Help Needed - Even after lodging "Presidential Complaint"
Help needed please!!To make a long story short I have been through nothing but aggravation the past week trying to get my phone working. Service call on 7/6 to install Fios Internet, TV and phone. Internet and TV work fine, but Phone has no dial tone, going on a week and a half now. Tried contacting the account rep who set up my account, her supervisor as well as tech support on numerous occassions.
They set a dispatch for yesterday, and when the tech called me to say he was here, he was at an address i moved out of 4 years ago, in another state.I get a call from someone saying the service request was being closed and I need to call in with the correct address, after telling that rep I would not do that, that Verizon should make the updates based on my TV/Internet records, she hung up on me. Called back into Tech Support and the best they could do was an appointment for tomorrow. I then called the Corporate number and spoke with someone who opened a "Presidential Complaint" and requested an expedited call.. well i have heard nothing since then other than an automated call earlier today sayin my original service request will be kept. Needless to say I'm very upset that after a week and a half I still have no phone service and it doesn't seem like anyone is real willing to help me. I'm sure I'll get billed in full even though one of the 3 services I'm paying for hasn't been working in a week and a half..
Hi jkoen77,
Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. The title of your post is the link. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe". Please keep all correspondence regarding your issue in the private support portal.
Similar Messages
-
Hey guys, I'm from Holland so my english isn't that good.
I have a problem (Oh yes.) I have a background, for example(!) the left side of a bridge.
I want to animate that my background moves to the left, so the right side of the bright is visible.
I can do that, but now comes the problem. I have other layers, for example a road under the bridge with moving cars. How can i move the background and the other layers at the same time to the left? Without making it one layer.
thanks for your help, kind regards, Fabian.
Adobe After Effects.I will try your opties. I'll let you know if it worked for me.
Ok, this works for me!
To parent one layer to another, just click the dropdown box under where
it says 'parent' in the composition window and select the layer you want
it to follow. -
After The updating for IOS I can't find my hotspot even after the latest update IOS 7.0.4 ! I can't use my IPad as a modem any more again!
please I need some one to tell me how can I return my hotspot option?Hi there Buhamdaaan,
You may find the information in the articles below helpful.
iOS: Understanding Personal Hotspot
http://support.apple.com/kb/ht4517
iOS: Troubleshooting Personal Hotspot
http://support.apple.com/kb/ts2756
-Griff W. -
Attempt to install Mountain Lion has highlighted need for internal disk repair. Even after "repair" ML still says disk is damaged. Attempt to restore from Time Machine back-up failed - cannot 'see' internal HD to restore to. Help! Has attempt to install ML caused these problems or just highlighted existing need to Repair Disk? Even so, why can back-up from Time Machine not see the internal drive to restore to?
Csound1, William & Sig .... thanks for taking the trouble to reply. I fear you are right - I'll need a new disk. I'm booked in at the Apple Genius Bar in Bordeaux, France on Wed ... quite a challenge as my French isn't great! The current internal disk is 500gb, does anyone know whether I can upgrade my 21.5" iMac (circa Oct-2009 vintage) to a larger size internal disk, 1Tb or even 2Tb? I already have one external 2Tb drive and another one on order (I have masses of media stored and more planned as I've just taken up photography). Seems a bit of a pain managing with only 500gb internal storage. OR, can you advise me on how I can store all my photos on my new 2Tb external drive - I can't seem to figure out how to set the path for iPhoto to see them (I can't even figure out where they are stored right now!). Same with iTunes, how do I set the default storage to the external drive (I moved everything manually and then imported them all from the new drive - it worked but seemed very convoluted). Any advice on how to manage multiple drives gratefully received. And thanks again for previous replies.
-
Not sure what I did, but Preview continues to stay frozen even after force quitting, rebooting and reopening. It seems like it is trying to open all 720 pdf documents I have on my internal memory. That's my best guess... I really don't know what happened. I've tried clicking the 'close windows when closing application' option under general settings and every other thing I've seen listed on help sites... nothing is working. PLEASE HELP?!?
Back up all data. Quit Preview if it's running.
Hold down the option key and select Go ▹ Library from the Finder menu bar. From the Library folder, delete the following items, if they exist:
Containers/com.apple.Preview
Preferences/com.apple.Preview.LSSharedFileList.plist
Preferences/com.apple.Preview.SandboxedPersistentURLs.LSSharedFileList.plist
Saved Application State/com.apple.Preview.savedState
Log out and log back in. Launch the application and test. -
I am using iPhone 5s , internet is not working on cellular data even after it is on , wifi is working properly . Please help apple team.
