HELP NEEDED FAST!

Hey, I hava a rather large problem. just so you know, I am american, and run english language everything. my specs are: [Windows XP PRO] [Athlon 64 FX-55] [ASUS A8N-SLI N-force 4 SLI mobo] [2 gigs ram] [2 6800GT s56 MB]. If anyone remembers, a day or two ago I posted a thread called "Driver uninstall/install help needed", that you can find here, http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=28565
A guy linked me some drivers, and now, when I uninstalled the old ones and was gonna install the new ones, I clinked on the amd64 thing in the suprrt thing, went to ctzapxx, amd it says "C:/Documents and Settings/chief/desktop/drivers/support/amd64/ctzapxx.exe is not a valid win32 application."
I am now stuck with no sound or drivers unless I use the system restore point I made before I did the uninstall/install thing.
I would really like some advice, or better yet, and explanation of why they don't work and where i can get some that do. I will bump this if it falls off the 'st page until i get a answer.
Thanks so much for any help
EDIT: I'm gonna go to sleep, so I'll check on the thread in anbout 8 - 9 hours when I wake up before I go to school.Message Edited by Hillbilly_37 on 09-08-2005 06:04 AM

Hillbilly_37 wrote:
Hey, I hava a rather large problem. just so you know, I am american, and run english language everything. my specs are: [Windows XP PRO] [Athlon 64 FX-55] [ASUS A8N-SLI N-force 4 SLI mobo] [2 gigs ram] [2 6800GT s56 MB]. If anyone remembers, a day or two ago I posted a thread called "Driver uninstall/install help needed", that you can find here, http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=28565
A guy linked me some drivers, and now, when I uninstalled the old ones and was gonna install the new ones, I clinked on the amd64 thing in the suprrt thing, went to ctzapxx, amd it says "C:/Documents and Settings/chief/desktop/drivers/support/amd64/ctzapxx.exe is not a valid win32 application."
I am now stuck with no sound or drivers unless I use the system restore point I made before I did the uninstall/install thing.
I would really like some advice, or better yet, and explanation of why they don't work and where i can get some that do. I will bump this if it falls off the 'st page until i get a answer.
Thanks so much for any help
EDIT: I'm gonna go to sleep, so I'll check on the thread in anbout 8 - 9 hours when I wake up before I go to school.Message Edited by Hillbilly_37 on 09-08-2005 06:04 AM
You're trying to run CTZAPXX.EXE version intented to be executed on 64-bit operating system (eg. Windows x64) while you're using 32-bit XP.
You find the 32-bit version of CTZAPXX lying in another folder (i386).
NOTE: When you install/update drivers using CTZAPXX.EXE you do not need to uninstall your previous drivers, but just 'accept' the 'option' asking your permission to stop all shared components while updating.
Hope this cleared something.
.jtp

Similar Messages

  • Server will not boot after update !! Help needed fast !!

    I have a new (Aug 2005) XServe G5, running 4.3.
    Active Directory integrated, stores home folders (AFP), manages preferences and 5 print queues for 55 Mac OS X.4.3 clients and 200 users.
    It downloaded the 4.4 update, unchecked the OS 4.4 update (I think was my first mistake), restarted. Now, at boot up, about the moment the apple would appear (maybe it appears for a split second) all I get is the ugly not sign.
    -- Am able to boot to external firewire drive
    -- Drive shows as boot option
    -- Disk repair reported no problems to fix
    -- Can not find any log entries after last shut down. No service ever starts for any entries to be made.
    -- Applied the 4.4 update successfully while booted from external fw drive, no effect. Startup disk reports system to be OS X Server 4.4 and lists as a boot option.
    -- Drive behaves same when transferred to my G5 tower: big not sign.
    What other steps can I do to troubleshoot this boot problem? If I don't get this server up this weekend, I'll get roasted by an angry mob.
    Any suggestions are welcomed and greatly appreciated.

