Help needed in Print List Archiving

Hi Experts,
I have archiuved the Print or Spool List and I am able to see that in the OADR Transaction.
While tring to open document from storage I am getting this error : <b>"Error calling application via OLE ALVIEWER.APP"</b>.
What is the cause of this error. Please help in rectifying it.
Regards,
Arul Jothi. A.

Hi Arul,
The message shows that the IXOS Viewer was not being installed in your machine.
You may request the IXOS Viewer installer from OpenText directly. Or another workaround is to change the printlist display using SAPGUI from TA OAA3. But is might not be a good idea as SAPGUI only allowed to display upto certain number of pages only.

Similar Messages

Help needed in printing in java

hello everyone, i m in grave need of a solution of printing a java page. I have a page designed in Java swings which contains mainly labels and textareas. And i need to print this page. The problem is that I have no clue how to go ahead. Cud neone arnd pls help me on this matter asap as this is very urgent. I shall be highly obliged to all the takers on this issue. Please email me at [email protected]
Thanks and kind regards,
Rahul.

http://java.sun.com/docs/books/tutorial/2d/printing/index.html

Print List Archiving

hi,
When i see job log for print list link, i am getting messgae as
Print list size exceeds 2 GB limit in spool system.
How to reduce the size of print list.

Hi Soyab,
The note does exist:
Summary
Symptom Before you use RSBCS_REORG: After you implement this note, you must also implement Note 1003894 (RSBCS_REORG: Corrections).
You need to reorganize the data relevant to the sending of documents or the use of SAPoffice/Business Workplace.
Send requests, which are displayed using transaction SOST, are no longer required and should be deleted.
The related tables (SOOD, SOOS, SOC3, SOFFCONT1, BCST_SR, BCST_CAM and so on) are increasing over time. Part of the data is not required and should be deleted.
Other terms
Reorganization, SBWP, SOST, send request, RSBCS_REORG
Reason and Prerequisites
You could do the reorganization previously using the RSCBCSRE03 report. Depending on the volume of data and release level, you must also start the RSSORE00 report. These reports do not perform this task, however, because they
have too few selection criteria
release dependent references mutually and therefore, may need to be started several times in turn to delete all data.
issue too little information relating to deleted and non-deleted data.
This note is valid for releases as of Release SAP_BASIS 620. Note 922565 is valid for Release SAP_BASIS 4.6C.
Solution
This note includes a new report RSBCS_REORG, which includes all of the functions of RSBCSRE03 (and those of the reports RSBCSRE00, RSBCSRE01, RSBCSRE02 that are called) as well as those of report RSSORE00. All of these reports have become obsolete due to report RSBCS_REORG, and should no longer be used. Reports RSSORE01 and RSSORE02 are also obsolete.
Due to the very extensive corrections, we recommend that you import the relevant Support Package to use the report.
You can also implement the corrections using Note Assistant 2.0, that is, for SAP_BASIS 620 as of SAPKB62055, and for SAP_BASIS 640 as of SAPKB64013, as well as for higher release levels. This new solution is not provided for lower Support Package levels, for which reports RSBCSRE03 und RSSORE00 must still be used. The reason for this is that you must create several new classes that will be used by RSBCS_REORG. Therefore, it is also not sufficient to create the report manually.
You are also restricted when you use the report with Note Assistant due to missing texts that should have been translated (several texts are only available in English).
For more information about the use of the report and reorganization in the Business Communication Services area, see the related notes.
Read this information carefully, because deleted data cannot be restored!
Report RSBCS_REORG
The report RSBCS_REORG always assumes that a document is to be deleted, since send requests can only be deleted if the related document is deletable.
The report reads all the main documents that fulfill the selection criteria, and checks if these and possibly related send requests can be deleted. If the checks show that no uses exist, all related data will be deleted. In the output of the report, the number of selected and deleted (and to be deleted) documents are output.
The setting options in the selection screen are described below.
Reorganization mode
      Here you can set which documents are to be reorganized: Documents for which send requests exist, or documents for which no send requests exist. Both options are selected by default, which corresponds to the behavior of the report RSBCSRE03 as of Release SAP_BASIS 640. We recommend this setting because it is the best setting for selecting the data. If only documents without send requests are to be reorganized, this corresponds to the behavior of report RSSORE00. If none of the fields are selected, nothing is deleted.
Selection period
          o Specify creation date
            If this field is selected, you can specify the creation date of the documents in the fields below.
          o Specify age in days
            If this field is selected, two other fields are displayed in which you can specify the age of documents relative to the actual date. The system determines the related creation date during runtime (or by choosing <ENTER>). If you double-click an input field, you can (as with all selection options) choose free selections. With the setting "Larger", for example, you can select "Delete documents that are older than 90 days".
Further restriction of choice
