Help Needed: FERC (Federal Energy Regulatory Commission) in Utilities
Hi guys
Can anyone help me in finding suffice material for a good reading and understanding on FERC (which stands for Federal Energy Regulatory Commission)??? What I know is, this comes under Utility Industries.
Also, is there anyone worked in any Utility Industry earlier and working at present??
I will be working in a new project in Utility Industry and I need the info reg. <b>FERC requirements for Financial Reporting.</b>
Any help will be highly appreciated.
Thanks,
Naren.
Dan and Shawn,
We're struggling right in our Blueprint for an ECC 6.0 new implementation...struggling with the FERC reporting solution design to get the data setup for reporting. We're considering Infotype 27 for the FERC account strings...but really aren't sure of other options at this point.
How are you capturing the employee level FERC accounting on the HR/Time/Payroll side? This is the initial design for us...tying the employee/activity/cost center to FERC account for FI side handling/reporting.
Thanks for any help/suggestions/clarifications.
Jim
Similar Messages
-
FERC (Federal Energy Regulatory Commission) reporting in BW
Hello Guys,
Has anybody done the FERC reporting for an utility company in BW? I am aware that maybe I'll have to use FI-GL and something is CO maybe PCA cubes to get the FERC reports.
But not sure how to proceed with that. If somebody has some document or anything regarding this then please email it to [email protected]
Any help is appreciated.
Regards,
NinadDan and Shawn,
We're struggling right in our Blueprint for an ECC 6.0 new implementation...struggling with the FERC reporting solution design to get the data setup for reporting. We're considering Infotype 27 for the FERC account strings...but really aren't sure of other options at this point.
How are you capturing the employee level FERC accounting on the HR/Time/Payroll side? This is the initial design for us...tying the employee/activity/cost center to FERC account for FI side handling/reporting.
Thanks for any help/suggestions/clarifications.
Jim -
Federal Energy Regulatory Commission Reporting
Hello,
SAP’s standard FERC solution comes with extractors for sender & receiver cost objects and sender line item details on ECC tables FERC_D1 and FERC_D2. Is there standard BI content available for same? Also provide the datasources names.
Any help will be appreciated.
Regards,
SwatiHi Swati,
I have found only following 2 DS related to FERC, they are located under CO Controlling component in TA RSA6:
0FERC_D1 Sender and Receiver dril Sender and Receiver drill down data
0FERC_D2 Sender document drill down data
1st DS is using FM FERC_D1_EXTRACTOR for get the data. In the FM teh table FERC_D1 is being read.
2nd DS uses FM FERC_D2_EXTRACTOR. in this one table FERC_D2 is read.
cheers
m./ -
Need Case study of regulatory authority in DWH
I need Case study of regulatory authority / bank / Oil and Gas / Energy etc in DWH.
RegardsCould you please share the case study for muliti-org in oracle 11i E-business suite. Please see these links.
