Help needed in getting my Alesis Multimix Firewire 16 to work with Audition CS6
I've just bought a new Fujitsu AH 532 Lifebook Laptop with a Windows 8, 64 bit OS. I've installed my Adobe Audition CS6 on it and I've connected my Alesis Multimix 16 Firewire to it via my StarTech 34mm Firewire Express Card which has a Texas Instrument Chipset. AA CS6 sees the mixer but only allows a stereo track input but it also does not want to record. I've attached some images of the audio channel mapping, audio hardware setup, and also the multitrack recording view. Also I'm using the Alesis Windows 7 driver for the mixer. You will also see that I cannot select the sample rate in the audio hardware setup panel, the sample rate is stuck on zero. In the multitrack view there's no signal when I press the record button.
All suggestions and help will be highly appreciated.
Regards,
Donovan.
It's probably nothing but this is from the Windows Dev Center
"In Windows Vista, Windows Server 2003, Windows XP, Windows 2000, Windows Millennium Edition (Me), and Windows 98, audio drivers conform to the Windows Driver Model (WDM) and make use of the kernel streaming (KS) components, which operate in kernel mode and are part of the operating system."
I don't see any mention of Windows 8 - maybe nothing?
Just a thought - why not try the asio4all driver just to see if it makes a difference?
You can install it and then select that driver in Audition - you can always switch back
http://www.asio4all.com/
Similar Messages
-
How to get Point Grey Dragonfly firewire cameras to work with LabVIEW 2010
We recently got a new computer. The O.S. is Windows 7, 64-bit. It has LabVIEW 2010 (also 64-bit) and the Vision Development Module, as well as the Vision Acquisition Driver. We also have Point Grey Dragonfly Express cameras. The first trial of using LabVIEW to get images from one of the cameras yielded greyscale images (they are color cameras). We then installed the Point Grey drivers (flycapture2.1.3.4_x64). After installing the drivers, the camera was is no longer recognized in MAX. Does anyone have pointers or advice? Thanks.
It's been a bit since I've messed with camera settings. But I think LabVIEW requires the NI-IMAQdx driver and the greyscale was from not setting the bayer filter. I can't poke around my camera settings right now, so I can't double check.
-
Alesis Multimix FIREWIRE question
I have an alesis multimix 12 FIREWIRE which is FIREWIRE 400. it was working fine on my PC. now I have a new iMAC and it only has 1 firewire 800 port. I bought a 400 to 800 firewire cable and tested the cable with a FIREWIRE 400 hard drive and it works fine. HOWEVER, when I plug it into the ALESIS MULTIMIX FIREWIRE, it doesnt work. it doesnt show up in system profile or in the alesis multimix control panel. I could only find one discussion about it which said somethng about not getting enough power to the device when you use s 800 to 400 cable. However, there was no solution. is there anything I can do to get this working or am I stuck and need to invest in something new (Thanks Apple)
.. Please help ... DaveIf I use the 400 to 800 cable for the hard drive itself, the hard drive works. I the hard drive only has one regular sized firewire 400 port and one mini firewore port. I took a cable that goes from regular firewire 400 to mini firewire 400 and it didnt see the alesis multimix. I called ALESIS and they tell me it should work but couldnt tell me how . they told me they need to investigate and will get back to me. Any other ideas?
-
GB2 & Alesis MultiMix Firewire Problem
I just purchased an Alesis MultiMix Firewire mixer to use with Garageband 2.
As a mixer, everything works fine, apart from the firewire.
When I connect the mixer to my PowerBook G4 (10.3.9) via firewire, Garageband and Audio / MIDI Setup see the firewire mixer. I had no problem recording via the firewire connection. My problem is when I try to play back the Garageband recording through the mixer via firewire. The output is distorted and choppy.
Next I tried playing something that I recorded before I got the mixer (to determine if it's an input or output problem). This played back distorted and choppy.
Next I didn't use the mixer but routed the GarageBand's output through the PowerBook's built-in audio. It played fine.
I also tried a different firewire cable and powering both the mixer and computer up and down many times inbetween. Nothing changed.
So I know the problem has to do with the Garageband output through the mixer.
One thing I thought was curious was that the mixer worked at 24 bit and GarageBand works at 16 bit. Could this be the problem? I couldn't find any way to configure the mixer to work at 16 bit.
Anyways, any help would be very appreciated.