      By choosing "Document data" and "Send requests", you can restrict the selection further.
          o Document class, object year, object number
            These correspond to the ID of the document on the database (table SOOD). A document can be clearly identified in this way. The object year is a number, which begins in 1975 with 0 Therefore, object year 30 is the year 2005. You can find values for the fields mentioned above in transaction SOST (for example), by choosing 'Details' for a send request. Note that you can create main documents only. The definition of attachments is also created in the SOOD. However, documents are only deleted together with the respective main document.
          o Address type and status code
            Note that these attributes are recipient-dependent. If values are entered in these fields, a document may not be deleted if more recipients with other values still exist.
          o Expired send requests
            If the field "Only expired send requests" is selected, only documents whose related send requests have an expired expiry date or documents that have been selected explicitly for deletion are deleted. Send requests without an expiry date are not deleted.
Options
          o Maximum number of hits
            The maximum number of hits can limit the runtime. Note that the data is not read in a sorted manner from the database, so that not only the oldest documents are created if the maximum number of hits is restricted. The maximum number of hits corresponds to the selected and not the deleted documents. In principal, we recommend that you restrict the maximum number of hits using the selection period.
          o Packet size
            The packet size determines the number of data records that can be read, checked and deleted by the database at one time. In the productive run, a database commit occurs after each packet. An increase in the packet size can produce an increase in performance, whereby more working memory is also required however. Depending on the volume of data and the database system used, small values can also lead to better performance.
          o Detailed output
            If you set the "Detailed Output" option, more details related to the selected documents are displayed. If the field is selected, the number of documents to be deleted per year is output. Furthermore, the number of documents per year that cannot be deleted for certain reasons is output. You can display a list of the respective documents by double-clicking in the online run. If you double-click a document in this list, all uses for this document are displayed.
          o Test mode
            If the "Test mode" field is selected, no database changes are carried out, but the entries to be deleted are counted and output. All specified counters are approximate values in the test mode, and since no deletions are carried out, the values can deviate from those of the productive run. Furthermore, several entries cannot be created in the test mode (for example, how many address references or Knowledge Provider documents are to be deleted).
There is a problem with system performance.
As with the preceding reports, we recommend that you regularly schedule the report RSBCS_REORG as a background job. If a large amount of data has accumulated, you can expect a correspondingly long runtime.
Packet size
      As already aforementioned, the setting of the packet size can produce an improvement in the runtime, whereby no general rule can be given here. The default value of 500 has proved to the best on average during tests on different systems with different databases.
Database indices
      The main selection of data occurs in table SOOD. The selection options under "Selection period" and "Document data" correspond directly to fields of this table. The database index DAT for field SOOD-MANDT and SOOD-CRDAT are therefore delivered with the Support Package related to this note. Since the date is the most important selection option, you should create this index manually, and activate it when you implement the corrections using Note Assistant.
Database statistics
      These statistics should be current when the report is running. This is valid at least for the following tables:
      SOOD, SOOS, SOES, SOFM, BCST_SR, SRBCSBREL
Header Data
Release Status:     Released for Customer
Released on:     05.06.2007 07:49:11
Priority:     Correction with low priority
Category:     Program error
Primary Component:     BC-SRV-COM Communication Services: Mail, Fax, SMS, Telephony
Affected Releases
Software
Component
Release
From
Release
To
Release
And
subsequent
SAP_BASIS
60
620
640
SAP_BASIS
70
700
700
Correction delivered in Support Package
Support
Packages
Release
Package
Name
A1S_BCC
100
SAPK-10008INA1SBCC
A1S_BCC
100
SAPK-10009INA1SBCC
SAP_BASIS
620
SAPKB62061
SAP_BASIS
640
SAPKB64020
SAP_BASIS
700
SAPKB70011
Corrections Instructions
Correction
Instruction
Valid
from
Valid
to
Software
Component
Type *)
Ref.
Correction
Last
Modifcation
517872
620
620
SAP_BASIS
C
Y6BK078674
07.11.2006 08:32:58
518003
640
700
SAP_BASIS
C
Y6DK055623
07.11.2006 08:35:45
*) C Korrektur, B Vorarbeit, A Nacharbeit, M noch nicht bestimmte Arbeit
Related Notes
     1089838 - Deleting BCST_CAM entries
     1071387 - Several entries in the tables SOCX and SOCY
     1003894 - RSBCS_REORG: Corrections
     988057 - Reorganization - Information
     922565 - Reorganisation - New report (4.6C)
     569123 - Reorganizing documents from generic object services
Print Selected Notes (PDF)
Causes - Side effects
The following SAP Notes correct this Note / Patch
Note
reason
From
Version
To
Version
Note
solution
Version
Support
Package
966854
1003894

