Help needed for WiFi connection problem

Hello
My wife's iPad2 with current iOS 8.3 sometimes will not connect to Wi-Fi - any ideas on how to correct the problem?
It's inconsistent!
Thanks for any thoughts about this.
David

If you want to do this in sql you've to use dynamic sql to select only columns having the data.
And you can always use end user tools like SSRS to display only columns having values by using expression for visibility property.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs
Visakh16-
Can you please help me on how can I achieve this using SSRS.
Thanks.
Hi Mutali,
Personally, I don't recommend using SSRS.
If you want to design a SSRS report,you should retireve all columns and specify column visibility for each column with following expression.
=IIF(Fields!SomeFieldValue.Value > 0, True, False) (Note:Supposing the data type of the field is INT).
You can refer to the solution as
Jingyang Li post above.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Similar Messages

Help needed for white screen problem with no shortcuts working on startup.

Im using a 20" mac OS X with leopard, When IMac turns on there is just a white screen with nothing happening so Iv tried using all of the shortcut command keys such as "command+R" with no success.
My main question is which cd will I need to get a hold of so i can completetly wipe the imac and start again fresh?
Any help will be appreciated.
Unsure of operating system being used as cant get onto Mac.

The install disc that shipped with the machine. Running Leopard and there's no recovery HD (CMD+R) feature. That only came with Lion.

Help needed Iphone 4 connection problems in windows 7

Device Manager in Windows 7 does not recognize iPhone 4 iOS 4.3.3 whether in normal mode or in recovery mode and not in DFU mode, but my second iPhone 4S is recognized immediately. I do not understand.

I would try another computer to verify if the iphones connector is damaged and thats why it dont connect

HT6162 My phone will not let me download the most recent update for iOS 7.1. It says I need a wifi connection and will not allow me to push the 'Download & Install' button, even when I am at home and my wifi is on. How do I fix this?

My phone will not let me download the most recent update for iOS 7.1. It says I need a wifi connection and will not allow me to push the 'Download & Install' button, even when I am at home and my wifi is on. How do I fix this?

Unfortunately yes, though technology would never move on if it kept to older standards and did not strive to do more.
The app store always gives you the option to use a previous version of the app IF it is available for your device.
Sorry but you are stuck without new hardware.
PJRS

New retina MacBook Pro - WiFi connectivity problems

Dear all,
I've recently purchased the new Haswell 13" retina MBP, and I'm having exactly the same WiFi connectivity problems the 2013 Airs had. I have a solid connection for a short time, and at irregular intervals it just drops out. All of my other devices are still connected and have no problems. I've tried with two different routers/modems, but the problem persists.
Is this a known problem - with hopefully a software fix in the forseeable future, or do I need to return the MacBook?
Many thanks in advance for your help,
Nic

I haven't got a Retina, but I do have the same wifi problem. And if you've looked at these forums, you'll see it's been going on for years and no one seems to have a handle on what the issue is. All I can say is if I were in your place I'd take it back and exchange it. You have the chance now, so take it.

I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

Kowhai wrote:
Lots of WIFI needs a username and password to get access. I guess you're lucky and yours is set up unsecured.
Normal secured WiFi requires only a password to get access. The password is used to encrypt traffic between your device and the WiFi access point. If whatever you are using requires a username as well then it is not simply normal secured WiFi. It might be a subscription WiFi service like GOGO, ATT, etc., or a service with authentication, i.e., college campus, etc. To help you out we need to know what you are using and what connection dialog you are being presented with. You don't have exactly the same problem as the original poster. He is having a problem entering a password into the password dialog that iOS presents when one tries to connect to a normal secured WiFi network. Could you clarify exactly which WiFi service you are using.

IPad WiFi Connection Problems - WiFi Symbol Appears With Full Bars but I Don't Get A Checkmark?

I was using the iPad one day and then all of a sudden it stopped connecting to the internet. The network at this hotel is very good and I've asked them about their router so it is not the router's problem.
I go to the Settings and tap on Wi-Fi then I tap on the hotel network. After a few seconds, it says the network name beside the Wi-Fi tab and it gives me the WiFi symbol showing 3 bars. But then I never get the checkmark or tick saying everything is connected. I try going online and it says the iPad is not connected to the internet. I've tried an iPhone and it connected and got a checkmark in a few seconds. I've talked to the front desk and he took out his phone and showed me that he could connect, he even opened a page without any problems at all.
I've been trying to find a solution for this for a long time. I've been searching Google over and over again. I turned Airplane Mode on for 1 minute, I've tried Resetting my Network settings, I've tried forgetting the network and reconnecting again, I've tried removing all restrictions from the iPad, I've rebooted the iPad A LOT, etc.
So this is my problem for people who don't want to read the whole message:
1. I can't connect to the internet with the iPad
2. It shows the WiFi symbol saying its connected but I never get the checkmark or tick.
3. It's not the router problem.
4. I've tried other networks and it doesn't work. It just keeps on showing that loading circle right beside the network name.
5. Do any of you know what this problem is? Or do you have a solution?
Thank you for reading this and have a great day