Hello Mario:
I'm actually surprised that Apple continues to push out 8.02 without addressing these issues. The problem will only anger more users and certainly finger-poking at Airplane Mode isn't the answer. This is an iOS8 code problem and no amount of 'resetting' is providing a reliable fix/solution that sticks.
These issues with loss of cell connectivity, apps that have lost functionality, etc., which are all directly associated to the arrival of iOS8, are so widespread in the user community and pervasive within individual iPads that it's clear there are significant fundamental problems with this release. Given the problems are so blatant, it's fair to ask the question of how they got by the Apple validation team.
What is the status at Apple on rolling out a fully V&V'd version to resolve this? Respectfully, when it comes to some of my more useful apps, my personal iPad has become a paperweight. The user forums are full of these iOS8 complaints for several weeks and there doesn't seem to be a competent answer from Apple. Even a "We're aware and we're working on it" would be well received.
Any hope that you can provide will be appreciated. (I'll be monitoring the thread on my Dell laptop because, well, my iPad is i-Inop!).
Thanks! -
Help: Just finished shooting a wedding and Aperture crashes constantly during editing. All pic's in RAW and even after making sure I have the latest Aperture update, I have had to rebuild my library twice and "repair" does not seem to fix the issue. Help?
Well!
If you have ThunderBolt, I would go with such for an External Working Drive, spinning platter or SSD depending on your budget
This does not have to be huge just big enough to house your most current Jobs
Once the Current Job is put to rest I would move it to a larger multi bay hard drive unit, USB or FireWire nothing fancy, no RAID, set up as one single Disk
This would only be accessed when something is needed from a past Job so the connection does not have to be speedy
The Drobo would be relegated to Vaults and backups
You can set up a Vault on the Drobo to back up the External Working Library and then Reconnect it when you have moved the Library over to the other Enclosure
This has worked for me pretty smoothly for a long while, but I have found over the years that one can not assume all people work in the same manner! :-) -
my iphone 4 is not turning on even after long pressing home and sleep/awake button together (about 10-60 sec).
Crap. That's what I was afraid of...Well, since I'm away from home and not near my pc, it sounds like I'm out of luck. The problem is that I need my phone to be at least functional for making and receiving calls. There's an apple store nearby. Perhaps I can go there and have them restore it and at least I'll be able to make and receive calls until I get home and restore from my backup. Does that sound feasible, or am I missing something?
P.s. I tried to click "correct answer" and accidentally hit "helpful". Sorry about that... -
I cannot configure yahoo small business after upgrading to Mavericks Help needed
Hi Guys,
it is as simple as that:
I cannot configure yahoo small business after upgrading to Mavericks Help needed
ThanksPlease read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
Help please! I have been using Mountain Lion for a few weeks but Finder, System Prefferences and the App Store won't load and/or keep crashing even after reinstalling the OS. How do to fix it?
Model Identifier: MacBookPro8,1
Processor Name: Intel Core i7
Processor Speed: 2.7 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 4 MB
Memory: 8 GB
Boot ROM Version: MBP81.0047.B27
SMC Version (system): 1.68f99You need to check to make sure you are actually connected to the network. Tap Settings > WiFi >and then tap the blue ">" next to the network name with checkmark. You should see a complete set of IP address but if the router didn't issue you an IP address properly, you will see your touch IP address start with 169.x. If this is the case, you are connected to the internal network but not to the web.
First thing to do (while you are on that screen) is tap "Forget Network". Then turn WiFi off. Turn it back on and, if needed, tap Other and re-enter your network information. If you continue to have problems, check with your IT department on Monday.
In the meantime, your laptop and iTunes can be used to purchase apps and music. Syncing them with your touch is a great way to get them installed while you are waiting for the answer on your WiFi problem. -
Hi Guys,
I have have this horror issue with my PC. I have even changed the hardware configuration and the problem still persists. My PC fails to display the desktop correctly after using highly RAM intensive applications, especially Chrome, but even after getting
the chance to close it, or waiting for it to crash by itself, the PC is still not able to display correctly the GUI, even on other browser/applications as shown in the screenshots.