Help needed for print layout action.

Hello, I have a set of 300 or so photos I need to print at work. I work on a large lazer photographic processor capable of doing 50 inch wide prints by however long I need. I would like to set up an action to layout these photos on a page so that I dont have to copy and paste each one on a page by hand.
The photos are all the same size. Basically I want to do what contact sheet automation does however I need it to be the full size of the photos not just thumbnails. Just set a document size and have it layout the photos on it untill they are done then I can rip it and print it from my printer. If anyone could help or point me in the right direction that would be great.

I would use InDesign for this.
Make your sheet size, then load the place cursor with as many images that fit on a page.
now just place the images the way you want them.
Print.

Set-up help needed to print from HPJ4580 via Time Machine

This should work but I can't seem to make it!
My HPJ4580 prints fine directly from my MacBook Pro but when I go through the steps to connect and print using the USB connection on the Time Capsule (so my husband and I can both print wirelessly) the printer is not found.
Any ideas on what I'm doing wrong??
THANKS!

OK, so between your helpful prompts and my brain finally operating more satisfactorily I have sorted it.
Turns out I hadn't selected the proper printer driver - I just selected what looked like the right printer name, which of course was the one I had used from when the printer was connected directly to my computer, hence the wrong location (my MacBook Pro).
I fixed that by clicking the + button on the bottom left of the list and added the printer again but this time with "Kind' being Bonjour so that it now appears in the available printer list with Time Machine identified as the location.
Et voila... fully operational!
Thanks for nudging me along.

Help needed in linked lists...

