Help needed in knowing the B2B Table strucure

Hi All,
I would like to know the tables in the B2B database that stores the ISA,GS,ST,Receiver ID and Ack flag data.
Or any document which contains the description of all the tables and what data is stored in them .
Thanks in advance.
Regards,
Kaavya

Hi Kaavya,
There is a view called b2b_instancemessage where you will get all the details. Please refer the post Getting the ISA Control Number and other details from a b2b generated file
which has the view creation script. If you analyze the script you will get to know the relationship between tables in the b2b schema.
Hope that it helps!!
Thanks,
Dibya Prakash Mohapatra

Similar Messages

Need to know the base tables for the QM datasources

Hello SAP Experts,
I want to know the base tables for the below mentioned datasources which stores the transaction data.
1. 2LIS_05_QE1: Inspection Characterstics Results
2. 2LIS_05_QE2: Inspection Characterstics Results (Quan)
3. 2LIS_05_QVUDN: Usage decision for Inspection
Need your inputs.
Thanks,
Lasya.
Edited by: lasya john on Dec 10, 2008 8:28 PM

Hi Lasya,
You can use help.sap.com for this.
If you do not find this data source there...then
You can go to LBWE t-code in R/3 and then infront of the data source...you have maintenance option.
Click on that ...and go inside it in the display mode.
Here you can see a generic pool of fields on the left side which can be included in the data source........ field present in the data sources in the right side of the pool.
For every field you have a tructure name infront of it like MCXXXX where XXXX is the table name.
So the field is being from that particular table.
Even I would the same thing to reply to your thread.
You can follow the same procedure to find the table for any LO data source.
This is accurate in 99% cases...only in very few cases like purchasing...we get one or two fields from different tables.
Hope it helps.
Thanks
Ajeet

Need to know the reference table incase of 105 (GR for Blocked STK)

Hi,
I have created one PO and then I have done two 103(GR into Bolcked STK) then after I have done a 105(GR for Blocked STK) against one of the 103.
My question is how could I identify for which 103 I have done 105. Is there any reference table-field where SAP actually stored the corresponding 103 material document number for that 105 material document. How could I link the 105 with the original 103.
Actually I need to show the original 103 number for 105 in FORM output through MB90.
please help me.

The PO is same but I know for 103 and 105 there will be different material document number(MBLNR). But my question is as I have done a 105 against 103. How sap maintain in its table data that against which 103 it actually done 105. in which table it stores the reference data. There is no details in EKBE. Can you guys please do it in real time and check this and let me know.

Please help me to know the tables which contain details of APD and Open hub destination

Hi experts,
I need to know the list of APDs that have been created in our system. So can you please let me know the table name (if there is any) which contains the name of the APD and as well as the status (active / inactive) of the APD.
Thanks ,
Shalini

Hi Shalini,
Go to RSANWB T-code and select any analysis process. Then press the "monitor" button. On the monitor screen, you can see the selection criteria in a table on the right. Now double-click on the table and a popup will come up where you can set the selection criteria. in particular, you can set the time frame and the analysis process selection.
Hope it 'll help you..........
Regards,
Mukesh

I need to know in which table the long text is stored

Using the transaction code 'AC03' , I go to the ' Create Service Master Page '. Navigating through the page , I could see a ' long text ' button . Once it is being clicked , the white space for text entry comes .
My query is this -> I need to know in which table the long text is stored and the name of the field ??
If one goes to the table 'ASMDT' , one can find a field 'KZLTX' , which is a long text indicator, but not a long text storage field ...... plz help

Hi
Use the function module READ_TEXT for fetching the long text..
I came across similar situation in my project where i need to fetch the long text for Notification no.I have used the following code for fetching the Notificatin long text,you can just compare this logic and change accordingly.
 CALL FUNCTION 'READ_TEXT'
 EXPORTING
 CLIENT = SY-MANDT
 ID = 'LTXT'
 LANGUAGE = WA_STRUCT12-KZMLA
 NAME = QMNUM
 OBJECT = 'QMEL'
 TABLES
 LINES = INT_TAB13.
Specify LANGUAGE if you wanna fetch the long text regardless of the log on lang.The resulting long text will be stored in the itab INT_TAB13 which can be defined with reference to the structure TLINE.
Hope this helps.
Regards,
Hakim

I need to know the multitude of reason why my iPhone 5s would prompt me for my Apple ID password. Please help.

