Help needed, i Cant' access any prefs, only eternel wheel of death

Hi,
I've just spent 3 hours at my friend's house last night to help him with is Logic Express and the UX1 (interface.)
He has a G5 1.6 running 10.4.3 with 1.25 gig of ram with the UX1 from Line 6 for his audio interface.
.......Even if logic Express is running fine, we can't access ANY preferences of Logic Express.
The minute we try to open any preferences such as global, midi , the Audio and Driver page, ect... we get the Eternal wheel of Death :-((
We tried with Logic Express 7.0.0, 7.1.0 and 7.1.1 and we have the same problem.
We have deleted all prefs (i think) in case one was corrupted but we still got the same results.
(By reinstalling Logic Express, we were able to have the set-up assistant to open so that we could choose the UX1 for the interface.)
We have update the firmware.
(We can open Prefs in Live, in Garage Band, but not Logic Express.)
i am out of idea......
Any idea !!!
Thanks !!!
G5 dual 2ghz Mac OS X (10.4.1)
G5 dual 2ghz Mac OS X (10.4.1)
G5 1.6ghz Mac OS X (10.4.3)

Hi there,
Funny as I was turning crazy as I have just bought a new mac so new OSX and I was not able anymore to access my preferences in logic. Each time I want to open any of the preferences options, logic was simply freezing(crashing in a way!). I'm downloading at the moment the pro app 3.1 but I think I've already installed it.
And Alelouia !!! This work !!!!
For the info this work without uninstalling 7.1.1
I've just installed the pro app and everything back to normal..
Respect
Mikkael
G5 dual 2Ghz Mac OS X (10.4.3) M-Audio Audiophile firewire, Logic Express 7.1.1, Korg kontrol 49, Emu Proteus

Similar Messages

I cant access any of the content that was in my music library that was set up on my old destroyed laptop. so Home Share cant be used. Is there a way to pull all of the music content, not just iTune purchased music from my 4th Gen Nano back into iTuunes?

I cant access any of the content that was in my music library that was set up on my old destroyed laptop. so Home Share cant be used. Is there a way to pull all of the music content, not just iTune purchased music, from my 4th Gen Nano back into my new iTunes set up on my new home compter?

It has always been very basic to always maintain a backup copy of your computer.
Use your backup copy to put everything back.
The music sync is one - way - computer to ipod. The only exception is itunes purchases.

Safari Quits Unexpectedly On Startup OS X 10.10.2 can anyone help? I cant find any malware or any virus

Safari Quits Unexpectedly On Start up OS X 10.10.2 can anyone help? I cant find any malware or any virus I updated to 10.10.2 also to try to fix the problem.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

TS2972 my apple tv devices and other apple devices can access my library but using my library, i cant access any of the apple tv devices through airplay

my apple tv devices and other apple devices can access my library but using my library, i cant access any of the apple tv devices through airplay

Home sharing isn't working either
Which is why you can not use the remote app. Did you turn on home sharing on your computer and on ATV?
eve though they have the same Apple ID.
Did you enter the ApplieID in the home sharing login though? Or just in for the iTunes store, or iCloud, or photo sharing, or something else?
Home sharing isn't working either, I can't play or transmit any video from my iPad to the Apple TV because it doesn't recognize it
That would be AirPlay, not homesharing. THey are not related. Did you enable air play on all the devices?
Have you run the network test tools on ATV? Can ATV access the iTunes store, Netflix, etc?

TS1702 Anyone know how to get ipad 3 to get unstuck while its updating? My device froze for over a week now and cant access any of my documents cos of it and my uni assign due next mon. Help

My ipad 3 wont allow me to use any app that is 'updating' , im sure its frozen cos its been a week and still not finished updating. Worse part is,my uni assign is on pages and its due, and i can no longer access ANY doc on my ipad. I will fail my double unit for sure, destroy my gpa, and lose $5000 - the cost of the unit of study. Help fix this please.

