Help needed in SUI changes testing

HR experts
Some SUI (State unemploymment Insurance) have changed
for example
The SUI rate for state of TEXAS (USA) -Company code ABCD has changed to .10% and for other Company code WXYZ it is .80% effective july 1st, 2008.
How do you test it using Tax reporter (PU19) or is there any other way to test these changes.
Any help is highly appreciated.
Regards
Krishna

Hi Krishna,
Once you have changes the tax rate for texas tax type based on the tax company, you should be able to see this change in PU19 run under quartely SUI wage report form run.
Test it on one or more associate whose is having texas tax type.
In the result/log manager for that run you should be seeing a sap script form (EX: HR_F_UNEMP_GENE for Texas) select its spool number.
This will display you the tax details, see line 9 that talks about the tax rate. it shows as a mutiple of 100.
EX: if tax rate is 0.0010 then on this form it will be 0.10
Hope this will help you.
Regards,
Mamatha

Similar Messages

Help needed in creating O2A test order

Hi
Good wishes
1) As mentioned in help pdf(for o2A installation) - deployed cartridge/AIA emulators in development mode, com and som in same osm instance and osm and AIA in single server
2) I submitted 1 test order (with sample xml)- it got created, i see orchestration plan for that order - everything looks good
3) But when i go to taskweb client - i see it got struck in SyncCustomerSIT task and it is in accepted status.
4) I verified CreateCustomerQueue - it has 1 message
5) But i didn't see any message for createCustomerResponse queue.
Plz help and guide to release 1 test sample order succesfully. (in o2A cartridges).
If you provide xml name - i can use to see succesful completion of order - it'll be great...
Thanks
Sathya

yes, now it is fine. Thanks,
It is moving further.
1 info - now it moves suspended status - 'WaitForProvisioningCompleted'.
I see status comes from automation task - 'ProvisionOrderSIResponseTask'. from Xquery Automator(internal) - InitiateWaitforProvisioningResponseBean
I understand reason for suspending this task is - "this order waiting for confirmation from provision system (External system)"
after getting response from external system - this external automator -"ProvisioningResponseBean" will change the status and order moves further.
Am i right?
1 more question.
Can i get sample xml for BroadbandPRovisioning / VOIP provisioning cartridges?
Thanks
Sathya

Help needed.. Changed HD, 'broken' DVD reader, working recovery disks.. how to?

Hello all, hope someone can help me here. I have a Toshiba Satellite p300-19f, win vista 32 in dotation.
Long story short, the computer has served me well for roughly 3 years now. All at a sudden, on startup when on windows charging page (with win logo and green counter going up), it started freezing.
I tried recovering last working win configuration, I tried recovering precedent backup points, at times I solved until the problem randomly showed up again (same identical problem), so ultimately I formatted and re-installed fresh vanilla version from recovery partition succesfully. Problem went away, until it came back. (all of this in 1 month time span)
It worked ok for a couple weeks, and started giving the same problem again. Ultimately I figured out (I immagine) that the hard drive must have some problems, as this freezing on windows startup (immediately distinguishable as the cpu stops working / the light in front stops twinkling) occured basically randomly, regardless of software installed in the pc, or time since last format.
I decided to change the hard drive, but obviously have the problem of the new operating system. My dvd burner is broken, or at least does not work reliably. I got an external sony burner and through the toshiba disk creator applet made the recovery disks (2 DVDs) successfully.
I changed the hard drive, tried to reboot and reistall using in laptop dvd, when it gets to copy the first big file it gives a CRC error, an aborts the whole thing (sending me to a prompt of commands though.. where I copied the whole content of the DVDs on the just made HDDrecovery folder in v: through the recognized usb external burner, but the computer failed to recognize on later startups).So I tried to boot it up with the recovery disks in the external burner (bios DOES support USB boot), the disks are read, the toshiba applet for recovery is started, and as soon as it gets to the dos-like windows it freezes on "check for medium in drive".
I have the recovery disks, I have a half working dvd reader in the pc that gives errors when copying the big files and aborts installation. I have an external dvd reader that is recognized at boot, starts the installation, but fails to find "the medium"...
I hope I have explained my problem more or less.. what can I do (apart from buying a new working dvd reader for the computer) ?
If there are specific info I need to give on hardware/software, please let me know.
Thanks,

