Help needed in Excel Exporting
Hi,
I got a database fieldcalled category.
My report is grouped on category.
Category can be Agriculture or MNO or Energy.
So i am getting 3 groups thats fine and the data obtained is tested to be correct.
Now wen i export the report into excel.
Agriculture should be exported in sheet 1 or excel and
MNO should be exported in sheet2 of same workbook and
Energy should be exported in sheet 3 of same workbook
is it possible. Please Help.
Thanks,
Sandeep
I think it is not possible to export the data into different sheets of excel in crystal reports. You can try third party tools like Visual Cut from the following link
[http://www.kenhamady.com/bookmarks.html]
Regards,
Raghavendra
Similar Messages
-
Help needed: audio missing - export to html & pdf
audio missing - export to html & pdf
both soundtrack and audio on specific pages play fine as slideshow and as export Quicktime.
exports to html & pdf are missing audio entirely.
the audio assets are not in the html folder.
i am not doing anything complicated, one .tiff image per page, approx 12mg apiece.
one soundtrack and one additional page specific audio track.
box checked for saving audio files in preferences and while 'saving'.
tried triggering with 'begin audio' builds.
tried different approved formats for audio.
tried different themes. at default settings.
i am out of ideas. any suggestions?
much appreciated.Sound files are not included in html or pdf exports. There is no way to make it happen. If you need the sound you can export as Quicktime.
-
Help needed saving excel file using servlet and mailing it as attachment
Hi,
I have to enhance an existing application in which (in jsp) using response.setContentType("application/vnd.ms-excel");
response.setHeader("Content-Disposition", "attachment=inline");
and stuff ..
we are asking user to view or save the file. But now i have to write code to save that xls, and send it as an attachment to other users of the application.
I am new to this plz help me out
Thanks in advance
Regards
AashiHi Orlando,
convert content to Hex format then,
lw_document = cl_document_bcs=>create_document(
i_type = 'RAW / HTM'
i_text = lw_main_text
i_subject = lw_subject ).
w_document->add_attachment(
i_attachment_type = 'XLS'
i_attachment_subject = lw_att_sub
i_att_content_text = p_int_soli[]
i_att_content_hex = p_int_solix[] ).
w_int_address = lw_smtp-low.
w_camuser = cl_cam_address_bcs=>create_internet_address( w_int_address ).
w_recipient = w_camuser.
thanks,
Anil -
Help needed while exporting crystal reports to HTML file format using java
Help needed while exporting crystal reports to HTML file format using java api(not using crystalviewer).i want to download the
html file of the report
thanksthe ReportExportFormat class does not have HTML format, it has got to be XML. Export to HTML is available from CR Designer only.
Edited by: Aasavari Bhave on Jan 24, 2012 11:37 AM -
Extremely urgent help needed! I'm on a tight deadline. I'm working on a sequence, with all my settings set to DV. My client needs an AVI file as an output. After exporting using conversion, the file looks and plays fine, except for any transitions. At the start of each transition, there is 1 frame that is unrendered. I have rendered the entire sequence, and tried the export many times now, and I can't figure out what's wrong. I'm working on v5.1.4. Can someone please help?????
Thank you, kind sir! < </div>
Careful who you're callin' names around here, buddy!
Thank you for the kind words, that's why we're here. Hrdly anyone ever closes their threads on a positive note, I thank you for that, too.
Good luck with your future projects and those squeaky deadlines.
bogiesan -
Hello i need a help about script to export translatable text strings from ai files and import them back after editing, thanks in advance
Lanny -
Thank you for taking the time to help with this problem. Can I just say however that as someone who has posted a first comment here and quite clearly never used a forum like this before, your comment unfortunately comes across as very excluding. It makes me feel there are a set of unwritten rules that I should know, and that I don't know them shows that the forum is not for me. In short, it's exactly the kind of response that stops people like me using forums like this.