I have been working on this computer assignment lately but I still don't understand linked lists yet..I did an assignment on array based implementation and now I am supposed to do the same thing in linked list implementation..
I need help on how to change this into a linked list implementation..any help would be appreciated. Thank you..below is the code for the array based implementation..the only thing that needs change here is after where is says Array-based implementation of the ADT list.
public class ListArrayBasedDriver {
public static void main(String [] args) {
    ListArrayBased myGroceryList = new ListArrayBased();
    myGroceryList.add(1,"milk");
    myGroceryList.add(2,"eggs");
    myGroceryList.add(3,"butter");
    myGroceryList.add(4,"pecans");
    myGroceryList.add(5,"apples");
    myGroceryList.add(6,"bread");
    myGroceryList.add(7,"chicken");
    myGroceryList.add(8,"rice");
    myGroceryList.add(9,"red beans");
    myGroceryList.add(10,"sausage");
    myGroceryList.add(11,"flour");
    printList(myGroceryList); //print out original List
    System.out.print("numItems is now: " + myGroceryList.size() + "\n");
    System.out.println("adding juice for 5th item...");
    myGroceryList.add (5, (Object) "juice"); //add juice
    System.out.println("item 5 is: " + myGroceryList.get(5)); //get position 5
    printList(myGroceryList);
    System.out.print("numItems is now: " + myGroceryList.size() + "\n");
    System.out.println("removing juice...");
    myGroceryList.remove (5); //remove item at position 5
    printList(myGroceryList);
    System.out.print("numItems is now: " + myGroceryList.size() + "\n");
public static void printList(ListArrayBased myList)
        //method prints a list, numbering the values, e.g, "1. milk" .... "5. juice".... etc.
        int i;
        for(i=1; i <= myList.size(); i++)
            String tempString = new String((String)myList.get(i));
            System.out.println(i+" "+ tempString);
// Array-based implementation of the ADT list.
class ListArrayBased {
    private static final int MAX_LIST = 50;
    private Object items[]; // an array of list items
    private int numItems; // number of items in list
    public ListArrayBased()
    // creates an empty list
         items = new Object[MAX_LIST];
         numItems = 0;
    } // end default constructor
    public boolean isEmpty()
      return (numItems == 0);
    } // end isEmpty
    public int size()
       return numItems;
    } // end size
    public void removeAll()
      // Creates a new array; marks old array for
      // garbage collection.
      items = new Object[MAX_LIST];
      numItems = 0;
    } // end removeAll
    public void add(int index, Object item) throws ListIndexOutOfBoundsException
      if (numItems > MAX_LIST)
        throw new ListException("ListException on add");
    } // end if
      if (index >= 1 && index <= numItems+1)
        // make room for new element by shifting all items at
        // positions >= index toward the end of the
        // list (no shift if index == numItems+1)
        for (int pos = numItems; pos >= index; pos--) {
          items[translate(pos+1)] = items[translate(pos)];
      } // end for
      // insert new item
      items[translate(index)] = item;
      numItems++;
      else
      { // index out of range
        throw new ListIndexOutOfBoundsException(
         "ListIndexOutOfBoundsException on add");
      } // end if
    } //end add
    public Object get(int index) throws ListIndexOutOfBoundsException
      if (index >= 1 && index <= numItems)
        return items[translate(index)];
      else
      { // index out of range
        throw new ListIndexOutOfBoundsException(
          "ListIndexOutOfBoundsException on get");
      } // end if
    } // end get
    public void remove(int index) throws ListIndexOutOfBoundsException
      if (index >= 1 && index <= numItems)
        // delete item by shifting all items at
        // positions > index toward the beginning of the list
        // (no shift if index == size)
            for (int pos = index+1; pos <= size(); pos++) {
                items[translate(pos-1)] = items[translate(pos)];
      } // end for
      numItems--;
      else
      { // index out of range
        throw new ListIndexOutOfBoundsException("ListIndexOutOfBoundsException on remove");
      } // end if
    } // end remove
    private int translate(int position) {
    return position - 1;
   } // end translate
} // end ListArrayBased
class ListException extends RuntimeException
public ListException(String s)
    super(s);
} // end constructor
} // end ListException
class ListIndexOutOfBoundsException
            extends IndexOutOfBoundsException {
public ListIndexOutOfBoundsException(String s) {
    super(s);
} // end constructor
} // end ListIndexOutOfBoundsException

