Help Needed!!! I am not able to checkout the code base

I am getting following error after some time.
REPORT of '/svn/opensource/!svn/vcc/default': Could not read response body: An existing connection was forcibly closed by the remote host. (http://opensource.adobe.com)
And if i try to take update by manually creating the folder structure, at some folders it is asking to authenticate.
Kindly help. Thanks in advace.
Regards,
Ankur Kumar.

Dear Ahmed,
Source is your ODS only.
But the Change in Key Fields is the secret here.
Generally if the Key Field combination is same then the records will be overwritten in the ODS.
Regards,
Ramkumar.

Similar Messages

Help needed: "Logic was not able to complete the download"

I purchased Logic Pro 9 today from App store. Downloaded and installed the software. After installation & startup Logic started to download 2GB of additional content. This download was interrupted by the message "logic was not able to complete the download". I trashed Logic, redownloaded and reinstalled it several times from App store, always gives same message after startup. Doesn't even start to download basic content again, just gives the message. After hitting "ok" Logic just quits. This is extremely frustrating and I have no idea what to do about this.
I would very much appreciate any advice about how to solve this problem!

I start with the same problem but it ends differently.
I purchased Logic Pro 9 today from App store. Downloaded and installed the software. After installation & startup Logic started to download
the basic content. Upon startup the program already seemed weird, but it started and finished the basic content.
By weird I mean all I get on my screen is the Logic menu bar and the text is yellow instead of black. To top it all up, the text from the menus is missing and all I get is empty boxes.
I have deleted it and reinstalled from the app store to ensure a new clean installation but still the problem persists.
I have checked all your above points as well and none seem to work would be grateful for any help.
Cheers

Not able to display the Installation Base of once it unassigned from upper level Installation IBase.

Hi All
I am working on IBase scenario for my client, I am new to the IBase scenario. Here we are creating installation base for two to five levels of product.
Once we create IBase for lower level then this IBase is inserted in upper level IBase. Like this we assign all levels based on product.In some cases we need to unassign any of IBase from its upper level IBase. When it is unassigned we are not able to display the IBase which unassigned. When it is unassigned from upper level how come system not able to display this IBase. If we speak functionally the part (IBase) which is unassigned should be valid to assign in any other upper level IBase in feature.
The error I am getting for above is
Serial number XXXXXXX for material XXXXXXX does not exist in any IBase
Message no. IQ122
Diagnosis
Serial number BMF3000106 for material S24-D5022-C100-6 does not exist in any installed base on 31.03.2015 at 10:22:09.
System Response
The system cancels processing.
Hi experts please suggest.
Regards
Kesava

Hello Kesava
Can you please explain in detail what exactly you are trying to do while assigning and unassigning Ibase.
Regards
Naresh

New user. cannot input start up code because keyboard will only let me use numbers only. Since the code requires both numbers and letters, I'm not able to complete the code and install the program

I need to do the finial step to activate elements 12. For some reason my keyboard will not allow me to print letters, only numbers. Since the code that is required for the final step requires both numbers and letters I'm not able to complete .

If the code has letters it's not a serial number, but a redemption code that you use to get a serial number:
Redemption Code Help

Remote Object - not able to get the returned value from java method

     Hi ,
I am developing one sample flex aplication that connects to the java code and displays the returned value from the
java method in flex client. Here I am able to invoke the java method but not able to collect the returned value.
lastResult is giving null . I am able to see the sysout messages in server console.
I am using flex 3.2 and blazeds server and java 1.5
Here is the code what I have written.
<?xml version="1.0" encoding="utf-8"?><mx:WindowedApplication xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" backgroundColor="#FFFFFF" initialize="initApp()">
<mx:Script><![CDATA[
import mx.controls.Alert;
import mx.binding.utils.ChangeWatcher;
import mx.rpc.events.ResultEvent;
import mx.messaging.*;
import mx.messaging.channels.*
public function initApp():void {
     var cs:ChannelSet = new ChannelSet();
     var customChannel:Channel = new AMFChannel("my-amf", "http://localhost:8400/blazeds/messagebroker/amf");     cs.addChannel(customChannel);
     remoteObj.channelSet = cs;
public function writeToConsole():void {      remoteObj.writeToConsole(
"hello from Flash client");
      var returnedVal:String = remoteObj.setName().lastResult;     Alert.show(returnedVal);
//[Bindable]
// private var returnedVal:String;
]]>
</mx:Script>
<mx:RemoteObject id="remoteObj" destination="sro" />
<mx:Form width="437" height="281">
<mx:FormItem>
</mx:FormItem>
<mx:Button label="Write To Server Console" click="writeToConsole()"/>
</mx:Form>
</mx:WindowedApplication>
Java code
public
     public SimpleRemoteObject(){
          super();     }
class SimpleRemoteObject {
     public void writeToConsole(String msg) {          System.out.println("SimpleRemoteObject.write: " + msg);     }
     public String setName(){          System.
out.println("Name changed in Java");
          return "Name changed in Java";
And I have configured destination in remote-config.xml
<destination id="sro">
   <properties>
    <source>SimpleRemoteObject</source>
    <scope>application</scope>
   </properties>
</destination>
Please help me .

