Help needed in Table in Table Approach using OAF

We have a requirement in OAF wherein the results region of search page should give header details. And in header details there is a show and hide button which would show all the line details corresponding to the header (like Table – in – Table).
For Header details I have used advanced table under that I have used detail region and there I have created advanced table for line details.
I have also created view link to link the header details view object and line details view object.
In Process Request method of the controller I have set view link name and child attribute name for both outer table (header details table) and inner table (line details table)
When I run the OAF page, I am getting the below error. I am facing this error when I tried to set the view link name and child attribute of inner table (i.e. line details table) in the controller.
Detail 0 ##
java.lang.NullPointerException
     at oracle.apps.fnd.framework.webui.OAAdvancedTableHelper.updateInnerTableProperties(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAAdvancedTableHelper.processRequestAfterController(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanTableHelper.processRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAAdvancedTableHelper.processRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.beans.table.OAAdvancedTableBean.processRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.beans.layout.OAFlowLayoutBean.processRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanTableHelper.processRequest(Unknown Source)

Hi,
read the response above. This is the wrong forum.
try OA Framework
Frank

Similar Messages

Help needed Displaying ALV Secondary list without using oops concept

Hi Experts
Help needed Displaying ALV Secondary list without using oops concept.
its urgent
regds
rajasekhar