Well, that got me part way there. When I typed
      /usr/local/bin/snort -?
I got
      dyld: Library not loaded: /sw/lib/libpcap.0.dylib
        Referenced from: /usr/local/bin/snort
        Reason: image not found
      Trace/BPT trap
so back through the same fire drill I went, this time with
      fink install libpcap
and finally, when I typed (again)
      /usr/local/bin/snort -?
I got
      /usr/local/bin/snort -?
       ,,_ -*> Snort! <*-
       o" )~ Version 2.4.0 (Build 18)
       '''' By Martin Roesch & The Snort Team: http://www.snort.org/team.html
       (C) Copyright 1998-2005 Sourcefire Inc., et al.
      USAGE: /usr/local/bin/snort [-options] <filter options>
      Options:
       -A Set alert mode: fast, full, console, or none (alert file alerts only)
                   {snip}
              -Z Set the performonitor preprocessor file path and name
              -z Set assurance mode, match on established sesions (for TCP)
              -? Show this information
      <Filter Options> are standard BPF options, as seen in TCPDump
So I made it! (I think) -- now, to figure out all the command line configuration parameters for the snort.conf files, and how to make it launch at startup....
Thanx, Gary!
j.v.

My itunes store is not showing up. I need help because i cant purchase any music

My Itunes store is not showing up. I cant purchase any music

I tookyour suggestion and SUCCESS! I can now access the Itunes Store. A simple fix, and thanks so much!!.
Below is the advice you forwarded:
I found a solution to my problem.
> start menu
> accessories,
> right click on the command prompt icon and choose "run as administrator".
Once it opens, type in the following command...
netsh winsock reset
hit enter
You should get a message that the winsock reset successful and you will need to reboot your computer.
Reboot and when I reloaded itunes the store loaded fine.
Thanks again, -Dean Stoneburner

Cant access any apps????

hey, i really need help....my phone wont let me access any apps?its saying my password is in correct,however when i go on the laptop its fine. i would really appreciate some help

Try logging out of your account on your phone by tapping on your id in Settings > Store (Settings > iTunes & App Stores on iOS 6) and then log back in and see if that 'refreshes' the account on it and if you can then download apps.

Why is my screen white? cant access any info

Why has my i pd touch got a white screen? CAn't access any info?

Did you try this?
Display shows white screen
Turn iPod touch off and turn it on again.
If the iPod will not turn off, try to reset it. Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until either the Apple logo or battery symbol appears. If the battery symbol appears, continue to charge iPod touch until it is fully charged.
If that doesn't work, try restoring the iPod. See this article for assistance.
copied from Hardware troubleshooting http://support.apple.com/kb/TS2771

Help needed in changing Access query to Oracle query

hello folks,
I have already posted this question and got some help previously but i have additional query being added to the previous one so thought of seeking some help.here it goes
Am having an access report which comes from a query. the current query behind the report is a consolidated one and comes from quite a few tables . My requirement is to develop a crystal report( which comes with a native oracle db driver) which should look same as the access report. But am unable to use the access query becoz of its format or something. So anyone please throw some light on this. Any help would be kindly appreciated.
SELECT Debtor . EVENT_ID,
Debtor . MEDCAP#,
Debtor . Client Name,
Debtor . CLIENT,
Debtor . Provider ID,
Debtor . GROUPNUMBER,
"OPEN" AS Status,
(IIf(clip_file = "Y", "Clip", "Open")) AS clipStatus,
IIf(collect_only = "Y", "Collection Only", "Regular Collections") AS Collect ?,
IIf(IsNull(Principal), 0, principal,
IIf(IsNull(PAR_FLAG), "N", IIf(PAR_FLAG <> "N", "P", PAR_FLAG)) AS PAR_NPAR_FLAG,
Right(PatientMemberID, 2) AS Patient Suffix
FROM Period, Debtor
INNER JOIN LOB_subtypes ON Debtor . SUBTYPE = LOB_subtypes . SUBTYPE
WHERE (((Debtor . CLIENT) = "CV1") And ((Period . PeriodName) Is Not Null) And
((Debtor . STATUS) = "OPEN") And ((LOB_subtypes . LOB) = "PBA"));
Thanks