Hello all, hope someone can help me here. I have a Toshiba Satellite p300-19f, win vista 32 in dotation.
Long story short, the computer has served me well for roughly 3 years now. All at a sudden, on startup when on windows charging page (with win logo and green counter going up), it started freezing.
I tried recovering last working win configuration, I tried recovering precedent backup points, at times I solved until the problem randomly showed up again (same identical problem), so ultimately I formatted and re-installed fresh vanilla version from recovery partition succesfully. Problem went away, until it came back. (all of this in 1 month time span)
It worked ok for a couple weeks, and started giving the same problem again. Ultimately I figured out (I immagine) that the hard drive must have some problems, as this freezing on windows startup (immediately distinguishable as the cpu stops working / the light in front stops twinkling) occured basically randomly, regardless of software installed in the pc, or time since last format.
I decided to change the hard drive, but obviously have the problem of the new operating system. My dvd burner is broken, or at least does not work reliably. I got an external sony burner and through the toshiba disk creator applet made the recovery disks (2 DVDs) successfully.
I changed the hard drive, tried to reboot and reistall using in laptop dvd, when it gets to copy the first big file it gives a CRC error, an aborts the whole thing (sending me to a prompt of commands though.. where I copied the whole content of the DVDs on the just made HDDrecovery folder in v: through the recognized usb external burner, but the computer failed to recognize on later startups).So I tried to boot it up with the recovery disks in the external burner (bios DOES support USB boot), the disks are read, the toshiba applet for recovery is started, and as soon as it gets to the dos-like windows it freezes on "check for medium in drive".
I have the recovery disks, I have a half working dvd reader in the pc that gives errors when copying the big files and aborts installation. I have an external dvd reader that is recognized at boot, starts the installation, but fails to find "the medium"...
I hope I have explained my problem more or less.. what can I do (apart from buying a new working dvd reader for the computer) ?
If there are specific info I need to give on hardware/software, please let me know.
Thanks,