hi chk this code
******************TABLES DECLARATION*****************
TABLES : VBAP,MARA.
*****************TYPE POOLS**************************
TYPE-POOLS : SLIS.
****************INTERNAL TABLES**********************
DATA : BEGIN OF IT_VBAP OCCURS 0,
VBELN LIKE VBAP-VBELN, "SALES DOCUMENT
POSNR LIKE VBAP-POSNR, "SALES DOCUMENT ITEM
MATNR LIKE VBAP-MATNR, "MATERIAL NUMBER
END OF IT_VBAP.
****************TEMPORARY VARIABLES******************
DATA : V_VBELN LIKE VBAP-VBELN."SALES DOCUMENT
DATA : V_MTART LIKE MARA-MTART. "MATERIAL TYPE
*****************FIELD CATALOG***********************
DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
       WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
****************LAYOUT*******************************
DATA : WA_LAYOUT TYPE SLIS_LAYOUT_ALV.
***************VARIANT*******************************
DATA : G_VARIANT LIKE DISVARIANT.
****************SAVE*********************************
DATA : G_SAVE(1) TYPE C.
*****************EVENTS******************************
DATA : XS_EVENTS TYPE SLIS_ALV_EVENT,
       G_EVENTS TYPE SLIS_T_EVENT.
******************PF STATUS**************************
DATA : PF_STATUS TYPE SLIS_FORMNAME VALUE 'SET_PF_STATUS'.
******************USER COMMAND************************
DATA : USER_COMMAND TYPE SLIS_FORMNAME VALUE 'SET_USER_COMMAND',
       R_UCOMM LIKE SY-UCOMM.
****************SELECTION SCREEN************************
SELECT-OPTIONS : S_VBELN FOR VBAP-VBELN.
***************AT SELECTION SCREEN*********************
AT SELECTION-SCREEN.
PERFORM VALIDATE.
**************START-OF-SELECTION**************************
START-OF-SELECTION.
PERFORM GET_DETAILS.
PERFORM FIELDCAT.
PERFORM LAYOUT.
PERFORM VARIANT.
PERFORM SAVE.
PERFORM EVENTS.
PERFORM ALV_DISPLAY.
*********************FORMS*******************************************
*&      Form validate
      text
--> p1        text
<-- p2        text
FORM VALIDATE .
SELECT SINGLE VBELN
                FROM VBAP
                INTO V_VBELN
                WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
    MESSAGE E000 WITH 'enter valid vbeln'.
ENDIF.
ENDFORM.                    " validate
*&      Form get_details
      text
--> p1        text
<-- p2        text
FORM GET_DETAILS .
SELECT VBELN
         POSNR
         MATNR
         FROM VBAP
         INTO TABLE IT_VBAP
         WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
    MESSAGE E000 WITH 'no details found'.
ENDIF.
ENDFORM.                    " get_details
*&      Form fieldcat
      text
--> p1        text
<-- p2        text
FORM FIELDCAT .
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'VBELN'.
WA_FIELDCAT-OUTPUTLEN = 10.
WA_FIELDCAT-SELTEXT_L = 'SALES DOC'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'POSNR'.
WA_FIELDCAT-OUTPUTLEN = 6.
WA_FIELDCAT-SELTEXT_L = 'ITEM'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-OUTPUTLEN = 18.
WA_FIELDCAT-SELTEXT_L = 'MATERIAL NO'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM.                    " fieldcat
*&      Form LAYOUT
      text
--> p1        text
<-- p2        text
FORM LAYOUT .
WA_LAYOUT-ZEBRA = 'X'.
ENDFORM.                    " LAYOUT
*&      Form VARIANT
      text
--> p1        text
<-- p2        text
FORM VARIANT .
CLEAR G_VARIANT.
G_VARIANT-REPORT = SY-REPID.
ENDFORM.                    " VARIANT
*&      Form SAVE
      text
--> p1        text
<-- p2        text
FORM SAVE .
CLEAR G_SAVE.
G_SAVE = 'A'.
ENDFORM.                    " SAVE
*&      Form EVENTS
      text
--> p1        text
<-- p2        text
FORM EVENTS .
CLEAR XS_EVENTS.
XS_EVENTS-NAME = SLIS_EV_TOP_OF_PAGE.
XS_EVENTS-FORM = 'TOP_OF_PAGE'.
APPEND XS_EVENTS TO G_EVENTS.
ENDFORM.                    " EVENTS
*&      Form TOP_OF_PAGE
      text
FORM TOP_OF_PAGE.
WRITE :/ ' INTELLI GROUP'.
ENDFORM.                    "TOP_OF_PAGE
*&      Form ALV_DISPLAY
      text
--> p1        text
<-- p2        text
FORM ALV_DISPLAY .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
   EXPORTING
I_INTERFACE_CHECK              = ' '
I_BYPASSING_BUFFER             =
I_BUFFER_ACTIVE                = ' '
     I_CALLBACK_PROGRAM             = SY-REPID
     I_CALLBACK_PF_STATUS_SET       = PF_STATUS
     I_CALLBACK_USER_COMMAND        = USER_COMMAND
I_STRUCTURE_NAME               =
     IS_LAYOUT                      = WA_LAYOUT
     IT_FIELDCAT                    = IT_FIELDCAT
IT_EXCLUDING                   =
IT_SPECIAL_GROUPS              =
IT_SORT                        =
IT_FILTER                      =
IS_SEL_HIDE                    =
I_DEFAULT                      = 'X'
     I_SAVE                         = G_SAVE
     IS_VARIANT                     = G_VARIANT
     IT_EVENTS                      = G_EVENTS
IT_EVENT_EXIT                  =
IS_PRINT                       =
IS_REPREP_ID                   =
I_SCREEN_START_COLUMN          = 0
I_SCREEN_START_LINE            = 0
I_SCREEN_END_COLUMN            = 0
I_SCREEN_END_LINE              = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER        =
ES_EXIT_CAUSED_BY_USER         =
    TABLES
      T_OUTTAB                       = IT_VBAP
   EXCEPTIONS
     PROGRAM_ERROR                  = 1
     OTHERS                         = 2
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " ALV_DISPLAY
*&      Form SET_PF_STATUS
      text
FORM SET_PF_STATUS USING EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'Z50651_PFSTATUS' EXCLUDING EXTAB.
ENDFORM.                    "SET_PF_STATUS
*&      Form SET_USER_COMMAND
      text
FORM SET_USER_COMMAND USING R_UCOMM
                            RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
    WHEN 'DC'.
      READ TABLE IT_VBAP INDEX RS_SELFIELD-TABINDEX.
      IF SY-SUBRC = 0.
        SELECT SINGLE MTART
                      FROM MARA
                      INTO V_MTART
                      WHERE MATNR = IT_VBAP-MATNR.
        IF SY-SUBRC <> 0.
   MESSAGE E000 WITH 'NO MATERIAL DESCRIPTION FOR SELECTED MATERIAL NO'.
        ELSE.
          WRITE :/ 'MATERIAL NO :',IT_VBAP-MATNR.
          WRITE :/ 'MATERIAL TYPE :' , V_MTART.
        ENDIF.
      ENDIF.
    WHEN 'BACK'.
      LEAVE TO SCREEN 0.
    WHEN 'EXIT'.
      LEAVE TO SCREEN 0.
    WHEN 'CLOSE'.
      CALL TRANSACTION 'SE38'.
ENDCASE.
REPORT Z_ALV_INTERACTIVE MESSAGE-ID ZMSG_50651
                                LINE-SIZE 100
                                LINE-COUNT 60