http://bit.ly/UAegf7
https://forums.oracle.com/forums/search.jspa?threadID=&q=MultiOrg&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein -
Troubleshooting help needed: My iMac keeps crashing and restarting with a notice: "Spinlock application timed out" What can I do?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports. -
help needed for writing query
i have the following tables(with data) as mentioned below
FK*-foregin key (SUBJECTS)
FK**-foregin key (COMBINATION)
1)SUBJECTS(table name)
SUB_ID(NUMBER) SUB_CODE(VARCHAR2) SUB_NAME (VARCHAR2)
2 02 Computer Science
3 03 Physics
4 04 Chemistry
5 05 Mathematics
7 07 Commerce
8 08 Computer Applications
9 09 Biology
2)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2) SUB_ID1(NUMBER(FK*)) SUB_ID2(NUMBER(FK*)) SUB_ID3(NUMBER(FK*)) SUBJ_ID4(NUMBER(FK*))
383 S1 9 4 2 3
384 S2 4 2 5 3
---------I actually designed the ABOVE table also like this
3) a)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2)
383 S1
384 S2
b)COMBINATION_DET
COMBDET_ID(NUMBER) COMB_ID(FK**) SUB_ID(FK*)
1 383 9
2 383 4
3 383 2
4 383 3
5 384 4
6 384 2
7 384 5
8 384 3
Business rule: a combination consists of a maximum of 4 subjects (must contain)
and the user is less relevant to a COMB_NAME(name of combinations) but user need
the subjects contained in combinations
i need the following output
COMB_ID COMB_NAME SUBJECT1 SUBJECT2 SUBJECT3 SUBJECT4
383 S1 Biology Chemistry Computer Science Physics
384 S2 Chemistry Computer Science Mathematics Physics
or even this is enough(what i actually needed)
COMB_ID subjects
383 Biology,Chemistry,Computer Science,Physics
384 Chemistry,Computer Science,Mathematics,Physics
you can use any of the COMBINATION table(either (2) or (3))
and i want to know
1)which design is good in this case
(i think SUB_ID1,SUB_ID2,SUB_ID3,SUB_ID4 is not a
good method to link with same table but if 4 subjects only(and must) comes
detail table is not neccessary )
now i am achieving the result by program-coding in C# after getting the rows from oracle
i am using oracle 9i (also ODP.NET)
i want to know how can i get the result in the stored procedure itsef.
2)how it could be designed in any other way.
any help/suggestion is welcome
thanks for your time --PradeeshWell I forgot the table-alias, here now with:
SELECT C.COMB_ID
, C.COMB_NAME
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID1) AS SUBJECT_NAME1
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID2) AS SUBJECT_NAME2
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID3) AS SUBJECT_NAME3
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID4) AS SUBJECT_NAME4
FROM COMBINATION C;
As you need exactly 4 subjects, the columns-solution is just fine I would say. -
Hi all help needed I have a canon 40D. I am thinking of buying a canon 6D.
But not sure that my lenses will work.
I have a 170mm/ 500mm APO Sigma.
A 10/20 ex Sigma HSM IF.
And a 180 APO Sigma Macro or do I have to scrap them and buy others.
ALL Help will be greatly received. Yours BRODIEIn short, I love it. I was going to buy the 5DMark III. After playing with it for a while at my local Fry's store where they put 5DMII, 5DMIII and 6D next to each other, using the same 24-105L lens, I decided to get the 6D and pocket the different for lens later.
I'm upgrading from the 30D. So I think you'll love it. It's a great camera. I have used 5DMII extensively before (borrowing from a close friend).
Funny thing is at first I don't really care about the GPS and Wifi much. I thought they're just marketing-gimmick. But once you have it, it is actually really fun and helpful. For example, I can place the 6D on a long "monopod", then use the app on the phone to control the camera to get some unique perspective on some scenes. It's fun and great. GPS is also nice for travel guy like me.
Weekend Travelers Blog | Eastern Sierra Fall Color Guide -
Help needed! Raid degraded again!
Hi!
Help needed! I hava made bootable RAID with two S-ATAII 250Gb HDD and its not working! Every now and then at bootup I get a message RAID -> DEGRADED... Must be seventh time! Rebuild takes its own time!
What am I doing wrong!
T: Ekku
K8N Neo4 Ultra
AMD 64 4200+
2 Gb RAM
2 x 250 Gb HDD (Maxtor)
nVidia RAID (in mb)
P.S. I wery SORRY with my poor language!I'm going to blame the nVRAID because I've seen issues with it in the past. If your motherboard has another non-nVidia RAID solution, use that instead. Using the nVidia SATA ports as BASE or JBOD is fine and dandy but RAIDing always had issues. It's not even a driver issue I think it's just instability. Latest drivers and even boxed drivers never helped. Granted, some will report success with their rig. But on a professional level I've seen nForce issues on different motherboards and different hard drives that had RAID disaster stories.
Good luck and if you don't have another RAID solution, my suggestion would be to buy a dedicated RAID controller card.
LPB -
HELP NEEDED WITH ADDAPTER-DVI TO VGA.