Could someone check for me if this will work and if it doesn't what I need to do to make it work..Thanks...
public class ListArrayBasedDriver {
public static void main(String [] args) {
    ListArrayBased myGroceryList = new ListArrayBased();
    myGroceryList.add(1,"milk");
    myGroceryList.add(2,"eggs");
    myGroceryList.add(3,"butter");
    myGroceryList.add(4,"pecans");
    myGroceryList.add(5,"apples");
    myGroceryList.add(6,"bread");
    myGroceryList.add(7,"chicken");
    myGroceryList.add(8,"rice");
    myGroceryList.add(9,"red beans");
    myGroceryList.add(10,"sausage");
    myGroceryList.add(11,"flour");
    printList(myGroceryList); //print out original List
    System.out.print("numItems is now: " + myGroceryList.size() + "\n");
    System.out.println("adding juice for 5th item...");
    myGroceryList.add (5, (Object) "juice"); //add juice
    System.out.println("item 5 is: " + myGroceryList.get(5)); //get position 5
    printList(myGroceryList);
    System.out.print("numItems is now: " + myGroceryList.size() + "\n");
    System.out.println("removing juice...");
    myGroceryList.remove (5); //remove item at position 5
    printList(myGroceryList);
    System.out.print("numItems is now: " + myGroceryList.size() + "\n");
public static void printList(ListArrayBased myList)
        //method prints a list, numbering the values, e.g, "1. milk" .... "5. juice".... etc.
        int i;
        for(i=1; i <= myList.size(); i++)
            String tempString = new String((String)myList.get(i));
            System.out.println(i+" "+ tempString);
// Linked List-based implementation of the ADT list.
class ListNode
     //class to represent one node in a list
     class ListNode
          //package access members; List can access these directly
          Object data;
          ListNode nextNode;
          //contructor creates a ListNode that refers to object
          ListNode( Object object)
               this( object, null );
          } //end ListNode one-argument constructor
          //constructor creates ListNode that refers to
          // Object and to the next ListNode
          ListNode ( Object object, ListNode node)
               data = object;
               nextNode = node;
          // end ListNode two-argument contructor
          //return reference to data in node
          Object getObject()
               return data; // return Object in this mode
          //return reference to next node in list
          ListNode getNext()
               return nextNode; // get next node
          } // end method getNext
} //end class ListNode
//class List Definition
public class List
     private ListNode firstNode;
     private ListNode lastNode;
     private String name; // string like " list " used in printing
     //contructor creates empty List with " list " as the name
     public List()
          this(" list ");
     } //end List no-arguement constructor
//contructor creates an empty list with a name
public List( String listName )
     name = listname;
     firstNode = lastNode = null;
} //end List no-arguement contructor
//insert Object at front of List
public void insertAtFront ( object insertItem )
     if ( isEmpty() ) //firstNode and lastNode refer to same object
          firstNode = lastNode = newListNode( insertItem );
     else // firstNode refers to new node
          firstNode = new ListNode ( insertItem, firstNode );
} // end method insertAtFront
// insert Object at end of List
public void insert AtBack ( Object insertItem )
     if ( isEmpty() ) //firstNode and lastNode refer to same object
          firstNode = new ListNode ( insertItem );
     else // firstNode refers to new node
     firstNode = new ListNode (insertItem, firstNode );
} // end method insertAtFront
// insert Object at end of List
public void insertAtBack ( Object insertItem )
     if ( isEmpty() ) //firstNode and LastNode refer to same Object
          firstNode = lastNode = new ListNode ( insertItem );
     else // lastNode = lastNode.nextNode = new ListNode ( insertItem );
} // end method insertAtBack
//remove first node from List
public Object removeFromFront() throws EmptyListException
     if( isEmpty() ) //throw exception if list is empty
     throw new EmptyListException( name );
     object removedItem = firstNode.data; //retrieve data being removed
// update references firstNode and lastNode
if (firstNode == lastNode )
     firstNode =lastNode = null;
else
     firstNode = firstNode.nextNode;
     return removedItem; // return removed node data
} //end method removeFromFront
//remove last node from List
Public Object removeFromBack() throws EmptyListException
     If ( isEmpty() ) // throw exception if list is empty
          throw new EmptyListException( name );
     Object removedItem = lastNode.data; // retrieve data being removed
     // update references firstNode and lastNode
     If ( firstNode == lastNode )
          firstNode = lastNode = null;
     else // locate new last node
          ListNode current = firstNode;
          // loop while current node does not refer to lastNode
          while ( current.nextNode != lastNode )
               current = current.nextNode;
          lastNode = current; // current is new lastNode
          current.nextNode = null;
     } // end else
     return removedItem; // return removed node data
} // end method removeFromBack
// determine whether list is empty
public boolean isEmpty()
     return firstNode == null; // return true if list is empty
}     // end method isEmpty
//output List contents
public void print()
     if (isEmpty() )
          System.out.printf(�Empty %s\n�, name );
          return;
     System.out.printf(�The %s is: �, name );
     ListNode current = firstNode;
     //while (current != null )
          System.out,printf(�%s �, current.data );
          current = current.nextNode;
     } //end while
     System.out.println( �\n� );
} //end method print
} end class List

Help needed with print booklet in indesign

Help! When I attempt to print a 24 page booklet, indesign does not place my last page opposite my first page, and instead adds multiple blank pages to my document. I have the printer option to print blank pages on and I am using a multiple of four to compose my document. Any advice or guidance is much appreciated!

You need to ask in InDesign
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Help needed with printer settings for wired ethernet connection

I'm hoping someone can help me with a network printing issue. I have a large format color laser printer (Tektronix Phaser) and since moving to OS 10.6 I can't figure out how to configure the printer so that the system sees it. I have a simple wired ethernet network with a couple of Macs and a couple of printers. All devices are connected via a switch. When using earlier OSs I was able to connect to the Phaser using Ethertalk. Obviously this is no longer supported and I can't figure out how to set the printer so the OS can see it. I have lots of options which can be turned on or off and in some cases set up in other ways: Ethertalk, IPX, Netware, TCP/IP, DNS, LPR, HTTP and remote internet printing, I've tried messing with these but the result is always the same--system doesn't see the printer. Currently Ethertalk is on, IPX and Netware are off, TCP/IP is on, DNS and LPR are on, as are AppSocket, HTTP, FTP and remote internet printing. I can change the IP address but no matter what address I've tried I cannot ping the printer. (I'm using a Gutenprint driver for this printer.)
I don't really know enough about all this to get anywhere and I haven't been able to find help anywhere even from tech friends. Xerox won't help me and neither will Apple. Any help would be appreciated. I can supply more detail on specifics where necessary. Thanks, Bob

