Help needed in Monitior Selection

I recently recieved a G4 MDD Dual 1.25, I am going to upgrade the video card to a ATI Radeon 128, but I need suggestions on which monitor to select. I am looking for one that is at least 24-26 in with HDMI inputs. I also know I want a resolution of at least resolution of 1920 x 1200. Do I need to ensure that they are MAC compatiable. This is my first MAC and still learning...

Many monitors & TVs come with DVI as well as HDMI for digital input and also analog inputs VGA, S-video, or RCA/composite, if you shop around you can find some with most of these input options. Many even have a picture-in-picture feature so that you can preview multiple video sources and switch back and forth easily, if you wanted to share the monitor with more than one computer, for example.
Usually computer video cards have digital DVI output and analog VGA or S-video outputs. You can get an adapter or cable to send the computer digital DVI output to the HDMI input.
For audio, you will have to use the line-out from the computer to the audio line-in or AUX input on the TV, if you want to have the TV speakers. Use a standard Radio Shack stereo mini jack cable, or a higher quality (audio-phile more $$$) Monster-brand cable.

Similar Messages

  • Help Needed in At selection screen output

    Hi Experts,
    I need your help in AT SELECTION SCREEN OUTPUT event. My issue is i have 4 radio button and with each radio button couple of parameters that need to be filled in selection screen of report. My requirement is that sometimes user enters details in second radio button parameters but forgot to change the radio button to second one so kindly suggest a solution so that radio button gets selected as per user input in parameter like if user clicks on certain parameter to enter value then automatically corresponding radio button gets selected.
    Thanks in advance for all your help.

    example from a checkbox in one of my progs..but you can do same approach with radio butts
    parameters p_test as checkbox default abap_on user-command test.
    at selection-screen.
        if sy-ucomm = 'TEST'.
          perform birth_mnth_chck.
        endif.

  • Help needed in row selection in Tabular form across pages

    Hi,
    I have a tabular form report similar to http://htmldb.oracle.com/pls/otn/f?p=31517:95. I want to select some rows from first page and then use the pagination to get to the next page, select some more rows and hit the submit button for processing. The rows selected in the last page alone are picked up for processing, and the ones selected in the earlier pages are lost. I see the same behaviour in Denes' example as well. I picked a row in the first page and a row in the next page, and then click "Pick Records", i see only the record i picked on the second page.
    I did play around with "partial page refresh" setting for the tabular form region, but that does not help.
    Is there a way to select across pages in a tabular form?
    thanks,
    Rams
    Edited by: rams1234 on Jan 22, 2009 10:19 AM

    Okay. I could make this work, but this seems to be a roundabout way for me. In my case I dont have any database related query to get the values, hence the Application level process may not be needed.
    When I select the checkbox, i get the value. I am hoping that I should be able to send the value to a javascript function and update the filed value in the function itself. Please see the function below..
    function setFileID(pThis) {
    var chkvals=pThis.value;
    var fldValue = new $x('f_FILELIST').value ;
    if (fldValue != 0)
    { $x('f_FILELIST').value= fldValue+'-'+chkvals;}
    else
    { $x('f_FILELIST').value = chkvals ;}
    This function works fine in making up the list. The issue is, when an already selected row is unselected, the value of the checkbox gets added one more time :) If I detect the checkbox status and subtract the corresponding value, this will be perfect..
    Thanks for the link anyway. I am marking this question answered.
    regards,
    Rams.
    Edited by: rams1234 on Jan 22, 2009 1:18 PM

  • Help Needed to write select statement

    I have a table whose rows like this:
    slno name testno
    1 reni 1
    2 arun 2
    3 jithu 3
    4 rajesh 4
    5 shiju 1
    6 Thomas 1
    7 Thomas 2
    8 Thomas 3
    9 Thomas 4
    many rows like above.I want to select names who have attended all the test that is testno 1,2,3,4
    Looking forward to help from u

    Many ppl have given you solutions and suggestions. Did you try those?
    Anyway, check whether this helps or not?
    SQL> create table t as
      2  select 1 slno,'reni' name, 1 testno from dual union all
      3  select 2,'arun',2  from dual union all
      4  select 3,'jithu',3 from dual union all
      5  select 4,'rajesh',4 from dual union all
      6  select 5,'shiju',1 from dual union all
      7  select 6,'Thomas',1 from dual union all
      8  select 7,'Thomas',2 from dual union all
      9  select 8,'Thomas',3 from dual union all
    10  select 9,'Thomas',4 from dual ;
    Table created.
    SQL> select * from t
      2  where name in
      3          (select name from t
      4          group by name
      5          having sum(decode(testno,1,1,2,1,3,1,4,1,0))=4);
          SLNO NAME       TESTNO
             6 Thomas          1
             7 Thomas          2
             8 Thomas          3
             9 Thomas          4
    SQL> select slno,name,testno
      2  from
      3  (select slno,name,testno,count(1) over(partition by name) cnt from t)
      4  where cnt =4;
          SLNO NAME       TESTNO
             9 Thomas          4
             6 Thomas          1
             7 Thomas          2
             8 Thomas          3
    SQL>

  • Help needed with a SELECT statement. How can I make it run faster?