PLEASE ...HELP NEEDED WITH WIRING CROSS OVER....CAN YOU HELP WITH BACK OF PLUG CONNECTIONS...I SORTA UNDERSTAND THE PINOUTS BUT CANT MAKE AN EXACT MACH...WOULD LIKE TO BE 100% SURE...
......THIS ENSURES NO SMOKE!!!
THE CARD IS AN ATI RADEON RX9250-DUAL HEAD-.........ADDAPTER IS DVI(ANALOG)MALE TO VGA(ANALOG)FEMALE.
ANY HELP VERY MUCH APPRECIATED........ SEEMS YOU NEED TO BE ROCKET SCI TO ATTACH A BLOODY PICTURE...SO THIS HAS BEEN BIG WASTE OF FING TIME!Quote from: BOBHIGH on 17-December-05, 09:21:31
Get over it mate !
I find it easy t read CAPS...and if you dont like it ...DONT READ IT!
And why bother to reply...some people have nothing better to do.
Yes there chep and easy to come by...Ive already got a new one.
All I wanted was to make a diagram of whats inside the bloody thing...it was a simple question and required a simple answer.
NO NEED TO A WANKA !!
I feel a bann comming up.
Have you tryed Google ? really.. your question is inrelevant. No need to reply indeed.
Why do you come here asking this question anyway ? is it becouse you have a MSI gfx card ? and the adapter has nothing to do with this ?
You think you can come in here yelling.. thinking we have to put up with it and accept your style of posting. This is not a MSI tech center.. it's a user to user center.. Your question has nothing to do with MSI relavant things anyway's.
Google = your friend.
Quote from: BOBHIGH on 17-December-05, 09:21:31
it was a simple question and required a simple answer
Simple for who ? you (buying a new one) ? me ? we ? .really...........
Quote from: Dynamike on 16-December-05, 04:11:48
1: There are allot of diffrent types of those adapters.
If any of the mods have a problem about my reply.. please pm me. -
Help needed for grouping.
Hi,
Help needed .
I have an internal table having 6 .
Ex :
f1 f2 f3 f4 f5 f6
a aa 11 p1 10 10
a aa 12 p1 20 20
b aa 11 p2 30 30
b aa 12 p2 40 30
Now i want to sum the fields f5 and f6 individually and need to display based upon the fields f1 and f4.
To Display :
f1 f2 f3 f4 f5 f6
a aa 11 p1 30 30.
b aa 11 p2 70 60.
can anyone help me.How to do this..?
ThanksHere you go
DATA:
BEGIN OF cur_tab OCCURS 0,
f1 TYPE c,
f2(2) TYPE c,
f3(2) TYPE c,
f4(2) TYPE c,
f5(2) TYPE c,
f6(2) TYPE n,
END OF cur_tab.
DATA:
BEGIN OF sum_tab OCCURS 0,
f1 TYPE c,
f4(2) TYPE c,
f5 TYPE p,
f6 TYPE p,
END OF sum_tab.
DATA:
BEGIN OF final_tab OCCURS 0,
f1 TYPE c,
f2(2) TYPE c,
f3(2) TYPE c,
f4(2) TYPE c,
f5(5) TYPE c,
f6(5) TYPE c,
END OF final_tab.
START-OF-SELECTION.
cur_tab-f1 = 'a'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p1'.
cur_tab-f5 = '10'.
cur_tab-f6 = '10'.
APPEND cur_tab.
cur_tab-f1 = 'a'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p1'.
cur_tab-f5 = '20'.
cur_tab-f6 = '20'.
APPEND cur_tab.
cur_tab-f1 = 'b'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p2'.
cur_tab-f5 = '30'.
cur_tab-f6 = '30'.
APPEND cur_tab.
cur_tab-f1 = 'b'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p2'.
cur_tab-f5 = '40'.
cur_tab-f6 = '30'.
APPEND cur_tab.
LOOP AT cur_tab.
MOVE-CORRESPONDING cur_tab TO sum_tab.
COLLECT sum_tab.
ENDLOOP.
LOOP AT sum_tab.
READ TABLE cur_tab WITH KEY f1 = sum_tab-f1
f4 = sum_tab-f4.