    Eeh...
    Always clone the existing system prior to updating it. Do so when the server is not in use, shut off services where possible (you want it to be as quiescent as possible).
    Mike Bombich (at Apple) describes how you can do this via the command-line, which I prefer for this purpose (you can stagger the process):
    http://www.bombich.com/mactips/image.html
    Now then:
    Have you booted from the install CD and used Disk Utility to run Repair Permissions ? That should be your first step.
    It may change nothing, but can you boot into Safe mode ? Hold down the Shift key at powerup and keep holding it until you see: "Safe boot"
    If you CAN get it booted in that state, then run the 10.4.4 COMBO updater
    you need to run the combo updater at this point. After doing so, use Disk Utility to run repair permissions on the boot drive itself, and then reboot.
    Otherwise, start it in Target Disk Mode as you did before, connect it to a unit running 10.4.4, and run the /combo/ 10.4.4 Server updator (NOT client, of course) onto the server's mounted hard drive.
    I'm not sure you can do this while running 10.4.x client. You may need to do a quick install of 10.4 server (say onto a Firewire drive), boot your spare Mac from it, and -then- mount the server via Firewire target mode, and apply the 10.4.4 server combo updater.
    Good luck !

  • Exception occuring during Application exit.Help needed fast

    The Error attached is printed on the console when I exit my Application.My Application is Swing application which reads two or more xml schemas at a time from a local directory and displays the schemas in Tree like structure using JTree,so that mapping can be done using java drag-n-drop apis.
    But during System.exit(1) (on Application Close) the exception Attached gets printed.I have invoked Syste.gc() to enforce garbage collection but to no effect.Please help to solve this problem.
    Thanks
    Pallav
    --ERROR printed on console
    An unexpected exception has been detected in native code outside the VM.
    Unexpected Signal : EXCEPTION_ACCESS_VIOLATION occurred at PC=0x0
    Function name=(N/A)
    Library=(N/A)
    NOTE: We are unable to locate the function name symbol for the error
    just occurred. Please refer to release documentation for possible
    reason and solutions.
    Current Java thread:
         at sun.awt.windows.WToolkit.eventLoop(Native Method)
         at sun.awt.windows.WToolkit.run(WToolkit.java:183)
         at java.lang.Thread.run(Thread.java:479)
    Dynamic libraries:
    0x00400000 - 0x00405000      S:\software\jdk1.3.1_06\bin\java.exe
    0x77F80000 - 0x77FF9000      C:\WINNT\System32\ntdll.dll
    0x77DB0000 - 0x77E0A000      C:\WINNT\system32\ADVAPI32.dll
    0x77E80000 - 0x77F36000      C:\WINNT\system32\KERNEL32.DLL
    0x77D40000 - 0x77DAF000      C:\WINNT\system32\RPCRT4.DLL
    0x78000000 - 0x78046000      C:\WINNT\system32\MSVCRT.dll
    0x6D420000 - 0x6D4F9000      S:\software\jdk1.3.1_06\jre\bin\hotspot\jvm.dll
    0x77E10000 - 0x77E75000      C:\WINNT\system32\USER32.dll
    0x77F40000 - 0x77F7C000      C:\WINNT\system32\GDI32.DLL
    0x77570000 - 0x775A0000      C:\WINNT\System32\WINMM.dll
    0x6D220000 - 0x6D227000      S:\software\jdk1.3.1_06\jre\bin\hpi.dll
    0x6D3B0000 - 0x6D3BD000      S:\software\jdk1.3.1_06\jre\bin\verify.dll
    0x6D250000 - 0x6D266000      S:\software\jdk1.3.1_06\jre\bin\java.dll
    0x6D3C0000 - 0x6D3CD000      S:\software\jdk1.3.1_06\jre\bin\zip.dll
    0x6D020000 - 0x6D12A000      S:\software\jdk1.3.1_06\jre\bin\awt.dll
    0x77800000 - 0x7781D000      C:\WINNT\System32\WINSPOOL.DRV
    0x75E60000 - 0x75E7A000      C:\WINNT\System32\IMM32.dll
    0x77A50000 - 0x77B45000      C:\WINNT\system32\ole32.dll
    0x6D1E0000 - 0x6D21B000      S:\software\jdk1.3.1_06\jre\bin\fontmanager.dll
    0x10000000 - 0x10007000      D:\Program Files\Yahoo!\Messenger\idle.dll
    0x72800000 - 0x72846000      C:\WINNT\System32\ddraw.dll
    0x728A0000 - 0x728A6000      C:\WINNT\System32\DCIMAN32.dll
    0x0D4F0000 - 0x0D503000      D:\PROGRA~1\INCRED~1\bin\ImHook.dll
    0x779B0000 - 0x77A45000      C:\WINNT\system32\OLEAUT32.dll
    0x6D340000 - 0x6D348000      S:\software\jdk1.3.1_06\jre\bin\net.dll
    0x75050000 - 0x75058000      C:\WINNT\System32\WSOCK32.dll
    0x75030000 - 0x75044000      C:\WINNT\System32\WS2_32.DLL
    0x75020000 - 0x75028000      C:\WINNT\System32\WS2HELP.DLL
    0x77840000 - 0x7784C000      C:\WINNT\System32\rnr20.dll
    0x77980000 - 0x779A4000      C:\WINNT\System32\DNSAPI.DLL
    0x777E0000 - 0x777E8000      C:\WINNT\System32\winrnr.dll
    0x77950000 - 0x77979000      C:\WINNT\system32\WLDAP32.DLL
    0x777F0000 - 0x777F5000      C:\WINNT\System32\rasadhlp.dll
    0x77830000 - 0x7783E000      C:\WINNT\System32\RTUTILS.DLL
    0x74FD0000 - 0x74FE1000      C:\WINNT\system32\msafd.dll
    0x75010000 - 0x75017000      C:\WINNT\System32\wshtcpip.dll
    0x6D2C0000 - 0x6D2DB000      S:\software\jdk1.3.1_06\jre\bin\jpeg.dll
    0x77920000 - 0x77942000      C:\WINNT\system32\imagehlp.dll
    0x72A00000 - 0x72A2D000      C:\WINNT\system32\DBGHELP.dll
    0x690A0000 - 0x690AB000      C:\WINNT\System32\PSAPI.DLL
    Local Time = Thu May 29 17:43:20 2003
    Elapsed Time = 396
    # The exception above was detected in native code outside the VM
    # Java VM: Java HotSpot(TM) Client VM (1.3.1_06-b01 mixed mode)