    Hi,
    not sure if my brain is just too tired but I can't seem to crack this problem today.
    Here is my scenario.
    I have 2 tables
    TABLE1 (searchId INTEGER, routeId INTEGER);
    TABLE2 (routeId INTEGER, cityId INTEGER);
    There are indexes on all 4 columns.
    (routeId on TABLE1 is a primary key).
    In the data I am using, a given search has more than 500 routes, each route has between 10 and 300 cities among more than 4000 possible different cities.
    Now, what I want to create is the list of route couple, within a certain search, that do not have a single city in common.
    That list should populate a table with the following structure
    TABLE3 (searchId INTEGER, routeId1 INTEGER, routeId2 INTEGER)
    Here is the fastest select statement I have found so far.
    SELECT :searchId, t1.routeId, t2.routeId FROM table1 t1, table1 t2
    WHERE t1.searchId=:searchId AND t2.searchId=:searchId
    AND t1.routeId>t2.routeId
    AND NOT EXISTS (
    SELECT cityId FROM table2
    WHERE routeId=t1.routeId
    INTERSECT
    SELECT cityId FROM table2
    WHERE routeId=t2.routeId);
    But it still seem really slow to me.
    Any suggestion for an improved version is welcome.
    Thanks,
    Martin.
    Title was edited by:
    user453358

    I originaly posted this thread because I tought I was missing something "obvious" that would perform better that would make my SELECT statement perform better.
    So I did not want to go as deep as using TKPROOF yet.
    Here is the statistics I gets on my statement.
      1   SELECT t1.searchId,t1.routeId, t2.routeId id2
      2      FROM table1 t1, table1 t2
      3     WHERE t1.searchid=t2.searchid
      4      AND t1.searchId=91
      5      AND t1.routeId>t2.routeId
      6      AND NOT EXISTS (
      7             SELECT cityId FROM table2
      8              WHERE routeId=t1.routeId
      9             INTERSECT
    10             SELECT cityId FROM table2
    11*            WHERE routeId=t2.routeId)
    SQL> /
    43302 rows.
    Tidsåtgång: 00:01:55.02
    Körschema
       0      SELECT STATEMENT Optimizer=ALL_ROWS (Cost=9 Card=1 Bytes=14)         
       1    0   FILTER                                                             
       2    1     TABLE ACCESS (BY INDEX ROWID) OF 'table1' (TABLE) (Cost=1 Card=1 Bytes=7)                                                
       3    2       NESTED LOOPS (Cost=3 Card=1 Bytes=14)                          
       4    3         TABLE ACCESS (BY INDEX ROWID) OF 'table1' (TABLE) (Cost=2 Card=1 Bytes=7)
       5    4           INDEX (RANGE SCAN) OF 'table1_IDX1' (INDEX) (Cost=1 Card=1)                                                    
       6    3         INDEX (RANGE SCAN) OF 'table1_IDX1' (INDEX) (Cost=0 Card=1)                                                      
       7    1     INTERSECTION                                                     
       8    7       SORT (UNIQUE) (Cost=3 Card=108 Bytes=864)                      
       9    8         TABLE ACCESS (BY INDEX ROWID) OF 'table2' (TABLE) (Cost=2 Card=108 Bytes=864)                                 
      10    9           INDEX (RANGE SCAN) OF 'table2_IDX1' (INDEX) (Cost=1 Card=108)                                               
      11    7       SORT (UNIQUE) (Cost=3 Card=108 Bytes=864)                      
      12   11         TABLE ACCESS (BY INDEX ROWID) OF 'table2' (TABLE) (Cost=2 Card=108 Bytes=864)                                 
      13   12           INDEX (RANGE SCAN) OF 'table2_IDX1' (INDEX) (Cost=1 Card=108)                                               
    Statistik
              1  recursive calls                                                   
              0  db block gets                                                     
        2872765  consistent gets                                                   
              0  physical reads                                                    
            812  redo size                                                         
         964172  bytes sent via SQL*Net to client                                  
          32245  bytes received via SQL*Net from client                            
           2888  SQL*Net roundtrips to/from client                                 
         860256  sorts (memory)                                                    
              0  sorts (disk)                                                      
          43302  rows processed  Looks like a big number of consistent gets! Any idea how to improve on that?
    Martin.