Matrix Code Tutorial Help Needed - Symbols wont change

Please could someone help me out with this Flash problem, I would really appreciate it.
I have followed the guide at this link to create a matrix code effect. The matrix code font file is available to download from this site also (mCode15).
Once I get this file up and running and understand how it works, I'm going to tweak it somewhat to suit my needs.
I am, however, experiencing some problems getting it to work as described in the tutorial. I have followed the tutorial to the letter, but when the flash movie file runs, only the glyph symbol that I used to create the_one and one_pod movie symbols is displayed in the code that scrolls down screen. I have embedded the font the way it describes and even added it to the library and set it to export for actionscript using the linkage option. But the matrix code that rains down is still only one symbol which never changes.
Please please help me out with this as I'm slowly losing my sanity trying to figure it out. I am using Flash CS3 on a Windows 7 PC to do this and the file is set up up as action script 2.0.
Many thanks for any help you can provide.
The Action Script code from the site is included below, this is pasted into the 1st frame.
// ---------------------------------------------// The Flash Matrix - www.pixelhivedesign.com// ---------------------------------------------// Initialize variables.maxLines = 25; // Maximum number of lines at once.
minScale = 10; // Minimum scale of a line.
maxScale = 100; // Maximum scale of a line.
// Create an empty Movieclip to hold the Matrix.theMatrix = createEmptyMovieClip('MatrixCode',1);curLines = 0; // Keeps track of the current number of lines.
// ----------------------// Generating the Matrix.// ----------------------theMatrix.onEnterFrame = function(){
// Check that the current number of lines is less than the maximum allowed.
if(curLines <= maxLines){
curLines++; // Increment the number of lines.
// Create a new line.codeLine   = this.createEmptyMovieClip('codeLine',curLines); // Generate a random scale for the line.// This simulates lines at different distances.
var ranScale = Math.round(Math.random() * (maxScale-minScale)) + minScale;codeLine._xscale = codeLine._yscale = ranScale; // Position the line at a random X location.codeLine._x = Math.random() * Stage.width; // Determine line speed based on the distance.codeLine.speed = (codeLine._xscale)/10; // ---------------------------------------------// Creating a line of multiple pods (characters)// ---------------------------------------------codeLine.myCodes = []; // Array to store individual pods.
numPods = 0;       // Number of pods.
while(codeLine._height < Stage.height){
numPods++; // Increment the number of pods.
// Attach a single pod to the line of code.pod = codeLine.attachMovie('one_pod','pod'+numPods,numPods);codeLine.myCodes.push(pod);   // store pod.
// Position pod above the last one (vertical lines)pod._y -= (pod._height+2) * numPods; // Choose a random Matrix character.// Character Codes for lower case letters are between 96 & 123pod.the_one.Neo.text = chr(Math.round(Math.random() * 27) + 96);} // ----------------------------// Initialize the white pulse.// ----------------------------// Store pod position to start at.codeLine.ind = 0;// Store delay between pulses.codeLine.delay = codeLines.myCodes.length; // ------------------------------------// Animating each line of code.// ------------------------------------codeLine.onEnterFrame = function(){
// -------------------------------// Vertical animation of the line.// -------------------------------// Every frame make the line move down by it's speed.
this._y += this.speed; // Check if the line of code has animated off the Stage
if(this._y - this._height >= Stage.height) {
// Yes, so allow an additional line to be generated.maxLines++;// Remove this line and free memory.
this.removeMovieClip();}// ----------------------------// Animating the white pulse.// ----------------------------// Get next pod to affect.
this.curCode = this.myCodes[this.ind];// If the pod is not currently animating, start its animation.
if(this.curCode._currentframe == 1) this.curCode.play();// Check if we have reached the end of the line.
if(this.ind < this.myCodes.length and this.delay != 0){
// No, then move on to next character.
this.ind++;// Decrease the delay before next pulse.
this.delay--;
} else {
// Yes, then reset the character position.
this.ind = 0;// Reset the delay before next pulse.
this.delay = this.myCodes.length;}}}}

When you dynamically add content, it has no home on the timeline unless you anchor it in one. If you were to manually place an empty movieclip on the timeline in the lowest layer and then and then create the matrix stuff in there then you would have it living in the background.
Try creating such a movieclip, located in the upper left corner of the stage and assign it an instance name of "theMatrix"
Then remove the following lines from your existing code (which is otherwise creating that mc dynamically)...
// Create an empty Movieclip to hold the Matrix.theMatrix = createEmptyMovieClip('MatrixCode',1);
That should be all you need to do.