Old Phaser models may becoming more and more difficult to use, but you can give this a try.
1. Configure the printer via front panel to use TCP/IP and enable DHCP if it's supported. If not then you will need to configure an IP address for the printer together with your local network's mask, and gateway IP address. Except for the first the others will be provided by opening Network preferences to see what those settings are. The printer's IP address needs to be set somewhere within the range of IP addresses your router provides locally.
2. You need the PPD file required for your printer. If you have the Phaser driver installer you can use it to install the PPD or you can extract the specific PPD from the installer package. This part is tricky because I don't know where you may find the driver now if you don't have the installer. The older installers can be accessed through the Finder by selecting the package then CTRL- or RIGHT-click and select Show Package Contents from the contextual menu. You can then rummage through the package to search for the PPD for your printer. Then navigate to the /Library/Printers/PPD/Contents/Resources/ folder and drop the PPD file inside.
3. Open Print & Fax preferences and click on Add [+] to add a new printer. Click on the IP icon in the toolbar. Select Line Printer Daemon - LPD from the Protocol drop down menu. Input the IP address you assigned the printer in the Address field. You can file in the optional fields that follow. Then from the Print Using drop down menu locate the listing for your printer and select it.

**HELP** Need to print keynote with each slide taking the full page

I just put a keynote presentation together and saved it as a powerpoint. Now that I am trying to print it, the slide only takes a small portion of the page. I need to make sure the slide fits standard letter size and fits the whole page. I want to print one slide per page and have a presentation tomorrow. please help and thank you

Welcome to the forums!
You don't give any detail - what, exactly, you are doing (keystrokes, etc.), which program you're trying to print from (KN or PP), and what your settings are, so I'll guess: you're trying to print from KN. When you try to PRINT, in the window which appears you have checked "Slides with Notes". Those notes, even if there's nothing written there, are probably what's taking away space from the slide on your print-out. Instead, check "Individual Slides" (you should see the results of this reflected in the example print-out on the left: the slide should now take up most of the page, rather than just the upper portion of it). To make your slide even a bit bigger, make sure "Use page margins" (under OPTIONS) is unchecked.
If I've guessed wrong, or my solution doesn't work, come back with more details.
Good presentation!

Help needed in printing pc to pc (printer) using bluetooth

I require to create a application in final year in which i have to print from my pc to another persons pc who has a printer attached (both pcs are bluetooth enabled using bluetooth dongles using Microsoft stack)
Do i have to use java rmi ??
How do i implement this ?? plz i need help !!!

Adrian, the GIMP Print drivers might have been
installed automatically when Tiger was installed on
your computer. They are for older model printers
whose own drivers aren't native for Tiger. They
might interfere with a printer's own driver from the
printer maker.
I think you may have supplied a link to the Epson incompatibility before spacesuiter. Could you please refresh my memory. I seem to recall the problem was a color shift that was noted on the higher end Epson printers. I have heard of no other specific problems associated with any manufacturer's drivers and any third party drivers including the Gutenprint drivers. I will say that the Epson drivers seemed flawed. They cannot see my SP 1280 if I have my Epson SC 800 attached with a parallel to USB adapter -- even an Epson adapter. That is not a problem with the Gutenprint drivers. As soon as I unplug the SC 800, the SP 1280 functions fine with the Epson drivers.
In Adrian's case, it appears to me that there is no provision in the Canon PPD for printing black. This is more than a color shift problem. The PPD for the BJC-2100 included with the Gutenprint drivers does contain provisions for Grayscale and Black(inverted grayscale) printing.
Matt

Help needed in printing interactive form

Hi Friends
I just developed an application which access ECC
can any one guide me to print the output pdfform
i have opened result interactive form and placed a print button ...next which script i should use? formcalc or
java script..since my application is a java webdynpro .
can you give me the piece of code for that..formcalc
already got the script..but i dont know the exact java script for printing.
plz help me in this issue
vivek chandra