    to bbritta,
    Sorry it did not help.By the way i am using windows 2000 Server.Application Server is Weblogic 7.0.No exception is shown in the Weblogic console also.
    There is no problem in drawing of maps.Drag-n-Drop is working perfectly.But during application exit this errors occuring.
    Thanks for your attempt.
    Pallav

  • Need fastly help. A friend installed MAC false, my MAC isn't starting with THW normal MAC System. How can I change that?, Need fastly help. A friend installed MAC false, my MAC isn't starting with THW normal MAC System. How can I change that?

    I need fastly help.
    I am going to cry.
    A friend installed for lexware Office Easy plus Windows 7 but not with boot-i don't know.
    I Never worked with windows and ma MAC is now just starting with windows 7.
    Please help me, how can I get MAC IOS - i don't know back??

    Welcome to the Apple Support Communities
    If I've understood you, you can't start into Mac OS X. Press X key after the startup sound, so your computer will start in OS X

  • Internal Microphone "Not Plugged In". *No help needed anymore*

    edit: no help needed anymore
    Hello. My internal microphone stopped working ever since I stopped using the default Toshiba version of Windows 7.
    I have downloaded all the correct drivers for my Toshiba L750-BT4N22, especially the Conexant SmartAudio HD driver.
    My internal microphone shows up in sounds/hardware, but it says "Not Plugged In". Also, every once in a while my sound get's choppy when I "seek" or move fast through a video file.
    Could use some help, thanks.

    I seem to have fixed it, thanks.

  • My Pc shutDown When Running Game Then Bettery Be Hot. Please Help Me Fast

    My Pc shutDown When Running Game Then Bettery Be Hot.
    Like iM Play FaceBook Game'S FarmVille Etc Or AnyGame Like San Andreas MultiPlayer / Online Games...... After 10-20 Mnt My Pc ShutDown i ReFormated iT But The Same Problem . Here My Computer Details Please Help Me .. .. . . . . . ..  .. . . . . .. . .. . . . .  i Need Help .. . .. . .. .. . . . .. . .. .. . . ..
    http://img204.imageshack.us/img204/4028/detailsb.png
    Please Help Me i Need Fast Help .... . . . . . . .... .. . .. . .. . . .. . . . .. ..  .. . . .
    subject edited by moderator.
    ps: no need to add "not solved" tag into the subject. 