Thanks,
LeonD
PowerBook G4 Mac OS X (10.3.9)Well I've been on the phone twice with Alesis today. They basically had me try all the things I tried on my own. At one point, they thought I had a defective unit so I brought it back and traded it for another one. The second one did sound a little better but it still was not useable.
One of the tech was using a 12" PB and said his worked. I tried with a 15" and 17" PB. I also have a 12" iBook. I tried that and it also didn't work.
Alesis is not giving up. They gave me one thing to try and said if it didn't work, to call back tomorrow. I actually live near Alesis and offered to bring my gear in and have them look at it first hand. They declined saying they weren't set up for that.
The oddest thing today was right before I called them the first time, I tried playing back via the mixer and it worked. I didn't believe it. I tried both GarageBand and Cubase. Then just to make sure, I shut everything down and started back up again. My problem was back and I haven't been able to make it work again.
Recording shouldn't be this hard,
LeonD -
I need to get my iPod to no longer be associated with the original i store account. My husband set it up through his account but now I have my own account. I don't want to go through his every time I want to make a change. how do I make this change?
I am trying to stop using my I-pod under my husband's I-Tune account. It was set up under his account and the only way I can use it under my account is to erase all of the songs my husband loaded on for me. I had heard there is a duration that I-Pods are locked into to one account only, and I am trying to discover how I can use my account without having to erase everything on the I-Pod. I know it sounds confusing but that's the way I-tunes have set it up. thanks for asking.
-
I'm a software tester for an in-house app at my company. version 10.0.2 is not cmopatible with some controls within our software. I need the v9.0.1 download which I know works with the controls. Where can I get it?
Well, if you need old versions of firefox you can find them on this site:
- http://www.oldapps.com/firefox.php
Best regards, G-Cloud. -
Hi,
I have been trying to get the sap.ca.ui.FileUpload control working with an OData Gateway service, specifically /IWPGW/TASKPROCESSING which is the service used by both Fiori Approve Requests and the Unified Inbox.
I have looked at the sample application in the Explored at SAPUI5 Explored
I have managed to replicate that and get it to work, but as soon as I switch it from a JSONModel to an ODataModel I get javascript errors from within the setModel method of the control. I have redefined that method and corrected the errors, which enables me to get a bit further, but then I hit more errors, and other strange behaviour.
Either I am doing something completely wrong, or to me it appears as if this control is still extremely buggy and maybe either not designed to work with an ODataModel, or just hasn't been tested using an ODataModel. I'm hoping it is my mistake.
So has anybody out there successfully managed to use this control connecting it to a Gateway OData service? If so please share your experience.
Thanks,
BradHi Pauline,
Same issue I had, I switched to using a sap.m.list and handling the press as follows:
attachmentsList.bindItems(workItemPath + "/Attachments", new sap.m.StandardListItem({
type: sap.m.ListType.Active,
title: "{FileName}",
description: "{CreatedByName}",
icon: "sap-icon://doc-attachment",
// counter: "{FileSize}",
info: {path : "CreatedAt", formatter: dateTimeFormatter},
tap: function(oEvent){
var oContext = oEvent.getSource().getBindingContext();
var media_src = oContext.getProperty().__metadata.media_src;
sap.m.URLHelper.redirect(media_src, true);
}), new sap.ui.model.Sorter("CreatedAt", true));
So sap.m.URLHelper.redirect(media_src, true); is what loads the attachment.
See the full function handler:
function(oEvent){
function(oEvent){
var oContext = oEvent.getSource().getBindingContext();
var media_src = oContext.getProperty().__metadata.media_src;
sap.m.URLHelper.redirect(media_src, true);
This should be enough if you only want to list and display the attachments, then you don't really need the FileUploader control as that is more advanced and handles upload, display, change and deletion of files.
I only needed to upload and display files, so I used a list to display it and created a separate upload button using the sap.ui.unified.FileUploader control.
Hope that helps.
Cheers,
Brad -
Keep getting 'do I want to connect to BT unrestricted network' which I have never used before. I can get my ISP details input but get message 'incorrect password' even though it works with 3 other devices. My network provider, Virgin Media, sent an engineer but he couldn't solve the problem - said network was all ok so problem must be with my iMac (OSX 10.4.11). When I try to use internet I get BTWiFi is current wireless network - I've never used this! I've tried to change this and virgin media details are accepted, it's just the password stage that prevents me from connecting. I am not very knowledgeable with computers so I really need a step by step guide to solve this problem. PLEASE HELP!!!