Hi Raja
Thanks for that stuff..very helpful
i have 3 inputfields on one of my interactive form
i was asked to fill those fileds with predefined data
so that once the app is run, input form fields should
dispaly the predefiend values.in wdinit method i could
do that using wdContext.currentelement.setName("xxx");
i have 3 fields..three are text fields.from the third field need to eneter the date,its a PO Bapi..i did context binding ..i could drag the input fields..
but when iam trying to set predefiend date for the
3rd field..its not accepting it..since it is of type
date.. do i need to create any data type for the 3rd field in javadictionary????plz guide me in this issue
regards
vivek chandra

Help needed with xml list

hi,
i need to make a list in which all the list items will come
from xml file. these items will also be clickable so that they open
a new respective hyperlink on click. i need something like
www.sponky.com ' s portfolio list. can somebody please help me? i
really need your help.
thanks,
gaurav

I'm hoping I understand what you're doing... I would probably
do it all in one frame and just toggle the .visible property of the
subcategory list after the first one has been clicked, but there's
no rules about how you do it.
Without being sure, I think what you may have done is put a
second "copy" of the category list on another keyframe, which
replaces the previous instance. By taking away the second copy it
should work. If that's not the case, then I'm stumped... otherwise
read on.
So if you have the category list in its own layer, just have
it in frame one, on frame 2 of the same layer have a frame but
not a keyframe. This will mean the instance in frame one is
still the same one when the playhead gets to frame 2.
And have the subCategory list on a separate layer, it appears
on frame 2...
BTW the .getSelectedItem() method of the list reminds me of
flash mx... is that the version you're using (curiosity only I
don't think its relevant, because its obviously working).

Help Needed on Printing

Hello im a very new junior sd consultant and I have gotten my first issue ticket which I need to try and resolve. Basically, the client has an issue when they want to print the 1.Sales Return document and its 2.Delivery document. they have to keep manually choosing the printer. How can I configure the printer settings for the returns document and its delivery so that for each new sales return document the default printer is already chosen and all they have to do is press enter for example and it prints.
The current scenerio is that for example, sales return document 000000001. In va02 on the initial screen if you go to sales document, then issue output to. I get this popup when I do those steps "No output has been selected for printing". The client then has to go and assign the printer manually for each document which takes up too much time. How can the printer be assigned by default to that document type?
Thanks in advance

Hi Muhammad,
Please maintain the condition records to that output condition types in VV11 transaction for sales orders and VV21 for delivery document output.
In condition record itself you can maintain the printer.
If you maintain the data in the condition record output will come automatically while creating order or while creating delivery.
I hope it will help you,
Regards,
Murali.
Edited by: Murali Mohan.Tallapaneni on Jul 8, 2008 10:24 AM

Help - how to print list of audiobooks

I have a lot of audiobooks in iTunes. I would like to print a simple text list of the titles to a file. So far the only solution I have found is to print a .pdf file from the print command that ends up with a VERY large .pdf file complete with art work. How can I get a nice small text file? Thanks!

Select the list, Command + P > check Song Listing. This will allow you to print the list. If you need to copy and paste the text into a text file, just select your Audiobook list, Select All, Copy and Paste into a text file. (Please note that you may want to adjust or turn on/off certain columns, as this will copy info from every column that you have turned on in the View for that playlist.)

Help - need to print borderless 8x10

I am trying to print a borderless 8x10 pic from my iMac to my Canon i900d printer. I've done it before, but it's been awhile and now every time I try to print I get a 2mm border all around the picture. Again, I want the pic to be borderless, so any help would be greatly appreciated. Thanks.
Michael

Welcome to the forums!
You don't give any detail - what, exactly, you are doing (keystrokes, etc.), which program you're trying to print from (KN or PP), and what your settings are, so I'll guess: you're trying to print from KN. When you try to PRINT, in the window which appears you have checked "Slides with Notes". Those notes, even if there's nothing written there, are probably what's taking away space from the slide on your print-out. Instead, check "Individual Slides" (you should see the results of this reflected in the example print-out on the left: the slide should now take up most of the page, rather than just the upper portion of it). To make your slide even a bit bigger, make sure "Use page margins" (under OPTIONS) is unchecked.
If I've guessed wrong, or my solution doesn't work, come back with more details.
Good presentation!

Help needed in Print List Archiving

Similar Messages

Maybe you are looking for