Help needed in restricting access

Hi all,
Please recommend me a procedure to remove an access from a transaction code.
The scenario is for transaction CC31-Create Change Request i need to remove the access for a set of users the "Approve ECR" status that which appears in the Set Status page.
Kindly send me your valid advice.
Expecting your kind response
Vineeth

Hi Ashok,
Thanks for your quick reply, but my problem is not solved yet.
I created a role with the T-Code CC31, searched for the field "RLKEY".
When trying to remove the CHECK from the GlobalReleases option the option is not working. I am neither able to choose any of the options or remove the checked option.
Hope you understand.
Though the field "Release Key for Change Master" is kept open, the user assigned has the access to the "APPROVE ECR" task.
I am not able to understand the concept of RLKEY's is there further need for options through customization?
Can you please explain.
Expecting your kind response.
Vineeth

Similar Messages

Need to restrict access to multiple servlet applications on same box

Hi!
I have deployed two separate servlet applications to the same IAS. I need
to restrict access to each application - that is requests from one source
should only have access to one application and not the other. The web
server we are using is IIS.
Should I create a separate IAS to deploy the second application to? Can I
restrict based on IP - that is port 80 is reserved to application 1 while
port 81 is restricted to application 2? If so, how do I go about this? It
appears that the web connector only receives on one port (default 80).
Any help would be greatly appreciated.
Sheila

I see. So do you mean that I can override the port number in the proxy startup script itself? I can try doing that and see if it works fine.
About Coherence 3.7, yes. I did see that it has some cool features about proxy discovery. But at this point I am stuck at using 3.6 and 3.6.1.
Edited by: online19 on Jun 29, 2011 5:41 PM

Need to restrict access to XD02/XD03

Hi All,
I need to restrict access to some acct group in the search screens for individuals who do not have access to this account group in transaction XD02/XD03. Other than this group we should not allow to search the screens.
Please guid me if any exit / badi....etc. where i can put this validation.
Thanks.
Raj.

Hi,
Try this link...
Customer Master Maintenace - restriction general data tabs
Regards,
Guru

HT201304 I need to restrict access to Settings on an iPad so settings like VoiceOver cannot be activated while letting them access multiple apps on the device. Is their any way to restrict access to settings without locking the device with a PIN?

I need to restrict access to Settings on an iPad so settings like VoiceOver cannot be activated while letting them access multiple apps on the device. Is their any way to restrict access to settings without locking the device with a PIN?
This is so our guests cannot tamper or disable the device. We are already using Apple Configurator but their does not seem to be a way to lock down settings without a PIN.

There's a lot of restrictions information in Chapter 19 of the 4.2 User Guide.
http://support.apple.com/manuals/#ipad
By the way, a more extensive version of the User Manual is available at no charge through iBooks.

Hi guys I need to restrict access to the settings with a passcode but also need passcode for the screen lock due to MS Exchange. Can these codes be different?

We are introducing iPhonse into the business but have a question regarding security. We need to restrict user access to the settings on the iphone probably via a passcode. We also need the user to have access to their emails (which when using exchange enforces a passcode). Is this the same passcode that is used for both by default? Because if it is then by allowing the user access to their emails they would by default have access to the code that allows them to change the settings of the iphone?
Does anyone have any knowledge of this or how I can achieve something similar.
Thanks
Paul

Hi,
Thanks for your reply
Could you by any chance provide a few simple steps on how to do this as i not too sure how you differentiate creating a passcode for restrictions and creating a passcode for lock screen?
Kind Regards,
Paul

Help! php Restrict Access to Page() in dw cs5 problem

I have an admin.php page which takes me to other pages where i can update my info displayed on the website. All was working well until I added the restrict access to page behaviour. When i log in successfully, I am supposed to be taken to those update pages. If the log in is not successful, I am led back to the login page (the "restricted" page). However, even if I log in successfully, I am being taken to the "restricted" page when I try to access the update pages! I do not understand what is going wrong. Any help?

anb_newbie wrote:
I have a login page which either takes me to the update info page or will take me to the "restricted" page. The problem is even with a successful login, I am taken to the 'restricted' page.
How do you know the login is successful? If you're taken to the restricted page, it means that the login failed.
There doesn't appear to be anything wrong with the code you posted here. Possible reasons for the failure include getting the username or password wrong (they're usually case-sensitive). It's also possible that sessions haven't been enabled on your server, or that PHP can't write to the directory where sessions are stored.