  • Help needed badly for selection sort

    I posted this on the other forum but haven't gotten a reply. I have a class that compares the zip codes of a file that is read into the code and store as objects. Now I have to sort the information by the zip codes this is what I have so far and I do not know what I am doing wrong with the selection sort. This is the first time I am doing selection sort.
    Here is my .txt
    10
    Dillin Jake York PA 17409
    Valdir John Chicago IL 98098
    Morphy Bob Harrisburg PA 73829
    Spears Johnathan Chicago IL 09182
    Simpson Bloo Los Angeles CA 94840
    Griffin Taylor York IL 49283
    Cartmen Eric Philadelphia PA 28192
    Connaly Teds Springfield IL 12930
    Marsh Stan Miami FL 48392
    William Thomas Reno NV 39029
    and this is the code:
    import java.util.*;
    import java.io.*;
    import java.util.Scanner.*;
    public class TestCustomer6 {
      public static void main (String[] args) throws FileNotFoundException {
        Scanner scan = new Scanner (new File ("customerData.txt"));
        int numLines = scan.nextInt();
           Customer2[] customer;
         customer = new Customer2[40];
        for (int i = 0; i < numLines; i++) {
          String fName = scan.next();
          String lName = scan.next();
          String city = scan.next();
          String state = scan.next();
          int zip= scan.nextInt();
         Customer2 newObj = new Customer2(fName,lName,city,state,zip);
        customer=newObj;
    public static void selectionSort(int[] array)
    {int count;
       for (count = 0; count < array.length; count++)
          int indexOfMin = findMinimum (array, count);
           swap (array, count, indexOfMin );
         public static int findMinimum (int[] array, int startIndex)
    {int mycount;
         int indexOfMin = startIndex;
           for(mycount = startIndex + 1; mycount < array.length; mycount++)
              if (array[mycount] < array[indexOfMin]
    indexOfMin = mycount;
    return indexOfMin;
         public static void swap (int[] array, int preIndex, int nexIndex)
    double temp = array[preIndex];
    array[nexIndex] = array[preIndex];
    array[nexIndex] = temp;
    the class:
    import javax.swing.*;
    class Customer2{
        public static final int FNAME = 0;
        public static final int ZIP = 1;
        private static final int LESS = -1;
        private static final int EQUAL = 0;
        private static final int MORE  = 1;
        private static int compareAttribute;
         private String firstName;
         private String lastName;
         private String city;
         private String state;
         private int zip;
        static {
           compareAttribute = FNAME;
         public Customer2(){
         firstName = " ";
         lastName = " ";
         city = " ";
         state = " ";
         zip = 0;
         public Customer2(String f, String l, String c, String s, int z){
              this.firstName = f;
              this.lastName = l;
              this.city = c;
              this.state = s;
              this.zip = z;
              System.out.println(this.toString());
        public static void setCompareAttribute( int attribute ) {
            compareAttribute = attribute;
        public int compareTo( Customer customer, int attribute ) {
            int comparisonResult;
            if ( attribute == ZIP ) {
                int p2zip = customer.getZip( );
                if (this.zip < p2zip) {
                    comparisonResult = LESS;
                } else if (this.zip == p2zip) {
                    comparisonResult = EQUAL;
                } else {
                    assert this.zip > p2zip;
                    comparisonResult = MORE;
            } else { //compare the name using the String class�s
                    //compareTo method
                String    p2fname = customer.getFirst( );
                comparisonResult = this.firstName.compareTo(p2fname);
            return comparisonResult;
        public int compareTo( Customer customer ) {
            return compareTo(customer, compareAttribute);
         public String getFirst(){
              return firstName;
         public String getLast(){
              return lastName;
         public String getCity(){
              return city;
         public String getState(){
              return state;
         public int getZip(){
              return zip;
         public String toString(){
              return  getFirst() + ",  " + getLast() + "     " + getCity() + "     "
              + getState() + "     " + getZip();

    1) Your code doesn't compile;
    2) You don't call your selection sort method anywhere;
    3) Your selection sort attempts to sort an int array which doesn't make sense;
    4) You don't use the comparison methods defined in your Customer2 class;
    5) I think that you've just copied/pasted several code fragments;
    6) Your indentation style is highly inconsistent (also see 5).
    kind regards,
    Jos

  • Troubleshoting help needed:  My iMac keeps crashing and restarting with a report detail: "spinlock application timed out"  What can I do to fix this?timed out"

    Troubleshooting help needed:  My iMac keeps crashing and restarting with a notice: "Spinlock application timed out"  What can I do?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
    Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