                                NO STANDARD PAGE HEADING.
******************TABLES DECLARATION*****************
TABLES : VBAP,MARA.
*****************TYPE POOLS**************************
TYPE-POOLS : SLIS.
****************INTERNAL TABLES**********************
DATA : BEGIN OF IT_VBAP OCCURS 0,
VBELN LIKE VBAP-VBELN, "SALES DOCUMENT
POSNR LIKE VBAP-POSNR, "SALES DOCUMENT ITEM
MATNR LIKE VBAP-MATNR, "MATERIAL NUMBER
END OF IT_VBAP.
****************TEMPORARY VARIABLES******************
DATA : V_VBELN LIKE VBAP-VBELN."SALES DOCUMENT
DATA : V_MTART LIKE MARA-MTART. "MATERIAL TYPE
*****************FIELD CATALOG***********************
DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
       WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
****************LAYOUT*******************************
DATA : WA_LAYOUT TYPE SLIS_LAYOUT_ALV.
***************VARIANT*******************************
DATA : G_VARIANT LIKE DISVARIANT.
****************SAVE*********************************
DATA : G_SAVE(1) TYPE C.
*****************EVENTS******************************
DATA : XS_EVENTS TYPE SLIS_ALV_EVENT,
       G_EVENTS TYPE SLIS_T_EVENT.
******************PF STATUS**************************
DATA : PF_STATUS TYPE SLIS_FORMNAME VALUE 'SET_PF_STATUS'.
******************USER COMMAND************************
DATA : USER_COMMAND TYPE SLIS_FORMNAME VALUE 'SET_USER_COMMAND',
       R_UCOMM LIKE SY-UCOMM.
****************SELECTION SCREEN************************
SELECT-OPTIONS : S_VBELN FOR VBAP-VBELN.
***************AT SELECTION SCREEN*********************
AT SELECTION-SCREEN.
PERFORM VALIDATE.
**************START-OF-SELECTION**************************
START-OF-SELECTION.
PERFORM GET_DETAILS.
PERFORM FIELDCAT.
PERFORM LAYOUT.
PERFORM VARIANT.
PERFORM SAVE.
PERFORM EVENTS.
PERFORM ALV_DISPLAY.
*********************FORMS*******************************************
*&      Form validate
      text
--> p1        text
<-- p2        text
FORM VALIDATE .
SELECT SINGLE VBELN
                FROM VBAP
                INTO V_VBELN
                WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
    MESSAGE E000 WITH 'enter valid vbeln'.
ENDIF.
ENDFORM.                    " validate
*&      Form get_details
      text
--> p1        text
<-- p2        text
FORM GET_DETAILS .
SELECT VBELN
         POSNR
         MATNR
         FROM VBAP
         INTO TABLE IT_VBAP
         WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
    MESSAGE E000 WITH 'no details found'.
ENDIF.
ENDFORM.                    " get_details
*&      Form fieldcat
      text
--> p1        text
<-- p2        text
FORM FIELDCAT .
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'VBELN'.
WA_FIELDCAT-OUTPUTLEN = 10.
WA_FIELDCAT-SELTEXT_L = 'SALES DOC'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'POSNR'.
WA_FIELDCAT-OUTPUTLEN = 6.
WA_FIELDCAT-SELTEXT_L = 'ITEM'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-OUTPUTLEN = 18.
WA_FIELDCAT-SELTEXT_L = 'MATERIAL NO'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM.                    " fieldcat
*&      Form LAYOUT
      text
--> p1        text
<-- p2        text
FORM LAYOUT .
WA_LAYOUT-ZEBRA = 'X'.
ENDFORM.                    " LAYOUT
*&      Form VARIANT
      text
--> p1        text
<-- p2        text
FORM VARIANT .
CLEAR G_VARIANT.
G_VARIANT-REPORT = SY-REPID.
ENDFORM.                    " VARIANT
*&      Form SAVE
      text
--> p1        text
<-- p2        text
FORM SAVE .
CLEAR G_SAVE.
G_SAVE = 'A'.
ENDFORM.                    " SAVE
*&      Form EVENTS
      text
--> p1        text
<-- p2        text
FORM EVENTS .
CLEAR XS_EVENTS.
XS_EVENTS-NAME = SLIS_EV_TOP_OF_PAGE.
XS_EVENTS-FORM = 'TOP_OF_PAGE'.
APPEND XS_EVENTS TO G_EVENTS.
ENDFORM.                    " EVENTS
*&      Form TOP_OF_PAGE
      text
FORM TOP_OF_PAGE.
WRITE :/ ' INTELLI GROUP'.
ENDFORM.                    "TOP_OF_PAGE
*&      Form ALV_DISPLAY
      text
--> p1        text
<-- p2        text
FORM ALV_DISPLAY .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
   EXPORTING
I_INTERFACE_CHECK              = ' '
I_BYPASSING_BUFFER             =
I_BUFFER_ACTIVE                = ' '
     I_CALLBACK_PROGRAM             = SY-REPID
   I_CALLBACK_PF_STATUS_SET         = PF_STATUS
     I_CALLBACK_USER_COMMAND        = USER_COMMAND
I_STRUCTURE_NAME               =
     IS_LAYOUT                      = WA_LAYOUT
     IT_FIELDCAT                    = IT_FIELDCAT
IT_EXCLUDING                   =
IT_SPECIAL_GROUPS              =
IT_SORT                        =
IT_FILTER                      =
IS_SEL_HIDE                    =
I_DEFAULT                      = 'X'
     I_SAVE                         = G_SAVE
    IS_VARIANT                      = G_VARIANT
     IT_EVENTS                      = G_EVENTS
IT_EVENT_EXIT                  =
IS_PRINT                       =
IS_REPREP_ID                   =
I_SCREEN_START_COLUMN          = 0
I_SCREEN_START_LINE            = 0
I_SCREEN_END_COLUMN            = 0
I_SCREEN_END_LINE              = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER        =
ES_EXIT_CAUSED_BY_USER         =
    TABLES
      T_OUTTAB                       = IT_VBAP
   EXCEPTIONS
     PROGRAM_ERROR                  = 1
     OTHERS                         = 2
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " ALV_DISPLAY
*&      Form SET_PF_STATUS
      text
FORM SET_PF_STATUS USING EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'STANDARD' EXCLUDING EXTAB.
ENDFORM.                    "SET_PF_STATUS
*&      Form SET_USER_COMMAND
      text
FORM SET_USER_COMMAND USING R_UCOMM
                            RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
    WHEN 'DC'.
      READ TABLE IT_VBAP INDEX RS_SELFIELD-TABINDEX.
      IF SY-SUBRC = 0.
        SELECT SINGLE MTART
                      FROM MARA
                      INTO V_MTART
                      WHERE MATNR = IT_VBAP-MATNR.
        IF SY-SUBRC <> 0.
   MESSAGE E000 WITH 'NO MATERIAL DESCRIPTION FOR SELECTED MATERIAL NO'.
        ELSE.
          WRITE :/ 'MATERIAL NO :',IT_VBAP-MATNR.
          WRITE :/ 'MATERIAL TYPE :' , V_MTART.
SUBMIT SLIS_DUMMY WITH P_MATNR EQ IT_VBAP-MATNR
                    WITH P_MTART EQ V_MTART.
        ENDIF.
      ENDIF.
    WHEN 'BACK'.
      LEAVE TO SCREEN 0.
    WHEN 'EXIT'.
      LEAVE TO SCREEN 0.
    WHEN 'CLOSE'.
      CALL TRANSACTION 'SE38'.
ENDCASE.
plz reward if useful