I'm sure it's not intended to be received like this and I am sure that the way you have responded is quite normal in the rules of a forum like this. However, it is not normal for those of us who aren't familiar with forums and who only encounter them when they have a genuine problem. This is why I hope it is helpful to respond in full.
The reason I posted here is as follows. I was directed here by the apple support website. The original comment seemed to be the only one I could find which referred to my issue. As there is no obvious guidance on how to post on a forum like this it seemed perfectly reasonable to try and join in a conversation which might solve more than one problem at once.
Bee's reply however is both helpful and warm. This could in fact be a template for how new members should be welcomed and inducted into the rules of the forum in a friendly and inclusive way. Thank you very much indeed Bee! -
Need help need help exporting epub to iTunes Producer
Need help need help exporting epub to iTunes Producer. Nothing will load only get that little spinning wheel.
It's not necessary to post a second time. I'm locking this version so others may reply at the first thread you created:
Hi I created a EPUB with indesign cc and I'm trying to submitted it to iTunes Producer -
Excel export (webui crm -- excel) wrong format of house number
Hi,
in an excel export (webui crm ---> Excel) is displaying the wrong format.
If the house number contains a special character such as "/" then the house number displayed in the date format in Excel.
And if in the field house number is a number and a letter such as "9 a", then the house number is displayed in time format (9:00 am) instead the house number.
Does anybody know, how can I solve this problem?
Thank you in adance.
Best regards, JasminHi,
There is no error from the CRM functionality. If you SAVE the excel,instead of opening it directly and then " open with "
word pad or notepad, you can see the phone no.s and fax no.s are properly transported to excel.There is a default format setting of
excel from the Microsoft, so you are getting the default format after opening the excel.
Steps:
1.Export to excel.
2.Choose the BP,PHONE and FAX columns holding the 'CTRL'key.
3.Right click on the chosen columns and choose "format cells".
4.Under the tab "number" choose 'number' and and reduce the decimal
place to '0' and click "OK".
5.Now you will be able to see the expected format.
If you are using IE then the excel file that is being generated should be an XML file which would help with the formating issue. But when there is a problem in the generation of the XML file a CSV file is created instead.
The kind of problems that can cause this could be :
- Wrong version of Excel (professional needed)
- Error in encoding (note 1560243 corrects this)
- Active X Settings on browser are not properly setup or disabled
- Other problems (some fixed in note 1457261)
I hope this helps.
Br,
Lloyd -
Execution date in Excel export from a query
Dear all,
I am wondering if it is possible to have the query execution date in an exported excel.
Case: When working in a query it should be possible to export the query to excel. However I am missing the execution date of the query and the last successful data load (which is visible in the webquery).
Anyone has an idea how to achieve that?
Thank you in advance,
AndreasHey Guys,
Just wanted to point out that I know how to do this with a webapplication but I would need that within an excel export from an ordinary web query.
Could someone help out here?
Thanks in advance,
Andreas -
Crystal Reports 2008 Excel Export Compatibility Patch - second attempt :)
Hello, I actually have a question related to the following thread, so I posted there and was recommended to start a new thread:
Crystal Reports 2008 Excel Export Compatibility Patch?
Question is related to the following doc, specifically, is this patch still available for CR 2008 or not?:
http://help.sap.com/businessobject/product_guides/cr2008V1/en/xi3_cr2008eecp_readme_en.pdf
A response from Don suggested this wasnt available for CR 2008 although this is confusing since the doc refers to CR 2008. My response was as follows and is essentially the question I still have (more so because we have another PeopleSoft/Oracle customer whos come across this doc and wants to know how to apply the fix for CR 2008). Thanks very much in advance!
Hi Don, I know this is an old thread, but Im also running into the same issue and am confused by your statement since the referenced PDF doc says this patch is available for CR 2008. Did you mean that the patch is no longer available or supported for CR 2008 for some reason? If so, any idea why?
