looking for