Help needed in creating a Customer in SD

Hi,
I am trying to create a customer using the FM 'BAPI_CUSOTMERCREATEFROMDATA1'. Without Providing Reference Customer nbr, i am not able to create. Is there no means to create a customer without giving Reference Customer.
All helpful answers will be rewarded.
Regards,
Udaya

Hi Udaya,
I have checked for the FM you have mentioned. That does not exist in my system. Anyway I could successfully create a customer using the FM BAPI_CUSTOMER_CREATE.
This is the FM which lets you create a customer without the need of any reference. If it is configured in XDN1 that your account group has external number, please provide a number to your customer in the initial screen after you execute your BAPI.
Let me know if you have any further concerns,
Regards,
Ramakanth

Similar Messages

What do I need to create Flex custom components for Xcelsius 2008 SP3?

Hello, and thanks for your time.
I have recently been roped into creating some custom components in Flex 3 for use in Xcelsius 2008 SP3. I can create custom components in Flex, but I have no idea how to get them into Xcelsius.
I have begun my own research into everything I am going to need, but I am hoping someone out there who has done this can provide a user-friendly itemized list of all the parts that are needed to accomplish this task. I want to make sure I do not miss anything.
Thanks for any insight you may be able to provide.
What I have so far:
Flex Builder 3
Xcelsius Engage Server 5.3 (2008)
What I think I need:
Xcelsius 2008 component SDK
Cheers!
Edited by: midasxl on May 5, 2011 6:11 PM

Hi Manisha,
Even we have a requirement to create doughnut chart in flex and need to add it in xcelisus.I can bulid that in flex and it is working with static data.Please provide me the sample code of how to pass dynamic data from xcelsius excel to this chart and how to create properties file for this chart.I have looked at horizantal slider example but that doesn't help much.
Thanks in Advance.
Regards,
Karthik

I need to create a custom controller. How is this done?.

With the CRM 7 WebUI I need to copy data from the left pane of the Contact screen to the right pane. The left being the details of the Account/contact and the right pane holding details of the Contact (BP).
The left pane is controlled via component BP_CONT, view ContactDetails and the right pane is controlled via component BP_ADDR view StandardAddress. When I press F2 when on a field of either of the two panes I can see that both panes have a parent point to component BP_CONT, view ContactViewset.
However, the parent component and view has no context nodes, so I can place appropriate code in the do_process_output method.
I have been advised that I should create a custom controller, and then bind the appropriate context nodes to it. However, I don't know how to go about doing this and wondered if anyone had come across any suitable documentation of video that might be of help?.
Jason

I found a link which may answer all my quesitons....
http://blogs.moovar.com/sap/sap-crm-create-custom-controller-for-a-web-ic-component/
Jason

Help need to create a query

I need to fetch records from a table. Please help me to create a query
The Tablename is Employee. It has the following records
Department Empname Gender
Finance Tom Male
Finance Rick Male
Finance Stacy Female
Corporate Tom Male
Corporate Rob Male
I want to select the value of the Gender field from the Employee table corresponding to a Department
If all the values in the Gender field are 'MALE' corresponding to 'finance' in the Department field, the value should be 'MALE'
If there is a value 'FEMALE', the gender corresponding to the Empname 'TOM' should be considered as the gender

Tables have rows - not records.
Your question is a basic SQL language question - which means you do not know the SQL language. This forum is not a classroom for teaching you the SQL language.
Use the following as the basic outline of how your SQL language statement need to look like for selecting the required from the table:
SELECT
<<sql projection goes here>>
FROM <<table name goes here>>
WHERE <<filter conditions go here>>
{code}
The SQL projection specifies the list of columns the SQL need to return to the caller.
The filter condition is basic predicates and AND and OR can be used for multiple predicates.
Go to http://tahiti.oracle.com and look for the +SQL Reference Guide+ for the Oracle version you are using. The +SELECT+ statement syntax is covered in detail and sample statements are provided.
And please do not expect this forum to be used as a classroom, or expect this forum to do your homework for a class.

Help needed to create Quik Time VR movies, step by step

Hello,
thank you for your attenction.
I need to create Quick time vr movies, and I need to know the exact sequance of steeps to do it, and if the starting point I use is correct.
1) I shooted a sequence of photos with my digital camera (for example: www.stebianchi.com/quicktimevrhelp/still-photo.jpg).
2) Then, with photoshop (CS4) I choose: Automate/photomerge and I select all them to joint them in a bigger 360° panoramic one (www.stebianchi.com/quicktimevrhelp/pan.jpg). If, untill here, all is correct, the first question: in photoshop Photomerge layout option, do I have to choose one voice "auto, perspective, cylindrical, spherical, etc..." rather than anoter one of these?
3) from here, I really need your help.
First of all: the great doubt:
My photos can not cover a spherical panorama, they're only a "ring" around a center (and not a spherical texture). To cover all the surface (or almost all, ok...) of my ambient, do I have to use a wider lens on my camera or there is a different solution (for ex a vertical photomerge?).
4) Done this, I think I shuold buy a software like Cubic converter, to set and export the QTVR movie. Right?
Thanks a lot guys,
all the best!
Stefano