Since you are in a hotel, some of these are not applicable.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Iconia A1-830 has a Wifi connection problem when it out to 3-5 meters

I bought Aser Iconia A1-830 in BestBuy and after 10 days I found out the Wifi Connection problem. If you stay close to router (1-3 meters) the WiFi signal is Good (not excellent). If I go to another room - Wifi connection is Poor or disabled. I changed it for another one (the same model). The second model was perfect only 1.5 months and now it has the same wifi connection problem. Can somebody help me? Maybe the problem in my router, but why it worked 1.5 months?

I'm not sure what the real reason is, but I do know it's a it of a hassle getting the connectors pushed back on. They are very tiny and take some pressure to install and I could easily imagine a wire not completely tied in place moving enough to work loose. Let us know how yours comes out.

N95 8BG "WiFi Connection problems" and "Web: no ga...

Like many users, I could not get my new Nokia (N95 8GB) to work with my WiFi. After many attempts, using the various ideas posted, I came up with a solution that works reliably for me.
First lets deal with "WiFi Connection problems"
Menu/Tools/Settings/Connection/Wireless LAN
'Show WLAN availability' = 'Yes'
'Scan for networks' = 'Every 5 minutes'
Some users have suggested choosing 'Advanced Settings' from the 'Options' menu, changing 'Automatic configuration' to 'Disabled' and the either setting 'RTS threshold' to '2346', or setting 'Power saving' to 'Disabled'. I tried both of these but they did not make any difference in my case. However they may make a difference for you, hence their inclusion here.
Menu/Tools/Settings/Connection/Access Points
Choose 'New access point' from the 'Options' menu
'Data bearer' = 'Wireless LAN'
'WLAN network name' = If your network is set to broadcast its SSID, use 'Search for networks' then select your network from the list, otherwise use 'Enter manually' and type in the SSID.
'Connection name' = anything you like, but I use the SSID
'Network status' = not sure about this maybe someone can confirm, but I think if the SSID is broadcast then it is 'public', otherwise it is 'private'.
'WLAN network mode' = match this to your access point configuration. Mine is set to 'Infrastructure', so I do not cover the ad-hoc scenario here.
'WLAN security mode' = again I am using WEP so have not covered other scenarios.
'WLAN security settings' = these should match you access point configuration.
'Homepage' = whatever you like. I use 'http://www.google.co.uk', just so that when I start browsing I get something reliable, useful, and dependable. If Google fails to appear it usually means there is something wrong with your config.
Now lets handle the dreaded "Web: no gateway reply"
Menu/Tools/Settings/Connection/Access Points
Scroll down to highlight the new access point and choose 'Edit' from the 'Options' menu. Now choose 'Advanced settings' from the 'Options' menu.
Assuming you network used IPv4, which most do in my experience, select 'IPv4 settings'. I don't know about IPv6, and don't use a proxy so these are not covered.
The values you enter in 'IPv4 settings', depend upon your network/router settings, and whether you have a DHCP server or not.
Assume your a router IP Address, on the LAN side, is 192.168.0.1, and that it has a DHCP server set to serve addresses in the range 192.168.0.64 to 192.168.0.192, using subnet 255,255,255,0. Since the mobile does not seem able to get an IP Address from the DHCP server we give it a static address 192.168.0.55. Notice this is outside the range sereved by te DHCP server to avoid conflicts.
We end up with:
'Phone IP address = '192.168.0.55'
'Subnet mask' = '255,255,255,0'
'Default gateway' = '192.168.0.1'
'DNS address' = 'user defined'
'Primary DNS address' = '192.168.0.1'
'Secondary DNS address' = '0.0.0.0'
I used something similar and was at last able to browse the web via wifi.
I hope all of the above helps someone out there.