I need to know the multitude of reason why my iPhone 5s would prompt me for my Apple ID password.
All I did was place my phone on the charger, I then walked away for 10-15mins and when I came back it was asking me to enter my Apple ID password.
I never gave my password out to anyone ever and hardly anyone knows my email address.
I haven't recently downloaded anything either and I only have one apple device which is my iPhone 5s.
I just want to know really if it could have been because someone was trying to log into my Apple ID?
Please help with multiple reasons why this could have happened. I just want to know the options. Thank you

My iPhone 5s did the same thing yesterday. I have iCloud backup turned on in Settings > iCloud > Storage & Backup and that means it will automatically do a backup when the phone is plugged in, locked and connected to wi-fi. I had it charging and when I returned it was asking for the password and the prompt did identify that it was requesting it for the iCloud backup (something you may not have noticed if you didn't look closely).
It has never done that before and 2 iPads in my household have not yet done it. All are on iOS 7.1
I have found a report of the same issue by a user of the 7.1 beta and in that case it was happening every day. In my case I entered the password then went to the same area in Settings as above and used the "Backup Now" button to do a backup. I will see tonight when I charge again whether this is going to be an every day problem.

I need to know the name of the database table and the fields in that table

hi,
i need to I need to know the name of the database table and the fields in that table for the following fields of the front end .
1) incident details.
2) ownership details
3) injury type
4) % of investigation completed withen 7 days.
5) count of incident type
6) cost of workers compensation claim.
7) injury resulting from for workers compensation claim
8) investigation free text.
9) investigation contribution factors.
10) investigation root cause.
11) investigation root cause free text
12) employee risk assesment
13) protential infrigment notice issued
14) actual infrigment notice issued.
15) actual infrigment notice reference number.
16)vehicle damaged text.
18) when the incident occured.
thanks and regards,
pronoy .

Hello,
Check CCIHT* under se16 and search for relevant information
Thanks
Jayakumar

I need to know the right tools and java technology

Please help,I need to know the right tools and java technology to support what I need.
I had background programming in Assembly,C++,Visual Basic,SAP/ABAP 4.
All I can say, programming is about logic, now we are very helped building program using objects.
I'm very interest to SAP tech, where all screens, programs, reports are resides on tables, this is the real dynamic!
CUrrently I'm eager to do the same technic with java. I'm new to java....
What I know the J2EE is the core for me to start is it right? I was very interest with the Client-Server Tech. How can I impelemet this with Java?
I'm a bit confuse with so many java solutions. There is Java Applets, Swing, Java AWT, JavaBeans, etc...
I don't know what is the best if I want my Presentation/Client Application will run within browser (not standard html, using like windows gui). What should I do to make business logic objects, how to invoke it within the gui. how to make installation package whenever clients connect to the http server.
if you have a pointer to do it please let me know.... I'm very appreciate all your response...
Best regards,
Lucky Pangemanan

I'd say - don't get carried away with the heavyweight frameworks. Don't use EJB if Hibernate and/or Tomcat will do the job. There's a danger of winding up using a bulldozer to crack a wallnut.
What people mean by "J2EE" varies a fair bit.
Start with Tomcat, which has the virtue of being free. Try some JSPs and servlets.
Use Applets to do client side presentation only if you must; Applets create an installation overhead on end-users, and some of them can't cope, while others may not have the necessary installation permissions on their office machines. They are pretty rarely needed, IMNSHO, most client-side behaviour is better handled with html and JavaScript.