Help needed for report on tables vbak and vbap

Hello,
I needed help in one of my work issues, this is my first project and Iam still learning. kindly help.
I was asked to take erdat,vbeln,posnr from selection screen and compare it with the data already in tables vbap,vbak. If the data
already exists and exception needs to be raised saying that the 'data exists',but if the data is not present in the tables the
tables have to be updated. This has to be done using function module only.
Then I have to write a REPORT calling the above function module and finally displaying the number of records updated and the
list of them.
I have started writing a function module:
FUNCTION z_tableupdate.
""Local Interface:
*" IMPORTING
*"     VALUE(DATE) LIKE VBAK-ERDAT DEFAULT SY-DATUM
*"     VALUE(SALESORDERNO) LIKE VBAK-VBELN
*"     VALUE(ITEMNO) LIKE VBAP-POSNR
*" EXPORTING
*"     VALUE(EX_VBAP) LIKE VBAP STRUCTURE VBAP
*"     VALUE(SYS) LIKE SY-SYSID
*"     VALUE(EX_VBAK) LIKE VBAK STRUCTURE VBAK
*" EXCEPTIONS
*"      DATA_UPDATED
*"      DATA_EXISTS
SELECT * FROM vbak INTO vbak_wa WHERE erdat = date
                                    AND vbeln = salesorderno.
ENDSELECT.
SELECT * FROM vbap INTO vbap_wa WHERE posnr = itemno.
ENDSELECT.
IF sy-subrc EQ 0.
    ex_vbap = vbap_wa.
    ex_vbak = vbak_wa.
ELSE.
    RAISE data_exists.
ENDIF.
sys = sy-sysid.
ENDFUNCTION.
How is the above code for function module, will this work??
Now can I write a report to call the above function module and update the record?? if so, how to update ??? please help...Lots of thanks in advance.