I have just experienced this problem having been using the WiFi network for months without problems. I tries all the suggestions on these forums including the power settings, turning off WEP, and the fixed IP suggestion and none worked. I even reinstalled the firmware and reconfigured everything. It turned out to be the router. I had rebooted it several times to no effect but the DHCP always gave the N95 the same IP address lease. So I changed the range of IP addresses the DHCP could lease and restarted the N95. It got a new IP and was back working again.
If at first you don't succeed, try again. Then quit. There's no use being a damn fool about it.
-- W.C. Fields

Chronic Wifi Connectivity Problems

My late 2011 MBP has been having chronic wifi connectivity problems ever since I got it, although I have really only begun to see the full extent. I bought it in late April 2012, so I am still covered by my one year warranty.
Problems are as follows:
Will not connect to certain areas. I am okay in my dorm, at my house, and several friend's houses, but it won't connect anywhere else on campus. (You can imagine that this is a problem.)
I am running bootcamp on it, and the Windows side has no issues with connectivity.
About every month, like clockwork, the wifi stops working altogether. It won't give me an IP address and the only solution is to clean reinstall OS. Which is getting very annoying.
Additional Information:
Within the first 60 days of having my mac, I had connectivity problems at a friend's house. Still covered by Applecare, they fixed my problem by renewing the DHCP lease and some other things that I can't remember.
I took the MBP to a Genius Bar when the wifi completely went out and the only solution they had was to clean reinstall the OS. This involves completely wiping the harddrive and reinstalling, not reinstalling over top of what is already there.
As you can imagine, I am extremely frustrated having to reinstall and restore my machine. I am wondering if these problems are preventable, fixable, or if my computer has a manufacturing problem that can be fixed under my warranty.
Thank you for your help!

Hey RJS568999,
I found that if you can connect to your Wi-Fi router, but are having issues with webpages loading, sending or receiving email, etc., Apple recommends you use Wireless Diagnostics, included with OS X Mountain Lion v10.8.4 and later.
You can read more about it here:
About Wireless Diagnostics
http://support.apple.com/kb/HT5606
Cheers,
Delgadoh

Wifi connection problem better with full battery

I have a macbook air I bought in 2012 (1.7 GHz Intel Core i5, 4 Gb memory) I know there are a lot of problems with other users complaining of wifi connecting problems. I have experienced the same problem but only when my battery charge is less than 98%. After my macbook has been on sleep for several hours, and has not been plugged in, the battery slowly drains and when I try to use it, it refuses to connect to any wifi connection. But as soon as I charge it up to 100% then it automatically connects, without having to restart it. Just wondering if anyone else has experienced this and if there has been any other answers from Apple regarding a potential fix for this issue....

Try this and it should reset your printer. On the front panel press the * and the # key at the same time, then press 1,2,3 in that order on the touch screen touch the left arrow button twice which will take you to the reset menu then press ok. Press the left arrow two more times and it should say "semi-full reset" press ok and this will be performed. The printer should shut down and will have to be turned back on, it will ask you for your language and your country the printer should initialize itself and should print an alignment page. NOTE: any speed dial numbers will be lost when you perform the semi-full reset.
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**

WRT54GS Access Restriction for WiFi Connected Devices

I have the WRT54GS v4 running with the latest Firmware Version: v1.06.3 -- I am attempting to add Access Restrictions for a few MAC addresses and IP addresses (my kids iPod Touch and laptop).
I am simply wanting to deny total internet access from 9pm to 7am. I have gotten it to work but ONLY for computers that are actually plugged into the router (cat 5 internet cables). All the computers/devices that connect to the router via wifi do not seem to be restricted at all. I am thinking this is an issue with the router in that it ONLY seems to apply the Access Restriction rules to those devices that are actually directly connected by hardwire.
Has any one else noticed this issue for WiFi connected devices? Access Restrictions do not seem to apply to WiFi connected devices.
Please help -- I would hate to have to buy another router.

Are you sure you have enter the correct MAC address or IP address? Wired connections use different MAC and IP addresses then wireless connection...

HP deskjet 2540 All-In-One, wifi connection problem

When I first installed my HP DJ2540 All-In-One, I changed the password for WIFI connection. Now I upgraded my computer from W 7 to W 8 and not able to have WIFI connection to printer. It is asking for Nework security key. I don't know what it is! please help me.