    Hi and welcome to the forum!
    Which lenovo notebook is it? Does it have a sticker on the bottom bearing a number like 2668-KHU? Let us know that number, there is no need to post S/N though.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • HT5312 Hi i need fast the security questions answear how can i get it ?

    Hi i need fast the security questions answear how can i get it ?

    If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
    If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then see if the instructions on this user tip helps you get them reset : https://discussions.apple.com/docs/DOC-4551

  • Troubleshoting help needed:  My iMac keeps crashing and restarting with a report detail: "spinlock application timed out"  What can I do to fix this?timed out"

    Troubleshooting help needed:  My iMac keeps crashing and restarting with a notice: "Spinlock application timed out"  What can I do?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
    Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

  • Help needed for writing query

    help needed for writing query
    i have the following tables(with data) as mentioned below
    FK*-foregin key (SUBJECTS)
    FK**-foregin key (COMBINATION)
    1)SUBJECTS(table name)     
    SUB_ID(NUMBER) SUB_CODE(VARCHAR2) SUB_NAME (VARCHAR2)
    2           02           Computer Science
    3           03           Physics
    4           04           Chemistry
    5           05           Mathematics
    7           07           Commerce
    8           08           Computer Applications
    9           09           Biology
    2)COMBINATION
    COMB_ID(NUMBER) COMB_NAME(VARCHAR2) SUB_ID1(NUMBER(FK*)) SUB_ID2(NUMBER(FK*)) SUB_ID3(NUMBER(FK*)) SUBJ_ID4(NUMBER(FK*))
    383           S1      9           4           2           3
    384           S2      4           2           5           3
    ---------I actually designed the ABOVE table also like this
    3) a)COMBINATION
    COMB_ID(NUMBER) COMB_NAME(VARCHAR2)
    383           S1
    384           S2
    b)COMBINATION_DET
    COMBDET_ID(NUMBER) COMB_ID(FK**) SUB_ID(FK*)
    1               383          9
    2               383          4
    3               383          2
    4               383          3
    5               384          4
    6               384          2          
    7               384          5
    8               384          3
    Business rule: a combination consists of a maximum of 4 subjects (must contain)
    and the user is less relevant to a COMB_NAME(name of combinations) but user need
    the subjects contained in combinations
    i need the following output
    COMB_ID COMB_NAME SUBJECT1 SUBJECT2      SUBJECT3      SUBJECT4
    383     S1     Biology Chemistry      Computer Science Physics
    384     S2     Chemistry Computer Science Mathematics Physics
    or even this is enough(what i actually needed)
    COMB_ID     subjects
    383           Biology,Chemistry,Computer Science,Physics
    384           Chemistry,Computer Science,Mathematics,Physics
    you can use any of the COMBINATION table(either (2) or (3))
    and i want to know
    1)which design is good in this case
    (i think SUB_ID1,SUB_ID2,SUB_ID3,SUB_ID4 is not a
    good method to link with same table but if 4 subjects only(and must) comes
    detail table is not neccessary )
    now i am achieving the result by program-coding in C# after getting the rows from oracle
    i am using oracle 9i (also ODP.NET)
    i want to know how can i get the result in the stored procedure itsef.
    2)how it could be designed in any other way.
    any help/suggestion is welcome
    thanks for your time --Pradeesh

    Well I forgot the table-alias, here now with:
    SELECT C.COMB_ID
    , C.COMB_NAME
    , (SELECT SUB_NAME
    FROM SUBJECTS
    WHERE SUB_ID = C.SUB_ID1) AS SUBJECT_NAME1
    , (SELECT SUB_NAME
    FROM SUBJECTS
    WHERE SUB_ID = C.SUB_ID2) AS SUBJECT_NAME2
    , (SELECT SUB_NAME
    FROM SUBJECTS
    WHERE SUB_ID = C.SUB_ID3) AS SUBJECT_NAME3
    , (SELECT SUB_NAME
    FROM SUBJECTS
    WHERE SUB_ID = C.SUB_ID4) AS SUBJECT_NAME4
    FROM COMBINATION C;
    As you need exactly 4 subjects, the columns-solution is just fine I would say.