  • Help needed for writing query

    help needed for writing query
    i have the following tables(with data) as mentioned below
    FK*-foregin key (SUBJECTS)
    FK**-foregin key (COMBINATION)
    1)SUBJECTS(table name)     
    SUB_ID(NUMBER) SUB_CODE(VARCHAR2) SUB_NAME (VARCHAR2)
    2           02           Computer Science
    3           03           Physics
    4           04           Chemistry
    5           05           Mathematics
    7           07           Commerce
    8           08           Computer Applications
    9           09           Biology
    2)COMBINATION
    COMB_ID(NUMBER) COMB_NAME(VARCHAR2) SUB_ID1(NUMBER(FK*)) SUB_ID2(NUMBER(FK*)) SUB_ID3(NUMBER(FK*)) SUBJ_ID4(NUMBER(FK*))
    383           S1      9           4           2           3
    384           S2      4           2           5           3
    ---------I actually designed the ABOVE table also like this
    3) a)COMBINATION
    COMB_ID(NUMBER) COMB_NAME(VARCHAR2)
    383           S1
    384           S2
    b)COMBINATION_DET
    COMBDET_ID(NUMBER) COMB_ID(FK**) SUB_ID(FK*)
    1               383          9
    2               383          4
    3               383          2
    4               383          3
    5               384          4
    6               384          2          
    7               384          5
    8               384          3
    Business rule: a combination consists of a maximum of 4 subjects (must contain)
    and the user is less relevant to a COMB_NAME(name of combinations) but user need
    the subjects contained in combinations
    i need the following output
    COMB_ID COMB_NAME SUBJECT1 SUBJECT2      SUBJECT3      SUBJECT4
    383     S1     Biology Chemistry      Computer Science Physics
    384     S2     Chemistry Computer Science Mathematics Physics
    or even this is enough(what i actually needed)
    COMB_ID     subjects
    383           Biology,Chemistry,Computer Science,Physics
    384           Chemistry,Computer Science,Mathematics,Physics
    you can use any of the COMBINATION table(either (2) or (3))
    and i want to know
    1)which design is good in this case
    (i think SUB_ID1,SUB_ID2,SUB_ID3,SUB_ID4 is not a
    good method to link with same table but if 4 subjects only(and must) comes
    detail table is not neccessary )
    now i am achieving the result by program-coding in C# after getting the rows from oracle
    i am using oracle 9i (also ODP.NET)
    i want to know how can i get the result in the stored procedure itsef.
    2)how it could be designed in any other way.
    any help/suggestion is welcome
    thanks for your time --Pradeesh

    Well I forgot the table-alias, here now with:
    SELECT C.COMB_ID
    , C.COMB_NAME
    , (SELECT SUB_NAME
    FROM SUBJECTS
    WHERE SUB_ID = C.SUB_ID1) AS SUBJECT_NAME1
    , (SELECT SUB_NAME
    FROM SUBJECTS
    WHERE SUB_ID = C.SUB_ID2) AS SUBJECT_NAME2
    , (SELECT SUB_NAME
    FROM SUBJECTS
    WHERE SUB_ID = C.SUB_ID3) AS SUBJECT_NAME3
    , (SELECT SUB_NAME
    FROM SUBJECTS
    WHERE SUB_ID = C.SUB_ID4) AS SUBJECT_NAME4
    FROM COMBINATION C;
    As you need exactly 4 subjects, the columns-solution is just fine I would say.

  • Help needed for grouping.

    Hi,
        Help needed .
    I have an internal table having 6 .
    Ex :
    f1     f2    f3     f4    f5    f6
    a     aa    11    p1  10    10
    a     aa    12    p1  20    20
    b     aa    11    p2  30    30
    b     aa    12    p2  40    30
    Now i want to sum the fields f5 and f6 individually and need to display based upon the fields f1 and f4.
    To Display :
    f1     f2    f3     f4    f5    f6
    a     aa    11    p1  30    30.
    b     aa    11    p2  70    60.
    can anyone help me.How to do this..?
    Thanks