You are not able to get the returned value because if you see the Remote object help you will realise you have to use result="resultfn()" and fault = "faultfn()"
In this you define what you wish to do.
More importantly in the remote object you need to define which method you wish to call using the method class like this
<mx:RemoteObject id="remoteObj" destination="sro" result="r1" fault="f1" >
     <Method name="javaMethodName" result="r2" fault="f2"/>
<mx:RemoteObject>
r2 is the function where you get the result back from java and can use it to send the alert.

Not able to get the data in PE51

Dear Freinds,
I have copied similar to the standard in IN01 , in the Pe51> Windows i have kept under W1 all the wage types which comes under earnings and when i execute the payslip i.e in the simulation run and when i view the form i can see
only the wage types but i dont find the correspnding amounts agains each wage type. Please could any one help me
why iam not able to get the amount agains the wge type?
regards
divya.

Hi,
I think u might have done some mistakes while configuring PE51 in cumulation ID ..........
First of all as Siki said check ur master data whether the WT has given in IT 0008 and corresponding amounts entered to the resp WT. if it is ok then check the pe51 config once........
go to pe51 give ur form name and select cumulation IDs go to change mode and double click on Earnings and see whether the data is maintained in this manner or not .......
Table = RT , ID = your WT code , MS = + (sign) , Dsplit = * (sign), rest all coulumn leave blank ........ save it and then again run the payrl in Live mode and see the Pay slip.........
If any problem Pls let us know.... and see other gurus post also.
Regards,
Prashant

Photos app in my mac is not able to open the iPhoto library from my external hard disk.

I am using iMac (21.5-inch, Late 2013) OS 10.10.3. i have 2 iPhoto library one on my Mac HD and the other on my External HD which i primarily use and which has all the latest photos in it. Now with the new update to photos app in Mac i am not able to open the iPhoto library from my external HD. I get the following error message please help.

i am not able to open the iPhoto library from my external HD
How is the external HD formatted? Is the filesystem MAcOS Extended (Journaled) as necessary?
Is theHD directly connected or by a networked connection?
Have you tried to set the "Ignore Ownership on this volume" flag?
See how to prepare the drive for storing an iPhoto Library on it in this document: iPhoto: Sharing libraries among multiple users
Which version of iPhoto created the library? If it was iPhoto 7.1.2 or earlier, download and run the iPhoto Library upgrader.
iPhoto '11 or later: About the Library Upgrader - Apple Support

My little cousin scratched my i tunes gift card with a key and now I am not able to decipher the entire code. Is there any way of still being able to redeem my i tunes gift card?

My little cousin scratched my i tunes gift card with a key and now I am not able to decipher the code on the back. Is there any way of still being able to redeem the gift card?

This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes forums.
Answering quickly, though, see:
http://support.apple.com/kb/TS1292
Regards.

Not able to open the sql ..

hi.
i am facing one problem.
plz have a look on below image.
i am not able login into the data bases..
any has seen this type of problem.
i all ready search in google ...
They provide some solutions
1) Go to sql view see the data base and then start the Server.
i tried above one while starting error is coming unable to start the sql
2) sql services i started...
Any information plz update me.
and one more question
how can i take the sql data base backup without touching the sql i mean without login into the sql
and how can i restore it..