The expression...
IIf(IsNull(Principal), 0, principal) - IIf(IsNull(PRORATED_TRANAMT), 0, prorated_tranamt)...is equivalent to...
NVL(PRINCIPAL, 0) - NVL(PRORATED_TRANAMT, 0)Does that answer your question?
As for...
IIf(IsNull(PAR_FLAG), "N", IIf(PAR_FLAG<>"N", "P", PAR_FLAG))...you might try...
CASE
    WHEN PAR_FLAG IS NULL THEN 'N'
    WHEN PAR_FLAG != 'N' THEN 'P'
    ELSE 'N'
END

Urgent help needed: WEBAS server suddenly dead.. only SDM is working

Hi Everyone,
We have a WEBAS server installed on win 2003 mahcine. We wanted to install Visual composer and because there was no IIS on server, we installed it.
But after installation i am not able to access my server.
http://<server_name>:50000/index.html
is not working.. checked port 50000(using telnet ip_address port) and found this port is not in use any more..
but i am able to start SDM using remotegui.bat
in sap management console i can see sever is green.
Any idea what has gone wrong??
Thanks and regards,
Sudhir

Hi Sudhir
check in service file for following entry
http 80/tcp www www-http #World Wide Web
also check for follwoing service is runnig in windows 2003 server
IIS admin service
word wide web publishing service
the above service is needed for IIS working
alos check with http://localhost
(coz there is no problem with ur Portal system only problem with IIS )
if every think is ok check the event log for service in windows 2003 server
regards,
kaushal

Help needed setting up access point to public network

Hi from a newbie,
Assuming they are suitable, I want to use one (or two) AP1232AG-E-K9 access points for Internet connection through a public wireless network (BTFON), where wire broadband is not an option. I've downloaded what I think is the correct manual for the APs and I'm now scratching my head as to where and how to start setting them up. I want to use these Cisco APs in the hope they will give me better wireless performance than I'm currently getting, which is frequently flakey.
I've tried to reset the APs to the factory default but there seem to be different ways of doing this depending on what you want and what you've got. I made up a console cable to access the console but there even appear to be different versions of this so I'm not sure if the cable I have is the correct one.
I have setup and used lower end wireless devices in the past but these Cisco units seem real complicated and I'm going to need help in getting them working.
Any assistance would be much appreciated.
Kind regards,
Glenn.

Updated network diagram.

Help Needed - Remote Disk Access via MobileMe for AEBS

OK, I've done a lot of reading in this forum, but didn't find a resolution to my problem.
Here are my configuration:
1) ADSL Router(2Wire 2700HGV-2) in bridged mode
2) Airport Extreme Base Station (Simultaneous Dualband) with 7.4.1 firmware acting as the router using PPPOE
3) External USB disk formatted using Mac OS format attached to AEBS
Working:
1) Within the LAN, can access the disk without any problem
2) Over the WAN, Back to my Mac works fine for all my Mac computers
Not Working:
Over the WAN, I can see the AEBS in the shared section, however, upon clicking it, it always tells me that the connection failed after about 30 seconds, even when I try to use "connecting as".
Anyone has tried this feature and it worked? Really appreciate if you can help as I am going to be on trip soon and I wish to access the disk from Internet when I am over there.
Thank you!