Excuse me barging in on the thread, but I have a lot of experience with Telus, and roaming with my BlackBerry (currently a Z10). In short, you've been fed some outdated info by the Telus rep. Telus has become very Android-centric, and it seems like a good number of Telus CSR's are still reading from a Legacy BlackBerry trouble-shooting guide.
My Z10 is unlocked, and I periodically use an AT&T sim when traveling in the US. I have never had to change an email setting to get full email function -- including the SMTP settings. To put it simply, your device first connects to a network using credentials provided. At most hotels, for instance, your device will scan for and pick up a WiFi network. The hotel will tell you the WiFi network name and give you a password to use. You simply enter the password when prompted, then you may have to agree to certain conditions. That's it.
Your email settings are just that. Using whichever network to which you are connected, the user name and password give you access. The settings coincide with the email provider's server settings. These don't typically change with the location from which you are connecting.
I'd suggest you take a look at this very helpful email settings tool provided by BlackBerry, if you are having difficulty: http://helpblog.blackberry.com/2013/03/email-account-validation-tool/
It helps you determine the possible settings for connecting to your email provider. Different providers offer different connection options, sometimes more than one. Opinions vary, but my preference in descending order is: ActiveSync, IMAP, then POP if required. ActiveSync (aka EAS) and IMAP will offer 2-way sync.
Take a look at the tool and pop a message back here if you have any questions. Good luck. ~ecm -
I can not get the flash player plug in to work with Internet Explorer
I can not get the flash player plug in to work with Internet Explorer
Zoltan71 wrote:
I just bought this computer. My Internet Explorer is version 11.0.1
I have the box checked to Install new version automatically, but it has not done any upgrading.
I can't get the computer to update anything as far as I can see.
The flash plug in does work with the Crome browser but it will not work with Internet explorer.
I looked in the manage add-ons and it says enabled.
I also went into the safety tab and deselected
Active X filtering.
Restarted and still does not work.
I need help.....
Chrome uses a different and separate plug-in.
There are things about IE you need to know, especially 11. Specifically:
"User-Agent Strings"
That doesn't mean a lot, I'm sure, but it's the root of your problems, and Flash Player has nothing to do with it.
Microsoft "rewrote" the User-Agent Strings for the abomination they call their latest and greatest browser. User-Agent Strings are what websites use to identify the browser you're using and provide the proper content for it's browser engine, like ActiveX stuff, and Flash or HTML5 video. Thanks to the geniuses in Redmond, WA, the User-Agent Strings for IE11 (which has a Trident engine), ID it as either "Gecko" (Firefox) or "Webkit" (Chrome). Problem is: when the site the directs to the content for one of these two engines, the Trident engine in IE can't intepret it and the site then sees IE as an "unidentified" browser.
The problem with an unidentified browser is that the plug-ins in that browser aren't recognized either, so even though you're up to date, it says you need the latest Flash Player when you use IE11. YouTube... has converted to HTML5 video so if it doesn't detect Flash Player, it can display HTML5 (MP4) video which requires no plug-in to play. Facebook can't do that, because HTML5 doesn't apply to games... only video.
Microsoft has no plans to "fix" the mess they've created because they think it's a great idea to block you out of the websites you visit.
They recommend using "Compatibility View" and pretending that you're using an older verison of IE... Problem with that is that it's seen limited success, and you have to enable it for EVERY page that has problems... individually.
I'm not big on "pretending" so I recommend actually using another browser.
Firefox (from Mozilla)
Opera (from Opera)
Safari (from Apple)
Chrome (from Google)
ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in. -
I am having difficulty: we are running a windows server 2003 - mail and outlook support 2007 and upwards, how do I get the brand new apple machines to work with the 2003 version of server
I may be way out, but do you know about this product, would it help integrate the Macs for you.
https://www.thursby.com/sites/default/files/images/ADmitMacv8_SPD.pdf -
How do I get my newly installed airport card to work with SKY?
+This question was originally posted on the G5 iMac section, but I think in retrospect it would be better here. Sorry for my mistake Administrator+.
Here's an interesting one for all you good people. Just bought and paid for an airport extreme card to pop into my little lad's G5 iMac, running Tiger(gggrrrrrrrr etc).
Managed to install it without a hitch.
Trouble is when I try and set it up to work with my SKY router (UK) it keeps telling me that my password is incorrect. The fibber! I know it IS correct as it is the one that SKY gave us and that we have successfully connected both my wife's MacBook and my own MacBook Pro with.