How to know the corresponding Table-fields in R/3 for fields in BW

Hi,
We need to enhance the extractor for 0CUSTOMER_ATTR. We have added some new attributes in 0CUSTOMER in BW and we want to know the corresponding Table-Fields in R/3 from where we can populate the values.
The list of fields in BW is as follws. All are 0CUSTOMER attributes.
I am searching on the internet. If you know any link/place where I can find the corresponding fields, please let me know.
0AF_CUSTDC
0AF_CUSTID
0CITY_2
0DB87SIC1
0DBANSALES
0DBAREACOD
0DBCTRYCOD
0DBCTYNAM
0DBCUSTAT
0DBDISTRCOD
0DBEMPBND
0DBEMPTOT
0DBGUDUNS
0DBHQDUNS
0DBBLGLSTAT
0DBLOCACOD
0DBREGCOD
0DBSALBND
0DBSECTCOD
0DBYRSBND
0DBYRSTD
0DB_MAKTCOD
0DB_MATCDS
0FAX_NUM
0ID_TXNUMB3
0ID_XCPD
0LANGU
0POBOX_LOC
0SORTL
0TAX_NUMB2
0DBTRDSTYL
0DBADDRES1
0DBADDRES2
0DBCTRYNA
0DBSTPRCOD
0DBPOSTCOD
0DBNATID
0DBNATIDCO
0DBTELPHON
0DBCEONAME
0DBLNOFBUS
0DBANSLUS
0DBCURNCCO
0DBEMPHERE
0DBSUBCODE
0DBHQNAME
0DBHQCTYNM
0DBHQSTPR
0DBHQCTRYN
0DBULDUNS
0DBULNAME
0DBULCTYNM
0DBGUCTRYN
0DBGUCTRYC
0DBGUNAME
0DBNUMFAM
0DBHIERCO
0DBFAMUPDT
0DBBUSNAME
0DB_MATCH
Thanks,
Naveen Choudhary

Naveen,
Check http://help.sap.com/search/highlightContent.jsp
Also see Re: 0customer_attr enhancement
If the source fields in R/3 are standard, you should be able to find the mapping in the help documentation. If its extension field, then you got to see which extractor (based on the base table extension) suits the best and extend it accordingly else create a new generic extractor.
Hope it helps

I NEED TO KNOW ABOUT DRIVING TABLE...PLEASE

Well, My name is Adan. I am from Panama.. my english is not
good. But I'll try. I need to know about driving tables and how
have to choose a driving table and how optimizer proccess an sql
statment.
Example:
Employees have (1,000,000 rows),
dept have (100 rows)
Category have (100 rows)...
I need retrieved all employees with category and dept name for
those employee with salary > 100000
Well, What is the driving table and where i have to put this one
in the from clause ? What about order in the where predicate...
First ?
Select E.name, C.category, D.Departement
from Employees e, dept d, category c
where
and d.cat = c.cat
and e.deptno = d.deptno
and e.salary > 100000
Last ?
Select E.name,C.category, D.Departement
from dept d, category c ,Employees e
where
and d.cat = c.cat
and e.deptno = d.deptno
and e.salary > 100000
I apreciate your help....Thanks and sorry for my english....
Bye..

Adam,
If you set your optimizer = choose and analyze the tables and
indexes to generate statistics, then your system can use the
Cost Based Optimizer (CBO) and, like David said, it will
automatically choose the best access path, and the order of
things will not matter.
If your optimizer is not set to choose or if there are no
statistics, then it will use the Rule Based Optimizer (RBO), in
which case, the only thing that matters is the order of the
tables in the from clause. When using RBO, the driving table
should be at the end of the from clause, in the right-most
position. The driving table is the one such that, after the
restrictions have been applied, returns the smallest number of
rows. You would have to compare the number of rows in the
employees table where salary > 100000 to the number of rows in
the dept table (100) and the number of rows in the category
table (100).
In RBO, if there are more than 100 rows in the employees table
where salary > 100000, then your from clause would be:
FROM employees e, dept d, category c
In RBO, if there are less than 100 rows in the employees table
where salary > 100000, then your from clause would be:
FROM category c, dept d, employees e
This is all that applies to the example you have given, however
there are other things that can apply in other situations. For
example, if there is an outer join to a table, the table that
has the (+) cannot be used as the driving table.
Barbara

Need to know the user exit to change unlimited check box in delivery tag

Need to know the user exit,
To change the unlimited check box(EKPO-UEBTK) in delivery tag of item details for tcode ME21N/ME22N on SAVE.
Thanks in Advance.
Baburaj

HI Baburaj,
Use the BADI ME_PROCESS_PO_CUST to change the unlimited check box(EKPO-UEBTK)
Implement the BADI and insert the code in the method PROCESS_ITEM
Example code :
*Data Declarations
DATA: ls_mepoitem TYPE mepoitem,
 ls_mepoitemx type mepoitemx,
 ls_customer TYPE mepo_badi_exampl,
 ls_tbsg TYPE tbsg.
INCLUDE mm_messages_mac. "useful macros for message handling
*here we get item data
ls_mepoitem = im_item->get_data( ).
*work area for price value
data : begin of it_eban,
banfn type mepoitem-banfn,
bnfpo type mepoitem-BNFPO,
pries type mepoitem-NETPR,
end of it_eban.
*Get the Purchase requisition price from EBAN table
select single banfn bnfpo preis from eban into it_eban
 where
 banfn = ls_mepoitem-banfn
 and bnfpo = ls_mepoitem-bnfpo.
*if entry is available.
if sy-subrc eq 0.
*check if price is zero
 if it_eban-pries EQ 0.
*if zero, set FREE field of PO to 'X'.
 ls_mepoitem-uebtk = 'X'.
 endif.
 endif.
*Set updated fields
CALL METHOD im_item->set_data
EXPORTING
im_data = ls_mepoitem
Reward if Helpful*****