Hi
Welcome to SDN forum
Whay can't you write a simple report in SE38.
why you are using Fun module
Nothing wrong in it.
But first become perfetc in reports in SE38 and then do using the fun modules
write a simple select statement like
SELECT AVBELN AERDAT BPOSNR BMATNR
INTO TABLE ITAB
FROM VBAK AS A JOIN VBAP ON
AVBELN = BVBELN
WHERE A~VBELN IN S_VBELN AND
             A~ERDAT IN S_ERDAT AND
             B~POSNR IN S_POSNR.
IF SY-SUBRC <> O.
WRITE: / 'No data found'.
ENDIF.
First write this in SE38 by defining a proper selection screen and internal tables
then do as fun module
see the doc for fun module
Function Modules;
Check this matter.
Function Modules are Global ABAP programs created by SAP for reusable purpose.they have IMPORT,EXPORT and TABLE parameters, and EXCEPTIONS to through when error occurs.
You can create them from TCode SE37.
Go through the following doc:
Function modules are cross-program, reusable procedures that are organized into function groups, and whose functions are implemented between the statements FUNCTION and ENDFUNCTION. Function modules and their interfaces are created in the Function Builder.
Function Module Interfaces
The parameter interface of a function module is defined in the Function Builder. It includes the definition of interface parameters and the specification of exceptions that can be triggered by a function module. The Function Builder automatically generates comment lines below the FUNCTION statement in the source code of the function module, which represent the interface of the function module with the following syntax:
Syntax
... [IMPORTING parameters]
[EXPORTING parameters]
[CHANGING parameters]
[TABLES table_parameters]
[{RAISING|EXCEPTIONS} exc1 exc2 ...]
The syntax and semantics of IMPORTING, EXPORTING, CHANGING, RAISING, and EXCEPTIONS mainly correspond to the definition of method interfaces with [CLASS-]METHODS. The additional option of defining table parameters using TABLES is obsolete.
Interface parameters
The interface parameters are defined on the relevant tab pages in the Function Builder.
IMPORTING parameters are input parameters. When the function module is called, a suitable actual parameter must be specified for every non-optional input parameter. The content of the actual parameter is passed to the input parameter when the call is made. The content of an input parameter for which 'pass by reference' is defined cannot be changed in the function module.
EXPORTING parameters are output parameters. When the function module is called, a suitable actual parameter can be specified for every output parameter. The content of an output parameter that is defined for 'pass by value' is transferred to the actual parameter if the function module is completed without errors. An output parameter that is defined for pass by reference is not initialized when the function module is called.
CHANGING parameters are input and output parameters. When the function module is called, a suitable actual parameter must be specified for every non-optional input or output parameter. When the function module is called, the content of the actual parameter is passed to the input/output parameter, and when the function module is completed, the content of the input/output parameter is passed to the actual parameter.
TABLES parameters are table parameters. Table parameters are obsolete CHANGING parameters that are typed as standard tables with a header line. If an internal table without a header line or a table body is passed as an actual parameter to a formal parameter of this type, an empty local header line is generated in the function module. If an internal table with a header line is used as an actual parameter, both the table body and the header line are passed to the function module. Pass by value is not possible in formal parameters defined using TABLES. Formal parameters defined with TABLES can be replaced by formal parameters defined with CHANGING. A local work area can be created for the internal table in the function module by using the addition LIKE LINE OF itab of the DATA statement.
Exceptions
The exception of a function module are defined on the Exceptions tab page in the Function Builder. Here you can select exception classes to define whether class-based exceptions are declared or non-class-based exception are defined. Class-based exceptions are represented in the above syntax by RAISING, and non-class-based exceptions are represented by EXCEPTIONS.
The addition RAISING is used to declare class-based exceptions that can be propagated from the function module to the caller. Exceptions in the categories CX_STATIC_CHECK and CX_DYNAMIC_CHECK must be explicitly declared, otherwise a propagation can lead to an interface violation. A violation of the interface leads to the treatable exception CX_SY_NO_HANDLER. Exceptions of the category CX_NO_CHECK are implicitly always declared. The declaration of exceptions of the category CX_STATIC_CHECK is statically checked in the syntax check. For exceptions of the category CX_DYNAMIC_CHECK, the check is not performed until runtime. In a function module in which class-based exceptions are declared with the RAISING addition, the statement CATCH SYSTEM-EXCEPTIONS cannot be used. Instead, the relevant treatable exceptions should be handled in a TRY control structure.
The addition EXCEPTIONS is used to define a list of non-class-based exceptions that can be triggered in the function module using the statements RAISE or MESSAGE RAISING. Exceptions defined in this way - as with formal parameters - are bound to the function module and cannot be propagated. If an exception of this type is triggered in a function module, and no return value has been assigned to it with the homonymous addition EXCEPTIONS of the CALL FUNCTION statement when the call was made, this leads to a runtime error.
Note
For new developments after release 6.10, SAP recommends that you work with class-based exceptions that are independent of the function module.
RFC is a technology which is used to access a functions (Modules) from
the remote systems.
If a function module is set as remote enabled which can be access from
the remote system via RFC.Eg: U can access the Remote enabled function modules in ur VB,Webdynpro,Java,Visual composer program.
A function module can be set as remote enabled by SE37->Go to ur FM->click the option Button "remote enabled".
But Normal function modules can not accessd from the remote system.
Good Example for RFC enabled function module is : BAPI(Business Application Programming Interface)
Note: All BAPIs are Remote enabled but not all remote enabled function modules are BAPI.
CALLING A FUNCTION MODULE:
1)In U ABAP Editor --> Click "Patter" ---> Selection Option Button "Call Function"
--> Write the Corresponding FM name --> Hit Enter
2)The appropriate import ,export Parameters will be displayed in ur editor
3)Pass the Values Here.
Also check these links.
http://www.geocities.com/victorav15/sapr3/abapfun.html
Check this link:
http://help.sap.com/saphelp_erp2004/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/d94b78ebf811d295b100a0c94260a5/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm
Check this link:
http://help.sap.com/saphelp_erp2004/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/d94b78ebf811d295b100a0c94260a5/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm
See the following links:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/26/64f623fa8911d386e70000e82011b8/content.htm
Regards
Anji