I have tried messing about with all kinds of configurations, but the set up assistants seem more bothered about yapping on about airport base-stations and computer-to-computer networks.
Now don't go telling me I need to get a base station to make it work. Please.
Can anyone offer some sound advice?
It does work on and off though. It works more often when the other Macs in the house are running (What-the-flip???)You can't. Theoretically, Thunderbolt devices that only transfer video and audio should work with Mini DisplayPort MacBooks like yours, but it's not the case of the Thunderbolt Display. Its firmware doesn't allow it to be used with non-Thunderbolt Macs, so you can't use the Thunderbolt Display with the Mid 2010 MacBook Pro.
Instead, you have to look for another screen, or you can get an adapter and connect the MacBook Pro to a TV -
I am struggling to get my Lexmark all-in-one to work with my upgraded MAC
I am struggling to get my Lexmark all-in-one to work with my upgraded MAC
Try resetting the printing system
Mac OS X: How to reset the printing system - Apple Support
What OSX version?
Maybe this will help even though it is fro a different Kodak printer
Kodak esp 3250 wont work
Typically the manufacturer does not give you all the options on a Mac than on a PC. That is up to the manufacturer who writes the drivers for the printers -
Is there any way to get an ipod running/ ipod nike to work with a first generation ipod touch or ipod classic?
We are talking about that Nike device. We have a iPod Classic (software version 2.0.1) and an iPod touch (iOS 4.2.1, an earlier model....maybe 3 years ago). When we plug in into the classic it says "the accessory is not supported) and when we plug it into the touch it says "no receiver required," but neither will load the nike+ running app. I believe it said that our iPod was incompatible with this app. Is there something we need to do to make it compatible? Get an updated operating system or a different app? That has also happened with a few other apps. Thanks!
-
Can I get my HP F4500 wireless printer to work with my Ipad?
Can I get my HP F4500 Wireless Printer to work with my Ipad....It is an IOS 4.3.2
Philip-
I don't see a 4500 HP printer on the list of AirPrint printers, so you will most likely need an alternate way to print to it.
One way is to use an iPad App such as Print n Share. It has its own browser, mail, photo and text programs that can print to some non-AirPrint printers. I don't know if it can print from within other iPad Apps.
Another way is to use a computer to share the printer as AirPrint over WiFi, using a program like Printopia for the Macintosh. For a free solution, search the web for AirPrint Activator.
I recommend you try the free iPad App, HP iPrint Photo.
Fred -
How do I get my new 27" Thunderbolt Display to work with my mid-2010 Macbook Pro?
How do I get my new 27" Thunderbolt Display to work with my mid-2010 Macbook Pro? Or am I SOL?
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro6,1
Processor Name: Intel Core i7
Processor Speed: 2.8 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 4 MB
Memory: 8 GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: MBP61.0057.B0F
SMC Version (system): 1.57f18You can't. Theoretically, Thunderbolt devices that only transfer video and audio should work with Mini DisplayPort MacBooks like yours, but it's not the case of the Thunderbolt Display. Its firmware doesn't allow it to be used with non-Thunderbolt Macs, so you can't use the Thunderbolt Display with the Mid 2010 MacBook Pro.
Instead, you have to look for another screen, or you can get an adapter and connect the MacBook Pro to a TV
Maybe you are looking for
-
Connecting to a stereo sys.
Im new here so bear with me, is there a device to connect my powerbook to my home stereo system to listen to Itunes?? I have a 3year old Yamaha RXV520 reciever. any suggestions would be a help.
-
Your request could not be completed
neeeeeeeed help
-
Bank Charges at the time of APP
Hi All / lakshmi, How to book bank charges at the time of automatic payment f110 Where I need to mention these bank charges? following config. have been done for bank charge... 1. Go to FBZP. Click on Bank Determination. Select company code and click
-
The SQL Server Reporting Services (MSSQLSERVER) service hung on starting.
Hi experts, The SQL Server Reporting Services (MSSQLSERVER) service hung on starting. we are receving these errors twice per week. colud you share solution.
-
WS security on webservices with JAX-WS Provider Interface
Hi Experts: I have developed webservices with JAX-WS Provider Interface (WSProvider),it gives message level handling and also eliminates POJOs for user defined types; but how to add operation level Weblogic security policy on such services ? In my We