1st Hardware Config:
Intel Core2Quad Q9450
4x2GB DDR2
MSI P43 motherboard
Ati Radeon x550 video card
Software used, that seemed important for me to mention:
NOD32 v4.2
Comodo Firewall 5.12
Chrome
Screenshot Captor
SpeedFan
Other mentions:
Aero is disabled, because I've considered that it's one of the causes.
So, I've considered that it's a RAM issue or a videocard issue, and I've upgraded to:
Intel Core i7 3770k
4x8GB DDR3
Asus P8Z77V-LX motherboard
Intel GPU integrated in the 3770k CPU
The problem just happened 2 times on this rig also, and the RAM was not even coming close to it's maximum capacity of 31.7GB. It was at ~20GB's.
Also, this is another videocard(Intel's integrated GPU), so we can exclude the videocard from the suspects.
My suspects:
1) some desktop manager bugs, or other similar issue
2) video memory allocation - I'm still suspecting that it can be caused by the amount of RAM dedicated to the videocard, currently, I think that it is at 256MB.
3) some poorly designed components of Chrome/Screenshot Captor - still very questionable since there are enough resources on this system, so there should be no fight over resources. And when the system is barely used there are no issues.
4) Adobe Shockwave Flash - maybe this one????
I have attached a set of 20 screenshots here, these were taken on the 1st configuration of my PC, using Q9450:
http://imgur.com/a/Mc8hI#4
Notice how it distorts the image by duplicating it and showing it in a smaller space, or how does it displays those black rectangles. In those moments, the PC is fully functional(the apps are running the background), without being slowish or something, but
you can hardly control it like that. For example, I've tried to remove the mouse from the USB, and then I've insterted it back, the image was not displayed correctly, but the mouse was recognised instantly and the pointer was controlable.
Same thing still happens on the new configuration. Please advise me.
LE: OS is Windows 7 x64 SP1 Professional and it's Geniune. There is no cracked software on this PC. No games. I've tried to maintain it as clean as possible.Hi,
First, please be ensured that you have installed the latest drivers and all the updates.
Then check whether this issue will not in
Safe Mode. If it didn’t occurred, I suggest you narrow down the cause in
Clean Boot mode.
In addition, try to create a new profile to see how it works.
Hope this helps.
Vincent Wang
TechNet Community Support -
When I went to update my iPod touch on iTunes, it said unable to update then the iPod shutdown and no longer showed connected in iTunes. I have tried holding down both buttons for up to 3 mins with no luck turning it on, even after a full charge. Help?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iPad frequently locks up, even after updating to iOS 7.1. When it locks up it's nonresponsive to the home button and the only remedy is to force a shut down and reboot. Help!
DEVICE NOT RECOGNISED IN ITUNES
If you have connected your device to your computer and it does not appear in the side bar in iTunes then for Windows computers read http://support.apple.com/kb/TS1538 or if you have a MAC then read http://support.apple.com/kb/ts1591 for troubleshooting steps. -
I am trying to access a webpage but it keeps saying I need a client certificate. Even after I click 'continue', I still cannot access the webpage.
https://etivity.sul.com.au/
It's to access my work rosters. -
I updated my ipad 2from IOS 5 to IOS 8. All games and apps that I downloaded was deleted. What can I do to return them back, even after downloading one of the games He deleded all the steps I went through and I need to start all over again
iCloud: Restore or set up your iOS device from iCloud
Or from iTunes http://www.iphonefaq.org/archives/971992
Maybe you are looking for
-
I am having real trouble with the mac book air and i dont know what to do. It thinks it is full, i get warning messages every day, but when i check how the storage is being used it is 45.79 GB of "other" and I can't work out where to locate and dele
-
Opening an Application on IMAC
I have just downloaded the "Pages" application on my IMAC but I cant open it. I open Itunes and then click on the icon but it does nothing.
-
'error in MSVCRT.DLL' when i try to open installer
hi, i was trying to install J2SE 1.4.2, the file is complete and not corrupted but when i try to open the installer program i get this message: The program has caused an error in MSVCRT.DLL what can i do to make it work? thanks, nick
-
Capacity issue on Metro Ethernet
We have a 10MB Metro-E customer experiencing bandwidth issues and would like to determine if we could be the cause. We have 9 of these 10MB Metro-E's, our host circuit is 50MB and our backbone is 100MB (bandwidth on the host and edge never exceed 50%
-
The standby time is only 12 hours, in the closing of all the background conditions, WHY?
A new machine for 2 days is the same situation