Help needed XML to Internal table and vice versa

Hello frnds, I need to convert Internal table to XML and Vice versa.
Now I am able to most of the part except for this...
the xml which I have to generate looks something like this...
- <trade_dt>
- <![CDATA[ 20111108000000:20111108235959
]]>
</trade_dt>
its a range I think
And then the reponse which I get back the XML is like
- <lockinfo>
- <![CDATA[
TRD_HEADER     1045     1          2
ACT_CASHFLOW     1042               1
TRD_TERM     1045               2
]]>
</lockinfo>
Is there any provision in class cl_ixml or class if_ixml_element to handle this part.....
Edited by: Amit Sawant on Dec 28, 2011 3:51 PM

Hello Amit,
I would suggest you, to use the XSL-Transformations, which can be inbound used in ABAP.
For example:
DATA:
l_xml       TYPE string,
lt_flights TYPE TABLE OF SFLIGHT.
SELECT * FROM SFLIGHT INTO TABLE LT_FLIGHT.
CALL TRANSFORMATION id
SOURCE DATA = lt_flights
RESULT XML l_xml.
Now, you have a XML-String which is in the ABAP-XML Notation, which means, that ABAP can move this XML-Data back into an internal table/structure.
For the backward, you have to use the following statement:
CALL TRANSFORMATION id
SOURCE XML l_xml
RESULT DATA = lt_flights.
As you will see, it is very easy. The Transformation "id" is just one example and build in. When you have to transform the data, or do not want to have the ASX-Notation in it, you should at least define your own transformations with the transaction XSLT_TOOL and use it similar to the transformation "id".
Kind Regards,
Hendrik

Help needed with comparing two tables

Hi
I have two tables which have same column names but different entries in each one of them and some common entries between the two tables.
Table A has all the entries of Table B and some extra ones.. and I need SQL to give me those extra ones that are not in Table B
Table A columns names (col1, col2 col3 ...) and data
col1 col2 col3 col4 col5 col6
a1 a2 a3 a4 a5 a6
b1 b2 b3 b4 b5 b6
c1 c2 c3 c4 c5 c6
d1 d2 d3 d4 d5 d6
All columns are varchar2
Table B columns names ( col1,col2 ..) and data
col1 col2 col3 col4 col5 col6
a1 a2 a3 a4 a5 a6
c1 c2 c3 c4 c5 c6
All columns are varchar2
So the answer I would like to get is
b1 b2 b3 b4 b5 b6
d1 d2 d3 d4 d5 d6
because these two entries are not in Table B but in Table A
Appreciate if you can help me with this because I have millions of records that I need sort through and get the entries and cannot be done manually..
Thanks in Advance
Kris

Here is an example:
SELECT 'X' FROM DUAL UNION SELECT 'Y' FROM DUAL
MINUS
SELECT 'X' FROM DUAL;
Y

Help Needed in developing simple Chatting application using flex and blazeds

Hi,
I followed this tutorial from adobe http://learn.adobe.com/wiki/display/Flex/Creating+a+BlazeDS+messaging+application+in+Flex+ Builder i installed tomcat server and set the path.I am unable to open server like this http://localhost:8080 but i can able to open that in this way http://127.0.0.1:8080/ .... When i create my new flex project in flash builder 4 i am getting this error
You do not have write permission for the project output folder. Specify another location.
can any one help me in how to get rid of this problem.I hope this forum helps me in finishing my flex project..
Thanks
Trinethra