Tweak for sql query - help needed for smalll change

Hi.
I am trying to run a script that checks for used space on all tablespaces and returns the results.
So far so good:
set lines 200 pages 2000
col tablespace_name heading 'Tablespace' format a30 truncate
col total_maxspace_mb heading 'MB|Max Size' format 9G999G999
col total_allocspace_mb heading 'MB|Allocated' format 9G999G999
col used_space_mb heading 'MB|Used' format 9G999G999D99
col free_space_mb heading 'MB|Free Till Max' like used_space_mb
col free_space_ext_mb heading 'MB|Free Till Ext' like used_space_mb
col pct_used heading '%|Used' format 999D99
col pct_free heading '%|Free' like pct_used
break on report
compute sum label 'Total Size:' of total_maxspace_mb total_allocspace_mb used_space_mb - free_space_mb (used_space_mb/total_maxspace_mb)*100 on report
select
alloc.tablespace_name,
(alloc.total_allocspace_mb - free.free_space_mb) used_space_mb,
free.free_space_mb free_space_ext_mb,
((alloc.total_allocspace_mb - free.free_space_mb)/alloc.total_maxspace_mb)*100 pct_used,
((free.free_space_mb+(alloc.total_maxspace_mb-alloc.total_allocspace_mb))/alloc.total_maxspace_mb)*100 pct_free
FROM (SELECT tablespace_name,
ROUND(SUM(CASE WHEN maxbytes = 0 THEN bytes ELSE maxbytes END)/1048576) total_maxspace_mb,
ROUND(SUM(bytes)/1048576) total_allocspace_mb
FROM dba_data_files
WHERE file_id NOT IN (SELECT FILE# FROM v$recover_file)
GROUP BY tablespace_name) alloc,
(SELECT tablespace_name,
SUM(bytes)/1048576 free_space_mb
FROM dba_free_space
WHERE file_id NOT IN (SELECT FILE# FROM v$recover_file)
GROUP BY tablespace_name) free
WHERE alloc.tablespace_name = free.tablespace_name (+)
ORDER BY pct_used DESC
The above returns something like this:
MB MB % %
Tablespace Used Free Till Ext Used Free
APPS_TS_ARCHIVE 1,993.13 54.88 97.32 2.68
APPS_TS_TX_IDX 14,756.13 1,086.88 91.37 8.63
APPS_TS_TX_DATA 20,525.75 594.25 80.18 19.82
APPS_TS_MEDIA 6,092.00 180.00 74.37 25.63
APPS_TS_INTERFACE 13,177.63 366.38 71.49 28.51
The above works fine, but I would like to further change the query so that only those tablespaces with free space less than 5% (or used space more than 95%) are returned.
I have been working on this all morning and wanted to open it up to the masters!
I have tried using WHERE pct_used > 95 but to no avail.
Any advice would be appreciated.
Many thanks.
10.2.0.4
Linux Red Hat 4.

Thanks for that.
What is confusing is that the below query works for every other (about 10 others) database but not this one (?)
SQL> set lines 200 pages 2000
SQL>
SQL> col tablespace_name heading 'Tablespace' format a30 truncate
SQL> col total_maxspace_mb heading 'MB|Max Size' format 9G999G999
SQL> col total_allocspace_mb heading 'MB|Allocated' format 9G999G999
SQL> col used_space_mb heading 'MB|Used' format 9G999G999D99
SQL> col free_space_mb heading 'MB|Free Till Max' like used_space_mb
SQL> col free_space_ext_mb heading 'MB|Free Till Ext' like used_space_mb
SQL> col pct_used heading '%|Used' format 999D99
SQL> col pct_free heading '%|Free' like pct_used
SQL>
SQL> break on report
SQL> compute sum label 'Total Size:' of total_maxspace_mb total_allocspace_mb used_space_mb - free_space_mb (used_space_mb/total_maxspace_mb)*100 on report
SQL>
SQL> select /*+ALL_ROWS */
2 alloc.tablespace_name,
3 alloc.total_maxspace_mb,
4 alloc.total_allocspace_mb,
5 (alloc.total_allocspace_mb - free.free_space_mb) used_space_mb,
6 free.free_space_mb+(alloc.total_maxspace_mb-alloc.total_allocspace_mb) free_space_mb,
7 free.free_space_mb free_space_ext_mb,
8 ((alloc.total_allocspace_mb - free.free_space_mb)/alloc.total_maxspace_mb)*100 pct_used,
9 ((free.free_space_mb+(alloc.total_maxspace_mb-alloc.total_allocspace_mb))/alloc.total_maxspace_mb)*100 pct_free
10 FROM (SELECT tablespace_name,
11 ROUND(SUM(CASE WHEN maxbytes = 0 THEN bytes ELSE maxbytes END)/1048576) total_maxspace_mb,
12 ROUND(SUM(bytes)/1048576) total_allocspace_mb
13 FROM dba_data_files
14 WHERE file_id NOT IN (SELECT FILE# FROM v$recover_file)
15 GROUP BY tablespace_name) alloc,
16 (SELECT tablespace_name,
17 SUM(bytes)/1048576 free_space_mb
18 FROM dba_free_space
19 WHERE file_id NOT IN (SELECT FILE# FROM v$recover_file)
20 GROUP BY tablespace_name) free
21 WHERE alloc.tablespace_name = free.tablespace_name (+)
22 ORDER BY pct_used DESC
23 /
((alloc.total_allocspace_mb - free.free_space_mb)/alloc.total_maxspace_mb)*100 pct_used,
ERROR at line 8:
ORA-01476: divisor is equal to zero

Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verif

Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verifying and repairing it but had no luck. I also tried mounting and unmounting it but still no solution. Anyone to help please?