Hi rekeno
Thanks for your post. I have the exact some problem. I'm sitting at work with my MacBook. At home there's my Airport Extreme and a Mac Pro.
I can see both in my "Shared" section AND they also have different IPv6 tunnel addresses:
[15:07 root@pm1] ping6 macpro.XXX.members.mac.com
PING6(56=4088 bytes) fd22:3569:a8da:4c12:217:f2ff:fed4:6de0 --> fd44:bbdd:fce3:3be9:21d:4fff:fe4b:b80
16 bytes from fd44:bbdd:fce3:3be9:21d:4fff:fe4b:b80, icmp_seq=0 hlim=64 time=54.748 ms
Works.
[15:14 root@pm1] ping6 airport.XXX.members.mac.com
PING6(56=4088 bytes) fd22:3569:a8da:4c12:217:f2ff:fed4:6de0 --> fdfe:d7a4:759a:a360:21b:63ff:fef5:30a2
^C
--- airport.XXX.members.mac.com ping6 statistics ---
3 packets transmitted, 0 packets received, 100% packet loss
This times out.
Interestingly I can use Screen Sharing to my MacPro and do the same:
[15:17 mau@macpro] ping6 airport.XXX.members.mac.com
PING6(56=4088 bytes) fd44:bbdd:fce3:3be9:21d:4fff:fe4b:b80 --> fdfe:d7a4:759a:a360:21b:63ff:fef5:30a2
16 bytes from fdfe:d7a4:759a:a360:21b:63ff:fef5:30a2, icmp_seq=2 hlim=64 time=0.721 ms
This works AND it uses the SAME IPv6 address.
I have also checked that my IPv6 tunnel configuration is allowed in the Airport Utility.
Do you see the same behaviour? Can you run the same commands?
Thanks a lot!
Patrick

Newbie help needed. Cant save to a WD Elements Hard Drive!!!Going Crazy!

We got our imac yesterday! Love it but.....only real issue that is driving me crazy and ruining the experience is that I can't save a pages doc to my WD Elements External Hard Drive. It is installed I can move stuff from it but nothing to it! When I select save as and pick "Elements" a message appears saying <the document "Test" could not be saved as "test". Read-only file system. Can any one explain
Message was edited by: wyleybruce

OSX can read but not write to NTFS formatted disks. If you want to keep the disk as NTFS, there are utilities (like NTFS3G ) you can get that will allow you to save to the disk as it is currently formatted.
IMHO it would be better for you to reformat the disk as Mac OS Extended if you intend to use it on an ongoing basis with your new Mac. But remember to back up anything you want or need to keep, because reformatting will erase everything that is on the drive.
(Notes: If you reformat the disk to Mac OS Extended and then you want to use it with a Windows system, you will need Macdrive on the Windows machine. The only format that is natively compatible on both platforms is FAT32.)

Hi plz some one help me :( i cant play any video in firefox,i see thumbnails but when i go to it said:an error occured plz try again later :( anyone know why?

i hadnt this problem since i reinstall my windows 7 because of some problems ,after i install firefox and real player,flash player ,... :) i wanted to see some clips on youtube but i cant , not also youtube also any sites :( i have a new version of flash player and... plz help me friend its so annoying :(

Check your plugins are uptodate!
*http://www.mozilla.org/en-US/plugincheck/
Type '''about:addons''' in URL and Goto Plugins
* Check all the plugins are "Always Active"
Somewhere on the page right click, go to view page info > permissions and make sure that adobe flash content is allowed to play on that domain.
Flash in Protected mode occurs issues too
*http://kb.mozillazine.org/Flash#Flash_Protected_Mode_issues_on_Windows_Vista_and_above
*http://forums.adobe.com/thread/1018071

Help needed - Can't access OneKey Recovery restoration option after system reboot,

Hi,
I run OneKey Recovery, after I choose "recovery", and system reboot.....system automatically log in Windows 7 again, rather than access OneKey Recovery restoration option.
I am using G570 and OneKey Recovery version is 7. this issue never happened before, it always reboot to OneKey Recovery restoration before....please help. Thanks

You shouldn't need Command + R since the Option key will present you with the Recovery boot volume. Seems something is amiss there, I'm willing to bet you may have been using a wireless keyboard.

Help needed, i Cant' access any prefs, only eternel wheel of death

Similar Messages

Maybe you are looking for