Hi,
Need to use a scrollable resultset and depending on the need to have a stateful connection or a stateless connection you may need to query the table for every request(for stateless connection) and use the same result set for(stateful connection). and depending on the no of records in a page and the page no do some simple arithmetic and move the resultset. Hope this helps.
rajesh

Urgent help needed!! Layout table and Draw layout cell dissapeared.

I need some urgent help. I'm using CS3 but for a while my
Layout Table and Draw Layout Cell icons appear greyed and can't use
them at all. Is there any kind soul out there who knows how to fix
this? I'm going nuts trying all the possible options but none seem
to work.
Help please!!!!!!

> How would you about designing a page without using html?
You don't. But I don't recall suggesting that you not use
HTML. I just
suggested that you use best-practice HTML, no? Or maybe you
meant to ask
how you would go about building your site without learning
HTML? In that
case, I think you are outta luck. Using DW without knowing
HTML is a very
punishing experience, I'm afraid.
> PS: A virtual box of 12 bottles of Moet Chandon is
already on your way!!
I'd prefer Cristal, please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Untersberg" <[email protected]> wrote in
message
news:g4tj9a$m5o$[email protected]..
> Ahhhhhh!!!!! They came up!!!! They came up again!!
> I was on standard mode. Now going back to your
suggestion, which I really
> appreciate. How would you about designing a page without
using html? I'm
> just
> redesigning my website at the moment and need it to get
going urgently,
> hence
> the reluctance to start learning HTML at the moment.
I'll do after but I
> need
> to get this up and running fairly quickly.
>
> Cheers.
>
> PS: A virtual box of 12 bottles of Moet Chandon is
already on your way!!
>

Help needed in creating a table that updates itself at runtime.

I am working on creating a sniffer in java and need a GUI that will show the incoming packets as they are sniffed. How can I use tables such that they automatically update as and when the packets arrive.
Any help on this matter would be appreciated thanks
hasrar

Hello, I am working in a Sniffer in java too, but I have not information about this.
I want to tell you if you can send me some information or examples.

Help needed with conditions in Table View

Another question regarding the dashboard we are building:
We use a custom function module to display marketing attributes for a particular customer. There are three kinds of marketing attributes of which we want to display the value:
- Z_QUADRANT
- Z_SOW
- Z_WALLET
If I use the function module as a data service in Visual Composer and use a standard table view as ouput, we get these kind of output:
Atnam - Atwrt - Atflv - Atzhl (<-- these are the column labels)
Z_QUADRANT - 4 - 0 - 0
Z_SOW - 0 - 5 - 0
Z_WALLET - 0 - 75.000 - 0
I just want to display the data as follows:
QUADRANT: 4
SOW: 5%
WALLET: 75.000
So I need to hide the obsolete fields and values and just need to display the relevant values. How can I achieve this? I was guessing I needed to implement some sort of conditional formula like "IF atnam = Z_QUADRANT, display Atwrt(value)" or something, but I am terrible at these kind of things. Can somebody explain it to me or point in the right direction of some good documentation or guide on this? Thanks in advance!
Best regards,
Jan Laros

I now chose to use a form which uses the output from the tables. This is the table I use as input for the form:
http://tweakers.net/ext/f/DWmYaePz4gdzVhwMJ3naA5UQ/full.jpg
I use the following formula for the quadrant:
IF(@ATNAM=="EU_BP_NPS_QUADRANT",@ATWRT,"0")
This returns a value of "4" which is correct.
For SOW I use the following formula:
IF(@ATNAM=="EU_BP_NPS_SOW",@ATFLV,"WRONG")
Strangely enough the return value is "WRONG" in the form. What am I missing here?
Regards,
Jan

Help needed in partitioning a Table

Hi,
We can partiton a table by the following
create table sales (
     product_id     number,
     trans_amt     number,
     sales_dt     date,
     state_code     varchar2(2)
partition by list (state_code)
partition ct values ('CT'),
partition ca values ('CA'),
partition def values (default)
But if we dont know the values like 'CT' , 'CA' ....how can we do the partition

If you really don't know the values at all, or values that can change in future, use hash-partitioning.
For values that you mostly know and is unlikely to change, use list-partitioning, and accept you to do some maintenance in shuffling values around the partitions when they change.
But, hopefully you do know your states and they don't change too often.