Looks bad. I would strongly advise backing up the stuff on the other two partitions as soon as possible in case the rest of the drive goes wrong.
Beyond that, Disk Utility has limited abilities to repair disks, DiskWarrior uses a different approach and might, emphasis might be more successful. It has certainly done the job for me in the past when Disk Utility could not.
See http://www.alsoft.com/diskwarrior/

Help needed, M getting this message sandbox environment error no test user account, when downloading any application from iTunes, friend told me to sign out and sign in iTunes it might solve the problem but instead I cannot login I to my itune account.

Help needed,
I am getting this message sandbox environment error no test user account, when downloading any application from iTunes, friend told me to sign out and sign in iTunes it might solve the problem , and i triyed it but still I cannot login I to my itune account. Same message keeping. Popping up, this problem started supricly today.

Take a look at the instructions here.
http://www.technogal.net/2012/03/this-is-not-test-user-account-please.html

While watching an iTunes movie from my Apple TV, why does my movie stop playing at the 1 hour mark? I'm assuming I have a setting causing this to happen, but I have no idea what setting needs to be changed. Can someone help me?

While watching an iTunes movie from my Apple TV, why does my movie stop playing at the 1 hour mark? I'm assuming I have a setting causing this to happen, but I have no idea what setting needs to be changed. Can someone help me?

It's right at an hour (consistently), but the computer goes to sleep prior to that. It's as if iTunes goes to sleep. Also, it wasn't always this way. Originally, the movies played through without interruption. At some point, I guess a setting was changed, and now I only get an hour. Also. My energy settings are set to go to sleep at 10 minutes.

Hey I have a problem. I want to change my rescue email address as somehow apple has the wrong one but I don't know my security questions - but you need one to change the other. Any help?

hey I have a problem. I want to change my rescue email address as somehow apple has the wrong one but I don't know my security questions - but you need one to change the other. Any help?

You can get your Security Questions reset by contacting iTunes Support at either of the two links below. Select the best options for your issue, or provide specific information. Let them know you are contacting them concerning Forgotten Security Questions. They will get back to you via your primary email address, usually within 24 hours. Once your Security Questions have been reset, you will be able to go in and reset your Rescue email address on your account:
http://www.apple.com/support/itunes/ww/
or by email:
http://www.apple.com/emea/support/itunes/contact.html
Cheers,
GB

Mileage Reimbursement rate for car needs to be changed -Pls help!!

Hello Gurus,
Currently I am working for european end markets for T&E module.
Iam facing a problem that:
I need to change the mileage reimbursement rate has changed for Belgium.
The mileage rate for Belgium needs to be changed for comp codes (BL01 and BL02) the new rate needs to be 0.2940eur/KM for own car mileage claims.
Since, i am new to payroll area, can some one pls help me.. where we track such changes? Is it done under payroll?
Pls advice for same...
Points assured
Thanks & regds,
N.babu

Hello Karthi,
I want to change the mileage rate for own cars for Belgium. It is for personnel area BL01 & BL02.
<b>The new rate has been changed to be 0.2940eur/KM for own car mileage claims.</b>
This will ensure that employees are being reimbursed the correct amount for their mileage cost when using their own car and travelling for business purposes
Hence I want to know, is there any settings we need to maintain in payroll?
Regds,
N babu

I need URGENT help, My company just changed all our iphones to Samsung Notes and i am now unable to get ANY messages from current iphone friends and colleagues colleagues.... This is certainly unfair and inconvenient.... Once loved apple not so much now

I need URGENT help, My company just changed all our iphones to Samsung Notes and i am now unable to get ANY messages from current iphone friends and colleagues colleagues.... This is certainly unfair and inconvenient.... Once loved apple not so much now

Go to: https://supportprofile.apple.com/MySupportProfile.do
Log in if not already logged in.
Click on "Edit Products"
Click on the "X" to the right of the product.
Click "Unregister".
If that doesn't work, you're going to need to call AppleCare and have them remove your phone from the system.
Best of luck.