Im a developer for Oracle/PeopleSoft and our PeopleSoft suite includes OEM Crystal. We recently upgraded to CR 2008 for our latest release and we are getting the same complaint from a few customers about not being able to output the XLS in Excel 8.0 compatiibility mode like before (In Crystal 9, we used the \Export\Excel\CompatVersion=80 registry key to enable this). So if this patch is available, it would be a huge benefit for us to be able to point our customers to it. If not, please still let me know eitherway.
Thanks very much!
AndrewHi Andrew,
So the story is the Rubik's patch has been available from CR 9 up until CR XI R1 as a simple download. In R2 and above to get it you have to log a case, work with a Report Rep to try to design your reports so they use the new export dll. To get you by until you have time to do so, and after filling out a query for the PM to get info on how to possibly improve the updated export dll to meet your needs, he will then send you the patch on the agreement that this is the LAST time you ask for it.
Support no longer has access to the patch so all requests must go through the Program Manager who keeps tract of who received it.
Bottom line is you need to update the reports to use the new export model.
That old legacy dll was bugging and impossible to maintain.
You can [purchase a support case here|http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=54722300].
This is not a bug and has been this way for 10 years now, time to update your export model and Excel Macro's....
Thank you for your understanding
Don -
Collapsed groupings in Excel export from FR
I am at a client, they are doing variance reporting. Is there a way coming out that will allow groupings to be exported? For example, their report looks at Current forecast and prior year and then prior year variance. When they initially look at the report the prior year columns are hidden. What they are requesting is to export to excel with the prior year hidden columns collapsed.? Any ideas??
Thanks!Hey Guys,
Just wanted to point out that I know how to do this with a webapplication but I would need that within an excel export from an ordinary web query.
Could someone help out here?
Thanks in advance,
Andreas -
Hi All,
User is not able to do Excel export(say with PIVOT Table) wants formatted data, he was able to do so few days back (1week).
I confirmed with him that his frontend patch level 22 (640)
I suggested him reinstall frontend. But it did not work.
As it is a monthend requirement, It become urgent issue.
Those who are familiar issue, Respond to me ASAP
Plz Plz suggest your views, in resolving this issue
Thanks in Advance
RK
Message was edited by:
Ramakrishna VelidandiHi Ramakrishna,
Can you have the user log into a different machine and see if a different installation of the GUI would work?
Another solution would be to have the user export the list to a local file and then open it up directly in Excel. This won't work for pivot tables but would allow them to at least see the data and format as needed.
Note that this also might be an issue with the Office installation. Does an error message appear in SAP or Excel? A few other things to check would be authorizations (both in SAP and the workstation), the event log, and a trace within SAPGUI (which would have to be turned on first).
Hope this helps.
J. Haynes
Denver, CO -
Help needed on installation of Oracle 9i on Sun Solaris 8
Hey,
Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
SimonI have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