Hello there @tnkhayi
Welcome to the HP Community
I read your post about how you're looking for your Network Security Key. I wanted to post you a document that should help you look for it.
Please check out this link
I Can't Find the WEP or WPA Key or Password for My Wireless Network
I hope that helps!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Help needed for writing query

help needed for writing query
i have the following tables(with data) as mentioned below
FK*-foregin key (SUBJECTS)
FK**-foregin key (COMBINATION)
1)SUBJECTS(table name)
SUB_ID(NUMBER) SUB_CODE(VARCHAR2) SUB_NAME (VARCHAR2)
2           02           Computer Science
3           03           Physics
4           04           Chemistry
5           05           Mathematics
7           07           Commerce
8           08           Computer Applications
9           09           Biology
2)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2) SUB_ID1(NUMBER(FK*)) SUB_ID2(NUMBER(FK*)) SUB_ID3(NUMBER(FK*)) SUBJ_ID4(NUMBER(FK*))
383           S1      9           4           2           3
384           S2      4           2           5           3
---------I actually designed the ABOVE table also like this
3) a)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2)
383           S1
384           S2
b)COMBINATION_DET
COMBDET_ID(NUMBER) COMB_ID(FK**) SUB_ID(FK*)
1               383          9
2               383          4
3               383          2
4               383          3
5               384          4
6               384          2
7               384          5
8               384          3
Business rule: a combination consists of a maximum of 4 subjects (must contain)
and the user is less relevant to a COMB_NAME(name of combinations) but user need
the subjects contained in combinations
i need the following output
COMB_ID COMB_NAME SUBJECT1 SUBJECT2      SUBJECT3      SUBJECT4
383     S1     Biology Chemistry      Computer Science Physics
384     S2     Chemistry Computer Science Mathematics Physics
or even this is enough(what i actually needed)
COMB_ID     subjects
383           Biology,Chemistry,Computer Science,Physics
384           Chemistry,Computer Science,Mathematics,Physics
you can use any of the COMBINATION table(either (2) or (3))
and i want to know
1)which design is good in this case
(i think SUB_ID1,SUB_ID2,SUB_ID3,SUB_ID4 is not a
good method to link with same table but if 4 subjects only(and must) comes
detail table is not neccessary )
now i am achieving the result by program-coding in C# after getting the rows from oracle
i am using oracle 9i (also ODP.NET)
i want to know how can i get the result in the stored procedure itsef.
2)how it could be designed in any other way.
any help/suggestion is welcome
thanks for your time --Pradeesh

Well I forgot the table-alias, here now with:
SELECT C.COMB_ID
, C.COMB_NAME
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID1) AS SUBJECT_NAME1
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID2) AS SUBJECT_NAME2
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID3) AS SUBJECT_NAME3
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID4) AS SUBJECT_NAME4
FROM COMBINATION C;
As you need exactly 4 subjects, the columns-solution is just fine I would say.

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with re

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with reddish cast and loss of detail
System: Windows 7
Adobe CS5
Printer: Epson Stylus Photo 1400
Paper: Inkjet matte presentation paper with slight luster
Installed latest patch for Adobe CS5
Epson driver up to date
After reading solutions online and trying them for my settings for 2 days I am still unable to print what I am seeing on my screen in Adobe CS5. I calibrated my monitor, but am not sure once calibration is saved if I somehow use this setting in Photoshop’s color management.
The files I am printing are photographs of dogs with lots of detail I digitally painted with my Wacom tablet in Photoshop CS5 and then printed with Epson Stylus 1400 on inkjet paper 20lb with slight luster.
My Printed images lose a lot of the detail & come out way to dark with a reddish cast and loss of detail when I used these settings in the printing window:
Color Handling: Photoshop manages color, Color management -ICM, OFF no color adjustment.
When I change to these settings in printer window: Color Handling: Printer manages color. Color management- Color Controls, 1.8 Gamma and choose Epson Standard it prints lighter, but with reddish cast and very little detail and this is the best setting I have used so far.
Based on what I have read on line, I think the issue is mainly to do with what controls are set in the Photoshop Color Settings window and the Epson Printer preferences. I have screen images attached of these windows and would appreciate knowing what you recommend I enter for each choice.
Also I am confused as to what ICM color management system to use with this printer and CS5:
What is the best ICM to use with PS CS5 & the Epson 1400 printer? Should I use the same ICM for both?
Do I embed the ICM I choose into the new files I create?
Do I view all files in the CS5 workspace in this default ICM?
Do I set my monitor setting to the same ICM?
If new file opens in CS5 workspace and it has a different embedded profile than my workspace, do I convert it?
Do I set my printer, Monitor and PS CS5 color settings to the same ICM?
Is using the same ICM for all devices what is called a consistent workflow?
I appreciate any and all advice that can be sent my way on this complicated issue. Thank you in advance for your time and kind help.

It may be possible to figure out by watching a Dr.Brown video on the subject of color printing. Adobe tv
I hope this may help...............

Help needed for WiFi connection problem

Similar Messages

Maybe you are looking for