    Here you go
    DATA:
      BEGIN OF cur_tab OCCURS 0,
        f1        TYPE c,
        f2(2)     TYPE c,
        f3(2)     TYPE c,
        f4(2)     TYPE c,
        f5(2)     TYPE c,
        f6(2)     TYPE n,
      END OF cur_tab.
    DATA:
      BEGIN OF sum_tab OCCURS 0,
        f1        TYPE c,
        f4(2)     TYPE c,
        f5        TYPE p,
        f6        TYPE p,
      END OF sum_tab.
    DATA:
      BEGIN OF final_tab OCCURS 0,
        f1        TYPE c,
        f2(2)     TYPE c,
        f3(2)     TYPE c,
        f4(2)     TYPE c,
        f5(5)     TYPE c,
        f6(5)     TYPE c,
      END OF final_tab.
    START-OF-SELECTION.
      cur_tab-f1 = 'a'.
      cur_tab-f2 = 'aa'.
      cur_tab-f3 = '11'.
      cur_tab-f4 = 'p1'.
      cur_tab-f5 = '10'.
      cur_tab-f6 = '10'.
      APPEND cur_tab.
      cur_tab-f1 = 'a'.
      cur_tab-f2 = 'aa'.
      cur_tab-f3 = '11'.
      cur_tab-f4 = 'p1'.
      cur_tab-f5 = '20'.
      cur_tab-f6 = '20'.
      APPEND cur_tab.
      cur_tab-f1 = 'b'.
      cur_tab-f2 = 'aa'.
      cur_tab-f3 = '11'.
      cur_tab-f4 = 'p2'.
      cur_tab-f5 = '30'.
      cur_tab-f6 = '30'.
      APPEND cur_tab.
      cur_tab-f1 = 'b'.
      cur_tab-f2 = 'aa'.
      cur_tab-f3 = '11'.
      cur_tab-f4 = 'p2'.
      cur_tab-f5 = '40'.
      cur_tab-f6 = '30'.
      APPEND cur_tab.
      LOOP AT cur_tab.
        MOVE-CORRESPONDING cur_tab TO sum_tab.
        COLLECT sum_tab.
      ENDLOOP.
      LOOP AT sum_tab.
        READ TABLE cur_tab WITH KEY f1 = sum_tab-f1
                                    f4 = sum_tab-f4.
        IF sy-subrc NE 0.
          WRITE:/ 'Something went very wrong'.
          CONTINUE.
        ENDIF.
        MOVE-CORRESPONDING cur_tab TO final_tab.
        MOVE-CORRESPONDING sum_tab TO final_tab.
        APPEND final_tab.
      ENDLOOP.
      LOOP AT final_tab.
        WRITE:/1 final_tab-f1,
              AT 5 final_tab-f2,
              AT 10 final_tab-f3,
              AT 15 final_tab-f4,
              AT 20 final_tab-f5,
              AT 25 final_tab-f6.
      ENDLOOP.
    and the output
    a   aa   11   p1     30   30  
    b   aa   11   p2     70   60  

  • Help needed on installation of Oracle 9i on Sun Solaris 8

    Hey,
    Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
    Simon

    I have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
    Edited by: 916438 on Mar 31, 2012 5:55 PM

  • Help needed on installation of Oracle 9i EE on Sun Solaris 8

    Hey,
    Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
    Simon

    I have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
    Edited by: 916438 on Mar 31, 2012 5:55 PM