Hi Srinivas,
Please check the server name and instance details. Also try to connect the server using IP address.
You can use windows scheduler for backup and restore without log in to the SQL Server.
Regards
Neslin

I have changed my Apple ID name and I want to change it on iCloud, however I am not able to delete the previous account because I need to turn off the Find my iPhone - and for that I need to log in with the old name and that is not working. Help anyone?

I have changed my Apple ID name and I want to change it on iCloud, however I am not able to delete the previous account because I need to turn off the Find my iPhone - and for that I need to log in with the old name and that is not working. Help anyone?

Hey tulgan,
This link will provide information on what to do after you change your Apple ID:
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796
Welcome to Apple Support Communities!
Take care,
Delgadoh

I have inadvertently infringe copyright on facebook and they have subsequently barred me from uploading any more videos. The question I need answered is ( and not able to find the answer on any of you help pages)..... Do the following have free copyright

I have inadvertently infringe copyright on facebook and they have subsequently barred me from uploading any more videos.
The question I need answered is ( and not able to find the answer on any of you help pages).....
Do the following have free copyright to publish on facebook and U Tube?
1.Garage band sounds?
2.Slide show...Sample music and Theme music?
3.iMovie...iMovie sounds and iLife sounds ie.Medal Ceremony and Memorial etc?
I note one can publish to shared net places directly from iMovie so one assumes these are copyright free for non-profit making and non-comercial use.
It is impossible to contact apple direct.No email address.We put our selves at risk without this knowledge and like applemac, facebook will not communicate direct.Will applemac please take responsibility for copyright/the above that they are all too willing to sell to us but not support us with that knowledge.
I have Mac OS X Snow Leopard version 10.6.2 (2009 bought in 2010)

Thank you Klaus1.The large font, I copied and pasted from my mail box.I'm visually impaired...not to a huge degree but it helps to use the large font.I believe you are right about the copyright on the imac stuff but if facebook decide otherwise, you have to reply electronically to their challenge.If you can't provide a reference directly from the copyright owner then they remove the video.I believe this is a programmed response and no human is involved which now makes it impossible for me to get my video uploading restored.They detect added soundtrack automatically and then challenge.There are many others in the same boat and facebook will not communicate.They have various discussion sites on which I have left messages including Mark Zuckerbergs own facebook but I don't think anyone from facebook ever reads them.I intend to start a second facebook which I can use purely to get my videos uploaded as a lot of my friends enjoy them BUT don't want fall foul of their programming again.If only iMac would put something on the net to this effect.I think it is so unfair that with modern technology it is impossible to contact these large conglomerates personally and receive an email response.I tried emailing [email protected] but I got a failure notice.If you have any ideas on how to get verification from apple direct, I would be very grateful.Thank You.

Need help with imovie photos extension. I am not able to view the editing tools no matter what I do!!!! Help please ASAP

I Have read a lot of tutorials or whatever but Im not able to view the editing tools from imovie in the photos app. I have tried the trimmer thing and the yellow outline does appear but the only options available are "play, trim or cancel". I really really want to use the filters and stuff so please help me if you can!
Thanks!

Well, everything that you have bought with her Apple ID prior to getting your own Apple ID is forever hers. Apple will not transfer content from one ID to another. But in the case of the Mac, contact iTunes Customer Service and request that they send your issue to the Account Security Team and ask that the Mac be released form your mother's account so you may register it with your account. Then you can accept the iLife apps into your account for any future updates.
iTunes Support -
http://www.apple.com/support/itunes/