You can call your local apple store(find one on the home page of apple.com) and they will give you instructions how to convert DVD to iPod. That is what they told me, but from what I heard, you may need more than Quicktime Pro. Just call and ask them, because if you make a manual of how to do it, it could help me a lot.
(I'm looking for a good DVD converter, already know some, beside the internet download ones)

Help Needed in Creating Java Class and Java Stored Procedures

Hi,
Can anyone tell how can i create Java Class, Java Source and Java Resource in Oracle Database.
I have seen the Documents. But i couldn't able to understand it correctly.
I will be helpful when i get some Examples for creating a Java Class, Java Source and Stored Procedures with Java with details.
Is that possible to Create a Java class in the oracle Database itself ?.
Where are the files located for the existing Java Class ?..
Help Needed Please.
Thanks,
Murali.v

Hi Murali,
Heres a thread which discussed uploading java source file instead of runnable code on to the database, which might be helpful :
Configure deployment to a database to upload the java file instead of class
The files for the java class you created in JDev project is located in the myworks folder in jdev, eg, <jdev_home>\jdev\mywork\Application1\Project1\src\project1
Hope this helps,
Sunil..

Help needed for creating 1 invoice for 2 different material types.

Dear, Gurus
I really need help here I have spent 3 days cracking my head trying to solve the problem. Problem is client was creating invoice with reference to order and while invoice was being made it would cause an invoice split. The materials involved are Trading Good and Service Material. They would like only 1 invoice. Note nothing was different except material group and item cat. of the material. payment terms billing dates partners everything is same.
Current item config for Trading Good material is ZMPI-project item cat.
Copying requirements   023 Item ord.ref. w/o AZ        Billing quantity     A
Data VBRK/VBRP         000                                           Pos./neg. quantity   +
                                                                                Pricing type         K
                                                                                PricingExchRate type
                                                                                Price source
Current item config for service Material is TAD-Service
Copying requirements   002 Item/order-related          Billing quantity     A
Data VBRK/VBRP         001 Inv.split (sample)            Pos./neg. quantity   +
                                                                                Pricing type         G
                                                                                PricingExchRate type
                                                                                Price source
I was told to change Data VBRK/VBRP to 003 One Invoice which I did in both of these item cat. and yes they worked perfectly but at time of creating the invoice for service material the qty that showed was 11. Note: In sales order it is 1 qty. So I went back into the config of item cat TAD and changed copying requirement to 023 instead of 002 but nothing changed. Seems a qty of 10 is referencing something else which I have no idea what or where it is picking this up from. Just to see or test things I went into the sales order and tried changing the service material qty then a weird popup appears and says service order 12344456 has been blocked. (Seriously I have no idea why this would happen or should be existing at all.) Even if for some reason it is being referenced the service order that is existing is qty 1.
I really really do need help and if someone can help me that would be god sent.
Regards, Ali

You did not mention what value is maintained in the field billing quantity in the copy control->Item settings. Check for the service item, what value is assigned. Put value A and re-test.
Note that whenever you change any settings in configuration side, you need to create a new documents to test the results of the settings. You should not use the existing documents.
When you say the document is blocked, then check the status of the sales order to find the reason for blocking (like credit block, approval etc)..
Regards,

Help needed to create a CSS 'style-switcher' button.

Hi,
I need some help please in creating alternate style sheets for each page on a site I'm creating to enable users to change text size (i.e. small, normal and large options - sometimes, symbolized as a letter 'A' in varying sizes). The site has been built in basic format so far but I would like to add these features for the sake of usability. There are no actual problems with the site as it currently works fine, it's just this one thing I need help with.
Is this possible using post-processing methods, (which I have no problem doing) and if so could someone kindly point me in the right direction? I've searched the iWeb forum using keywords most relevant to this question and have found nothing.
Any help greatly appreciated,
Matt
MacMini G4 1.42GHZ Mac OS X (10.4.8)

Thanks varkgirl,
This works (partially): this is the page:
http://www.charitydesigns.com/odyssey/index.html
The first paragraph is not responding and at larger sizes line spacing is not in proportion to the size of the text (and is squashed), what am I doing wrong?
Hope you can assist.

Help needed on implementing a custom control

Hi
Am developing a control which resembles like Flash timeline or windows movie maker timeline.
It will have multiple nodes in vertical aligned and a slider.
like
=Node1==================|====
=Node2==================|====
=Node3==================|====
'|' is the vertical slider.
1) The nodes count is dynamic
2) The nodes are added to a scrollpane
3) The control should be resizable in horizontal & vertical
4) The nodes can be dragged and dropped
here the problem is the slider should reside top on the nodes and can move horizontally.
Here glasspane is useless, bcoz we can't do the node drag and drop.
Please suggest some architecture to implement this.
Regards,
bee

Why are you still creating a custom TableModel? Did you not see the advice to use the DefaultTableModel in your last posting?
There is absolutely no reason to spend time creating your own custom TableModel. The DefaultTableModel will do everything you need and more.
You should never invoke the fireXXX of the AbstractTableModel from outside the actual model. This tells me you are not using the proper design.
I gave you a link to the Swing tutorial in your last posting as well. Have you read the tutorial yet? The easiest solution is to create a text field that limits the number of characters you can enter and then use this text field to create a default cell editor. But if you haven't read the tutorial you won't understand what I'm talking about.