  • Help needed : Extension manager cs6 not listing products

    Help needed to Adobe extension manager cs6 to show all my cs6 products
    I downloaded Extension manager from here Adobe - Exchange : Download the Adobe Extension Manager
    My Computer windows xp 32bit
    My Photosop version cs6
    My Dreamweaver version cs6
    I installed photoshop here : C:\Program Files\Adobe\Adobe Dreamweaver CS6
    and my XManConfigfile
    <?xml version="1.0" encoding="UTF-8"?>
    <Configuration>
        <VariableForExMan>
            <Data key="$sharedextensionfolder">$shareddatafolder/Adobe/Dreamweaver CS6/$LOCALE/Configuration/Extensions</Data>
            <Data key="$dreamweaver">$installfolder</Data>
            <Data key="$dreamweaver/Configuration">$userdatafolder/Adobe/Dreamweaver CS6/$LOCALE/Configuration</Data>
            <Data key="$UserBinfolder">$userdatafolder/Adobe/Dreamweaver CS6/$LOCALE</Data>
            <Data key="NeedOperationNotification">true</Data>
            <Data key="QuitScript">dw.quitApplication()</Data>
            <Data key="SupportedInSuite">CS6</Data>
            <Data key="HostNameForCSXS">DRWV</Data>
            <Data key="ProductVersion">12.0</Data>
            <Data key="Bit">32</Data>
    <Data key="DefaultLocale">en_US</Data>
    </VariableForExMan> 
    </Configuration>
    Extension manager installed here : C:\Program Files\Adobe\Adobe Extension Manager CS6
    Photoshop Installed here: C:\Program Files\Adobe\Adobe Photoshop CS6
    and my XManConfigfile
    <?xml version="1.0" encoding="UTF-8"?>
    <Configuration>
        <VariableForExMan>
            <Data key="EmStorePath">$SharedRibsDataFolder/Adobe/Extension Manager</Data>
            <Data key="$photoshopappfolder">$installfolder</Data>
            <Data key="$pluginsfolder">$photoshopappfolder/Plug-Ins</Data>
            <Data key="$presetsfolder">$photoshopappfolder/Presets</Data>
            <Data key="$platform">Win</Data>
            <Data key="$actions">$presetsfolder/Actions</Data>
            <Data key="$blackandwhite">$presetsfolder/Black and White</Data>
            <Data key="$brushes">$presetsfolder/Brushes</Data>
            <Data key="$channelmixer">$presetsfolder/Channel Mixer</Data>
            <Data key="$colorbooks">$presetsfolder/Color Books</Data>
            <Data key="$colorrange">$presetsfolder/Color Range</Data>
            <Data key="$colorswatches">$presetsfolder/Color Swatches</Data>
            <Data key="$contours">$presetsfolder/Contours</Data>
            <Data key="$curves">$presetsfolder/Curves</Data>
            <Data key="$customshapes">$presetsfolder/Custom Shapes</Data>
            <Data key="$duotones">$presetsfolder/Duotones</Data>
            <Data key="$exposure">$presetsfolder/Exposure</Data>
            <Data key="$gradients">$presetsfolder/Gradients</Data>
            <Data key="$huesat">$presetsfolder/Hue Sat</Data>
            <Data key="$imagestatistics">$presetsfolder/Image Statistics</Data>
            <Data key="$keyboardshortcuts">$presetsfolder/Keyboard Shortcuts</Data>
            <Data key="$layouts">$presetsfolder/Layouts</Data>
            <Data key="$lenscorrection">$presetsfolder/Lens Correction</Data>
            <Data key="$levels">$presetsfolder/Levels</Data>
            <Data key="$liquifymeshes">$presetsfolder/Liquify Meshes</Data>
            <Data key="$menucustomization">$presetsfolder/Menu Customization</Data>
            <Data key="$optimizedcolors">$presetsfolder/Optimized Colors</Data>
            <Data key="$optimizedoutputSettings">$presetsfolder/Optimized Output Settings</Data>
            <Data key="$optimizedsettings">$presetsfolder/Optimized Settings</Data>
            <Data key="$patterns">$presetsfolder/Patterns</Data>
            <Data key="$reducenoise">$presetsfolder/Reduce Noise</Data>
            <Data key="$replacecolor">$presetsfolder/Replace Color</Data>
            <Data key="$scripts">$presetsfolder/Scripts</Data>
            <Data key="$selectivecolor">$presetsfolder/Selective Color</Data>
            <Data key="$shadowhighlight">$presetsfolder/Shadow Highlight</Data>
            <Data key="$smartsharpen">$presetsfolder/Smart Sharpen</Data>
            <Data key="$styles">$presetsfolder/Styles</Data>
            <Data key="$textures">$presetsfolder/Textures</Data>
            <Data key="$tools">$presetsfolder/Tools</Data>
            <Data key="$variations">$presetsfolder/Variations</Data>
            <Data key="$webphotogallery">$presetsfolder/Web Photo Gallery</Data>
            <Data key="$workspaces">$presetsfolder/Workspaces</Data>
            <Data key="$zoomify">$presetsfolder/Zoomify</Data>
         <Data key="$hueandsaturation">$presetsfolder/Hue and Saturation</Data>
         <Data key="$lights">$presetsfolder/Lights</Data>
         <Data key="$materials">$presetsfolder/Materials</Data>
         <Data key="$meshes">$presetsfolder/Meshes</Data>
         <Data key="$rendersettings">$presetsfolder/Render Settings</Data>
         <Data key="$volumes">$presetsfolder/Volumes</Data>
         <Data key="$widgets">$presetsfolder/Widgets</Data>
            <Data key="$localesfolder">$photoshopappfolder/Locales</Data>
            <Data key="$additionalplugins">$localesfolder/$LOCALE/Additional Plug-ins</Data>
            <Data key="$additionalpresets">$localesfolder/$LOCALE/Additional Presets</Data>
            <Data key="$localeskeyboardshortcuts">$localesfolder/$LOCALE/Additional Presets/$platform/Keyboard Shortcuts</Data>
            <Data key="$localesmenucustomization">$localesfolder/$LOCALE/Additional Presets/$platform/Menu Customization</Data>
            <Data key="$localesworkspaces">$localesfolder/$LOCALE/Additional Presets/$platform/Workspaces</Data>
            <Data key="$automate">$pluginsfolder/Automate</Data>
            <Data key="$digimarc">$pluginsfolder/Digimarc</Data>
            <Data key="$displacementmaps">$pluginsfolder/Displacement Maps</Data>
            <Data key="$effects">$pluginsfolder/Effects</Data>
            <Data key="$extensions">$pluginsfolder/Extensions</Data>
            <Data key="$fileformats">$pluginsfolder/File Formats</Data>
            <Data key="$filters">$pluginsfolder/Filters</Data>
            <Data key="$imagestacks">$pluginsfolder/Image Stacks</Data>
            <Data key="$importexport">$pluginsfolder/Import-Export</Data>
            <Data key="$measurements">$pluginsfolder/Measurements</Data>
            <Data key="$panels">$pluginsfolder/Panels</Data>
            <Data key="$parser">$pluginsfolder/Parser</Data>
         <Data key="$3dengines">$pluginsfolder/3D Engines</Data>
            <Data key="$lightingstyles">$pluginsfolder/Filters/Lighting Styles</Data>
            <Data key="$matlab">$photoshopappfolder/MATLAB</Data>
            <Data key="UserExtensionFolder">$photoshopappfolder</Data>
            <Data key="$photoshop">$UserDataFolder/Adobe/Adobe Photoshop CS6/Configuration</Data>
            <Data key="DisplayName">Photoshop CS6 32</Data>
            <Data key="ProductName">Photoshop32</Data>
            <Data key="FamilyName">Photoshop</Data>
            <Data key="ProductVersion">13.0</Data>
            <Data key="IconPath">Configuration/PS_exman_24px.png</Data>
            <Data key="SupportedInSuite">CS6</Data>
            <Data key="HostNameForCSXS">PHSP</Data>
            <Data key="Bit">32</Data>
        </VariableForExMan> 
    </Configuration>
                                                                        Please someone help me i cant install any photoshop extension because of this issue,,,