Help needed in downloading int table

Hi All,
I have to download an internal table into an Excel file in directory "c:\...." using file name: UPLD_YYMMDD_#, where # changes if more than 1 file
is run on any date. Ex: UPLD_080222_1, UPLD_080222_2, etc.
How can i do this with different file nos changing?
Thanks in advance.

You could use this FM TMP_GUI_GET_FILE_EXIST to check if the file exists...Otherwise, you assign a different number...
Greetings,
Blag.

Help needed for updating a table

install date cost term jan02 feb02 mar02 apr02 may02 jun02
jan 02 30 3 10 10 10
feb02 120 6 20 20 20 20 20 20
mar02 25 5 5 5 5 5 5
The table contains all the columns seen above, try to write a script which will update the months column(jan02 feb02...jun02) with the cost(cost/term) depending on the install date and the term.
ex: if the term is 3 months I have to update jan feb and mar with the cost/term value spilt across 3 months
if the term is 6 months I have to update jan feb mar apr may jun with the cost/term value spilt across 6 months
if the term is 5 months I have to update jan feb mar apr may with the cost/term value spilt across 5 months

Oops, copy and past mistake. This is better:
update your_table
set jan02 = decode(greatest((term-1)*-1, 0), 0, cost/term, null)
, feb02 = decode(greatest((term-2)*-1, 0), 0, cost/term, null)
, mar02 = decode(greatest((term-3)*-1, 0), 0, cost/term, null)
, apr02 = decode(greatest((term-4)*-1, 0), 0, cost/term, null)
, may02 = decode(greatest((term-5)*-1, 0), 0, cost/term, null)
, jun02 = decode(greatest((term-6)*-1, 0), 0, cost/term, null)

Some help needed on dynamic internal tables and field symbols

Hi,
I have a dyn internal table <dyn_table_r>.
One of its fields is kna1-kunnr.
I have another wa <fs>, with only one field alt_kunnr.
now i want to modify the data of <dyn_table_r>-kna1-kunnr from <fs>-alt_kunnr
How should i do it?
Regards ,
Harshit Rungta

Harshit Rungta:
You have opened a number of related questions today. I'd like to see the other ones closed before you continue with this one.
I'll lock this but will re-open it once the others are marked as solved.
Rob

URGENT HELP NEEDED. IS "JE_LINE_NUM" FROM GL_INTERFACE USED in 11.03 or 11i?

Please help!
I need to make an import from a custom Payroll application into GL. Everything would be working just fine, if I could use the JE_LINE_NUM from GL_INTERFACE table. In the tech documentation it was stated that this column is not used in version 10. Nothing stated about 11.03 or 11i
If this doesn't work, any ideea how could I manage the journal detail line number the transaction is imported?
THANK YOU VERY MUCH.
Please answer at: [email protected]

If I interpreted your requirements correctly, you wish to supply the JE_LINE_NUM in the GL_INTERFACE table.
Unfortunately, you cannot do so. The GL_INTERFACE.JE_LINE_NUM column must be NULL for Journal Import to function correctly. This is mentioned in the User's Guide. Since the grouping of lines into batches and headers is done dynamically by journal import, it is not possible to support a user-specified journal line number. This will cause duplicates or gaps.
This is true for all GL releases.

Help, need simple instructions on how to use numbers with keyboard.

I just got Numbers for IPAD 2 and I am new to Spreadsheets in general. I simply cannot understand how to use this program with my mini external keyboard (gotten from Apple) to make it do what I need it to do. I am trying to set up a spreadsheet for my Jewelry Design Business. It's an inventory Spreadsheet, listing each item, the number of the item, the title, description, price and final sold price and type of Jewelry. I need the two price columns to add the sum of all the jewelry in each row, which by some miracle I was actually able to do. What I am having trouble with is getting it to automatically change to dollars for the two price columns without having to touch the dollar sign on the formula bar each time I enter a new item, and getting it to jump from the last cell in the last column to the first cell of the first column when I am finished with a row and need to go to the next item. What it does do is either jump to the cell right beneath it, or go backwards, or sometimes it does go to the first cell of the next line, but I don't know what I am doing to make that happen. Anyway being new to this all, it is obvious I need specific simple instructins on how to use this program. Does anybody know where I can find some help?

IMHO, forget about doing any meaningful Excel work an iPad unless you want to be a slave and spend 3-4 times the amount of time it would take to do inputs on a normal computer. Now, IF there was mouse support, then it might be worth the effort. I tried it and gave up.

Help needed in Table in Table Approach using OAF

Similar Messages

Maybe you are looking for