Application And Gaming / Port Forwarding || HELP NEEDED || Can Only Access Via LAN

Hi.
I have just bought a Wireless Router, Model Number: WGKPC354G-UK. With the intention of setting up a small server. This server will run from my PC (directly wired into router), running a game called "Counter Strike" - I had to download a dedicated-server tool for this and i successfuly installed this and followed the tutorial to set it all up..
So I thought i had done it, but I could only access my server with my internal IP 192.168.1.64 (LAN).
I then found out that i needed to "Port-Forward" I followed a tutorial on www.portforward.com - This showed me how to open the ports, and which ones to open.
I did all this and i still encounter the same problem !
So i then opened all my router ports "DNZ" and it still doesnt work !!!
Any help will be greatly aprreciated !
PS. Below Are The Required Ports.
http://portforward.com/english/routers/port_forwarding/Linksys/WAG354G/Counter_Strike.htm

Keep in mind your ISP could be blocking the ports needed. DMZ almost ALWAYS works and if it doesnt, most likely your ISP blocks the ports.
another test is to make sure you can connect to the game server from another CS machine on the inside of your network. If this works, that means your server is up and running properly and its probably your ISP blocking certain ports needed for the CS Server.
You should also check you have the Windows firewall disabled, and any other software firewall on your server disabled.

Help needed for Restricting roles by maintaining values at Profit center

Hi,
My client uses the restriction at Company Code and Cost Center but we were using a * for full authorization to maintain the Profit Center. Now the situation has arisen where we need to maintain a particular Role at Profit Center level. We are creating a new role and maintaining the value of it. But there are a few other Roles where the Profit Center was not maintained and a * (which is already there) will give access to the Profit Center which is actually meant for the new Role.
The Profit Center has values of around 2500 which is going to be difficult to be maintained. Is there any other method where in we can restrict the Roles at Profit Center level by giving some ranges and if it is please let me know the format?
Regards
Shakeel

Hi
There are two methods that you can maintain:
1. Using the Company Code
2. Using the Company Code simultaneously with Profit Center
The approach that we are following is like that: We have created a excel file which contains the segegrated list of Profit Centers according to Company Code.
Now if you provide the range of Company code ( that can be achieved in authorization fields) the profit center related will automaically be associated by giving *.
We can give the range of profit center at two levels....one at the Organizational Level which would give acess to all the authorization objects present in the Role.
Other is give the range at the Authorization Object Level...that would give access to that particular Authorization Object or the Tcodes related to that.
Check out this thread also
How to assign profit center or cost center authorizations ?

Help needed - Can't access OneKey Recovery restoration option after system reboot,

Hi,
I run OneKey Recovery, after I choose "recovery", and system reboot.....system automatically log in Windows 7 again, rather than access OneKey Recovery restoration option.
I am using G570 and OneKey Recovery version is 7. this issue never happened before, it always reboot to OneKey Recovery restoration before....please help. Thanks

You shouldn't need Command + R since the Option key will present you with the Recovery boot volume. Seems something is amiss there, I'm willing to bet you may have been using a wireless keyboard.