    Waiting for your reply ...thanks
    Here is the results
    I installed photoshopcs6 illustrator cs6 dreamweaver cs6 illustrator cs6 in the system , But nothing seems
    Result: BridgeTalk Diagnostics
      Info:
      Name = estoolkit-3.8
      Status = PUMPING
      Path
      Version = 2.0
      Build = ES 4.2.12
      Next serial number = 40
      Logging: = OFF
      Now = 15:55:49
      Messages:
      Message Version = 2.05
      Authentication = ON
      Digest = ON
      Thread: estoolkit-3.8#thread
      Avg. pump interval = 55ms
      Last pump = 62ms ago
      Ping: 7
      ECHO_REQUEST: ECHO_RESPONSE
      Timeout = undefined
      Handler = undefined
      STATUS: PUMPING
      Timeout = undefined
      Handler = undefined
      MAIN: MAIN
      Timeout = undefined
      Handler = installed
      LAUNCHED: LAUNCHED
      Timeout = undefined
      Handler = installed
      DIAGNOSTICS: DIAGNOSTICS
      Timeout = undefined
      Handler = installed
      INFO: INFO
      Timeout = undefined
      Handler = installed
      SETUPTIME: thread=0ms, left=16ms
      Timeout = undefined
      Handler = undefined
      Instances: 3
      estoolkit-3.8#dbg:
      msg[15:55:49]: 00000035
      @BT>Version = 2.05
      Target = estoolkit-3.8#dbg
      Sender = estoolkit-3.8#dbg
      Sender-ID = localhost:win3788
      Timeout = 15:55:50
      Type = Ignore
      Response-Request = Timeout
      Headers = (no headers)
      Timestamp = 15:55:49
      Serial-Number = 35
      Received = undefined
      Result = undefined
      Error = undefined
      Body = (empty)
      Incoming: 1
      Outgoing: 0
      Handler: 9
      ExtendScript = for all messages
      Error = for only msg #25
      Error = for only msg #27
      Error = for only msg #31
      Result = for only msg #35
      Error = for only msg #35
      Timeout = for only msg #35
      Result = for only msg #37
      Error = for only msg #37
      estoolkit-3.8#estk:
      msg[15:55:49]: 00000037
      @BT>Version = 2.05
      Target = estoolkit-3.8#estk
      Sender = estoolkit-3.8#dbg
      Sender-ID = localhost:win3788
      Timeout = 16:05:49
      Type = Debug
      Response-Request = Result Error
      Headers = (no headers)
      Timestamp = 15:55:49
      Serial-Number = 37
      Received = undefined
      Result = undefined
      Error = undefined
      Body: 107 bytes
      Text = <get-properties engine="main" object="$.global" exclude="undefined,builtin,prototype" all="true" max="20"/>
      Incoming: 1
      Outgoing: 0
      Handler: 1
      ExtendScript = for all messages
      estoolkit-3.8: (main)
      Incoming: 0
      Outgoing: 0
      Handler: 1
      ExtendScript = for all messages
      Targets: 1
      Connector = PCD
      Installed: 0
      Running: 0
      exman-6.0:
      Path = C:\Program Files\Adobe\Adobe Extension Manager CS6\Adobe Extension Manager CS6.exe
      Display Name = Adobe Extension Manager CS6
      MsgAuthentication = ON
      MsgDigest = ON
      ESTK = OFF
      BundleID = com.adobe.exman
      Status = (not running)
      ExeName = Adobe Extension Manager CS6.exe
      Installed: 1
      Running: 0
      Groups = (no groups defined)

  • Help needed to optimize the query

    Help needed to optimize the query:
    The requirement is to select the record with max eff_date from HIST_TBL and that max eff_date should be > = '01-Jan-2007'.
    This is having high cost and taking around 15mins to execute.
    Can anyone help to fine-tune this??
       SELECT c.H_SEC,
                    c.S_PAID,
                    c.H_PAID,
                    table_c.EFF_DATE
       FROM    MTCH_TBL c
                    LEFT OUTER JOIN
                       (SELECT b.SEC_ALIAS,
                               b.EFF_DATE,
                               b.INSTANCE
                          FROM HIST_TBL b
                         WHERE b.EFF_DATE =
                                  (SELECT MAX (b2.EFF_DATE)
                                     FROM HIST_TBL b2
                                    WHERE b.SEC_ALIAS = b2.SEC_ALIAS
                                          AND b.INSTANCE =
                                                 b2.INSTANCE
                                          AND b2.EFF_DATE >= '01-Jan-2007')
                               OR b.EFF_DATE IS NULL) table_c
                    ON  table_c.SEC_ALIAS=c.H_SEC
                       AND table_c.INSTANCE = 100;