Edited by: 916438 on Mar 31, 2012 5:55 PM -
Help needed on installation of Oracle 9i EE on Sun Solaris 8
Hey,
Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
SimonI have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
Edited by: 916438 on Mar 31, 2012 5:55 PM -
Help needed : Extension manager cs6 not listing products
Help needed to Adobe extension manager cs6 to show all my cs6 products
I downloaded Extension manager from here Adobe - Exchange : Download the Adobe Extension Manager
My Computer windows xp 32bit
My Photosop version cs6
My Dreamweaver version cs6
I installed photoshop here : C:\Program Files\Adobe\Adobe Dreamweaver CS6
and my XManConfigfile
<?xml version="1.0" encoding="UTF-8"?>
<Configuration>
<VariableForExMan>
<Data key="$sharedextensionfolder">$shareddatafolder/Adobe/Dreamweaver CS6/$LOCALE/Configuration/Extensions</Data>
<Data key="$dreamweaver">$installfolder</Data>
<Data key="$dreamweaver/Configuration">$userdatafolder/Adobe/Dreamweaver CS6/$LOCALE/Configuration</Data>
<Data key="$UserBinfolder">$userdatafolder/Adobe/Dreamweaver CS6/$LOCALE</Data>
<Data key="NeedOperationNotification">true</Data>
<Data key="QuitScript">dw.quitApplication()</Data>
<Data key="SupportedInSuite">CS6</Data>
<Data key="HostNameForCSXS">DRWV</Data>
<Data key="ProductVersion">12.0</Data>
<Data key="Bit">32</Data>
<Data key="DefaultLocale">en_US</Data>
</VariableForExMan>
</Configuration>
Extension manager installed here : C:\Program Files\Adobe\Adobe Extension Manager CS6
Photoshop Installed here: C:\Program Files\Adobe\Adobe Photoshop CS6
and my XManConfigfile
<?xml version="1.0" encoding="UTF-8"?>
<Configuration>
<VariableForExMan>
<Data key="EmStorePath">$SharedRibsDataFolder/Adobe/Extension Manager</Data>
<Data key="$photoshopappfolder">$installfolder</Data>
<Data key="$pluginsfolder">$photoshopappfolder/Plug-Ins</Data>
<Data key="$presetsfolder">$photoshopappfolder/Presets</Data>
<Data key="$platform">Win</Data>
<Data key="$actions">$presetsfolder/Actions</Data>
<Data key="$blackandwhite">$presetsfolder/Black and White</Data>
<Data key="$brushes">$presetsfolder/Brushes</Data>
<Data key="$channelmixer">$presetsfolder/Channel Mixer</Data>
<Data key="$colorbooks">$presetsfolder/Color Books</Data>
<Data key="$colorrange">$presetsfolder/Color Range</Data>
<Data key="$colorswatches">$presetsfolder/Color Swatches</Data>
<Data key="$contours">$presetsfolder/Contours</Data>
<Data key="$curves">$presetsfolder/Curves</Data>
<Data key="$customshapes">$presetsfolder/Custom Shapes</Data>
<Data key="$duotones">$presetsfolder/Duotones</Data>
<Data key="$exposure">$presetsfolder/Exposure</Data>
<Data key="$gradients">$presetsfolder/Gradients</Data>
<Data key="$huesat">$presetsfolder/Hue Sat</Data>
<Data key="$imagestatistics">$presetsfolder/Image Statistics</Data>
<Data key="$keyboardshortcuts">$presetsfolder/Keyboard Shortcuts</Data>
<Data key="$layouts">$presetsfolder/Layouts</Data>
<Data key="$lenscorrection">$presetsfolder/Lens Correction</Data>
<Data key="$levels">$presetsfolder/Levels</Data>
<Data key="$liquifymeshes">$presetsfolder/Liquify Meshes</Data>
<Data key="$menucustomization">$presetsfolder/Menu Customization</Data>
<Data key="$optimizedcolors">$presetsfolder/Optimized Colors</Data>
<Data key="$optimizedoutputSettings">$presetsfolder/Optimized Output Settings</Data>
<Data key="$optimizedsettings">$presetsfolder/Optimized Settings</Data>
<Data key="$patterns">$presetsfolder/Patterns</Data>
<Data key="$reducenoise">$presetsfolder/Reduce Noise</Data>