Help needed setting up access point to public network

Hi from a newbie,
Assuming they are suitable, I want to use one (or two) AP1232AG-E-K9 access points for Internet connection through a public wireless network (BTFON), where wire broadband is not an option. I've downloaded what I think is the correct manual for the APs and I'm now scratching my head as to where and how to start setting them up. I want to use these Cisco APs in the hope they will give me better wireless performance than I'm currently getting, which is frequently flakey.
I've tried to reset the APs to the factory default but there seem to be different ways of doing this depending on what you want and what you've got. I made up a console cable to access the console but there even appear to be different versions of this so I'm not sure if the cable I have is the correct one.
I have setup and used lower end wireless devices in the past but these Cisco units seem real complicated and I'm going to need help in getting them working.
Any assistance would be much appreciated.
Kind regards,
Glenn.

Updated network diagram.

Help Needed - Remote Disk Access via MobileMe for AEBS

OK, I've done a lot of reading in this forum, but didn't find a resolution to my problem.
Here are my configuration:
1) ADSL Router(2Wire 2700HGV-2) in bridged mode
2) Airport Extreme Base Station (Simultaneous Dualband) with 7.4.1 firmware acting as the router using PPPOE
3) External USB disk formatted using Mac OS format attached to AEBS
Working:
1) Within the LAN, can access the disk without any problem
2) Over the WAN, Back to my Mac works fine for all my Mac computers
Not Working:
Over the WAN, I can see the AEBS in the shared section, however, upon clicking it, it always tells me that the connection failed after about 30 seconds, even when I try to use "connecting as".
Anyone has tried this feature and it worked? Really appreciate if you can help as I am going to be on trip soon and I wish to access the disk from Internet when I am over there.
Thank you!

Hi rekeno
Thanks for your post. I have the exact some problem. I'm sitting at work with my MacBook. At home there's my Airport Extreme and a Mac Pro.
I can see both in my "Shared" section AND they also have different IPv6 tunnel addresses:
[15:07 root@pm1] ping6 macpro.XXX.members.mac.com
PING6(56=4088 bytes) fd22:3569:a8da:4c12:217:f2ff:fed4:6de0 --> fd44:bbdd:fce3:3be9:21d:4fff:fe4b:b80
16 bytes from fd44:bbdd:fce3:3be9:21d:4fff:fe4b:b80, icmp_seq=0 hlim=64 time=54.748 ms
Works.
[15:14 root@pm1] ping6 airport.XXX.members.mac.com
PING6(56=4088 bytes) fd22:3569:a8da:4c12:217:f2ff:fed4:6de0 --> fdfe:d7a4:759a:a360:21b:63ff:fef5:30a2
^C
--- airport.XXX.members.mac.com ping6 statistics ---
3 packets transmitted, 0 packets received, 100% packet loss
This times out.
Interestingly I can use Screen Sharing to my MacPro and do the same:
[15:17 mau@macpro] ping6 airport.XXX.members.mac.com
PING6(56=4088 bytes) fd44:bbdd:fce3:3be9:21d:4fff:fe4b:b80 --> fdfe:d7a4:759a:a360:21b:63ff:fef5:30a2
16 bytes from fdfe:d7a4:759a:a360:21b:63ff:fef5:30a2, icmp_seq=2 hlim=64 time=0.721 ms
This works AND it uses the SAME IPv6 address.
I have also checked that my IPv6 tunnel configuration is allowed in the Airport Utility.
Do you see the same behaviour? Can you run the same commands?
Thanks a lot!
Patrick