Not able to checkout Files using Java Code and SAP BAPI from DMSServer

Hi
Able to download / checkout the files using T-Code SE37 (BAPI_DOCUMENT_CHECKOUTVIEW2).
But when same RFC is executed from Java, it alsways says -
Message ::::::::Document LGL/10000000003/000/00 does not exist
My inputs in Java Code is as below -
import java.io.*;
import java.util.*;
import com.sap.mw.jco.*;
//CREATED ON - 10-APRIL-2010.
public class BapiDocCheckOutview {
     public static void main(String args[]){
          try{
               if(mConnection!=null){
JCO.Repository repository=new JCO.Repository("AraSoft",mConnection);
JCO.setMiddlewareProperty("jco.middleware.allow_start_of_programs", "SAPFTPA");
JCO.Function function=repository.getFunctionTemplate("BAPI_DOCUMENT_CHECKOUTVIEW2").getFunction();
                    //End of get function.
                 System.out.println("Before execution1");
                 if(function !=null){
               JCO.Field DOCUMENTTYPE = function.getImportParameterList().getField("DOCUMENTTYPE");
                DOCUMENTTYPE.setValue("LGL");
                JCO.Field DOCUMENTNUMBER = function.getImportParameterList().getField("DOCUMENTNUMBER");
                DOCUMENTNUMBER.setValue("10000000003");
                JCO.Field DOCUMENTPART = function.getImportParameterList().getField("DOCUMENTPART");
                DOCUMENTPART.setValue("000");
                JCO.Field DOCUMENTVERSION = function.getImportParameterList().getField("DOCUMENTVERSION");
                DOCUMENTVERSION.setValue("00");
                JCO.Field GETSTRUCTURE = function.getImportParameterList().getField("GETSTRUCTURE");
                GETSTRUCTURE.setValue("1");
JCO.Field GETCOMPONENTS = function.getImportParameterList().getField("GETCOMPONENTS");
             GETCOMPONENTS.setValue("X");
JCO.Field ORIGINALPATH = function.getImportParameterList().getField("ORIGINALPATH");
              ORIGINALPATH.setValue("C:
TEMP
DMS_");
JCO.Field GETHEADER = function.getImportParameterList().getField("GETHEADER");
                      GETHEADER.setValue("X");
JCO.Field PF_FTP_DEST=function.getImportParameterList().getField("PF_FTP_DEST");
          PF_FTP_DEST.setValue("SAPFTPA");
//JCO.Field PF_HTTP_DEST=function.getImportParameterList().getField("PF_HTTP_DEST");
     //PF_HTTP_DEST.setValue("SAPHTTPA");
                      System.out.println("Here Setting Values Inside Structure ::DOCUMENTFILE");
JCO.Structure DOCUMENTFILE=function.getImportParameterList().getStructure("DOCUMENTFILE");
DOCUMENTFILE.setValue("1","ORIGINALTYPE");
DOCUMENTFILE.setValue("WWI","WSAPPLICATION");
DOCUMENTFILE.setValue("ZHCL_CS","STORAGECATEGORY");
DOCUMENTFILE.setValue("E0DF7893E2BD5DF19C07001517B4A299","APPLICATION_ID");
DOCUMENTFILE.setValue("E0DF7893E2BD5FF19C07001517B4A299","FILE_ID");
DOCUMENTFILE.setValue("X","CHECKEDIN");
DOCUMENTFILE.setValue("X","ACTIVE_VERSION");
                        //DOCUMENTFILE.setValue("LGL","DOCUMENTTYPE");
                        //DOCUMENTFILE.setValue("10000000003","DOCUMENTNUMBER");
                        //DOCUMENTFILE.setValue("000","DOCUMENTPART");
                        //DOCUMENTFILE.setValue("00","DOCUMENTVERSION");
                      //JCO.Field GETCOMPONENTS = function.getImportParameterList().getField("GETCOMPONENTS");
                      //GETCOMPONENTS.setValue("X");
                      //JCO.Field GETHEADER = function.getImportParameterList().getField("GETHEADER");
                      //GETHEADER.setValue("X");
                    mConnection.execute(function);
If anyone have an Idea on what I have missed out...
Please do advice me.
Thanks
Prashant