<Data key="$replacecolor">$presetsfolder/Replace Color</Data>
<Data key="$scripts">$presetsfolder/Scripts</Data>
<Data key="$selectivecolor">$presetsfolder/Selective Color</Data>
<Data key="$shadowhighlight">$presetsfolder/Shadow Highlight</Data>
<Data key="$smartsharpen">$presetsfolder/Smart Sharpen</Data>
<Data key="$styles">$presetsfolder/Styles</Data>
<Data key="$textures">$presetsfolder/Textures</Data>
<Data key="$tools">$presetsfolder/Tools</Data>
<Data key="$variations">$presetsfolder/Variations</Data>
<Data key="$webphotogallery">$presetsfolder/Web Photo Gallery</Data>
<Data key="$workspaces">$presetsfolder/Workspaces</Data>
<Data key="$zoomify">$presetsfolder/Zoomify</Data>
<Data key="$hueandsaturation">$presetsfolder/Hue and Saturation</Data>
<Data key="$lights">$presetsfolder/Lights</Data>
<Data key="$materials">$presetsfolder/Materials</Data>
<Data key="$meshes">$presetsfolder/Meshes</Data>
<Data key="$rendersettings">$presetsfolder/Render Settings</Data>
<Data key="$volumes">$presetsfolder/Volumes</Data>
<Data key="$widgets">$presetsfolder/Widgets</Data>
<Data key="$localesfolder">$photoshopappfolder/Locales</Data>
<Data key="$additionalplugins">$localesfolder/$LOCALE/Additional Plug-ins</Data>
<Data key="$additionalpresets">$localesfolder/$LOCALE/Additional Presets</Data>
<Data key="$localeskeyboardshortcuts">$localesfolder/$LOCALE/Additional Presets/$platform/Keyboard Shortcuts</Data>
<Data key="$localesmenucustomization">$localesfolder/$LOCALE/Additional Presets/$platform/Menu Customization</Data>
<Data key="$localesworkspaces">$localesfolder/$LOCALE/Additional Presets/$platform/Workspaces</Data>
<Data key="$automate">$pluginsfolder/Automate</Data>
<Data key="$digimarc">$pluginsfolder/Digimarc</Data>
<Data key="$displacementmaps">$pluginsfolder/Displacement Maps</Data>
<Data key="$effects">$pluginsfolder/Effects</Data>
<Data key="$extensions">$pluginsfolder/Extensions</Data>
<Data key="$fileformats">$pluginsfolder/File Formats</Data>
<Data key="$filters">$pluginsfolder/Filters</Data>
<Data key="$imagestacks">$pluginsfolder/Image Stacks</Data>
<Data key="$importexport">$pluginsfolder/Import-Export</Data>
<Data key="$measurements">$pluginsfolder/Measurements</Data>
<Data key="$panels">$pluginsfolder/Panels</Data>
<Data key="$parser">$pluginsfolder/Parser</Data>
<Data key="$3dengines">$pluginsfolder/3D Engines</Data>
<Data key="$lightingstyles">$pluginsfolder/Filters/Lighting Styles</Data>
<Data key="$matlab">$photoshopappfolder/MATLAB</Data>
<Data key="UserExtensionFolder">$photoshopappfolder</Data>
<Data key="$photoshop">$UserDataFolder/Adobe/Adobe Photoshop CS6/Configuration</Data>
<Data key="DisplayName">Photoshop CS6 32</Data>
<Data key="ProductName">Photoshop32</Data>
<Data key="FamilyName">Photoshop</Data>
<Data key="ProductVersion">13.0</Data>
<Data key="IconPath">Configuration/PS_exman_24px.png</Data>
<Data key="SupportedInSuite">CS6</Data>
<Data key="HostNameForCSXS">PHSP</Data>
<Data key="Bit">32</Data>
</VariableForExMan>
</Configuration>
Please someone help me i cant install any photoshop extension because of this issue,,,Waiting for your reply ...thanks
Here is the results
I installed photoshopcs6 illustrator cs6 dreamweaver cs6 illustrator cs6 in the system , But nothing seems
Result: BridgeTalk Diagnostics
Info:
Name = estoolkit-3.8
Status = PUMPING
Path
Version = 2.0
Build = ES 4.2.12
Next serial number = 40
Logging: = OFF
Now = 15:55:49
Messages:
Message Version = 2.05
Authentication = ON
Digest = ON
Thread: estoolkit-3.8#thread
Avg. pump interval = 55ms
Last pump = 62ms ago
Ping: 7