    To start with, I would avoid scanning HIST_TBL twice.
    Try this
    select c.h_sec
         , c.s_paid
         , c.h_paid
         , table_c.eff_date
      from mtch_tbl c
      left
      join (
              select sec_alias
                   , eff_date
                   , instance
                from (
                        select sec_alias
                             , eff_date
                             , instance
                             , max(eff_date) over(partition by sec_alias, instance) max_eff_date
                          from hist_tbl b
                         where eff_date >= to_date('01-jan-2007', 'dd-mon-yyyy')
                            or eff_date is null
               where eff_date = max_eff_date
                  or eff_date is null
           ) table_c
        on table_c.sec_alias = c.h_sec
       and table_c.instance  = 100;

  • Help needed with itunes

    help needed with itunes please tryed to move my itunes libary to my external hard drive itunes move ok and runs fin but i have none of my music or apps or anything all my stuff is in the itunes folder on my external hard drive but there is nothing on ituns how do i get it back help,please

    (Make sure the Music (top left) library is selected before beginning this.)
    If you have bad song links in your library, hilite them and hit the delete button. Then locate the folder(s) where your music is located and drag and drop into the large library window in iTunes ( where your tracks show up). This will force the tunes into iTunes. Before you start, check your preferences in iTunes specifically under the"Advanced" tab, general settings. I prefer that the 1st 2 boxes are unchecked. (Keep iTunes Music folder organized & Copy files to iTunes Music folder when adding to library). They are designed to let iTunes manage your library. I prefer to manage it myself. Suit yourself. If there is a way for iTunes to restore broken links other than locating one song at a time I haven't found it yet. (I wish Apple would fix this, as I have used that feature in other apps.) This is the way I do it and I have approx. 25,000 songs and podcasts and videos at present. Hope this helps.

  • Urgent help needed with un-removable junk mail that froze Mail!!

    Urgent help needed with un-removable junk mail that froze Mail?
    I had 7 junk mails come in this morning, 5 went straight to junk and 2 more I junked.
    When I clicked on the Junk folder to empty it, it froze Mail and I can't click on anything, I had to force quit Mail and re-open it. When it re-opens the Junk folder is selected and it is froze, I can't do anything.
    I repaired permissions, it did nothing.
    I re-booted my computer, on opening Mail the In folder was selected, when I selected Junk, again, it locks up Mail and I can't select them to delete them?
    Anyone know how I can delete these Junk mails from my Junk folder without having to open Mail to do it as it would appear this will be the only solution to the problem.

    Hi Nigel
    If you hold the Shift key when opening the mail app, it will start up without any folders selected & no emails showing. Hopefully this will enable you to start Mail ok.
    Then from the Mail menus - choose Mailbox-Erase Junk Mail . The problem mail should now be in the trash. If there's nothing you want to retain from the Trash, you should now choose Mailbox- Erase Deleted Messages....
    If you need to double-check the Trash for anything you might want to retain, then view the Trash folder first, before using Erase Junk Mail & move anything you wish to keep to another folder.
    The shift key starts Mail in a sort of Safe mode.

Maybe you are looking for

  • Saving iMovie 4 projects on an external hard drive

    I'm starting the ambitious project of copying our family videos from 8mm tapes to iMovie to eventually making DVDs. since I don't have much disk space on my iBook, my plan is to put the iMovie files on an external hard drive & work from there. Here a

  • Mic input sound dropping in some apps?

    I can't figure out what the cause might be, but my mic, an old Apple (mini pin jack, I think) mic connects to an iMic USB Audio Interface. For some reason on reboot or turning on games like Call of Duty 4, the sound input drops to near zero, and I ha

  • Drag and Drop not working properly in Query

    Hi, In my Query, I have Material and Segment as characteristics in the rows. I have Calendar day in Free char. After executing the query, If I drag Calendar day and drop it between material and segment, Instead of coming in between the two characteri

  • Recently restored iPod 5G 32G by iTunes

    Worked until I got finished with new set up. It crashed when it asked me to redownload all of my games. Now it won't get out of recovery mode. Should I go to the Genius bar or try to restore it again?

  • JDBC not working with jar or applet

    I managed to get the JDBC driver (com.mysql.jdbc.Driver) working just fine for a regular java application. However, when I tried to pack the program into an executable jar file, I once again get the "java.lang.ClassNotFoundException: com.mysql.jdbc.D