Help needed in changing Access query to Oracle query

hello folks,
I have already posted this question and got some help previously but i have additional query being added to the previous one so thought of seeking some help.here it goes
Am having an access report which comes from a query. the current query behind the report is a consolidated one and comes from quite a few tables . My requirement is to develop a crystal report( which comes with a native oracle db driver) which should look same as the access report. But am unable to use the access query becoz of its format or something. So anyone please throw some light on this. Any help would be kindly appreciated.
SELECT Debtor . EVENT_ID,
Debtor . MEDCAP#,
Debtor . Client Name,
Debtor . CLIENT,
Debtor . Provider ID,
Debtor . GROUPNUMBER,
"OPEN" AS Status,
(IIf(clip_file = "Y", "Clip", "Open")) AS clipStatus,
IIf(collect_only = "Y", "Collection Only", "Regular Collections") AS Collect ?,
IIf(IsNull(Principal), 0, principal,
IIf(IsNull(PAR_FLAG), "N", IIf(PAR_FLAG <> "N", "P", PAR_FLAG)) AS PAR_NPAR_FLAG,
Right(PatientMemberID, 2) AS Patient Suffix
FROM Period, Debtor
INNER JOIN LOB_subtypes ON Debtor . SUBTYPE = LOB_subtypes . SUBTYPE
WHERE (((Debtor . CLIENT) = "CV1") And ((Period . PeriodName) Is Not Null) And
((Debtor . STATUS) = "OPEN") And ((LOB_subtypes . LOB) = "PBA"));
Thanks

The expression...
IIf(IsNull(Principal), 0, principal) - IIf(IsNull(PRORATED_TRANAMT), 0, prorated_tranamt)...is equivalent to...
NVL(PRINCIPAL, 0) - NVL(PRORATED_TRANAMT, 0)Does that answer your question?
As for...
IIf(IsNull(PAR_FLAG), "N", IIf(PAR_FLAG<>"N", "P", PAR_FLAG))...you might try...
CASE
    WHEN PAR_FLAG IS NULL THEN 'N'
    WHEN PAR_FLAG != 'N' THEN 'P'
    ELSE 'N'
END

Help needed, i Cant' access any prefs, only eternel wheel of death

Hi,
I've just spent 3 hours at my friend's house last night to help him with is Logic Express and the UX1 (interface.)
He has a G5 1.6 running 10.4.3 with 1.25 gig of ram with the UX1 from Line 6 for his audio interface.
.......Even if logic Express is running fine, we can't access ANY preferences of Logic Express.
The minute we try to open any preferences such as global, midi , the Audio and Driver page, ect... we get the Eternal wheel of Death :-((
We tried with Logic Express 7.0.0, 7.1.0 and 7.1.1 and we have the same problem.
We have deleted all prefs (i think) in case one was corrupted but we still got the same results.
(By reinstalling Logic Express, we were able to have the set-up assistant to open so that we could choose the UX1 for the interface.)
We have update the firmware.
(We can open Prefs in Live, in Garage Band, but not Logic Express.)
i am out of idea......
Any idea !!!
Thanks !!!
G5 dual 2ghz Mac OS X (10.4.1)
G5 dual 2ghz Mac OS X (10.4.1)
G5 1.6ghz Mac OS X (10.4.3)

Hi there,
Funny as I was turning crazy as I have just bought a new mac so new OSX and I was not able anymore to access my preferences in logic. Each time I want to open any of the preferences options, logic was simply freezing(crashing in a way!). I'm downloading at the moment the pro app 3.1 but I think I've already installed it.
And Alelouia !!! This work !!!!
For the info this work without uninstalling 7.1.1
I've just installed the pro app and everything back to normal..
Respect
Mikkael
G5 dual 2Ghz Mac OS X (10.4.3) M-Audio Audiophile firewire, Logic Express 7.1.1, Korg kontrol 49, Emu Proteus

Help needed with class accessing

Hey, i have ran into another problem again.. The problem is accessing a class variable created in a different class from another class.
Im reading an XML file with let's say
class readXML(){
    Items item = new Items();
         //here im setting the variables.
    item.name = "something";
    item.level = "something else";
class Items(){
    Vector<String> name = new Vector<String>();
    Vector<String> level = new Vector<String>();}And now a sepparate class what creates me an object of those variable with a loop.
class makeTable(){
//here i need to get the variables for the loop and to create object.
readXML readXML = new readXML("test.xml");
Object[][] data = new Object[3][24]; public void createObjects(){
for (int j = 0; j < items.length; j++){
data[j][0] = readXML.item.name.get(j); //<--- this does not work. But how can i do it?
data[j][1] = exps[j];
data[j][2] = levels[j];
data[j][3] = getAmount(exps[j]);
//System.out.println("itemname: " + data[j][0]);