ECHO_REQUEST: ECHO_RESPONSE
Timeout = undefined
Handler = undefined
STATUS: PUMPING
Timeout = undefined
Handler = undefined
MAIN: MAIN
Timeout = undefined
Handler = installed
LAUNCHED: LAUNCHED
Timeout = undefined
Handler = installed
DIAGNOSTICS: DIAGNOSTICS
Timeout = undefined
Handler = installed
INFO: INFO
Timeout = undefined
Handler = installed
SETUPTIME: thread=0ms, left=16ms
Timeout = undefined
Handler = undefined
Instances: 3
estoolkit-3.8#dbg:
msg[15:55:49]: 00000035
@BT>Version = 2.05
Target = estoolkit-3.8#dbg
Sender = estoolkit-3.8#dbg
Sender-ID = localhost:win3788
Timeout = 15:55:50
Type = Ignore
Response-Request = Timeout
Headers = (no headers)
Timestamp = 15:55:49
Serial-Number = 35
Received = undefined
Result = undefined
Error = undefined
Body = (empty)
Incoming: 1
Outgoing: 0
Handler: 9
ExtendScript = for all messages
Error = for only msg #25
Error = for only msg #27
Error = for only msg #31
Result = for only msg #35
Error = for only msg #35
Timeout = for only msg #35
Result = for only msg #37
Error = for only msg #37
estoolkit-3.8#estk:
msg[15:55:49]: 00000037
@BT>Version = 2.05
Target = estoolkit-3.8#estk
Sender = estoolkit-3.8#dbg
Sender-ID = localhost:win3788
Timeout = 16:05:49
Type = Debug
Response-Request = Result Error
Headers = (no headers)
Timestamp = 15:55:49
Serial-Number = 37
Received = undefined
Result = undefined
Error = undefined
Body: 107 bytes
Text = <get-properties engine="main" object="$.global" exclude="undefined,builtin,prototype" all="true" max="20"/>
Incoming: 1
Outgoing: 0
Handler: 1
ExtendScript = for all messages
estoolkit-3.8: (main)
Incoming: 0
Outgoing: 0
Handler: 1
ExtendScript = for all messages
Targets: 1
Connector = PCD
Installed: 0
Running: 0
exman-6.0:
Path = C:\Program Files\Adobe\Adobe Extension Manager CS6\Adobe Extension Manager CS6.exe
Display Name = Adobe Extension Manager CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = OFF
BundleID = com.adobe.exman
Status = (not running)
ExeName = Adobe Extension Manager CS6.exe
Installed: 1
Running: 0
Groups = (no groups defined)
Maybe you are looking for
-
Sun Application Server 8.1 remote deplyment database connection
I use the deploy to Remote server to deply a project to Sun Application Server 8.1. When i try to connect to the database I get connection error javax.servlet.ServletException: javax.faces.FacesException: java.sql.SQLException: Error in allocating a
-
Passing MSI properties causes itunessetup to fail
Trying to install latest iTunes 11.0.2.26 Installing on Windows 7 x86 SP1 all updates applied. Here is the behavior I've noticed. If trying to run iTunesSetup.exe via command line and you pass any MSI PROPERTY arguments to the setup it will fail. It
-
Word, Pages, and google drive not working
I'm on 10.8.5 Yesterday everything was working fine. I was taking notes in a google document. This morning when I tried continuing my notes, I was able to type two words before the tab crashed with the "aw snap. something went wrong" error. I cannot
-
How can I remove photos from an album on my iPhone?
Hey I am trying to remove photos on my iphone from an album from but when I remove the photos from the camera roll album they got removed in all the others albums so is htere any way to remove the pics from an album only and not from all the albums?
-
I have an Access DB with quite a few Linked Tables that point to a SQL Server backend db. Currently I am using an ODBC connection defined on my pc, but I want other users to be able to download the .accdb file from a share and run. Will I have to d