  • Help needed I have a canon 40D. I am thinking of buying a canon 6D.But not sure that my len

    Hi all help needed I have a canon 40D. I am thinking of buying a canon 6D.
    But not sure that my lenses will work.
    I have a 170mm/ 500mm APO Sigma.
    A 10/20 ex  Sigma   HSM  IF.
    And a 180 APO Sigma Macro or do I have to scrap them and buy others.
    ALL Help will be greatly received. Yours  BRODIE

    In short, I love it. I was going to buy the 5DMark III. After playing with it for a while at my local Fry's store where they put 5DMII, 5DMIII and 6D next to each other, using the same 24-105L lens, I decided to get the 6D and pocket the different for lens later.
    I'm upgrading from the 30D. So I think you'll love it. It's a great camera. I have used 5DMII extensively before (borrowing from a close friend).
    Funny thing is at first I don't really care about the GPS and Wifi much. I thought they're just marketing-gimmick. But once you have it, it is actually really fun and helpful. For example, I can place the 6D on a long "monopod", then use the app on the phone to control the camera to get some unique perspective on some scenes. It's fun and great. GPS is also nice for travel guy like me.
    Weekend Travelers Blog | Eastern Sierra Fall Color Guide

  • Help needed! Raid degraded again!

    Hi!
    Help needed! I hava made bootable RAID with two S-ATAII 250Gb HDD and its not working! Every now and then at bootup I get a message RAID -> DEGRADED... Must be seventh time! Rebuild takes its own time!
    What am I doing wrong!
    T: Ekku
    K8N Neo4 Ultra
    AMD 64 4200+
    2 Gb RAM
    2 x 250 Gb HDD (Maxtor)
    nVidia RAID (in mb)
    P.S. I wery SORRY with my poor language!

    I'm going to blame the nVRAID because I've seen issues with it in the past. If your motherboard has another non-nVidia RAID solution, use that instead. Using the nVidia SATA ports as BASE or JBOD is fine and dandy but RAIDing always had issues. It's not even a driver issue I think it's just instability. Latest drivers and even boxed drivers never helped. Granted, some will report success with their rig. But on a professional level I've seen nForce issues on different motherboards and different hard drives that had RAID disaster stories.
    Good luck and if you don't have another RAID solution, my suggestion would be to buy a dedicated RAID controller card.
    LPB

  • HELP NEEDED WITH ADDAPTER-DVI TO VGA.

    PLEASE ...HELP NEEDED WITH WIRING CROSS OVER....CAN YOU HELP WITH BACK OF PLUG CONNECTIONS...I SORTA UNDERSTAND THE PINOUTS BUT CANT MAKE AN EXACT MACH...WOULD LIKE TO BE 100% SURE...
    ......THIS ENSURES NO SMOKE!!!                                                                                           
    THE CARD IS AN ATI RADEON RX9250-DUAL HEAD-.........ADDAPTER IS DVI(ANALOG)MALE TO VGA(ANALOG)FEMALE.
    ANY HELP VERY MUCH APPRECIATED........ SEEMS YOU NEED TO BE ROCKET SCI TO ATTACH A BLOODY PICTURE...SO THIS HAS BEEN BIG WASTE OF FING TIME!

    Quote from: BOBHIGH on 17-December-05, 09:21:31
    Get over it mate !
    I find it easy t read CAPS...and if you dont like it ...DONT READ IT!
    And why bother to reply...some people have nothing better to do.
    Yes there chep and easy to come by...Ive already got a new one.
    All I wanted was to make a diagram of whats inside the bloody thing...it was a simple question and required a simple answer.
    NO NEED TO A WANKA !!
    I feel a bann comming up.
    Have you tryed Google ? really.. your question is inrelevant. No need to reply indeed.
    Why do you come here asking this question anyway ? is it becouse you have a MSI gfx card ? and the adapter has nothing to do with this ?
    You think you can come in here yelling.. thinking we have to put up with it and accept your style of posting. This is not a MSI tech center.. it's a user to user center.. Your question has nothing to do with MSI relavant things anyway's.
    Google = your friend.
    Quote from: BOBHIGH on 17-December-05, 09:21:31
    it was a simple question and required a simple answer
    Simple for who ? you (buying a new one) ? me ? we ?   .really...........
    Quote from: Dynamike on 16-December-05, 04:11:48
    1: There are allot of diffrent types of those adapters.
    If any of the mods have a problem about my reply.. please pm me.