I have forgotten my security question answers, i have tried to reset them but it keeps saying i need to save changes before i leave the page, i try to but it does nothing. help?

i have forgotten my security question answers, i have tried to reset them but it keeps saying i need to save changes before i leave the page, i try to but it does nothing. help?

Reset Security Questions
Frequently asked questions about Apple ID
Manage My Apple ID
Or you can email iTunes Support at iTunes Store Support.
If all else fails:
Go to: Apple Express Lane;
Under Product Categories choose iTunes;
Then choose iTunes Store;
Then choose Account Management;
Press Continue;
Now choose iTunes Store Security and answer the bullet questions, then click Continue;
Sign in with your Apple ID and press Continue;
Under Contact Options fill out the information and advise iTunes that you would like your security/challenge questions reset;
Click Send.
You should get a response within 24 hours by email.
Presently there appears to be problems on Apple's end, so it may be quite some time before they respond.
Another user had success doing the following:
I got some help from an apple assistant on the phone. It is kind of round about way to get in.
Here is what he said to do and it is working for me...
on the device that is asking you for the security questions go to "settings", > "store" > tap the Apple ID and choose view"Apple ID" and sign in.
Tap on payment information and add a credit/debit card of your preference then select "done", in the upper right corner
sign out and back into iTunes on the device by going to "settings"> "store" > tap the Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you should be asked to verify your security code for the credit /debit card and NOT the security questions.
At this time you can remove the card by going back in to edit the payment info and selecting "none" as the card type then saving the changes by selecting "done". You should now be able to use your iTunes store credit without answering the security questions.
It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
Good Luck friends!

I recently had to restore my Iphone 4s and ever since I cannot double click the home button whilst the phone is locked and change my music. The controls come up and I can adjust the volume but I cannot change the songs. Help needed please!!

I recently had to restore my Iphone 4s and ever since I cannot double click the home button whilst the phone is locked and change my music. The controls come up and I can adjust the volume but I cannot change the songs. Help needed please!!

Have you guys been able to activate your iphone yet? I bought an iphone 4s from eBay and it worked fine, but the previous user had left some data on it, so last night I used the "erased all content and settings" to restore it to factory setting so I can start fresh and restore my backup. But now I'm stuck at the activation screen (I get the same "the activation server is temporarily unavailable") and can't get it to activate, even if I use my old deactivated AT&T sim card (I'm on straighttalk now).
I might try activating it with an active AT&T sim card from my fiancee's phone when she gets home, so I'll let you know how that works outs.
If it's true that the server is down; anyone know when it will be back up again? Thanks in advance.
iPhone 4s iOS 5.1.1 (9B206)
Carrier AT&T 12.0
Modem Firmware 2.0.12

Changing App Store Location - Help needed

Hi, I have just been to USA and the App Store changed to the US and now I am back I am unable to update or download apps on my ipad as it says I have to switch to UK store. I have tried the settings itunes and apps but I it states that it is UK store and to change i need to spend remaining £s from a gift card but unable to purchase anything as it is US store not UK, Any help will be appreciated.

Change App Store
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3. Tap on your Apple ID
4.Tap "View Apple ID"
5. Enter your user name and password.
6. Tap "Country/Region."
7. Tap "Change Country/Region"
8. Select the region where you are located.
9. Tap "Done".

Changing DataSource Configuration using ConfigTool - Help Needed.

Hello Everyones,
I have an EP 7 which I have installed on a WAS ABAP + JAVA. The Data Soruce configuraion is in dataSourceConfiguration_abap.xml because of this I cannot create any new users in the Portal, can someone tell me how I can change this Config file using the ConfigTool and what procedure is to be used.
Thanks for your help,
John.
Message was edited by: John Bray

See Changing DataSource Configuration using ConfigTool - Help Needed.

Help needed in SUI changes testing

Similar Messages

Maybe you are looking for