Need to create a Custom Group..

Post Author: nomore
CA Forum: General
Hi all,
I'm hoping someone can help me with this.
I have a table in a very bad format. Its a table showing all the sales of each product over a year.
It goes in the following format:
Product | Year | Month_1_Qty | Month_2_Qty | ... | Month_12_Qty | Month_1_Value | Month_2_Value | Month_3_Value | ... | Month_12_Value So each line contains a product, how much was sold in each month and for how much. Simple enough, but i hate the way it is laid out!Anyway I am trying to summarize by month, so basically i need to create a group based on nothing as far as i can seeSince there is no date field i cannot use that. I can do the maths and get the formulas ok, i just need to be able to create 12 groups out of nothing, and dont know how to go about it.January - SumOf (Month_1_Value)February - SumOf (Month_2_Value)March - etcI hope you can see what i am trying to do.There is more than likely a dead simple way that i am just overlooking, but it has been a long day - and its not over yet. Any help would be appreciated.

Try to insert a group on account field and in group option select specified order and add new item with name "Income Accounts" and the condition is like 1,2,4,7. Add another item with name "Expense Accounts" and the condition is like 3,5,6. If you have any other accounts then it will be grouped with name "Others". If you don't want the "Others" group then go to options and check the option discard all others.
Hope this helps!
Raghavendra

Need help- need to read a customer table from the payroll schema

Hi gurus,
I need to read an amonunt from a customer table in the payroll schema. Is it possible to input TABLE XXXX in the schema, or is impossible to read from a customer table?Do I need to create a report to upload the amount in an infotype?
Thanks in advanced for for support!

You should create your own custom operation (based on operation TABLE) to read your custom table from a Payroll PCR.
If your custom table's name is longer than 5 characters, you may be required to use operations VAOFF and/or VALEN prior to your custom operation in the PCR.

Help needed to create Notification in IW21 tr code using BAPI

<b>Hi Experts,
I am searching for some BAPI's of IW21 tr code, where I need to create Notification using the details of some legasy system/flat file. I dont wanna use BDC, I need to use BAPI so could anyone help me out.
Thanks in advance,
Sunil</b>

<b>Hi Surya,
Thanx for your reply, if u have the program to create the notification could you please send me,,,, I need it urgently....I have a Z-table which has the datas like;
CusomerName
Customeraddress
Work_order_type
Work_order_priority.........and so on...
Now I need to create notification using the same datas....
Thanks in advance..
Sunil</b>

Help needed to create desktop application background using javaFx.

Hi,
i need to create background for my desktop application in JavaFx. It have top side bottom menu bars to place icon buttons for my app. The whole scene need to resize. I had tried this using
JavaFx composer. But my issue is like in java swing i can not able to create different panels and set different styles. Please help me on this issue.
Thankyou.

Hi mate take a rectangle and fill it to scene width !
use fill gradient and bind it to your main scene.width
for example :
Rectangle {
fill: color.Blue
stroke: LinearGradient {
startX: 125.0, startY: 0.0, endX: 225.0, endY: 0.0
proportional: false
stops: [
Stop { offset: 0.0 color: Color.web("#1F6592") }
Stop { offset: 1.0 color: Color.web("#80CAFA") }
use appropriate start and offset then bind it to scene width and height.
width : bind scene.width;
height : bind scene.height ;

HELP NEEDED BADLY, creating Block Avoider game.

Could anyone please help me with creating a game called block avoider, i have a link here to show what the game should look like. I need alot of help with it so if anyone is good a coding and see`s this as an easy project helping me would be greatly appreciated.
LINK TO SIMILAR GAME:
http://scratch.mit.edu/projects/timo4932/82326

We can help, but we won't do it for you. Start the game, and post a question if you are stuck and need help.

Help needed . Creating DSN in Unix

Hi The Oracle server is running on Unix platform. I need to connect the server from my client application which recoganises the DB using its DSN. Please help me in creating the DSN in the Unix environment.
Any help will be Apreciated.
Regards,
Badhri([email protected])

I'm a bit confused. You need to have an ODBC DSN on your client machine, not on your server machine. ODBC is generally a Windows-only technology-- at least the Oracle ODBC driver is available only on Windows. There are some third-parties that have created various Unix ODBC drivers, however.
If you need to create a DSN on a Unix box, you must not be using the Oracle driver or the standard DSN configuration dialogs. You'd have to contact whatever third-party driver provider you're using to find out how they handle things.
Justin

Help needed in creating a Customer in SD

Similar Messages

Maybe you are looking for