  • Help needed for grouping.

    Hi,
        Help needed .
    I have an internal table having 6 .
    Ex :
    f1     f2    f3     f4    f5    f6
    a     aa    11    p1  10    10
    a     aa    12    p1  20    20
    b     aa    11    p2  30    30
    b     aa    12    p2  40    30
    Now i want to sum the fields f5 and f6 individually and need to display based upon the fields f1 and f4.
    To Display :
    f1     f2    f3     f4    f5    f6
    a     aa    11    p1  30    30.
    b     aa    11    p2  70    60.
    can anyone help me.How to do this..?
    Thanks

    Here you go
    DATA:
      BEGIN OF cur_tab OCCURS 0,
        f1        TYPE c,
        f2(2)     TYPE c,
        f3(2)     TYPE c,
        f4(2)     TYPE c,
        f5(2)     TYPE c,
        f6(2)     TYPE n,
      END OF cur_tab.
    DATA:
      BEGIN OF sum_tab OCCURS 0,
        f1        TYPE c,
        f4(2)     TYPE c,
        f5        TYPE p,
        f6        TYPE p,
      END OF sum_tab.
    DATA:
      BEGIN OF final_tab OCCURS 0,
        f1        TYPE c,
        f2(2)     TYPE c,
        f3(2)     TYPE c,
        f4(2)     TYPE c,
        f5(5)     TYPE c,
        f6(5)     TYPE c,
      END OF final_tab.
    START-OF-SELECTION.
      cur_tab-f1 = 'a'.
      cur_tab-f2 = 'aa'.
      cur_tab-f3 = '11'.
      cur_tab-f4 = 'p1'.
      cur_tab-f5 = '10'.
      cur_tab-f6 = '10'.
      APPEND cur_tab.
      cur_tab-f1 = 'a'.
      cur_tab-f2 = 'aa'.
      cur_tab-f3 = '11'.
      cur_tab-f4 = 'p1'.
      cur_tab-f5 = '20'.
      cur_tab-f6 = '20'.
      APPEND cur_tab.
      cur_tab-f1 = 'b'.
      cur_tab-f2 = 'aa'.
      cur_tab-f3 = '11'.
      cur_tab-f4 = 'p2'.
      cur_tab-f5 = '30'.
      cur_tab-f6 = '30'.
      APPEND cur_tab.
      cur_tab-f1 = 'b'.
      cur_tab-f2 = 'aa'.
      cur_tab-f3 = '11'.
      cur_tab-f4 = 'p2'.
      cur_tab-f5 = '40'.
      cur_tab-f6 = '30'.
      APPEND cur_tab.
      LOOP AT cur_tab.
        MOVE-CORRESPONDING cur_tab TO sum_tab.
        COLLECT sum_tab.
      ENDLOOP.
      LOOP AT sum_tab.
        READ TABLE cur_tab WITH KEY f1 = sum_tab-f1
                                    f4 = sum_tab-f4.
        IF sy-subrc NE 0.
          WRITE:/ 'Something went very wrong'.
          CONTINUE.
        ENDIF.
        MOVE-CORRESPONDING cur_tab TO final_tab.
        MOVE-CORRESPONDING sum_tab TO final_tab.
        APPEND final_tab.
      ENDLOOP.
      LOOP AT final_tab.
        WRITE:/1 final_tab-f1,
              AT 5 final_tab-f2,
              AT 10 final_tab-f3,
              AT 15 final_tab-f4,
              AT 20 final_tab-f5,
              AT 25 final_tab-f6.
      ENDLOOP.
    and the output
    a   aa   11   p1     30   30  
    b   aa   11   p2     70   60  

  • Help needed on installation of Oracle 9i on Sun Solaris 8

    Hey,
    Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
    Simon

    I have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
    Edited by: 916438 on Mar 31, 2012 5:55 PM

  • Help needed on installation of Oracle 9i EE on Sun Solaris 8

    Hey,
    Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
    Simon

    I have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
    Edited by: 916438 on Mar 31, 2012 5:55 PM

Maybe you are looking for