Hi
To update in the initial requirement, I have added (prefixed, zeroes) in Document No., doing that, now the application is able to find the document, but not able to transfer the same from DMS Server to my local Machine, always giving the following error -
Type ::::::::E
Message ::::::::File d:\dms\z_IPI_PRASHANT01.doc cannot be created
Please let me know, if some services needed to checked in SAP System or some more information to be provided in RFC.
Thanks
Prashant
Dear Experts
Any advice on this. Still not able to download the documents from DMS Server.
I have also added few more code in my Java program -
     private int use_sapgui;
     public void setSapGui(int use_sapgui){
          use_sapgui = 2;
PLease help !!
Regards
Edited by: Prashantroy on Sep 26, 2011 12:49 PM
Hi,
Further to my earlier Mail, while checking the Trace suing SM59 in ECC System I got the following Error -
Trace file opened at 20111010 142232 India Standard Time, SAP-REL 701,0,134
======> cannot open SAPGUI
ABAP Programm: SAPLSYSE (Transaction: )
User: IPI_PRASHANT (Client: 220)
Destination: SAPFTP (handle: 3, , )
SERVER> RFC Server Session (handle: 1, 43220900, {5D1DF3E0-ACBD-F11F-8EA0-00A0D1
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: java)
SERVER> Called function module: RFC_START_PROGRAM
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1742
FUNCTION: 'exec_sapgui'
cannot open SAPGUI
PROG =sapftp erpdev sapgw00 43232164 IDX=4
Can someone help me in getting this sorted out.
Thanks N Regards
Edited by: Prashantroy on Oct 10, 2011 2:32 PM

Not able to view the content in Microsoft help viewer (MS VS 2012)

Hello Team,
I'm Rahul from Daimler-Chrysler, Bangalore location. I’m the IT Engineer for Daimler-Chrysler.
We tried many settings in IE but still not able to resolved. So i need more expert help.
My customer having one issue-
# User is not able to view the content in Microsoft help viewer (MS VS 2012), below is the error: Its opening in HTML Format.
So please help me. Contact no- +91-9972004298. and personal id:- [email protected]/[email protected]
I call you to Microsoft customer care they advice me to ASK Question. Please help me, I'm waiting for your reply.
Thanks,
Rahul B. Patil.
+919972004298.

Hi Sri,
it looks that your HANA instance has been created before we enabled the web-based development workbench. Some privileges are missing, we can't migration those existing instances.
Nevertheless you can ignore the error above. You can see all the content inside your instance "smstest1".
If you want to get rid of the cosmetic issue. You might delete this instance and create a new one.
Best regards
Xu

Replacement Needed. This iphone is not able to complete the activation process and needs to be replaced. Please visit your nearest apple store or authorized service center.

Probably will never ever think of buying a locked phone from AT&T cause its one of the worst system integrations ever that these companies could think of.
The entire problem started when I put in a request with at&t to unlock my iphone 4s (ios7) which did get approved. I performed the entire instructions they asked me to do, which is to backup and restore. After doing those instructions my iphone gave me an error message below
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
Basically saying that at&t hasn't still unlocked the iphone which a really helpful apple executive was able to confirm. I initiated another unlock process from at&t in order to unlock the iphone, just to be sure that its not something wrong from my end. The nice at&t lady stayed on chat with me to unlock the iphone step my step while I was calling the apple tech too. And the apple tech confirmed again that the iphone is locked to at&t.
Now, just a few minutes ago I tried another restore to see if any progress is being made and to my surprise I got an error message saying
Replacement Needed. This iphone is not able to complete the activation process and needs to be replaced. Please visit your nearest apple store or authorized service center.
I feel like I am just going around these two different "money hogger" companies which set certain rules and regulations to screw a regular phone buyer. I purchased this iphone in USA and trying to unlock in India, is it really this hard to simply unlock a device.
For now I am going to try to call a apple office in india (apprently we don't have very many out here) and see if they can help me. But any other assistance regarding unlocking an iphone 4s would be helpful. I have however, tried checking IMEI.info, called up apple, talked to at&t (which always say go talk to apple) I do have a case number from apple as well in case an apple executive reads this discussion forum (case number: 566383594)
Thanks

You got a confirmation from AT&T that it was authorized. Is this correct? - Yes i did get an email authorization on the 21st.
Then you connected the phone to a computer with the latest version of iTunes installed. You clicked on the phone's name in iTunes, then clicked "Backup Now". - Yes
When that finished you clicked "Restore iPhone" (NOT "Restore Backup") - Yes
Are you with me so far? - Yes.
And @ Varjak is right that after the 3rd restore I get the replacement error.
Plus I have NEVER jailbroken the iPhone. To give you another update, I spoke to a really nice apple tech in India who was atleast able to get me out of the replacement error by doing a recovery mode option. However, the lastest restore still gives me the same error
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
Message was edited by: jabgars

Help Needed!!! I am not able to checkout the code base

Similar Messages

Maybe you are looking for