Need to know the sqluery to find the disabled date from OIM 9.1.0.1

Hi Experts,
Need very urgent inputs from you all for the preparation of our audit.
We are using OIM9.1.0.1
We need to know the sqlquery for finding the Disabled date in OIM given the user ids, as currently we are unable to get the exact data from Historical Reports Option in OIM.
I need to give in this format:
select usr_login, usr_disabled from schemaname.tablename where usr_login in
('aaa','bbb'..... etc)
We have three attributes :USR_DISABLED_BY_PARENT,USR_DISABLED,USR_DEPROVISIONING_DATE,but none of them give the exact date,
USR_DISABLED gives just a flag as 1 or 0.
Also there are no other fields in the corresponding usr table.
So how to fetch the exact Disabled date from OIM system when I input the user ids.
Your immediate response is appreciated.
Thanks
SS

In the entire thread many experts have given nice queries in different formats...
The best approach would be to open up the SQL Developer, connect with the OIM Database and experiment with all sorts of SQL queries provided by all the experts..
Learn some SQL techniques, like Inner Join etc...
Then you yourself will be able to figure out what you need, in exactly which format, for which users and for whom you have to restrict
Then not only this question, you would be able to solve dozens of similar such issues yourself...
And trust me, nothing can match that...
Just in case, you are not familiar with SQL Developer,
http://www.oracle.com/technetwork/developer-tools/sql-developer/downloads/index.html
Oracle SQL Developer 3.2.1 (3.2.10.09.57)
September 24, 2012
The Disabled DATE will be the creation date of that entry in the UPA_FIELDS table when Users.Status changed to Disabled.
SELECT USR.USR_LOGIN, UPA_FIELDS.CREATE_DATE
FROM UPA_FIELDS
WHERE UPA_FIELDS.FIELD_NAME='Users.Status'
AND UPA_FIELDS.FIELD_NEW_VALUE='Disabled'
AND UPA_FIELDS.UPA_USR_KEY=USR.USR_KEY
AND USR.USR_LOGIN NOT IN ('XELSYSADM', 'XELOPERATOR', 'WEBLOGIC');

Any way to know the source table of a Form at runtime

Hi,
Is there any way to know the source table/view.. of a form at run time.
Thanks in advance

Hi,
But Get_Block_Property( ..., DML_DATA_TARGET_NAME)
should be coded, I mean any way to know at the
runtime, as like we get the Error from the
Help->Display Errors.If you are asking if there is a way to get this information from the default menu, then the answer is no. However, you can create your own custom menu, or a button in your form that displays that information using the Get_Block_Property when you click on your menu item or button.

Im about to make a trip to the USA and i need to know the price of an iphone 4s 64GB unlokced please in order to carrie the amount of dollars

Im about to make a trip to the USA and i need to know the price of an iphone 64GB unlokced please in order to carrie the amount of dollars

"Same as what? " US of course.
So the price of an iPhone in the U.S. is the same as the price of an iPhone in the U.S. ?
Okay.
tymcziszyn asked how much an iPhone in the U.S. would cost. Nothing was mentioned about comparing the cost (which you seemed to be attempting to do but your post was a bit short.).
You really meant that the price of an iPhone purchased in the U.S and then paying import duties and VAT when taking it home would (likely be close to the) same price as if purchased in his home country.
and what if his home country does not sell the iPhone?
I understood what you meant but OP may not be native english speaker (though he seems to do well here) so making sure they get the entire message clearly may help.

I need to know the IMEI of the phone

hi there,
to release my phone with a company in Spain need to know the IMEI of the phone you buy as this that I have was repaired.
if anyone can help me to know how to get it would be very grateful.
a greeting.
david

thank you! but i need the imei of my first iPhone. I have now a repaired phone and i need the imei of my first phone

Help needed in knowing the B2B Table strucure

Similar Messages

Maybe you are looking for