IF sy-subrc NE 0.
WRITE:/ 'Something went very wrong'.
CONTINUE.
ENDIF.
MOVE-CORRESPONDING cur_tab TO final_tab.
MOVE-CORRESPONDING sum_tab TO final_tab.
APPEND final_tab.
ENDLOOP.
LOOP AT final_tab.
WRITE:/1 final_tab-f1,
AT 5 final_tab-f2,
AT 10 final_tab-f3,
AT 15 final_tab-f4,
AT 20 final_tab-f5,
AT 25 final_tab-f6.
ENDLOOP.
and the output
a aa 11 p1 30 30
b aa 11 p2 70 60 -
Help needed on installation of Oracle 9i on Sun Solaris 8
Hey,
Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
SimonI have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
Edited by: 916438 on Mar 31, 2012 5:55 PM -
Help needed on installation of Oracle 9i EE on Sun Solaris 8
Hey,
Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
SimonI have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
Edited by: 916438 on Mar 31, 2012 5:55 PM -
Help needed in Finding Download location for Sun One Portal 7
Hi,
help needed for finding download location for Sun ONE Portal 7. I tried to find in Oracle Download page ,
http://www.oracle.com/us/sun/sun-products-map-075562.html, But unable to find.
Please share the link for download location.
I am totally new in Sun ONE Portal.
Thanks,
Edited by: 945439 on Oct 5, 2012 3:41 AMtry edelivery.oracle.com under sun products.
-
Help needed in constructing a tree
Help needed in constructing a tree. I was wondering if some one can suggest me how to add messages in the second column for both the parent node and child elements.
I was able to create a tree succefully, but want to add some description in the second column for the first column elements, for both parent and child elements.
Please suggest me how to add the arrays to second column for parent and child nodes.
Solved!
Go to Solution.
Attachments:
Tree_fix.vi 15 KBThe Child Text parameter is the one you are searching for. It accepts a 1D string array for the following columns.
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it. -
Help needed on CD740 ???
Help needed on CD740 ? My CD740 is GREAT , well , it was great !!? The sound and general performance are wonderful , but , it now has a fault !!? Shock Horror !!
What can it be ?!!? Well , the display illumination has failed , as in , there isn't any !!? Have to use a torch to read it !!? Not good. Now , here's the thing , I want a phone number (UK zone) ?to talk to an actual human and I cannot find one !!? That is soooooo annoying !!? The unit is out of warranty so I want to repair this myself , no worries , I once worked for Philips in their pro studio equipment repair workshop so I know my way around black boxes !! I would like a service manual though so that I can get the case apart without damage. So , can anyone help me with a phone number , pretty please ?!!
Thanx.I tried compling servlet, but it is raising error
that coul not find package javax.servletWhat I did not mention... you need to add those JARs in the Classpath explicitly. You will find them in %TOMCAT_HOME%\common\lib. You atleast need to add servlet-api.jar to your Classpath. :)
Maybe you are looking for
-
Is it possible to save (or export) report output in XML format, it is ok with either WebI or DeskI report, here we are concerned about output format not what type of report we can use to produce the output in XML format. Thank you, Srini
-
Purchase requisition for production order
I have following question about subcontracting. I've just created two operations with the control key PP02 (external processing) when I released the production order two different purchase requisitions were created. I would prefer only one requisitio
-
My late 2010 Macbook Pro (*) started to have random kernel panics while normal use, but not triggered by something specific, after the 10.7.4 update. The panics became more and more frequent. Resetting PVRAM, repair disk, etc did not help. The kernel
-
Hi, everbody! I need explaining how system calculate coupons with index. Example: We have index-linked bonds. Time of paiying coupons - 2 time in year - 29/04/ and 29/10. Nominal value - 15 USD, percentage rate - 9%.. Issue start - 29/04/2006, end of
-
VAT for in-house training on non-VAT paying customer
Hi .. Newby here & hoping for a result ! I need to set up a sales order to cover the cost of some training provided in the UK for a customer billed-to in Sweden and therefore usually not subject to VAT. In this scenario, I am advised that VAT is paya