Ok, i explained it a bit wrong, ill copy the whole code.
import javax.xml.parsers.*;
import org.xml.sax.*;
import org.xml.sax.helpers.*;
import java.io.*;
import java.util.Vector;
public class ReadItems extends DefaultHandler{
          ReadItems(String filename){
          File input = new File(filename);
          SAXParserFactory factory = SAXParserFactory.newInstance();
          factory.setValidating(true);
          try{
               SAXParser sax = factory.newSAXParser();
               sax.parse(input, new ItemHandler());
          }catch (ParserConfigurationException pce){
               System.out.println("Could not create parser.");
               System.out.println(pce.getMessage());
          }catch (SAXException se){
               System.out.println("Problem with SAX parser.");
               System.out.println(se.getMessage());
          }catch (IOException ie){
               System.out.println("Error reading file.");
               System.out.println(ie.getMessage());
class ItemHandler extends DefaultHandler{
     static int READING_NAME = 1;
     static int READING_LEVEL = 2;
     static int READING_EXPPER = 3;
     static int READING_NOTHING = 0;
     int currentActivity = READING_NOTHING;
     Item item = new Item();
     ItemHandler(){
          super();
     public void startElement(String uri, String localname, String qName, Attributes attributes){
          if(qName.equals("name")){
               currentActivity = READING_NAME;
          }else if (qName.equals("level")){
               currentActivity = READING_LEVEL;
          }else if (qName.equals("expper")){
               currentActivity = READING_EXPPER;
     public void characters(char[] ch, int start, int length){
          String value = new String(ch,start,length);
          if (currentActivity == READING_NAME){
               item.name.add(value);
          if (currentActivity == READING_LEVEL){
               item.level.add(value);
          if (currentActivity == READING_EXPPER){
               item.expper.add(value);
     public void endElement(String uri, String localname, String qName){
          /*if(qName.equals("item")){
               System.out.println("Name: " + item.name);
          }else if(qName.equals("level")){
               System.out.println("Level: " + item.level);
class Item {
     Vector<String> name = new Vector<String>();
     Vector<String> level = new Vector<String>();
     Vector<String> expper = new Vector<String>();
}Now i need to access the data from another class where i build a swing table.
It has a method:
public void createObjects(){
          for (int j = 0; j < items.length; j++){
                    data[j][0] = these should be the values of that name variable;
                    data[j][1] = this should be expper and so on.;
                    System.out.println("itemname: " + ih.item.name.get(0));
     }Im a bit confused on this

Help needed with internet access

I have just aquired a 5800 and I (think) I have turned of the 3G so it will only connect via my home WiFi unless it asks me. However, when I do connect I get a tiny little symbol which looks like 3.5g and the book says it is something to do with "HSDPA". It tells you that a line under it means "supported and active" and that a line through it means "a connection is on hold" but doesn't tell you what if there are no lines, just the symbol and what the flaming hell that means anyway.
My question is - when this is showing, am I doing something that I am being charged for ? On this phone I do not want to do anything chargeable without first being asked, so if anyone understands this minefield of information I would be eternally grateful for your assistance.
Solved!
Go to Solution.

You can't normally switch off internet access via the network through settings, usually you get the following network options:
GSM only (which could could connect to the internet via GPRS)
UMTS only (this is 3G)
Dual mode (which selects 3G if the service is available in the area, otherwise defaults to GSM)
Your phone will always show the GSM or 3G signals if it is in range of such services, this does not mean that you are conencted to the internet by them. If you are connected via WLAN, you will not be charged for internet access over the internet.
One thing to be careful of is that if you leave the range of your WLAN router, the phone can automatically go for the next access available point in the "Destinations" setting, which could be your network. As long as you are in range of the router and it is working fine, you should have no worries.

Help needed in restricting access

Similar Messages

Maybe you are looking for